IMAQ: 'not an image' errors using the IMAQdx snap

Hello world

I have a strange error that I do not understand. The part of the VI is fixed.

Basically, I take some pictures (10 to 20 years) of a region of interest and their average in one, I want to save and post processing. In particular, I want to get the value of each pixel gray scale.

The problem is that the result is not 'a picture '. I can view, but not to save it to disk, or perform a filtering or even (like the edge detection). I add a 'cast image' module to try to force it, but it is not good.

I am quite new to Labview, so I assume that the error is obvious, but I can't find it! I compared my VI with existing, without success.

In addition, my method to establish the average return on investment can be improved, do not hesitate to propose more efficient designs.

Thanks in advance for your help,


Tags: NI Hardware

Similar Questions

  • You receive the error software device driver has not been installed successfully using the USB LAN cable

    Original title: Please help!

    I bought a USB - LAN cable, but when I try to use it, this thing came out, "device driver software was not properly installed", then what should I do to use this cable properly? l

    Hello

    Thanks for posting in the Microsoft community!
    You have reached the right forum for your question. If I understand correctly, you receive error software device driver has not been installed successfully using the USB LAN cable. I suggest you follow the troubleshooting steps to check if this may help.

    1. don't you make changes on the computer before the show?
    2 are you able to get any USB devices to work in USB ports?

    Check the status of the device and the driver Version:

    a. open byclicking the button start Device Manager, click on Control Panel, clicking system and Maintenance, and thenclicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    b. double-click the category containing your device driver and thendouble - click the device name.

    c. check the status of the device tab click on driver tab arencontre, checkDriver provide, Date of the driver, the driver Version, digital signer. Please provide this information.

    d. click OK, exit Device Manager.

    Method 1:
    You can update the drivers on the manufacturer's Web site and check.

    Method 2:

    Use Windows Update to find a device driver
    Note to use Windows Update, you must be connected to the computer as an administrator:
    Follow these steps to use Windows Update to find a device driver: a.Click Start, click all programs and then click Windows Update.
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    b check the updates.
    AA,a,AB,b,c.to determine if there are updated drivers, click on view available updates.
    If updates are available, click the driver you want to install, and then click on install.
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

    If you need further assistance, please answer and we will be happy to help you.

  • Hi I have an error code 205 downloading cloud adobe creative that I use proxy in my company, but do not see this error in the public internet, this problem can I solve this problem

    Hi I have an error code 205 downloading cloud adobe creative that I use proxy in my company, but do not see this error in the public internet, this problem can I solve this problem

    In proxy environment, the computer cannot connect to the Adobe servers, so it does not work. The proxy or the firewall should be disabled if you use creative cloud.

    Hope this will help you.

    Kind regards

    Hervé Khare

  • My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

    My computer will not be stopped by using the "turn off computer' under 'Start' (lower left corner)

    Hi Harry,.

    · What happens when you try to stop?

    · You receive an error message or error code?

    · Do you remember all the recent changes on the computer before the show?

    · What is the service pack installed?

    You can check the link below: Windows XP Shut Down and auto-restart issues: http://www.microsoft.com/windowsxp/using/helpandsupport/learnmore/russel_02may13.mspx

    Advanced Troubleshooting for shutdown problems in Windows XP: http://support.microsoft.com/kb/308029

  • Foreground color does not change when I use the color picker.  CS6.

    Foreground color does not change when I use the color picker.  CS6.

    Your document is in grayscale, convert color (Image > Mode).

  • Application is not able to connect using the Oracle SCAN chain

    Dear Oracle gurus

    We have 11g r2 11.2.0.3.0 2 cluster nodes

    We have configured the scanning using scan-vip single using/etc/hosts file resolution

    Our app to work correctly using the string of double local Vip (10g method)

    Scan works very well in the database server when we check using sqlplus

    Works very well in the database server Oracle SCAN

    Sqlplus DB - 1 test bench / testbed@my-db-scan:1521 / orcl

    When we use it below URL JDBC in Tomcat Version-6 then "doesn't allow not to connect even if there will connect a while but connectivity isn't stable when we reboot the tomcat"

