fractions of grep is not consistent

Similar Questions

• Scrambled screen & colors is not consistent on satellite M40X-230

  Hi, I have a M40X-230, a few weeks ago, I started to see a garbled screen where colours were not consistent and the screen looked as if she was chopped vertically in 3 and all three parts were in and out of the other mixture.

  It lasted about 10-15 minutes and he persisted through reboot. However, this would not happen whenever the machine has been used. After another week or so when the machine is started, even the Toshiba splash screen is cut as described above, this continues when the config in the BIOS (press F12 at startup).

  The machine is able to boot in safe mode, but the same problem occurs and when an external monitor is attached the problem is visible on the attached screen as well.

  Anyone seen this before? All the tips, I think it's my graphics card or perhaps the LCD, but really not sure.

  salleyne

  Hi mate,

  This sounds like a hardware malfunction cleary. If you already have the symptoms to the toshiba logo, then I would recommend you to contact emergency an ASP for a checkup of material because this error cannot be resolved with an update of the bios/software.

  Visit this link for the nearest availabel ASP in your country:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

  Good luck and good weekend

• How do I register a very old acrobat from adobe and then download the upgrade? It seems that the serial number is not consistent with the serial number required by the adobe Web site. My serial number starts with the letter instead numbers.

  How do I register a very old acrobat from adobe and then download the upgrade? It seems that the serial number is not consistent with the serial number required by the adobe Web site. My serial number starts with the letter instead numbers.

  Please see:

  Redeem your student and teacher edition purchase, convert a redemption code to a number of series and much more .

  I hope this helps.

  Concerning

  Megha Rawat

• Affinity - cluster rules is not consistent, but not enabled

  When you view the cluster tab, it says a rule of affinity is NOT consistent, but he was not active anyway, so is it to show in red as a warning seems incorrect.

  I don't know what would be the solution, because it is true that it is not consistent. It is only fair, I worry in this regard that the rule is not enabled.

  With the help of 4.1.9.

  Good good script. Love that is work.

  The API documentation, it seems that this property is not currently used today - http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/vim.cluster.RuleInfo.html

  Because the property is a Boolean value and provided by the system, I print only what it provides. I think that this was asked awhile back and it can be ignored for now until VMware appealed to the property.

• Writing batch files is not consistent.

  Hello
  
  Could you explain why file written behaving like this batch:
  
  http://lksoablogs.blogspot.com/2012/01/file-write-in-batches-is-not-consistent.html
  
  Thank you.

  It's super easy to explain...

  the inbound adapter reads two lines and sends a message that contains these two lines...
  the outgoing adapter expects two messages to write to a file... so 2 messages * 2 lines per message? 4 lines...

  e round is played.

• My Variable is not consistent when called outside the Group

  Dear all,
  
  
  I stored a variable that was within the group as follows:
  <? for-each-group: MarketingFundTransferOut; / FromFundId? >
  <? sorting: current-group () / FromFundId; ' ascending '; data-type = "text"? >
  <? sum (ATTRIB_01 [.! = "])? >
  <? xdoxslt:set_variable ($_XDOCTX, 'INIT3', xdoxslt:to_number (sum (ATTRIB_01 [.! = "])))? >-> store for the variable INIT3
  <? end for each group -? >
  
  
  and he asked outside the group with these:
  
  <? xdoxslt:to_number(xdoxslt:get_variable($_XDOCTX,'INIT3'))? >
  
  
  Sometimes the true result and sometimes the wrong result (non-compliant)
  
  Here is the example of one is not consistent:
  
  1.2 regular TV
  In Total total
  10 0 10 (I've posted the out) 10 (I've posted the in)
  
  Does anyone have an idea to solve this problem? It will be highly appreciated
  
  
  Best regards
  TSE

  You can initialize this variable before this group, so that it does not have the previous value of groups

• Problem of time zone: time zone is not consistent

  Problem of time zone: time zone is not consistent
  From sqlplus, the time is displayed:

  SQL> SELECT SYSDATE FROM DUAL;
  
  SYSDATE
  --------
  09-11-11

  from the Windows command line tool:

  D:\coherence\lib>DATE
  The current date is: 11/11/2009
  Enter the new date: (dd-mm-yy)

  But from the Control Panel, it shows at the present time is 10:40.
  For this reason, a database of programs don normally work.

