FrameMaker 2015 is no longer generate tables of contents (TOC)

Similar Questions

• Generated table of contents contains errors in the sections

  I'm working on a large document that was created by someone else. When I try to update the table of contents, there are a few spelling mistakes that are not in the headings in the body of the document (I corrected, but the table of contents are acting as errors are still there).

  For example:

  In my paper on page 32, there is a section "Fieldbus Protocol" (he was previously misspelled, such as ' Protochasl ' and I fixed it)

  It shows in the generated table of contents: 32 Fieldbus Protochasthe < < so this is to show the 'old' spelling, even though I've updated the table of contents with the page layout > Update Table of contents command.

  Is there a code behind (like HTML) for InDesign text which is perceived by the TOC generator? It acts like it is looking 'old' versions of these positions.

  Thank you!

  are you sure that this section of paragraph style is used to build the table of contents?

  There may be some invisible paragraph style which is then used to generate a theTOC

  You should check the exact name of the paragraph style that was used in your table of contents

  

• Include graphs of the icon in the table of contents (TOC)?

  Question

  Is it possible to have icons (i.e. frameworks anchored inline) automatically appear in the table of contents?

  (We translate into 15 languages, so manually add graphics to the table of contents, after its creation isn't really a viable option).
  

  Scenario of

  In our books, we include a troubleshooting section explaining her mean different icons of warning symbol. (Kind of like engine lights check various you see in cars). It would be nice to show the actual icons in the table of contents, do I hope this a little easier to find info.

  
  

  We do not include the icons in actual positions in the book using anchored frames "Shrink Wrap", but each anchored picture is replaced with a space in the auto-generated table of contents. (This is what we want in most cases, just not this particular case).
  

  Plug

  We work in unstructured FM 11.

  Thanks in advance,

  Jason Nichols

  If you are ready to have a paragraph format separate for each variation of the icon, you may be able to use the image above each corresponding to xxxTOC tag property to its icon, using negative space Frame - over hack Arnis described lately to:

  The numbered steps circled are possible?

  This will pollute the paragraph of course catalog.

  I'm rather tempted to use a rendering of the font tool to convert your icons of character glyphs in Unicode E000-F8FF private use area *. Then, the icons are just text introduced in each topic. Note: in a position of switching character Formats breaks automatic hypertext in the table of contents. See:
  Color of the page number in the table of contents

  The problem of termination of the link could be avoided by using a Unicode open license text font which is similar to your favorite title font and adding glyphs to icon for private use. Then there is no change of character format in the relevant TOC entries. Of course, turning your icons in glyph police presume you have vector art for them which is easily converted to outlines, otherwise it will be a great effort.

  _____

  * I should avoid areas of private use A or B, because the scope on planes 15 and 16 (more than 32-bit code points).

• Captivate Table of contents (TOC)

  Hello

  I am putting together a multimedia CD in Captivate, which will be essentially a nice interface for users to navigate to attached PDF and DOC files and a little video instruction here and there.  I want to include a search and table of contents installation and the integrated to captivate is ALMOST PERFECT!  However, the current time/total time box downstairs would make no sense to users that it is a multimedia CD.  I wish that hide.  Also, the search button requires clicking to open the search text box.  I got some comments saying that they did not see where to type their search text (they didn't know they had to click search, so I hope to be able to change the text on this button "Click to search" or something like that.)  If we can hide the time/total current box, it would be preferable, because it seems to me, and others like this would be where you would type your search text (as it is next to the search button).

  In addition, if possible, remove icon star bookmark at the top completely, because they are not really needed and I want that interface for the users to be as simple as possible.

  I have ideas, or other means to implement a search tool.

  So you can see what I'm talking about, I've included a screenshot of my current interface.

  Thank you.

  

  Hello

  Thanks for the reply.  I actually ended up using Widget factory to write my

  Widget to do the work to hide the time Board TOC.

  Here's the code I used:

  var movieController:Object = widgetSlide.m_movie;

  movieController.getTOCContainerMC (). TOCBox_mc. TOCFooter_mc. TOCFooter_Text.vi

  possible = false;

  movieController.getTOCContainerMC (). TOCBox_mc. TOCFooter_mc.timeBack_mc.visib

  = false;

  Thanks again for the help.