    Hibernate.Connection.URL=jdbc:Oracle:Thin:@My-DB-Scan:1521/ORCL

    Application is not able to connect using the Oracle SCAN chain

    [May 13, 2013 12:48:24] [INFO] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: init() Called.
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: adding the data manager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 1: com.cmp.mysm.hibernate.core.system.staff.HStaffDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 2: com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 3: com.cmp.mysm.hibernate.core.system.profilemanagement.HProfileDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 4: com.cmp.mysm.hibernate.core.system.accessgroup.HAccessGroupDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 5: com.cmp.mysm.hibernate.systemaudit.HSystemAuditDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 6: com.cmp.mysm.hibernate.datasource.database.HDatabaseDSDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 7: com.cmp.mysm.hibernate.datasource.ldap.HLDAPDatasourceDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 8: com.cmp.mysm.hibernate.sessionmanager.HSessionManagerDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 9: com.cmp.mysm.hibernate.sessionmanager.HASMDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 10: com.cmp.mysm.hibernate.digestconf.HDigestConfDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 11: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 12: com.cmp.mysm.hibernate.externalsystem.HExternalSystemInterfaceDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 13: com.cmp.mysm.hibernate.servermgr.drivers.HDriverDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 14: com.cmp.mysm.hibernate.servermgr.drivers.subscriberprofile.database.HDatabaseSubscriberProfileDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 15: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 16: com.cmp.mysm.hibernate.servicepolicy.auth.HAuthServicePoilcyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 17: com.cmp.mysm.hibernate.servicepolicy.acct.HAcctServicePoilcyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 18: com.cmp.mysm.hibernate.servicepolicy.dynauth.HDynAuthServicePoilcyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 19: com.cmp.mysm.hibernate.servermgr.server.HServerDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 20: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 21: com.cmp.mysm.hibernate.servermgr.plugin.HPluginDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 22: com.cmp.mysm.hibernate.rm.ippool.HIPPoolDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 23: com.cmp.mysm.hibernate.servermgr.eap.HEAPConfigDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 24: com.cmp.mysm.hibernate.servermgr.alert.HAlertListenerDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 25: com.cmp.mysm.hibernate.servermgr.gracepolicy.HGracePolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 26: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 27: com.cmp.mysm.hibernate.radius.dictionary.HDictionaryDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 28: com.cmp.mysm.hibernate.radius.policies.accesspolicy.HAccessPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 29: com.cmp.mysm.hibernate.radius.policies.radiuspolicy.HRadiusPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 30: com.cmp.mysm.hibernate.radius.radtest.HRadiusTestDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 31: com.cmp.mysm.hibernate.radius.bwlist.HBWListBLManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 32: com.cmp.mysm.hibernate.rm.concurrentloginpolicy.HConcurrentLoginPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 33: com.cmp.mysm.hibernate.wsconfig.HWebServiceConfigDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 34: com.cmp.mysm.hibernate.diameter.dictionary.HDictionaryDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 35: com.cmp.mysm.hibernate.servicepolicy.diameter.naspolicy.HDiameterNASPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 36: com.cmp.mysm.hibernate.servicepolicy.diameter.creditcontrolpolicy.HCreditControlPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 37: com.cmp.mysm.hibernate.servicepolicy.diameter.eappolicy.HEAPPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 38: com.cmp.mysm.hibernate.servermgr.drivers.HDiameterDriverDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 39: com.cmp.mysm.hibernate.servermgr.transmapconf.HTranslationMappingConfDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 40: com.cmp.mysm.hibernate.diameter.diameterpolicy.HDiameterPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 41: com.cmp.mysm.hibernate.servicepolicy.rm.cgpolicy.HCGPolicyDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 42: com.cmp.mysm.hibernate.reports.userstat.HUserStatisticsDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 43: com.cmp.mysm.hibernate.diameter.routingconf.HDiameterRoutingConfDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 44: com.cmp.mysm.hibernate.diameter.diameterpeerprofile.HDiameterPeerProfileDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 45: com.cmp.mysm.hibernate.diameter.diameterpeer.HDiameterPeerDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 46: com.cmp.mysm.hibernate.core.base.HGenericDataManager