  There are two ways that you could do.
  Track 1:
  Search for a file by the name "glogin.sql" on your client workstation and add the following statement

  alter session set nls_date_format = 'YYYY-MM-DD HH24:MI:SS';
  

  Make sure that you save the file. This change will apply to all users who will connect to the database using SQL * PLUS to your machine.

  Track 2:
  Create a shortcut and place it somewhere (for example on the "DESKTOP").
  Right-click on the shortcut and choose Properties.
  The text corresponding to the box 'Start' to reflect the current location of the shortcut.
  Create a file by the name "login.sql" and place it in the same folder that the shortcut.
  Edit the file and add the following line.

  alter session set nls_date_format = 'YYYY-MM-DD HH24:MI:SS';
  

  Make sure that you save the file.
  When you double-click the shortcut to launch SQL * more and opening of the session, the "login.sql" script is executed.

• X 360 spectrum (4110dx): reverse the scrolling is not consistent throughout the BONE

  I just got my X 360 spectrum and I have two reverse scrolling issues:

  1 scrolling on the Touchpad does not always work. I found the option to turn it off (when I slide down, I want the screen to do the same thing), but it works only in some applications, like Google Chrome, but not in the settings or Windows store. Is it possible to get this to be consistent in all of everything?

  2. in addition, it resets after that I restarted my computer. My choice can be set to a default value?

  Thanks for any help.

  Hello

  Try the following.

  First, download the installer of the Synaptics driver from the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72501-73000/sp72919.exe

  Then, open windows control panel, open programs and features, right click on the entry "Synaptics Pointing Device Driver" and choose uninstall.

  When this has completed, restart the laptop.

  When windows has completely recharged, open your download folder, click with the right button on the setup of Synaptics and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  When windows has reloaded, hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Model GREP does not not in JavaScript

  The model following "\r+\Z" works to find InDesigns GREP and replace to replace the empty paragraphs at the end of a story, however, it doesn't seem to work in the script environment.

  Why not the following work:

  app.findGrepPreferences = NothingEnum.nothing;
  app.changeGrepPreferences = NothingEnum.nothing;
  
  app.findGrepPreferences.findWhat = '\r+\Z';
  
  app.activeDocument.selection[0].changeGrep();
  

  \\r+\\Z

• GREP does not not in the first word of a paragraph. What's wrong?

  I'm having a small problem using GREP in a paragraph style. It does not apply the requested character style if the word is in the first paragraph. This is the condition:

  ( ? i) Data: | Description: | Hora. Monday: | Information: | Local: | No site. Object. OBS.: | Telefone. Type:

  
  

  Nobody knows why, in what's happening?

  Maybe every other word that data must leave a space in front of her to match.

• Notification e-mail is not consistent

  Hello

  I use Apple Watch 2

  I have a facility for review of mail to 'mirror' of my iPhone.

  In most cases I had warned when new email arrives, but sometimes I only have it on the phone.

  Does anyone know of other similar inconsistency?

  Thank you

  Hello

  How notifications behave depends on the State of your devices and your settings. With wrist detection enabled, in order to get notifications to your attention as soon as possible:

  • If your iPhone is unlocked, you will receive notifications on your iPhone instead of on your watch.
  • If your iPhone is locked or mode and your watch is unlocked (regardless of the question of whether the screen saver is awake or asleep) and on your wrist, you will receive notifications on your watch.
  • If your watch is locked or allowed to do not disturb, notifications will be sent to your iPhone.

