Error code 23 Bulletin Board.

Similar Questions

• Satellite L650-1PE - error in Toshiba bulletin board messages

  I received error messages when I try to use Toshiba bulletin board, so first I got error 3 and then I press ok and I got error 23 which I do not know why? Also, my laptop Satellite L650-1PE.

  Also, I uninstalled and reinstall the latest version again, but I got the same error messages. Please can someone help me with this.

  Thanks in advance.

  Hello

  What error messages you get exactly? Maybe you can post a screenshot of these messages.

  What operating system you are using?
  You use the preinstalled version of Windows 7 in Toshiba or another version?

• I get an error message in my portfolio of fianance Yahoo when I click on the Bulletin Board.

  When I am in Yahoo Finance, my portfolio, I can't go in for any of my symbols message board.
  I get this message. Error retrieving data (error Code: MBHo_404404_1MBBa_INVALID_STATUS)
  Help, please.

  This seems to be a matter of Yahoo:
  http://answers.Yahoo.com/question/index?QID=20130110034630AA9Mpav

  It seems to happen with several browsers.

• GlobeTrotter 3 G in TECRA M2, conflict error Code 10.

  Hello

  Just installed a Globetrotter 3 + in my Tecra M2 and I got and error Code 10. Ask the dealer appears to be related with IRQ however I have not the slightest idea of what is in conflict with the card. I tried to disable most of the hardware, but the error persists.

  I'd appreciate any help on this.

  Thank you
  JOINT APPEALS BOARD

  Hey jabertolin,

  I'm not very familiar with the 3G technology, but I found this article:

  http://www.3G.co.UK/3GForum/showthread.php?t=38445

  I think it s definitely not a problem to toshiba, in order to check this forum and maybe you can get a solution to your problem.

  Good luck
  See you soon

• Satellite 5100 - error code: 4 short Flash, 1 x long, 3 short films

  Hi all

  After I accidentally served Coke for my satellite 5100 503, it was totally cut off. My brother managed to clean it up, and it began. But shortly after, she turned to and just give this error message by flashing the power before conduit: 4 x SHORT 1 x LONG, 3 x SHORT

  I managed to interpret it using some web sites. This is a 10: 00 hex code and means: 'AC output voltage adapter's more than 16.5 V.

  And here's what they recommend, if the adapter is ok (and it is, I checked):

  After checking the connection, follow these steps:
  Check 1
  Replace the AC adapter with a new one. If the adapter does still not work, try 2 check.
  Check the box 2
  Use a multimeter to make sure the F8800 fuse on the motherboard is not blown. If not, the fuse is broken, go to 3 check. If the fuse is broken, go to test 6.
  Check 3
  Use a multimeter to make sure the F1000 fuse on the battery tray is not grilled. If not, the fuse is broken, go to 4 check. If the fuse is broken, replace the battery with a new one by following the instructions in Chapter 4.
  Check 4
  Make sure battery cables Council are well connected to PJ8820 and PJ8821 on the system board and PJ1000 and PJ1001 on the map of the battery. If they are firmly connected, go check 5.
  Check 5
  The battery or System Board may be damaged. Replace it with a new one by following the instructions in Chapter 4.

  Do you think I should go ahead and change the whole motherboard? I don't think it is a fuse, because sometimes the laptop starts and stays on for 10-15 minutes before turning off. In addition, it does not work with the battery! Only the sector...

  Thanks for you comments, but I really wonder how did you find the error code mean?
  The Satellite 5100 has been delivered with the Toshiba BIOS!
  Please note that different BIOS provide different error codes.
  This means that the 10 h error code mean Phoenix BIOS, something different than the Toshiba BIOS!

  I recommend to contact the ASP in your country and ask the details of error code.

  PS: One of my friends did the same. Shake the glass of coke on the keyboard, and the laptop has been cut.
  New bad dude... the motherboard has been replaced.

• Satellite A65-S126: I get error codes 7 and 4 - need to replace the internal RAM

  I was making mistakes first when I boot.
  Windows has a file missing or currupted (isapnp.sys).
  So I try to make a startup disk XP repair and while it is endearing to copy files, I receive other errror ' blah blah error code is 7 or 4.