    [May 13, 2013 12:48:24] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
    [May 13, 2013 12:48:24] [INFO] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: Data Manager was initialized successfully.
    [May 13, 2013 12:48:29] [ERROR] [0.0.0.0] - unknown [CONFIG MANAGER]: error during the Configuration Manager operation, reason: failed to open the connection
    [May 13, 2013 12:48:29] [TRACE] [0.0.0.0] - unknown [CONFIG MANAGER] com.cmp.mysm.datamanager.DataManagerException: failed to open the connection
    at com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager.getList (HSystemParameterDataManager.java:45)
    at com.cmp.mysm.blmanager.core.system.systemparameter.SystemParameterBLManager.getList (SystemParameterBLManager.java:71)
    at com.cmp.mysm.web.core.system.cache.ConfigManager.init (ConfigManager.java:47)
    at com.cmp.mysm.web.core.system.servlet.myServlet.init (myServlet.java:27)
    at javax.servlet.GenericServlet.init(GenericServlet.java:212)
    at org.apache.catalina.core.StandardWrapper.loadServlet(StandardWrapper.java:1206)
    at org.apache.catalina.core.StandardWrapper.load(StandardWrapper.java:1026)
    at org.apache.catalina.core.StandardContext.loadOnStartup(StandardContext.java:4421)
    at org.apache.catalina.core.StandardContext.start(StandardContext.java:4734)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
    at org.apache.catalina.core.StandardHost.start(StandardHost.java:840)
    at org.apache.catalina.core.ContainerBase.start(ContainerBase.java:1057)
    at org.apache.catalina.core.StandardEngine.start(StandardEngine.java:463)
    at org.apache.catalina.core.StandardService.start(StandardService.java:525)
    at org.apache.catalina.core.StandardServer.start(StandardServer.java:754)
    at org.apache.catalina.startup.Catalina.start(Catalina.java:595)
    at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:289)
    at org.apache.catalina.startup.Bootstrap.main (Bootstrap.java:414)
    Caused by: org.hibernate.exception.GenericJDBCException: failed to open the connection
    at org.hibernate.exception.SQLStateConverter.handledNonSpecificException(SQLStateConverter.java:140)
    at org.hibernate.exception.SQLStateConverter.convert(SQLStateConverter.java:128)
    at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:66)
    at org.hibernate.exception.JDBCExceptionHelper.convert(JDBCExceptionHelper.java:52)
    at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:449)
    at org.hibernate.jdbc.ConnectionManager.getConnection(ConnectionManager.java:167)
    at org.hibernate.jdbc.AbstractBatcher.prepareQueryStatement(AbstractBatcher.java:161)
    at org.hibernate.loader.Loader.prepareQueryStatement(Loader.java:1596)
    at org.hibernate.loader.Loader.doQuery(Loader.java:717)
    at org.hibernate.loader.Loader.doQueryAndInitializeNonLazyCollections(Loader.java:270)
    at org.hibernate.loader.Loader.doList(Loader.java:2294)
    at org.hibernate.loader.Loader.listIgnoreQueryCache(Loader.java:2172)
    at org.hibernate.loader.Loader.list(Loader.java:2167)
    at org.hibernate.loader.criteria.CriteriaLoader.list(CriteriaLoader.java:119)
    at org.hibernate.impl.SessionImpl.list(SessionImpl.java:1706)
    at org.hibernate.impl.CriteriaImpl.list(CriteriaImpl.java:347)
    at com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager.getList (HSystemParameterDataManager.java:43)
    ... 21 more
    Caused by: java.sql.SQLException: an attempt by a client to fund a connection has expired.
    at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:106)
    at com.mchange.v2.sql.SqlUtils.toSQLException(SqlUtils.java:65)
    at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:527)
    at com.mchange.v2.c3p0.impl.AbstractPoolBackedDataSource.getConnection(AbstractPoolBackedDataSource.java:128)
    at org.hibernate.connection.C3P0ConnectionProvider.getConnection(C3P0ConnectionProvider.java:78)
    at org.hibernate.jdbc.ConnectionManager.openConnection(ConnectionManager.java:446)
    ... more than 33
    Caused by: com.mchange.v2.resourcepool.TimeoutException: a client has expired while waiting to acquire a resource of com.mchange.v2.resourcepool.BasicResourcePool@47503458--timeout to awaitAvailable()
    at com.mchange.v2.resourcepool.BasicResourcePool.awaitAvailable(BasicResourcePool.java:1317)
    at com.mchange.v2.resourcepool.BasicResourcePool.prelimCheckoutResource(BasicResourcePool.java:557)
    at com.mchange.v2.resourcepool.BasicResourcePool.checkoutResource(BasicResourcePool.java:477)
    at com.mchange.v2.c3p0.impl.C3P0PooledConnectionPool.checkoutPooledConnection(C3P0PooledConnectionPool.java:525)
    ... 36 more

