Frames from end to end

Similar Questions

• How to get to each code pixle frame from any video mp4 in c#

  How to read each code pixle frame from any video mp4 in c#

  How to save images in format Mp4 video

  Hi SalmanKhaled,

  The question you have posted is related to Visual c#, and it would be better suited to the MSDN Community.
   
  Please visit the link below to find a community that will provide the support you want.

  http://social.msdn.Microsoft.com/forums/en-us/csharpgeneral/threads

• SSL from end to end with insertion of Cookie for config sticky help

  Good day to all,

  Received a new request from my customer to provide the SSL (front-end and Back-End) endpoints on the ACE module.

  Here is the list of requirements:

  (1) stop of SSL customer to the AS - key size 2048

  (2) introduction to the real servers - key size 1024 SSL

  (3) Insert cookie for sticky - provided by ACE

  (4) predictor - Leasconn

  (5) mode - bridge

  I searched the Forum and other sites, and I would like to get clarification on a few things that I understand the problem;

  Thank you in advance for taking the time to read and give me your comments/suggestions:

  (1) my client has provided the certificate for their application, I need to import about ACE. question about it, do I need a certificate for each VIP I configure on the ACE for termination for all future requirements?

  (2) do I need to install a certificate on the ACE to (initialize) the real servers? If so, first generate the key and follow up the instructions to ask CSR?

  (3) to create the Insert for the sticky cookie, is the following commands all that I need to apply:

  ACE-Insert cookie http-post-it web-sticky

  browser-expiration of cookie insert

  Timeout 5

  Serverfarm my_server_farm

  (4) if I lab, a lab environment, can the certificate be exported first and then imported to the ACE of the Production, or each environment should have its own certificate?

  An example configuration that someone could share would be also greatly apprecaited.

  Thank you

  -Raman

  Hello Raman,

  In fact, there is a small typo. Correct your understanding about the probe. The port of the probe must be 443 as you pointed out or one probe https http and no probe, if port 80 is used.

  In addition, it is not mandatory to have two serverfarm in the case of end to end ssl (if that's what you ask after referring to the example). In short:

  SSL---> customer termination---> ace---> RSERVERS.

  Communication between the client and ACE is encrypted. Rservers ACE is clear. So here you have rservers to listen on port 80 or 8081 etc. Survey should be on port 80.

  Initiation of SSL---> in this case communication between ACE and rservers is encrypted. Therefore the probe should be port 443.

  End to end SSL---> in this case that you must book for listening on 443 and front end as backend is encrypted. Survey should be on 443.

  Also, troubleshooting ssl commands would be:

  show stats client crypto

  show crypto server stats

  I hope this helps.

  Kind regards

  Kanwal

• Black frames at end of animated gifs

  When you make banners using AE to convert 3 to 5 seconds of video in animated GIF, I noticed that there are always black frames at the end that appear each time the banner is played repeatedly. However, these frameworks do not seem to occur if the output is swf files. Y at - it a medium format or source to work around the problem of black frames with animated gifs? I not had this problem with other software gif animated, that I used, but the quality of the EA is better, other than this issue. Appreciate help with this.

  Just checked the help files and the SOUL supports animated gifs but only on Windows. Sorry I missed it.

  If you get black images at the end, then simply adjust the point of exit in the SOUL. You probably see a set cadence match. Fix you this in AE and not a SOUL.

  Useful for Animated Gifs should have a very low number of executives and a slow pace to be useful. 3 seconds to 29.97 FPS will make a big enough file for a banner size. Not see the project, but looking at the description I was wondering if your comp is 29.97 FPS, but you've made your gifs at 15 frames per second or even lower. If this is the case, that the black frames at the end could easily be the result of some funky things going on with the gif rendering engine.

  I still maintain my suggestion to use a film in Photoshop. Most of animated gifs that I created require different lengths for different periods. I'll start with 5 frames a.1 seconds for a transition, then hold the 6th framework during 6 seconds, then the transition to slide with 1 more pictures a.1 2 second, then the frame h 17-6 seconds and 12 seconds of animation gif with 17 images. You can't do that with the SOUL, you would end up with an animated gif with 120 frames for the same thing.

• Generating dates from end of month

  Hello

  I have a table with a column as a partition_key, I want to insert all the end dates of month of Jan2009 to Dec2013 in the format below.

  PARTITION_KEY

  20090131

  20090228

  20090331

  .

  20120229.

  .

  20131231

  Please tell us a plsql sql statement (GOLD) for this block.

  SELECT last_day (add_months (DATE ' 2009-01-01',(level-1)))

  OF the double

  connect by level<= months_between(date="" '2013-12-01',date="">

  /

  is good to create lines, how you convert a date in number is easy to find...

