Frame image error

Similar Questions

• IMAQ Cast Image error

  Hi guys!

  So I installed a program using a camera and an analysis of the image. It works fine on another computer, but during the installation of this second system, I get:

  

  The research I found: http://forums.ni.com/t5/LabVIEW/imaq-cast-image-error/m-p/3217035/highlight/true#M934230

  This suggests that it is a matter of licensing. However, I have activated the license on this computer.

  What should do?

  /Y

  Thus, it is fixed.

  It seems that I needed two NI Vision Acquisition Module AND NI Vision Development software and then enable them both to get the program running.

  Both can be installed under license with the license of the develop module.

  /Y

• You can programmatically change a border/frame image control

  In a neutral way of the platform programmatically change a border/frame image control

  
  

• Image errors bad C:\progra~1\wia6eb~1\datamngr\datamngr.dll isn't is either not designed to run on Windows or it contains an error.

  Image errors bad C:\progra~1\wia6eb~1\datamngr\datamngr.dll isn't is either not designed to run on Windows or it contains an error. Etc.  Error messages starts to appear during startup and continues after desktop is visible.  It also happens when I try to open other things on the computer.  I ran malwarebytes, it found nothing.  I ran a registry cleaner, it did not help.  Operating system is Windows 7 and I use an Acer Netbook with no cd/dvd drive can not use a disk to reinstall.  How can I fix anything which causes these error messages?  Please notify.

  Get ccleaner run and then go to tools / boot. If it appears here delete the entry

• Get 'bad image' errors at startup on XP

  You don't know if it's OK jst the chip but discovers this channel via Google after trying two registry fix downloads that were purchased.  Problem - suddenly 2 days ago I found that I couldn't get into XP without having to cancel about 15 messages in 'Bad Image'.  As noted that not a single program at fault, I would be grateful for any advice on how to fix the problem please.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/Windows-XP-bad-image-start-up-message/54e44de9-ea47-4489-AC15-243a66eedb2a

  Halima, thank you very much.  While waiting for a response, I noticed that I had a common feature of many messages 'bad image' to cancel on each startup was "Bearshare" in the description of the DLL, so I re-installed the program again and then typed "problems of Bearshare bad Image" in google, which led me to this site - http://www.geekstogo.com/forum/topic/294780-bad-image-errors/

  where I downloaded their "Revo Uninstaller" which allowed me to perform a deep unistall of Bearshare.  After reboot, I haven't lived any other message 'Bad Image'.  I hope that it will still be the case, but I'll keep your advice in case I need to try something else.  Thanks again.

  Geoff

• Bad image error

  I am constantly bad image errors as soon as I turn on my computer until I turn it off. It displays in the form: Windows\system32\AVGRSSTX. DLL. I don't know how to stop or fix this problem.

  It is a problem with AVG http://forums.avg.com/ww-en/avg-free-forum?sec=thread&act=show&id=119251&type=0

  My recommendation is that you uninstall AVG using the appropriatehttp://www.avg.com/gb-en/download-tools removal tool

  You can then reinstall AVG or other program antivirus.

• I just downloaded updates for 2014 PS on mac OS 10.7.5. Now, he opens all the images - error message cannot open because the open parts are incorrect?

  I just downloaded updates for 2014 PS on mac OS 10.7.5. Now, he opens all the images - error message cannot open because the open parts are incorrect?

  Hi Akash.

  Download Installer Camera Raw and it seems to have solved the problem.

  Thanks for your time.

  Concerning

  Peter DeBeer

• "Insufficient for an image" error after upgrade to 10.1.4 or 9.5.2

  Greetings,

  We continue to receive the following error message: "Insufficient for an image" error after upgrade to 10.1.4 or 9.5.2 and we want a quickfix (as it appears in: fter-updating-to-10-1-4-or-9-5-2/ https://blogs.adobe.com/dmcmahon/2012/08/21/acrobat-insufficient-data-for-an-image-error-a). Our company uses scanning software, and we must be able to immediately view the PDF files, retirement is not an option that we would need to do it on all computers. It is urgent for us to have this fixed number, a quickfix (as shown previously) would be ideal, because we cannot wait for the next update to Acrobat. This question as been around for several weeks now.