    May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDescriptor
    NEWS: Deployment descriptor configuration host - manager .xml
    May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDescriptor
    NEWS: Deployment configuration descriptor manager.xml
    May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
    NEWS: Deployment of the directory docs web application
    May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Examples of Directory deployment web application
    May 13, 2013 12:48:29 AM org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploy the web application ROOT directory
    May 13, 2013 org.apache.coyote.http11.Http11Protocol start 12:48:29 AM
    INFO: From Coyote HTTP/1.1 on http-8080
    May 13, 2013 12:48:30 AM org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:8009
    May 13, 2013 12:48:30 hours departure from org.apache.jk.server.JkMain
    INFO: Jk running ID = time 0 = 0/15 config = null
    May 13, 2013 12:48:30 hours departure from org.apache.catalina.startup.Catalina
    INFO: Starting the server in 16222 ms

    Some time Tomcat to connect to the database*.
    [May 13, 2013 10:02:29] [INFO] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: init() Called.
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: adding the data manager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 1: com.cmp.mysm.hibernate.core.system.staff.HStaffDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 2: com.cmp.mysm.hibernate.core.system.systemparameter.HSystemParameterDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 3: com.cmp.mysm.hibernate.core.system.profilemanagement.HProfileDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 4: com.cmp.mysm.hibernate.core.system.accessgroup.HAccessGroupDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 5: com.cmp.mysm.hibernate.systemaudit.HSystemAuditDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 6: com.cmp.mysm.hibernate.datasource.database.HDatabaseDSDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 7: com.cmp.mysm.hibernate.datasource.ldap.HLDAPDatasourceDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 8: com.cmp.mysm.hibernate.sessionmanager.HSessionManagerDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 9: com.cmp.mysm.hibernate.sessionmanager.HASMDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 10: com.cmp.mysm.hibernate.digestconf.HDigestConfDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 11: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 12: com.cmp.mysm.hibernate.externalsystem.HExternalSystemInterfaceDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 13: com.cmp.mysm.hibernate.servermgr.drivers.HDriverDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 14: com.cmp.mysm.hibernate.servermgr.drivers.subscriberprofile.database.HDatabaseSubscriberProfileDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 15: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 16: com.cmp.mysm.hibernate.servicepolicy.auth.HAuthServicePoilcyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 17: com.cmp.mysm.hibernate.servicepolicy.acct.HAcctServicePoilcyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 18: com.cmp.mysm.hibernate.servicepolicy.dynauth.HDynAuthServicePoilcyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 19: com.cmp.mysm.hibernate.servermgr.server.HServerDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 20: com.cmp.mysm.hibernate.servermgr.service.HServiceDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 21: com.cmp.mysm.hibernate.servermgr.plugin.HPluginDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 22: com.cmp.mysm.hibernate.rm.ippool.HIPPoolDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 23: com.cmp.mysm.hibernate.servermgr.eap.HEAPConfigDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 24: com.cmp.mysm.hibernate.servermgr.alert.HAlertListenerDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 25: com.cmp.mysm.hibernate.servermgr.gracepolicy.HGracePolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 26: com.cmp.mysm.hibernate.radius.clientprofile.HClientProfileDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 27: com.cmp.mysm.hibernate.radius.dictionary.HDictionaryDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 28: com.cmp.mysm.hibernate.radius.policies.accesspolicy.HAccessPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 29: com.cmp.mysm.hibernate.radius.policies.radiuspolicy.HRadiusPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 30: com.cmp.mysm.hibernate.radius.radtest.HRadiusTestDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 31: com.cmp.mysm.hibernate.radius.bwlist.HBWListBLManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 32: com.cmp.mysm.hibernate.rm.concurrentloginpolicy.HConcurrentLoginPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 33: com.cmp.mysm.hibernate.wsconfig.HWebServiceConfigDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 34: com.cmp.mysm.hibernate.diameter.dictionary.HDictionaryDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 35: com.cmp.mysm.hibernate.servicepolicy.diameter.naspolicy.HDiameterNASPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 36: com.cmp.mysm.hibernate.servicepolicy.diameter.creditcontrolpolicy.HCreditControlPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 37: com.cmp.mysm.hibernate.servicepolicy.diameter.eappolicy.HEAPPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - [DATA MANAGER FACTORY] unknown: 38: com.cmp.mysm.hibernate.servermgr.drivers.HDiameterDriverDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 39: com.cmp.mysm.hibernate.servermgr.transmapconf.HTranslationMappingConfDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 40: com.cmp.mysm.hibernate.diameter.diameterpolicy.HDiameterPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 41: com.cmp.mysm.hibernate.servicepolicy.rm.cgpolicy.HCGPolicyDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 42: com.cmp.mysm.hibernate.reports.userstat.HUserStatisticsDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 43: com.cmp.mysm.hibernate.diameter.routingconf.HDiameterRoutingConfDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 44: com.cmp.mysm.hibernate.diameter.diameterpeerprofile.HDiameterPeerProfileDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 45: com.cmp.mysm.hibernate.diameter.diameterpeer.HDiameterPeerDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: 46: com.cmp.mysm.hibernate.core.base.HGenericDataManager
    [May 13, 2013 10:02:29] [DEBUG] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: *.
    [May 13, 2013 10:02:29] [INFO] [0.0.0.0] - unknown [DATA MANAGER FACTORY]: Data Manager was initialized successfully.
    In data manager: 1
    In data manager: 2
    In data manager: 19
    In data manager: 20
    In data manager: 21
    In data manager: 22
    In data manager: 23
    In data manager: 24
    In data manager: 3
    In data manager: 4
    May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDescriptor
    NEWS: Deployment configuration descriptor manager.xml
    May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDescriptor
    NEWS: Deployment descriptor configuration host - manager .xml
    May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
    NEWS: Deployment of the directory docs web application
    May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Deploy the web application ROOT directory
    May 13, 2013 10:02:30 org.apache.catalina.startup.HostConfig deployDirectory
    INFO: Examples of Directory deployment web application
    10:02:30 org.apache.coyote.http11.Http11Protocol start may 13, 2013
    INFO: From Coyote HTTP/1.1 on http-8080
    May 13, 2013 10:02:30 org.apache.jk.common.ChannelSocket init
    INFO: JK: ajp13 listening on /0.0.0.0:8009
    Org.apache.jk.server.JkMain 10:02:30 starting May 13, 2013
    INFO: Jk running ID = time 0 = 0/14 config = null
    Org.apache.catalina.startup.Catalina 10:02:30 starting May 13, 2013
    INFO: 6176 SP server startup


