Creating hyperlink in the generated table of contents

Similar Questions

• Generated table of contents contains errors in the sections

  I'm working on a large document that was created by someone else. When I try to update the table of contents, there are a few spelling mistakes that are not in the headings in the body of the document (I corrected, but the table of contents are acting as errors are still there).

  For example:

  In my paper on page 32, there is a section "Fieldbus Protocol" (he was previously misspelled, such as ' Protochasl ' and I fixed it)

  It shows in the generated table of contents: 32 Fieldbus Protochasthe < < so this is to show the 'old' spelling, even though I've updated the table of contents with the page layout > Update Table of contents command.

  Is there a code behind (like HTML) for InDesign text which is perceived by the TOC generator? It acts like it is looking 'old' versions of these positions.

  Thank you!

  are you sure that this section of paragraph style is used to build the table of contents?

  There may be some invisible paragraph style which is then used to generate a theTOC

  You should check the exact name of the paragraph style that was used in your table of contents

  

• FrameMaker 2015 is no longer generate tables of contents (TOC)

  All of a sudden, some people in our team cannot generate tables of contents in FrameMaker 2015, while others may still. We could all generate TOCs without problem until this week (at least, this week is when we noticed the problem). Are there known issues with the 3.1 update that was released in April (I think)?

  When we select Add > > create Standalone TOC, FrameMaker creates a TOC file and adds it to the book, but the file is completely empty. When we try to update the TOC file, nothing happens. When we try to create/update fakes with other books and models, same thing.

  Other people are able to create/update TOCs with these same files. We have not been able to determine what is the difference which is causing the problem.

  Those of us with the problem all seem to have 2015 FrameMaker version 13.0.3.495 installed. But at least a person who has the same version of hotfix can create/update TOCs. (We are all on Windows 7, 64-bit).

  Any suggestions are greatly appreciated. Thanks in advance,

  Jason nichols

  Jason,

  We have introduced an OCD related bug in update Fm 13.0.3 where in unstructured books OCD is not generated in structured mode.

  As a solution, he is requested to work in unstructured for unstructured books Mode:

  1. edit > Preferences > Interface product > select FrameMaker > restart FM

  2. open the book > Update > should work

  We work for a quick update for the same thing.

• Unable to translate the text strings in the menu table of contents (Cp5)

  Heyo,

  I am creating the French eLearning with Captivate 5 language. As part of this process had to make a version in French of our existing PlayBar (which was an adaptation of the BlackGlass.fla AS3 playbar file that comes with Captivate 5).

  I was able to update all channels language of Flash CS5 from the video for location (there are instructions in the ActionScript code that indicates where this). However, the table of contents menu that opens doesn't have strings translated, as I yelled at my screen shot below. There are at least four strings that need translation: bookmark (that appears as a ToolTip when you hover over the star in the upper left corner), the slide title, duration and Minutes (bottom).

  As far as I know, this logical problem because the bar read FLA files provided do not appear to contain the menu table of contents, only the button table of contents. However, there is nowhere the Captivate software where I can see the ability to change it. Is - this bug I should report?

  

  Hello

  I don't know if Captivate 5 behaves as Captivate 4 does with that. If so, maybe the link below will help:

  Click here to see

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• Off ads create hyperlinks in the stories I read

  Hello, I've noticed lately that seems to be corporate external ad create hyperlink in the stories I read. This is not the case when I use Internet Explorer.

  I checked with the Publisher of a site I visit (psmag.com) and he said that they don't on their end, and they do not see the problem I'm talking about. But, their front page, in four stories there was a word that was a larger font than the rest of the words, and it is a hyperlink to the outside ads. This happened again and again for the past 2 or 3 weeks on different sites. What is going on?

  These links they pointed out twice? If so, it could be textsrv it. You can block textsrv.com with Adblock Plus by adding this announcement Custom filters blocking rules. textsrv.com / *

  If not, maybe you have some malware installed. Try the software listed here:

  • Malwarebytes' Anti-Malware - http://www.malwarebytes.org/mbam.php
  • SuperAntispyware - http://www.superantispyware.com/
  • Spybot Search & Destroy - http://www.safer-networking.org/en/index.html
  • AdAware - http://www.lavasoftusa.com/software/adaware/

  If they can't find it or cannot delete it, post in one of these forums using specialized malware removal:

  • http://www.spywarewarrior.com/index.php
  • http://Forum.aumha.org/
  • http://www.spywareinfoforum.com/
  • http://bleepingcomputer.com/

• Adding a button before the button table of contents in a WebHelp Pro navigation bar

  My customer wants to add a "Home" button to the left of the button table of contents in the navigation bar. I can button ad to the right of the 'standard' buttons: table of contents, search, print, and glossary, but even if I go and edit the skn file and add the 'Home' botton before the table of contents one, it always displays to the right. Is that all that I'm missing?

  Thank you.

  Using RoboHelp 9 and Robohelp Server.