  Thank you very much for your time and help.

  Acrobat engineering wishes to inform users facing this problem that the latest version of the player (available for download on http://get.adobe.com/reader) XI solves this problem. Users are advised to download the latest version as soon as possible to avoid encountering this error in the future. As mentioned, the team is working hard to solve the problem in earlier versions (10.x and 9.x) as well and plans to deliver a solution by Q1 2013. For more details, you can check out the blog here

• Satellite L500 - Create System Image - errors on the media

  The Satellite L500 series, I tried 3 times to create an image of C: System with the help of Windows 7, but each time on checking image files created, I got the message "backup Windows found errors on the media while saving a top backup & can not be used for additional backups.

  I tried in Windows to restore from this DVD, but he acknowledged even the backup DVD Win.

  Discs used: Sony DVD - R 16 x, & twice on DVD + RW (4 x), used straight out of the box (no formatting by me).

  Any ideas what I am doing wrong, or if b some into conflict with programs that I use?

  In my opinion, this question is for Microsoft. As far as I know it is the functionality of Windows and the laptop manufacturer has not much to do with it.
  Can you create upward on the second partition of HARD drive or even on external HARD drive?

• IMAQ: 'not an image' errors using the IMAQdx snap

  Hello world

  I have a strange error that I do not understand. The part of the VI is fixed.

  Basically, I take some pictures (10 to 20 years) of a region of interest and their average in one, I want to save and post processing. In particular, I want to get the value of each pixel gray scale.

  The problem is that the result is not 'a picture '. I can view, but not to save it to disk, or perform a filtering or even (like the edge detection). I add a 'cast image' module to try to force it, but it is not good.

  I am quite new to Labview, so I assume that the error is obvious, but I can't find it! I compared my VI with existing, without success.

  In addition, my method to establish the average return on investment can be improved, do not hesitate to propose more efficient designs.

  Thanks in advance for your help,

  
  

• IMAQ Vision: Is not an Image error when using producer/consumer

  Hi any person

  I used the Vision Express to solve the problem of Patern Machine.

  I want to put Assistant and Aquistion in 2 loop parallel. So I used the producer/consumer to transfer data

  After running VI, I pressed the Stop button and I encountered this error

  I think that getting the queue has a problem. I changed Image to Contant control and connect it to the data type of element. I think that this path is correct.

  So, in case of error, it addressed to Coppy IMAQ in Assistant. So I think that I used the Comunication of the queue is not correct.

  How can I solve this problem

  Thank you

  

  You can see more detail in the following video: https://www.youtube.com/watch?v=i6FOQ2jypXc&feature=youtu.be

  Try this:

  

  You should put the image process in the loop of the consumer and release it properly.

• generation of a dll with image error

  I work with Labview 2009 and the vision module. Please find attached a project that has a DLL function. The function just to get the image and return it back without doing anything. Compilation fails, giving messages that are not relevant. Could someone advice? Concerning

  Hi gabi_hor,

  If you expand the error message, you will notice that it says that the manufacturer of the DLL is not properly registered and tells you to execute a certain file lvdb.exe. That run and rerun your build. This time, it will probably be faily with error '-2147221480 '. It is a known issue with LabVIEW 2009. It is listed in the known issues Page.

  Workaround: 1. open C:\Program NIUninstaller Instruments\LabVIEW 2009\cintools\fundtypes.h in a text editor.
  2. find the line that says #include .
  3. top of the line, add the following lines:
  #ifdef _CVI_
  #include
  #endif / * _CVI_ * /.
  4. save the file.
  5. repeat the build.

  These two things should build your DLL.

• Bad Image error - igdumdim32.dll

  Igdumdim32.dll somehow got on my Windows 7 system. From what I can find, it is a dll for Windows 8. Get the error message: "C:\windows\system32\igdumdim32.dll is not designed to run on Windows or it contains an error...". "Very irritating and does not disrupt some features. What should I do?

  Let me describe the problem as completely as possible.