  HTH

• Error messages from end of file and preferences at boot

  So I have Photoshop CS5. I get an error message when I boot. End of file error message, first THEN saying could not initialize Photoshop because the preferences file was invalid (it has been deleted). So I uninstalled Photoshop using the button uninstall the app, then re-installed Photoshop but the same error message appears when I re - install Photoshop so what's the problem here?

  Preference files will survive a uninstall and re - install. Then reset using the shortcut when you start Photoshop.

  • Reset the Photoshop preferences?

• Someone at - it a flowchart from end to end (or some sort of page document) for the Page of Google-&gt; Eloqua - Salesforce destination?

  We are testing Google AdWords landing pages, include Google Code SFDC, and I was not able to visualize the complete flow of information between the Eloqua and SFDC launch page. If anyone has experience with this integration, I'd love to hear from you.

  Hi Tom,

  I presume that by Google for code SFDC, you are referring to the javascript sfga.js that feeds on Google Adwords information in Salesforce.  If Yes, then the integration between Eloqua, Salesforce and Google requires 2 forms: Eloqua form and a web Salesforce to run the form.  The imformation flow is as follows:

  When the sfga.js javascript is added to a form of the landing page, it changes the action of the form parameter to publish your form data on a managed server from Google Analytics, who will then report data to your original form target. in this case, Eloqua.  When the bid hits your form Eloqua, Eloqua will execute any form of processing steps and then should republish your data to your Salesforce web to lead form using the data of publication in server processing step.  If you want to avoid creating duplicate in Salesforce leads, you can make this conditional on a database search aseo so that it will run only if the contact who sent the form does not have an ID of lead.  When the form data are displayed to Salesforce, a new track is created.  About 15 minutes after the presentation, the scripts of Google will sync with Salesforce and check for recently created conduit that the information corresponds to the data submitted by the form; If there is, the fields of lead sources are updated.  I hope it's useful.

  Ryan Wheler

  Product specialist

  Eloqua

• Reverse the Action of the button frame from 130 to 100

  This led me into the wall, I still get the problem.

  I'm creating a presentation that simply scrolling text and a background image from right to left when I click on a button. Simple enough, but all the hell breaks loose when I want to do it in reverse. I can use the gotoAndStop command, but this looks pretty unprofessional because it is used in a presentation, in which case I might have to go back. I would rather than snap.

  I'm literally about to go crazy and do not tell me to make a layer to simulate a setback.

  I could start to go backwards, but not stop, and I barely know the code yet. For some time, I opened this tedious program.

  Button is called Backwards1.

  The code before help not show what you did wrong, especially if it works.

  As I said, go back along the timeline to continually take back a frame at a time until you reach the setting of destination.  To treat all the time something at the rate of your file, you can use an ENTER_FRAME event listener.

  Backwards1.addEventListener (MouseEvent.CLICK, goBack);

  function goBack(evt:MouseEvent):void {}

  this.addEventListener (Event.ENTER_FRAME, rapid decline in power);

  }

  function stepBack(evt:Event):void {}

  if(currentFrame == 100) {}

  this.removeEventListener (Event.ENTER_FRAME, rapid decline in power);

  } else {}

  prevFrame();

  }

  }

• Stop the Modbus slave server works if have the request to address 0 frame (from

  Stop the Modbus slave server works if have the request at the address 0 (broadcast massage) frame

  Hi alexart,

  How do you define the address 0? When I put my server Modbus slave address 0 in the communication parameters, it is by default to 1, so I am not able to change the address 0.

  In addition, the server does not work? What is happening and how do you know? Is there an error code, or what else is happening?

  Kind regards

  Stephen S.

• 'Make frames from layers' &amp; ScriptListener

  In the timeline for animations, there is a drop down (?), one of the options is "Images of brand of diapers. I would use this action in a script that I do, but cannot capture using ScriptListener.

  For now, I managed to achieve the same functionality "manually" using script, but when dealing with hundreds of layers, its extremely slow, so that the "Make frames layers" is almost instantaneous.

  How can I use it? Therefore not get captivated by ScriptListener?

  I can read this scriptlistener...

  executeAction(stringIDToTypeID( "makeFramesFromLayers" ), undefined, DialogModes.NO );
  

• Hello. I do not seem to have 'create frames from layers' option of time line.

  Hi, where can I find the framework for the creation of the layer option in the time line?

  

  First, you will need to click on the big button in the middle of the timeline, so that Photoshop knows that you want the animation to image.

• ? How to import NEF RAW photo frames from XQD for LR - 6 cards?

  Just bought the last Nikon D500 using two XQD & SD cards. Still using old LR-4, wish to update LR-6.