  More information:

  Notifications on your Apple Watch - Apple Support

• V13 Firefox is not consistent with the WC3 CSS columns

  I use to be able to see multiple columns in v12 but is no longer in v13. Chrome and Opera display several columns but not FF v13.

  Hello, the Date of issue for firefox 13 only could say that the support for the fill column property has been added - you give a link to a page where the problems occur?

  Edit: apparently there is a problem with the height of a block of several column property. that will be solved by a release of the correction of a bug in firefox 13, which will be deployed in the coming days.

• Availability of storage is not consistent

  Hi guys

  How are the two estimates of my availability to different storage? Or is it just the blue bar on the right shows an incorrect estimate?

  Thank you

  

  You talk about the difference between 249,78 and 251 GB?

  You realize that's a difference of 1.22 GB which is less than 0.5%. The East represent the overhead on the hard drive which is probably using the disk space that is not in the view of disk space.

• recording bass and the sound is not consistent

  I pulled in a recorded drum track and then add my bass track. Good when playing and listening to headphones but when I play back the bass track is virtually all of the sounds heard. not sure on the volume level and record level as to the definition of remedy if it is part of the question

  Hi marosennc,

  I understand that you are trying to save your bass guitar on a pre-recorded drum track, and the volume is low in the final recording.   You can adjust the bass track audio before recording it.  In addition, once the title is saved, you can adjust the volume of the bass and the drummers individually track track before exporting the file to merge the two.  I would add a few sections of the GarageBand here for you User Guide.

  Record sound from a microphone or an electric instrument

  Racing volume levels

  You can set the volume level of each track, to balance the relative volume of the tracks in your project.

  Adjust the level of the volume of the track

  • In the header of the track, drag the Volume left or right to decrease or increase the volume level.

    

    Note: You may need to resize the track header to see the Volume slider.

  • Option + click on the slider to return to a neutral level (0 dB gain).

  The level indicator in the track Volume slider shows the output volume of the track during playback of the project. You can watch the level indicator when you save to the track to see if clipping occurs on the track.

  Save more Audio takes

  What did the mix?

  When you mix a project, balance you the different parts and mix them in a coherent whole. You can also add effects to the tracks - including the main runway - to change their sound and use automation to create dynamic changes in your project over time.

  Mix generally involves the following steps:

  • Racing volume levels to balance different instruments so nothing is hidden and most important parts stand out in the mix.

  Export songs on the disc

  Take care

• Keithley 6485 error 800, "not consistent with active storage."

  Hello

  I use a Keithley 6485 to acquire a buffer of 40 measures, triggered via triggerlink.

  The VI works well, but of course, what happens if no trigger is to send to the device?

  So, after a timeout, the unit is configured again (reset and configuration commands).

  This is then the error produced responses from the instrument: '800, 'noncompliant with active storage' '.

   

  The source is that there is always an active storage (visible on the screen) and I try to reconfigure the buffer.

  Here: http://torque.oncloud8.com/archives/cat_keithley_6430.html

  I found a way to leave the mode of storage of the façade:

  When debugging of labview for the 6430 programs, you could get stuck with a "noncompliant with active storage" error This occurs when the aircraft is expected store data, but you try to give orders that change, for example, the size of the buffer. I have to admit, when I first stumbled across this, I am frustrated and rebooted the machine. The "Asterix" in the upper right corner indicates use it is in storage mode, where the error. Out of this, you must not turn off the machine. Simply tap LOCAL (to get out of the remote control) and then the STORE and then LEAVE. Phew.

  Can someone help me on how to do that through SCPI commands?

  I've tried Keithley support of the Netherlands, but they don't have an idea.

  THX,

  Ben Engelen

  Support of the keithley guys gave me a work around the problem: use the controls of the SCPI to push buttons.

  so before you send the reset command is send to the following:

  YST:KEY 28;     -store the button
  YST:KEY 32;     -exit button

  : * RST;                  -reset