  Thank you

  Hello

  I have HR server, so it's kinda a guess but I think as a method of work.

  Change the order of the toolbar in the whstart.js file.

  1. in the whstart.js file, go to line 184 (RH10), it has the text ElseIf (nMsgId == WH_MSG_TOOLBARORDER).

  2. we will find the opening brace, add the following code:

  oMsg.oParam = "CUSTOM" TOC | GLO | IDX | FTS | blackblock | searchform | banner ";

  Returns false;

  3. open whskin_tbars.htm and go to the bottom of the file to find some calls starting with addButton.

  4 Copyt the id of the button (customxxxx) and replace the CUSTOM in the whstart.js file text.

  Change whskin_tbars.htm

  1. open whskin_tbars.htm

  2. go in the bottom of the file and find some calls starting with addButton.

  3. fix the lines in the order you want the buttons to appear. (Remember the "blankblock" button to push some content to the right of the toolbar.

  4. remove the call to the ReSortToolbarButtons() function in the whskin_tbars.js file.

  If WebHelp always use the buttons, try adding return false; as the first code of the ReSortToolbarButtons() function in the whtbar.js file

  Hope this helps,

  Take a bow

  Willam

• Chapter with Figures OCD does not end up in the main table of contents

  At the end of my document. I have a list of numbers. This list of figures has its name in my chapter paragraph Style. At the beginning of my document, I have a main table of contents. When I update the table of contents, list of figures chapter would end up in the main table of contents. Is there something I can do to fix that? I was thinking of a hidden layer with a second title of chapter for a list of Figures, but it's a hack. Is there a better way?

  I was able to get the table of contents to update correctly. I did two things, and I don't know which was the right one, or if you need to do both, but here's what worked:

  Export the list in the history of the figures to tagged text, and then disable Smart Rflow text and remove all executives who are in this thread, so history has completely disappeared from the file (but the pages are left behind). File > Place... and choose the story exported and auto-flow, then select those images and change the number of columns. Now, select and delete the existing text in the history of the table of contents (I left executives), then layout > TOC and regenerate.

• How to change the width of the component table of contents

  9 RoboHelp, WebHelp Pro, WebHelp Server

  I want the component table of contents to be wider that when managers WebHelp default window opens. How can I control this?

  Hello

  As Peter mentioned there are continuous thread in which I mentioned the name of the file in which you can change the value, this file is available I Robohelp server publishished to the project but is not standing, then you must change the value each time only time publish. Check the wire and let me know if you have any doubts.

  http://forums.Adobe.com/message/4638778#4638778

  In server you will find your published project: it's my location of machines, you will need to check with your COMPUTER administrator who configures the server.

  C:\Program Files\Adobe\Adobe RoboHelp Server 9\robo\server\general\

  Thank you

  Priyank

• How to create indexes on the nested table.

  Hi all
  I held the syntax to create indexes on the nested table.
  
  I found below synta but when I try it with my table it gives me error
  
  CREATE UNIQUE INDEX indx_name
  ON nestedtablestore (NESTED_TABLE_ID, id);
  
  What is here NESTED_TABLE_ID & ID

  They are virtual your nested table

  Here is an example.

  create or replace type obj as object (no integer, address varchar2(100))
  /
  create or replace type tbl as table of obj
  /
  create table test_tbl (id integer, name varchar2(100), address tbl) nested table address store as address_nt
  /
  create unique index address_no_idx on address_nt (no, address)
  /
  

  Published by: Karthick_Arp on November 23, 2010 01:41

• Hide the items in the menu table of contents

  Hello!

  I'm doing an iPad magazine and I have a question about the menu table of contents.

  One of the FAKE paintings, go to an index page for one of the parties in the magazine.

  So, I wouldn't have the other articles in this section to display in the menu table of contents.

  How can I do? The only way I know to leave items on the menu of the table of contents should mark them as ads.

  Which is the way to do it or there at - it another way to solve my problem?

  Another question about metadata, you must enter. That means "Tags"? What to write here?

  Thanks in advance!

  / Karin

  70 x 70 pixels

  Herzliche Grüße | Kind regards

  Ulrich haha

  PS: E-Learning mit ulrich-media:

  http://www.e-College.ch

  --

  u r i c h - m e d l I have a G m b H

  http://www.Ulrich-media.ch

  10/6/2011 karin_strom [email protected]>

  >

  Another wuestion in the pictures of the table of contents:

  What is the best size/dimension to make them in?

  Right now they look a little pixelated.

  >

  / Karin

  >

• Adobe Captivate 7 - How to create a custom without the function table of contents table of contents?

  Hello

  I want to create a table of contents in my E-Learning-project because the automatically generated TOC of Adobe Captivate 7 includes all the features I need to check for example chapters which are the groups in the film strip.