    But even once, when we try to stop and start then same problem occurred that we are not able to connect to the database

    Thanks in advanace

    We had solved the problem of our self
    to disable the setting of listener_network

    We also increase the connection timeout on the demand side

  • SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

    SpeedGrade CC14 does not open when you use the "Direct Link to Adobe SpeedGrade... "of PremierePro CC14.

    I can open the SG of start menu/desktop computer and I can open the PP project in SG very well. The PP project contains 3 deadlines and I take one I want without any problem. Returning to the SG PP works fine as well. It seems only thing doesn't work does not automatically open the PP file and selecting the correct timeline in the Official Journal of the project.

    I had a glance at the "C:\Users\john Bishop images\AppData\Roaming\Adobe\SpeedGrade\8.0\logs\SpeedGrade.log ' but it is not updated when I try to use the link Direct from PP. command It updated when I invoke the start menu/desktop computer SG. Note that none of the other newspaper, the files are updated either (Plugin Loading.log, Database.txt Trace and Debug Database.txt). All these get updated when I run the desktop/start. It would appear that SG is not yet known.

    I uninstalled the SG and the PP and re-installed (all in the directories by default) and everything seemed to go OK but no change.

    I also added 2 political profile the NVIDIA Control Panel, just display a message when loading SpeedGrade.exe and another for a slightly different message when loading SpeedGradeCmd.exe. SG invoking the desktop/start causes the SpeedGrade.exe message to display. Using the 'Direct link' PP file option does not display anything, reinforcing my thought that SG is just never called from PP.