  Reads the 'error' message: "C:\Windows\system32\igdumdim32.dll is not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator... »

  The "error" message occurs repeatedly. It occurs when I try to open a video on Foxfire. It's entitled"FlashPlayerPlugin_15_0_0_223.exe - Bad Image. "When I click OK, the message reappears. It appears 3 times in total and after I clicked OK whenever the video runs correctly, but it won't go full screen. This does not happen with Internet Explorer. The same message occurs when opening certain programs such as: Quicken (titled qw.exe - bad Image), QuickTime Player (titled QuickTimePlayer.exe - bad Image), Garmin Express (titled Express.exe - bad image) and others. In all cases the message come up 3 times and once I clicked OK for everything the program runs normally.

  I tried to find igdumdim32 in windows\system32, but he's not here. There's an igdumdim64 it. However, I found in C:\Windows\System32\DriverStore\FileRepository\5.inf_a...etc. It is also in C:\Windows\SysWOW64.

  Just in case someone else looking at this, I finally corrected this problem.  If you're reading this, it probably means that you have the same problem.  There are dozens of this error of 'Bad Image' messages in this forum and in the Microsoft forum.

  I think that 'Image' is the idea here, but it took me a long time to understand that.

  By a very winding road, I finished on the Intel support site (a friend suggested this).  Here, you can download a utility to update the drive, I did.  When he was executed, he informed me that he thought that I have a graphics driver of custom provider and (thank you), I would be cautious about downloading a new driver on their part.  That is why I did not.  However, that me indicated that there could be a graphic driver problem.

  Then I remembered that during my many and varied travels through the internet read something on a "Recovery Manager" that HP installs in the product (once again, thank you very much).  HP customer care has to a set of instructions on how to use the tool on their website: (using Recovery Manager to restore the software and drivers (Windows 7).

  I ran the Manager and I replaced the drive of Intel graphics.  Problem solved.

  I hope this can be useful to others.

• the bad image error

  Hello everyone, I wrote an iso file to a dvd + r disc, but I can't run it. I got an error: the application or dll \sources \spwizeng.dll D: is not valid windows image. Please check this against your installation diskette.

  I tried to delete the file spwizeng.dll but I don't know how to cancel registration is in the drive. What other ways to solve this problem?

  First of all, you won't tell us anything on your system or you are trying to do.

  As you send your message in the Windows XP forums, it must have something to do with Windows XP, right?

  Second of all, if you have something to a burned CD/DVD you can't delete files from a CD/DVD.

  Thirdly, the spwizeng.dll is not a registrable DLL.  Just because a file has an extension DLL does not mean it can be or must be registered.

  Fourth, if you perform a Google search on your message, you will find a lot of related topics on the Internet about similar messages and they seem to relate to any attempt to install Windows 7/8 of an ISO file downloaded which might be corrupted - that's what you try to do?

  You can browse through some of the Google search results and see if they are useful. Some people have been able to understand, and the topics of discussions are quite ridiculous.

  Click on the following link to begin:

  http://bit.LY/1wDe6WR

• System32\secuload is not a valid Windows image error message.

  Whenever I start my PC, I get the following error message. "The request on the DLL C:\\WINDOWS\system32\secuload.dll is not a valid Windows image.  Please check this against your installation diskette. "I usually get 20 or if these and I have to click OK to allow the program to move forward.  No idea how to solve this problem?

  Hello

  ·        When I get this error message every time that you open any program or randomly?

  secuload.dll is a charger of security belonging to Tenebril Security Loader of Tenebril Inc. non-system processes like secuload.dll are created from the software you have installed on your system.

  Method 1:

  If the program loads at startup and then, I suggest you to disable this program from loading during startup. Follow the steps mentioned below.

  ·        Click Start and click Run.

  ·        Type msconfig.exe in the run box, and then press ENTER.

  ·        Click the Startup tab and look for the program.

  ·        Uncheck the box located next to this program and click apply and then click Ok.

  ·        Now, restart the system and check if the problem persists.

  Method 2:

  It is perhaps the application is corrupted. I suggest to uninstall the program and then install it on the system and check if the problem is resolved.

  How to change or remove a program in Windows XP

  http://support.Microsoft.com/kb/307895

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.