  From: Lilybiri [email protected]>

  Answer: [email protected]>

  Date: Thu, January 12, 2012 20:40:00 - 0700

  From: Alex Dillon [email protected]>

  Subject: Captivate Table of contents (TOC)

  Re: Captivate Table of contents (TOC)

  created by Lilybiri http://forums.adobe.com/people/Lilybiri> in Adobe

  Captivate - See complete discussion

  http://forums.Adobe.com/message/4134857#4134857>

  Hello and welcome to the forum, perhaps this widget created by Michael Lund

  (cpguru) can help you:

  http://www.cpguru.com/2010/09/01/hide-TOC-duration-widget-for-Adobe-CA

  ptivate-5.

  http://www.cpguru.com/2010/09/01/hide-TOC-duration-widget-for-Adobe-Captiva

  you-5 / > Lilybiri

  Responses to this message come to everyone subscribed to this topic, do not

  directly to the person who posted the message. To post a response, a response

  for this send an email or visit the message page:

  http://forums.Adobe.com/message/4134857#4134857 To opt out of this

  wire, please visit the message page to

  http://forums.adobe.com/message/4134857#4134857. In the Actions box on the

  on the right, click the link to stop e-mail Notifications. Start a new discussion in

  Adobe Captivate by email

  <>

  orums.Adobe.com > or Adobe Forums

  http://forums.Adobe.com/choose-container! input.jspa? contentType = 1 & container

  Type = container = 2267 & 14 > for more information on maintaining your forum

  e-mail notifications please go to

  http://forums.adobe.com/message/2936746#2936746.

• Creating hyperlink in the generated table of contents

  Hello

  I use InDesign CS4 and the difficulty to create hyperlinks in my automatically generated by Table of contents. I can create the destination in the document, but then the opportunity to create the new hyperlink (from Interactive menu drop-down) in the table of contents has disappeared. Option is not visible anywhere elsewhere in the document, or if I create manually the table of contents, just doesn't seem to work with generated automatically a.  Does anyone know if this is a known problem in CS4?

  Have you tried checking the "Hyperlink" box on the PDF export?

  

• FXL ePub book file doesn't generate table of contents

  The navigation of the table of contents in the iBook reader lists all pages of the fixed Indesign layout, any Option Export eBook, I chose, with the exception of no 'none '.

  Hello

  You will need to define it in the source document style of the book. Also please see if your table of contents works in single document itself to check the table of contents style is correctly set.

  Thank you

  -Anshul

• Entry entry not added to the automatically generated table of contents

  Using RoboHelp HTML 11.

  I'm linking a Word document into my project and have it automatically create the Table of contents. I create new pages from the Word title 1 and title 2.

  As a general rule, a section in Word will be like this:

  Heading 1

  Body

  Section 1.1

  Body

  Section 1.2

  Body

  In the table of contents, it will create a book labeled "Heading 1" and pages for 1.1 and 1.2 position position. There is no page for heading 1 or the body of the text that goes there.

  I can manually add the title page 1 of the book, but I suspect that I don't have to. Y at - it a setting I use wrong? Or a tip or solution?

  
  Thank you.

  -Shawn

  If you click on the book for heading 1, it go to the right place and show the body of the text?

  Separate headings are created for heading 1, section 1.1. etc., or is - this a topic with the table of contents goes to the required place?

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Hide icons to expand/collapse for Table of contents (ToC)?

  Hello

  I have a project that requires the summary function that comes with the table of contents turning. However I do not want a visible knock on it.
  I went to overlay, set it to collapse all and the alpha value to 0%, which pretty much done the work, but I find myself with the arrows to expand/collapse on my slides.
  I read that you can replace these transparent png files and I want to do, but don't know where to find the icons to replace them.
  Can anyone tell me what their file names or folder in which they are stored in please?

  Simply use the navigation buttons to select your transparent png

  

• InDesign CS4 table of contents (TOC)

  Hello

  I created a table of contents in Indesign CS4 by configure headers and styles of subtitles in the paragraph style. In a section of the book, I would exclude the subtitle, but include it in the table of contents. I don't know if it's possible, know the behavior of TOC recognizes only the content of the page.

  We can include subtitle in the table of contents the same when it is not visible on the page?

  Thank you

  Sutagami

  Joel Cherney wrote:

  Put on a nonprinting layer visible, is a good idea - I'll probably end up doing it by the departure, instead of just leaving a random text box.

  Another useful technique is to put your table of contents entry in an area of anchor text and anchor text you want in the table of contents entry to designate, so if your doc is redéroule, the table of contents with it input stream and the page number in the table of contents will be updated correctly.

  Unfortunately, that is not compatible with the technique of the separate layer

  Anchored objects must be on the same layer, but you can assign not printable.

• Page numbering and the Table of contents

  I have a book containing 23 document files. Document files contain the page numbers in the footer.

  One of the document file is a generated table of contents (TOC). Unfortunately, the generated page

  the number in the table of contents do not match the numbering of the pages in the files. Here are the details:

  • The title page, in a file by itself, is not numbered
  • The frontmatter, distributed in five cases use lowercase Roman (i - xvi)
  • The body of the text in the remaining 17 files is digital (1-243)
  • The generated TOC uses cardinal numbers of the book as a whole. For example,.
    Chapter I is numbered correctly in the footer from page 1. However, he is listed in the table of contents
    as starting on page 19, because this is the file real 19th in the book. I put the document numbering
    This file from 1 properties and properties of Page numbering for the book as a whole to
    be "continue."
  • The style of the table of contents entries is correct. In other words, the frontmatter uses a tiny Roman and the
    chapters use Numeric

  I tried to regenerate the table of contents, but this did not help.