    SP1 Windows 7 Professional 64 bit

    12 GB OF RAM

    2-Intel Xeon E5640 (16 sons) processors

    NVIDIA GeForce GTX580 1536 MB memory graphics

    PS... I used the Adobe cleaning tool noted elsewhere and tried NVIDIA workarounds as well - all to nothing does not.

    Problem solved!

    My Antivirus software was in the way. Once I have updated, things work fine.

    Thanks for your help!

  • Could not find ' subject: accidents using the address bar

    My question is with Firefox (35.0.1) constantly crashing, I try to find my submitted incident reports but could not find ' subject: accidents using the address as directed by Mozilla bar. I type "subject: accidents and end up with 'the address is not valid'." My browser crashed between 25 to 30 times in the last 6 days, I presented reports every time and 6 times, I also introduced my address to receive a response, none was forthcoming.
    Home PC is used by a few of us, while the children use their own laptop computer, to save time logging in and out, each of us using another browser. Nobody in our family has problems with IE or Chrome on the PC at home, nor children. The only person to have problems is the poor SAP who drew the short straw - me.

    I can a fair bit of advice? During my research, these constant crashes, I see that many, many others have had the same problem and for quite a few years apparently. Should I just accept that this is part of the use of Firefox and don't forget to take some Valium drops in my tea before logon? or perhaps the healthier choice, find a.n.other browser and move everything out there?
    I wonder Auto Add info and willingness, but understand that I do not use the Firefox browser to do this now because he planted just - seriously.

    Hello type about: crashes without an empty space (on: crashes)

    Thank you

  • I'm not clear how to use the recovery CD

    I added all the space using my HDD is it comes about 12 GB, I have 27.9 GB of disk space, but my drive has only 1.80 left disk space. I made clear to solve this problem. Basket is empty, I ran disk cleanup.

    A computer expert suggested that Windows might have become confused and cannot recognize what place I save, it might be because I ran a program called Cyberscrub often. His solution is to reload Windows XP home. My laptop came with recovery discs, everything else is already loaded. I have so much I don't want to lose on my laptop. If I use the recovery discs, I will lose everything on my computer, am I better off buying Windows XP home and re-load, in which case I will not lose my job?

    Also I am not clear how to use the recovery discs, I can't find instructions on what you are doing.
    The only person who could help me went to travel and not reachable.
    Any help greatly appreciated
    Lorraine Hart

    It of a very simple to recover the laptop.
    Just boot from the recovery CD and follow the instructions on-screen ;)

    I put t know what version recovery CD you have, but the older one provides the standard and expert mode. In expert mode, you can choose you partition where the OS is to be installed.
    So in this case only the selected partition will be formatted!

    But have you checked the size of the HARD disk in disk management?
    Simply click on the my icon my computer and choose manage.

    Of course, you could remove the internal HARD disk and it could connect to the external USB HDD controller. Then, connect the drive HARD to the second PC and you record data on another HARD drive.

  • My cursor does not work in Blogger using the Safari browser.

    My cursor does not work in Blogger using the Safari browser. I am able to type, but the cursor seems to disappear when I'm in blogger.  It is difficult to navigate if you do not see where is the curse. I used all the other browsers, and this does not happen with them.  In the Blogger help forum other people experiencing the same thing.  He has been as well as a few weeks and I can not say definitively if it coincides with the updates to the OS. Any help would be appreciated.

    I have the same question too! Is there any ideas on how to solve this problem? So frustrating when you can't even say where you are on the page

  • Acer toggle display does not display when you use the Fn + F5 key secret on my Acer Aspire 5560

    What it does:

    When you use the Fn + F5 key combination on my Acer Aspire 5560, it brings up a screen changes on the laptop screen for the selection of an external monitor, I am currently using Windows 7 Ulitmate

    Before the problem:

    Display mode switch Acer existed prior to the upgrades of the drivers

    The problem:

    The toggle screen Acer does not display when you use the Fn + F5 key secret on my Acer Aspire 5560?

    Additon Information needed to solve the problem or any other information:

    I would like to know what driver or software operates the Acer toggle display Mode?