  However discussions with Nikon technicians explain why my LR-4 cannot read XQD NEF Raw files. Apparently LR does not currently recognize new XQD NEF Raw files. Even the current LR-5 is only on Camera Raw 8.6 & LR-6 will not no more until he is with I think that Camera Raw 8.7? (required for Raw XQD files)!

  So I'm only using the cameras SD card slot for now.

  He explained to me the only option right now is to download the software Nikon Capture NXD (I) import the new XQD map Raw images *, then convert it to Tiff files, then can import into my LR-4 for work and then produce best JPGs of.

  (to try, but looks ok).

  * (Get your hands on a card XQD reader who is "in stock", it's another delay, however issue a separate).

  (if it is true that the current LR - 6 cannot read Raw XQD files)

  My Question is, what LR6 will become Camera Raw 8.7 or what ever C - Raw version is needed to do?

  Of course, I do not wish to move to LR - 6, until this was done.  Grateful if someone knows the answer.

  1. The Camera Raw plugin is only used by Photoshop and Bridge
  2. Lightroom does not use the Camera Raw plugin. Camera Raw support is integrated into the Lightroom program code. To update or update of Lightroom and camera new support is included.
  3. Lightroom 6.5 is the latest version of Lightroom.
  4. XQD replaces the CompactFlash card. If your operating system recognizes XQD cards, Lightroom can read the data about them.
  5. The D500 was first supported in Lightroom 6.5. If you are using a version prior to version 6.5 (4.0, 5.0, 6.0), then you will not be able to open the Raw files. You must run 6.5 or a later version.
     Devices supported by Adobe Camera Raw
  6. If you continue to use Lightroom 4 then you can use the free Adobe DNG converter to batch convert D500 Raw files to DNG - one open Raw format developed by Adobe to keep the camera owners to have to deal with the owners of Raw formats such as NEF (Nikon) and CR2 (Canon) and software incompatibilities such as you are now facing. Then change the DNG files in Lightroom 4.
     Digital Negative (DNG), Adobe DNG Converter | Adobe Photoshop CC
     Camera Raw: How to use Adobe DNG Converter - YouTube

• How to make frames from layers

  This feature has been removed, or I can't find it in its usual place.

  What version do you use?

  In Photoshop CC,.

  • Make visible mounting Panel by choosing window - timeline
  • Click on the [create the Animation of image] button in the center of the timeline panel.
  • Click the pull down menu in the upper right of the timeline panel and choose the images made of layers.

  I hope this helps!

  -Christmas

• Extract frames from video

  Is it possible to record a video output image in a photo as a tif file?

  (With the help of CS5)

  Dean

  You can "export" a framework as such through SOUL

  Tip: The camera icon at the bottom of the screens does the job as well

• y at - it end users in a place can give suggestions on the improvement of firefox?

  I was wondering if there is a place in the forum that accepts suggestions from end users who would greatly improve the use of firefox?

  My suggestion is related to the customization of the browser layout.

  It would be nice if we could put "breaks" in the bars going across the top and bottom,  so that when we add one of the shortcut icons, they don't all bunch up on the left side of the browser.
  

  For example put privacy related icons on the left, all the navigation icons in the Middle, and all the icons on the right side cat. In this way they are not all grouped on the left is a small area.

  So it is easier to see related to the security of information while not being not distracted by chat associated icons for example who are concentrated on the right next to him.

  This is a very good example of what I mean of the VLC interface customization.
  http://www.VLC-Player-download.com/VLC/interface-customization.html

  Note the "<>-" having said space put here between the control icons.

  Maybe it's all what you need is a square that is empty without an icon that can be placed on several occasions to give the user control is how much space between the control icons.

  I think that doing it this way would be to minimize the necessary coding is what I guess you need the new block of part blank icon "repetitive".
  Letter O is the white block the other letter first lefter control icon.
  Example: S-A-G-O-O-O-O-O-O-D-T-O-O-O-O-O-C-V-R
  see how the letters of control are now spaced with empty "O" between the two?
  Now, when I'm looking at the security related control icons on the left I have not D, T, C, V, R distract me from S, A, G.

  enough said
  frugal

  In the old days, there were separators and flexible spaces (used to separate the icons aligned to the right and left, not sure about centering), but Firefox 29 and above do not have those.

  Users who need those back could now try the customizer of UI multi-purpose Classic theme restaurant owner (https://addons.mozilla.org/firefox/ad.../classicthemerestorer/). It might be overkill, however.

  To submit suggestions of functionality that you can use either:

  • Firefox Help menu > submit your comments
  • https://input.Mozilla.org/feedback

  This forum is not well suited to this function.