  Does anyone have suggestions on what is the way prescribed to do?

  OK, I continued to read and this is what I found:

  Set the numbering style in the document, and not in the book that we told you. Format > Document > numbering. Choose Arabic or digital. Repeat for the various chapters.

  

  Save and close the chapters. In the book file, click with the right button on each chapter and choose Configure XXX. This is where tell you the book to continue the page numbering or restart at the 1.

  

  Once this is done, update your address. From there, if there are issues, we rely on the logic of the Fm we use every day, and each of us can help you solve.

• When I generate the table of contents from a new .book, I get blank pages between each page of the table of contents

  With FrameMaker 2015. When I generate the table of contents from a new .book, I get blank pages between each page of the table of contents, they are totally blank does not even a block of text. I click on Add> autonomous Create TOC. I keep the default settings. And that's what I'm left with.

  

  I can get rid of them by special> Delete page. But I never had to do before the 2015 version. I tried with older files generated in frame 10. same thing. If someone has encountered this?

  Master Pages are part of each document.

  You can import master pages from another document (i.e. a ' model') in your current document using the file > import > Formats... option and select layout from the list (deselect all others).

  If you have changed the current TOC for the problem of the Page Master on the left, then simply save the file and use the Edit > update book option for that OCD regenerated by using the new page templates.

• Using Framemaker 7.2. Create a table at the top of the first page

  When I try to create a table with four rows and two columns, it appears on the top of page 2, and not page 1 where I want. I can't find a way to anchor it at the top of the first page. What I am doing wrong?

  Dennis...

  Moreover, in FrameMaker 2015, there is also a table format 'catalogue' as you know from the catalog of paragraph and character style. This makes it very easy to assign table models to the tables (see here).

• RH10 fails to generate the table of contents or index

  RH10 has not generated table of contents or index once I have updated a reorganization project and removal of several subjects. I used the editor of broken links to create new links, but this does not solve the problem.

  Hello again

  In this case, it would appear that you may need to apply some patches of RoboHelp. See the link below and take these measures.

  Click here to see

  See you soon... Rick

• I can't get the page numbers in my table of contents to update when I update the book.

  
  I use Framemaker 11 and I have two tables of contents in my book: one in English and French. Each table of contents to links to various documents in the same book. The reference page for each table of contents is defined and properly displays the positions 1 and 2, I said that it appears, but numbers not updated when the contents of my document files change to another page. I checked the settings of conditional text in my document files; they are correct. When I update the book, I choose to update the numbers, all the cross-references, all text inserts, OLE links, generate a Table of contents, lists, and indexes. What I am doing wrong? Thank you.

  If they are not knocked down, then they are certainly not generated files. See the example in the help of FM11: http://help.adobe.com/en_US/FrameMaker/11.0/Using/images/bk_hier_books.png

  The 'K' is a TOC file that FM recognizes a generated file.

  Because you have created your table of the contents of the French with the help of another structure of the book, you could import reference this TOC file in another file of FM (for example to create an inset text) in the main book you want. However, you need to make updates in two steps. First update the French book to revise the table of contents. Then update the main book to get the rest of the correct pages (and given that the table of french contents are imported by reference, FM always uses the most recent version).

• How can I add a caption to a table of contents?

  I was assigned the role of building a model Indesign to eventually replace the Word MS one that we currently use, but I have never touched this software before. With a lot of Googling, I groped my way through it a little, but I can't seem to understand this one.

  If I just add, it is deleted on update, so... I am at a loss. The only option is to stay another text box there? I was trying to avoid this.

  

  I just frome background coding so I'm not dodge this option if possible.

  Don't know what it is you are trying to do here.

  A table of contents are based on the paragraph styles you include, and it should be in its own frame, do not put on other stories. Do you mean, perhaps you want a column on page numbers?

  You can add that the insertion of a paragraph above the first listing in the generated table of contents (when it is placed, you can edit it normally like any other story), but you have to do every time the table of contents are updated. You can also change the 'content' line to read the content ^ n ^ yPage and then create a GREP search in find/replace to Find \^n\^y and change it to \n~y and it will add the linebreak and a withdrawal to the right tab. The ^ n ^ y is not a code required in this case - you can use what you want as long as it appears nowhere else - and you can use any sort of tab you like after the break, too. If you save the query, find/replace, it will be slightly faster that back manually after an update of the table of contents.