    Also where can I find this driver for computer: Acer Aspire 5560 to bring this Acer toggle display Mode function?

    Acer Toggle display Mode: this is a picture of it when you use the Fn + F5 combination:

    Thank you very much Ironfly Ace, it has worked Acer hero of the day

  • "The network adapter is not correctly configured to use the ip Protocol" problem on Vista

    Hello. My PC has recently came across this problem "the network adapter is not correctly configured to use the ip Protocol", every time I click on diagnose & repair. I don't know how to fix it. Please help, thanks in advance. Magic

    Hello X-x_MaGiC_x-X,

    Thank you for visiting the website of Microsoft Windows Vista Community.

    Try the rest of the stage in this article:

    System restore points are created automatically when the following occur:

    • When you install a new application or driver.
    • When you uninstall or install some programs.
    • When you install new updates
    • Automatically on a daily interval
    • Manually by creating a.
    • If you choose to use system restore to restore to a previous restore point, System Restore creates a new restore point before you restore a previous state in case something goes wrong. If you are restoring to a previous state in Mode without failure, a restore point will create for the current state.

    So that the restoration of the system to work, you must have 300 MB of free space for each hard disk that monitors the system restore. System Restore will also use up to 15% of disk space on each disk that it monitors. That hard disk space runs out, older restore points will be deleted as newer ones. It is also important to note that you must be logged in as an administrator in order to use the system restore. Now that you understand the basics of the system restore, you must continue to the next section to learn how to use it.

    Restore Windows Vista to a previous state

    In the case of a problem on your computer that cannot be solved by normal means, you can restore your computer to a previous working state. To do this, you need to start restoring the system so that you can choose the restore point to restore. If you currently have Windows Vista boot problems, you can use the system restore in Windows recovery environment. Instructions on how to do it in this tutorial can be found: System Restore using the Windows Vista recovery environment.

    If you can connect to Windows Vista, you must follow these steps.

    1. Close and save any documents that you have opened.
    2. Click the Start button to open your Start Menu. The Start button looks like this:
    3. When the Start Menu open click on the menu option all programs.
    4. Click once on the Start Menu Accessories group.
    5. Click once on the System Tools Start Menu group.
    6. Click once on the icon of the system restore. After you click the icon, if a user account control window opens, click on the button continue.

    You will now be on the screen as shown below in Figure 1 system restore. From this screen, you can specify the restore point that you want to restore.

    1 screen of system restore

    By default, Vista will be already selected the restore recommended option. This restore point is one followed a new pilot program, or update has been installed. If you do not want to use this restore point, you can click on the button next to start the restore process. On the other hand, if there is a more recent restore point that you want to restore you should select choose a different restore point and press the next button. This will bring you to a screen, as shown in Figure 2, which contains a list of all available restore points that you can restore.

    2. the list of available restore points

    You must select the restore point that you want to restore, and then press the button next to start the restore process. Vista will display a window showing your selected restore point and asking you to confirm that it is that you want to restore.

    3. confirm the selected restore point

    If you want to select a different restore point, press the Back button. Otherwise, you can press the Cancel button to exit the system restore or the button finish to begin the restore process. If you have selected finish, Vista will display a second prompt asking you to confirm that you want to continue restoring.

    4. second Confirmation

    If you are sure you want to restore, then press the Yes button. Vista will now log you off the computer and start the system restore process, as shown in Figure 5 below.

    5. restoration of a restore point

    When the restore is complete, your computer will be restarted and when Vista starts it backup will be restored to its previous state. When you open a Vista session for the first time after the restore, you will see a message indicating that the restore was successful.

    6. system restore was successful

    If there are problems with your computer because the last restoration, you can return to your previous settings to ebb in the system restore utility and select Undo system restore by pressing the next button.

    7 undo the last system restore

    Your computer should now work correctly again.

    With the help of the restoration of the system in the Windows recovery environment

    Manual creation of Restore Points

    As mentioned previously, it is also possible to create manual restore depending on points. Some popular designs to create manual restore points are when you have your computer configured perfectly and I would save the State in case of problems in the future. To create a manual restore point, you must follow these steps:

    1. Click the Start button to open your Start Menu. The Start button looks like this:
    2. Click on the control panel menu option.
    3. Click the option menu system and Maintenance.
    4. Click on the system menu option.
    5. Click on the System Protection in the list on the left.