  I did some research on all three errors and every difficulty unique potintial ram bad or bad Bios settings. I tried to reset the cmos and I've updated since the last version of toshiba. Always the same thing.

  I also replaced the ram with two sticks, that I had. The same problem. I think there must be some on board the cause of ram that I can get out the chip from the bottom and the laptop will always start and says it has installed 256.

  Where and how we replace RAM or what do you think?

  Thank you.

  Have you tested the memory? You can use Memtest www.memtest.org which is a floppy disk or a CD.

  Perhaps the error is just guessing what the problem is. File copy errors can also be caused by a scratched or damaged CD, bad CPU, defective HARD drive, faulty DVD drive or motherboard. If Memtest passes, then test the hard drive for bad sectors.

• CPU 1326DX Pavilion G7 error code

  I'm working on this machine for my friend.  They initially stripped on it because it gave them an error that says the fan from the cpu had to be replaced.  After I did it, I got the constant flashing error codes.  So I did some research and discovered the design flaw to inherit the mothers on these books.  And considering that the Board was probably hot enough with the failure of fan, I replaced the motherboard.  Now, I'm getting a CPU error code blink.  What is your opinion?  I'm down to replace the AMD processor now, or is there something else I need to check?

  When I replaced the motherboard, I carefully cleaned any thermal paste and replaced with the stuff of money.  I also quadruple checked all my connections... but I am always open to ideas.

  Thank you very much for your help.

  Hi Oorin,

  You can try reinstalling the HARD disk? With the flashing lights continuously, it could be the BIOS.  Have you tested the HARD drive?

  If the HARD drive reinstalling does not help, try reinstalling the memory.

  Have you tried a power reset with the RTC battery removed?

  Let me know.

  Thank you.

• VIsa error code: 1073807195

  I have set up a debug for coding environment. I use c# mode for remote debugging. The program running on my laptop and camera and GPIB Board are on another machine. When my code (laptop) run this sentence: mbSession = (MessageBasedSession (ResourceManager.GetLocalManager(":GPIB0:16:INSTR"). There is a mistake: the interface type is valid, but the number of specified interface is not configured.  VISA-1073807195 (0xBFFF00A5), ErrorInterfaceNumberNotConfigured error code. But I can't find the instrument by NIMAX (on another machine). So I guess I have to use my laptop to install the device control and GPIB card directly. Am I wrong? Now the problem is that my laptop can't install a GPIB card and I have to use this mode for remote debugging. How can I do? does anyone have experience?

  Hardware solution: use a USB-HS-GPIB adapter

  Software solution: try "VISA of distance." See How can I check my VISA from another computer device?

• USRP-1074118634 error code, niUSRP write data Tx (CBD Cluster) .vi < ERR > cannot find a GPSDC

  Hello I want to generate a GPS using the USRP-2920 and then plug it into a GPS evaluation kit to verify if the evaluation board can see the satellites, so I run the example

  https://decibel.NI.com/content/docs/doc-22178

  Everything looks OK, it starts with the legend Buffering Waveform, when it reached 100 I clicked the play button and the program stopped and send this error code:

  -1074118634

  and source:

  niUSRP write data Tx (CBD Cluster) .vicould not find a GPSDC

  Could someone help with this?

  Thank you

  Carlos.

  Carlos,

  What versions of LabVIEW, NI USRP and GPS Toolbox driver do you use?  I noticed the example that you referenced the States ensure to use an external OCXO since the TCXO on the series 292 x is not precise enough.  What is happening in RefIn?

• HP DesignJet 1055CM: hp 1055 09c 000 error code

  I get the error code following the HP DesignJet 1055 CM after that I turn on.  Error Code 09C000 007A023C.

  09 errors are related to the eio devices.  First thing you want to do is to turn the power off and then remove all eio devices you have.  They will be either a hard drive or a network card.  Now put the plotter and see if it comes to loans without the error.  If only they we features eio is bad.  Most of the time, it's the network card.  According to the model of the network adapter, you can sometimes repair with bicarbonate.  If the card is a look 610n or 615n for cooking instruction on this forum.  If the error is still there without network cards installed, then the main Board must be replaced.