  
  I use master slides in my project.
  The table of contents, I need must be designed and programmed as follows:

  1 intro / title slides

  9 chapters

  The progress of the work - 3 status - all chapters should be moved by symbols in the table of contents

  Symbol 1: chapter has not yet begun (just an empty box)

  Side 2: chapter is work in progress (a square with a green triangle inside)
  Side 3: chapter is finished that means that all of the slides in this chapter are read (the square is filled with a green square)

  All the chapters and Points to the table of contents must be clickable (links) maybe with a mouse over effect (change in colour of mouse) and should start to the first slide of this chapter.

  The chapter which is open must be written in bold with one blue color, others who are not open to be written in the normal font with a black color

  I think it's a little complex, but solutionable.

  I think I need to create three symbols of the buttons form, advanced actions that tend to fade and fade out named symbols.

  Is there someone who can describe the process of creation? Where should I place all the functions, actions and so on? On the slide master?

  Thank you for the answers!

  The only thing I can say about it is that I build it in Flash, so it could be dynamic and reusable.

  If you take the time to build a PC inside it only works for one project. Certainly you would have a base to work from, but for a another edition project wouldn't be fun.

  If you need HTML5, I think it would be much more difficult to build a dynamic table of contents.

• Entry entry not added to the automatically generated table of contents

  Using RoboHelp HTML 11.

  I'm linking a Word document into my project and have it automatically create the Table of contents. I create new pages from the Word title 1 and title 2.

  As a general rule, a section in Word will be like this:

  Heading 1

  Body

  Section 1.1

  Body

  Section 1.2

  Body

  In the table of contents, it will create a book labeled "Heading 1" and pages for 1.1 and 1.2 position position. There is no page for heading 1 or the body of the text that goes there.

  I can manually add the title page 1 of the book, but I suspect that I don't have to. Y at - it a setting I use wrong? Or a tip or solution?

  
  Thank you.

  -Shawn

  If you click on the book for heading 1, it go to the right place and show the body of the text?

  Separate headings are created for heading 1, section 1.1. etc., or is - this a topic with the table of contents goes to the required place?

  See www.grainge.org for creating tips and RoboHelp

  

  @petergrainge

• Cannot create indexes on the flow table

  Hello

  I'm new to ODI.

  The problem is that during the execution of an interface, I get the error of the "IKM Oracle Dimension to slow variation"

  The command in step "Create unique index on the flow table:

  creating index < % = odiRef.getTable ("L", "INT_NAME", "A") % > idx

  on < % = odiRef.getTable ("L", "INT_NAME", "A") % > (< % = odiRef.getColList ("", "[column]", ",", "", "SCD_NK") % >)

  < % = odiRef.getUserExit ("FLOW_TABLE_OPTIONS") % >

  generate the following statement which lacks the name of the column between the (_)

  Create index I$ _MYTABLE_idx

  I have $_MYTABLE)

  NOLOGGING

  The result is that the interface fails with the error 936: 42000: java.sql.SQLException: ORA-00936: lack of expression caused by the previous command wrong.

  Please, can you help me?

  Thank you very much

  Angelo

  Hello

  I'm really really sorry! I just realized that you are working on the SCD. Basically, you are looking for all the column mapped as SCD_NK (key to slowly change natural Dimensions) insofar as shown here

  Substitution QAnywhere

  IF you need to read this

  SCD Type 2 - ODIExperts.com

  Let me know.

• A different function is created instead of the expected (table Index instead of initialize array) Labview - a 8.5

  Hey all,.

  I have a really strange behavior here. I'm using LabView 8.5. I open a white VI and try to use the function "initialize the array.

  No matter where and how I find (using search functions, or by accessing the 7.x-> table-> table initialize function), when I drag and drop it off at my VI, what I get is "Array Index" instead!

  Even when I hover over the icon table inside the palette is initialized, with aid switched on (Ctrl + H), what I see is the help page for table of Index. It's as if somehow the index table replaced function Initialize array entirely, with the exception of the simple icon in the palette...

  I tried to restart Labview and my computer nothing works.

  Someone at - he never experience a similar problem? that means, one different function other than for being created. I have attached a screenshot.

  Thank you

  -Anne Marie

  Thanks for your replies.

  My palette is screwed a bit isn't it? Most likely because the installation I chose a bunch of older versions in favor... and I regret it now.

  Funny enough, during the search in the functions that it only brings me version 7.x of functions of table etc... but I can manually find the standard in my palette, and of course, version 8.5 standard functions seem to work...

  I need to finally do an install of cean, but for now, it's all good!

  Thank you

  Anne Marie

• Is it possible Muse to create hyperlinks to the button I created on board animate? How?

  Hey, guys... My question is if it is possible to create hypertext links to the buttons I created on board animate.

  I exported in ".oam" from the edge, but when I opened in Muse, the hyperlink option wasn't there.

  So, it's possible?

  Hello

  Please visit the following link Add a hyperlink to the animated button created in edge.

  Kind regards

  Aish