    You will now be at the System Protection tab in the system control panel. This tab allows you to enable and disable the system restore as well as making the new manual restore points.

    8. the System Protection tab

    To create a manual restore point, you must click on the button create. When you press this button a prompt asking you to give a title to this manual restore point.

    9. Enter the manual restore point title

    Type a title for the manual restore point and press the button create. Vista will now create a restore point manually and once finished, post a notice that it was created successfully.

    10. Manual restore point has been created

    Now that you have finished doing the manual restore point, you can close the system window.

    Try to download the correct and up-to-date drivers.

    This should solve your problem.

    Let us know if these steps solve your problem.  I hope the information is useful.

    Kind regards

    Anthony
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • I am runing vista and do not know how to use the fax machine

    I am runing vista and do not know how to use the fax machine

    Here's how to set up Windows Fax and Scan: http://windows.microsoft.com/en-us/windows-vista/Set-up-your-computer-to-send-and-receive-faxes.  Navigate the reference links on the right for more information on how to send faxes and other information.  If you do this on every page you just, you can see all the articles on how to fax and scan and configure the system and solve problems, and many other subjects that may be necessary, useful or informative.  After that, you must be an expert on this subject.

    Here is a quick and easy way to send a fax in Vista: http://www.ehow.com/how_2029566_send-fax-vista.html.

    Unfortunately, the foregoing is available in Business, Enterprise, and Ultimate - not Basic or Home Premium.  In the latter, you need a 3rd party program.  If this is the case, here are some options:

    With the compliments of Bob F. http://www.vistax64.com/vista-print-fax-scan/127986-how-do-i-download-windows-fax-scan.html:

    Not available in Vista Home Premium Basic FAX. It is available in complete edition,
    Extreme and business.

    You might want to consider Snappy Fax at a low cost:
    http://www.snappysoftware.com/

    or the free version of BVRP:
    http://www.usr.com/BVRP/bvrp.asp

    or a full BVRP Classic Phone Tools 9: $29.90
    http://www.shop.Avanquest.com/USA/PR...S_CPT_homepage

    Look screen kinda gross but the product Snappy fax
    actually, is quite rich in features and works very well. BVRP also works very well,
    screen looks a bit better. Other that that, there are minor differences
    performance between the two.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Scanner EPSON Perfection V200 Photo: PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer.

    The PDF button does not work since I use the scanner with an ASUS i5 running Win 7 Ultimate desktop computer. I downloaded the 64-bit Epson software for the scanner.

    I found the solution to the problem, and it is indeed with the revised in Windows 7 Control Panel.

    Here how to solve the problem:
    Go to the control panel in Windows 7.
    Search scanner in the upper search box to the right
    You will see a "view scanners and cameras".
    Click it, you will see the Epson Perfection V200. Highlight.
    Click Properties, then Yes, then events.
    Where it says select an event, you MUST choose the event suitable for each option.
    To the Start button, choose Start the series of creativity
    For the copy button Choose launch Epson Scan
    E-mail button also Epson scan
    PDF includes Epson scan
    There you go.
    Now, all this was not necessary before, there are no instructions, and the fault lies with MS. how much more confused MS will do the control panel?

  • Not being able to use the commenting tools in Android App.

    So, I did abit of research regarding my dilemma. I wanted to just a solid understanding of my research findings.

    His my situation, my office im player capable to add Post-it notes and highlight text. When I open the same PDF file through the app Android, Im not supposed to. I get a message saying "this tool is not available because of the security settings of documents".

    My research ive concluded that it is the whole PDF encryption that is not allowing me to use the commenting tools in the Android app. Is this correct?

    Is there a way around this side just do it on my desktop/laptop computer?

    Hi Yooooda-man

    Acrobat Reader mobile products (for iOS, Android, Windows Phone) have the known limit where the changes cannot be saved in encrypted PDF documents.  As a result, users are not able to make changes (addition of comments/annotations or forms) for encrypted PDF documents.

    If you created the PDF file or if you know the password, you can remove the Security document and settings of restriction of the PDF on your desktop, so you can use it on your Android app.

    Kind regards

    Meenakshi

Maybe you are looking for