• Error Code 800706BE and the 800706BE error Code could not update windows. CSP as also stopped working.

  I can't update windows. I get to 800706BA and error Code 800706BE codes. I also get frequent error messages that Cryptographic Services like stopped working. I would really like to fix this way! Thank you.

  OPTION A:

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  OPTION B:

  You see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired at thetime the first machine was infected and/or your subscription has expired since or the machine is not been kept fully patched in Windows Update constantly, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now run a thorough check for hijackware, including registration required before a proper Court, logs don't here. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 8007000 b error code

  OK, I tried to download updates from windows updates, but it keeps giving me the same error 8007000 b. code I tried the real resource setautoreset C:\ solutionfsutil and he says it works, but then I went to install the updates and then it gives me the same error code. I also tried the 'fix it' application to the Board of microsoft, which does not solve the problem. I even went and reinstalled windows with the cd that came with my laptop and still... nothing! I am at a total loss, so if anyone has an idea on how to solve this problem I am entirely grateful. Thanks in advance.

  Have you tried such support as mentioned in the article?

  Check whether the problem is resolved. If the problem is resolved, you are finished with this article. If the problem is not fixed, you cancontact support (http://support.microsoft.com/contactus).

  http://support.Microsoft.com/kb/956699/

  TaurArian [MVP] 2005-2011 - Update Services

• Windows 7 1 800700 update error code

  It is with Windows 7 Home Premium 32 bit. When you try to update. I get this error code and it won't dl/install updates. I never had this problem before and she appeared just not the case. No idea how to solve this problem?

  OPTION A: For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance:https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  For enterprise customers, support for security updates is available through your usual support contacts.

  OPTION B: There is a good chance that you see the effects of a hijackware infection.

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now run a thorough check for hijackware, including registration required before a proper Court, logs don't here. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• error code 0x8007f0f4 on security update for windows XP

  I get an error code: 0x8007f0f4 on a security update for windows XP (KB2481109) can someone help me with this?

  I need emergency assistance.

  Thank you

  Ok. I am back.

  Have you tried the manual steps in the bulletin after the correction, it did not work? Please answer.

  Start > run > type chkdsk/r > press on enter or OK > enter Y at the prompt > Reboot

  When she returns to the top, click on start > run > eventvwr.msc > press on enter or OK > go to Application, Type: Information, Source: Winlogon. Paste and copy in a txt file and then try to download and install the manual update of http://www.microsoft.com/downloads/details.aspx?FamilyID=D67E4D8C-AEB9-45E6-9555-7456C5540475

  If it fails, paste the contents of the file txt on your next reply. Also download the KB2481109.log on your SkyDrive (if you have an account here, you automatically have a SkyDrive account) public folders and add the URL of it to the next reply.

  I fear that we will have to do a replacement of manual file in the end, but let's try this first.

• HP Laserjet M9050 MFP: Scan error Code 30.01.16

  I have a HP Laserjet M9050 MFP Firmware: 51.051.4

  The printer was woking fine so far, but played upward...

  I get an error Scan on the screen 30.01.16 Code, have searched online and this indicates that the scanner ADF need of recalibration.

  Normally the 30.01.16 error code will remain on the screen, but if I take off the cable behind the scanner it-displayed meaning I can access the control panel and enter the menu etc.

  I tried to re - calibrate the, but it doesn't seem to work, someone has another idea about what it takes to solve this problem.

  Hahaha...

  Be sure to save the configuration when you do something.

  Well, the solutions were:

  (1) printer tour

  (2) remove trainer card and unplug the hard drive

  (3) re - connect trainer Board and open the ADF tray, printer

  4) go to Services, then calibration width ADF and calibrate as on-screen instructions.

  (5) DON'T FORGET TO SAVE THE SETTINGS.

  (6) turn on the printer and remove trainer card and reconnect the hard drive.

  (7) once who did everything turn on the printer again, and everything should work without an error.

  Note: If you get the error when the cable step 3/4 remove scanner then plug back in.

  Fixed and working again.

  This can close close...