Frames with scroll IOS 6 and 7

Similar Questions

• Connecting the frames with scroll

  

  I've created a scenario planner of the wall as shown above. The month and the content below are in a floating frame that scrolls back and forth. The problem I have is that when I scroll down, I lose the months. So, I wanted to know if there is a way to connect the 2 frames with scroll separated? Really it pasted it and am sure that's not possible, so thought I would ask experts.

  Thank you very much

  Steve

  I'm sorry but I don't have time for a long answer. If you read my post above, once again, you will see that you need create two moving images.

  1. just below the month set to vertical content.

  2. one that contains the first one grouped with the months set horizontally.

  Try it and tell us.

• Typeface is more heavy/more bold inside frames with scroll

  Text inside frames with scroll appears heavier on the ipad.

  Font is identical in InDesign DPS, obviously.

  See picture attached. Can be a little difficult to tell the difference with the screenshot.

  I put the text in the position box, top left. Using the commands "Cut" and "Paste inside" to create the scroll frame.

  In addition, I have an item multi-state of two States (box with bland gradient feathering), set to auto play slide show, at the bottom of the moving image.

  Both frame and a slide show with scrolling are on vector.

  

  Any help/advice appreciated - thank you!

  Bruce

  Thanks Bob!

  Knew that there must be a simple answer to this (accidentally built with older V20 folio).

• With the help of buttons in frames with scroll

  Hi, I'm new to Flash and I encountered a problem, I have just resolution of the Cant.

  I have a floating frame and the contents of this frame contains various buttons.

  The user clicks on a button and a new button will appear with information on this subject. At this point, I want to prevent the user to scroll the image.

  I understand the scrollDrag = false; command, but I do not know how to approach the scrollable frame of in the framework itself.

  If I had a framework floating in scroll (called frameb for example), it would be easy to address the fair frameb.scrollFrag = false;

  But I do not know how to reference the framework, I'm (or above it).

  Also, I can get the buttons on the main stage to interact with the floating framework, but can not work, how do I get the buttons in the framework to interact with the main stage.

  Here is a code to get an idea:

  This piece of code is on the actions of the main stage (stage one). It controls a button, that once pressed hides the book on Slide1925 buttons:

  BooksOff.addEventListener (MouseEvent.CLICK, fl_ClickToHide);

  function fl_ClickToHide(event:MouseEvent):void

  {

  Slide1925.pulp.visible = false;

  Slide1925.buck.visible = false;

  Slide1925.comics.visible = false;

  Slide1925.GoldenAge.visible = false;

  Slide1925.Orwell.visible = false;

  BooksOff.visible = false;

  BooksOn.visible = true;

  }

  That works fine, but when I'm coding inside of Slide1925 (like a symbol definition) how would I code to change a button on the main stage?

  Also, how can I program a button on the contents of the scroll pane which some will be the scroll pane?

  Sorry if I didn't explained this very well. Any help would be appreciated

  There are a variety of ways to address the issue.  It would be to have all the code in one place, as the main scenario and target all content from there, whatever in even within the frame of scrolling.

  Another way to approach it would be to use 'this' to target the current timeline and "parent" to target the object containing.

  Still another way is to have the functions that relate to the control of the parent object in the parent timeline and assign event listeners to the internal objects, such as internal objects simply send an event.  The auditor assigned to the event calls the function that lives in the parent timeline.  This works well for situations where the blade is a responsible external file that must be run on its own.

• Buttons inside frames with scroll

  I have a series of photographs which act as buttons that go to a page number. In an article, I've grouped these buttons and put them inside a floating frame. They work very well.

  Now, in another article (both of these items are part of the same FOLIO) these buttons just go to WHO. The MSOs have pan and zoom enabled (many current interactivity). I have cut and paste these buttons inside of a framework and made scroll, but the buttons are non-functional. Why the buttons functional within a framework and non-functional in another?

  There is a problem with buttons now. You can try to rename the buttons with all lowercase letters and without spaces or wait for the fix.

  Bob

• Help: Problem with scrolling my html and objects they keep practicing on my main menu

  Basically whenever I have put an html element in my site of Muse or any other object that I encounter a problem when scrolling downwards beyond this object in the preview. I have a menu bar horizontally located on the top of my site and whenever I scroll html elements and objects

  cut through my menu. Is it possible to fix this? -J' tried pinning of items but may not know. Any help would be greatly appreciated.

  Thank you

  So, you have a Menu pin in the master page but are bunk by page objects when you scroll down? If this is the case, select the Menu in the Master, right-click on it and move to master in the foreground.

  Thank you

  Vinayak

• DPS and frame with scrolling text

  Having a problem with the rendering of text inside a floating frame, it seems to be slightly cut off at the top. Seems to be a new question, is there a solution to the outside while adding a return before the first line of text?

  Thank you.

  

  Add an insert at the top and at the bottom of the text block.

• Frames with scroll w/Custom Frames

  I have a question about scrolling images.

  I have a blue rectangle as the background. I have an empty circle placed on the frame. I then create a yellow rectangle that is larger than the circle. I cut and paste the yellow rectangle in the circle and make my adjustments in the Panel inlays of Folio. Everything seems good. But when I saw, whether on the desktop or in my iPad, the setting circle is essentially nothing more than a square. It loses its curves. The desired effect would be down the yellow rectangle and do fill the circle. A floating framework can have straight edges?

  That's what it looks like in InDesign... the desired effect.

  

  That's what it looks like the Office Viewer and the iPad:

  

  Am I missing something or is this a limit? Thanks for your help.

  Content drop-down cannot be a rectangle. That said, you can hide it with a circle by converting it to a MSO set to auto play once and stop on the last image.

• Frames with scroll cancelled by video on the page

  I had wired a framework floating (tab) at the bottom of my page. Tested and everything works fab. I added a layer above this area and dropped several video clips in the layout. These clips are part of the content of the main page.

  As soon as I did, the container and the scrollable content place in this container is not made when the file is published/tested. It fails on the desktop and iPad Viewer.

  If I hide the layers contain video clips, the contents of the scroll frame returns and works very well. Is this a known problem and even video to be present on the same kills page content drop-down?

  New pictures floating along side, video content and I have not tried the myriad of hacks to make it work. You want to start with the obvious questions... it should work?

  Thank you

  Steve

  UPDATE:

  Correction of the problem. Think that I followed it it down to the fact that two containers of scrolling have been appointed to the same thing. So I've changed that. I can speculate only that was the issue, but we noticed that a link has not properly displayed in a scrolling box, and not the other. He actually traded stand published.

  We have rebuilt the two frameworks scrollables on 1 page, and then that of the multi - state. And it seems to work fine now.

  Phew, what's wrong with the head!

• Firefox does not start .oam file with scrolling parallax effect and if y > 740

  Hello!

  I try to explane my problem. If I place a parallax scrolling page of a lively .oam file, the .oam file does not start (as in firefox!) if the file is higher than y = 740 and if the animation with a scrolling parallax effect.

  Maybe just visit this site, you can see the problem. Please look with firefox!

  http://OAM-test.BusinessCatalyst.com/index.html

  I placed three times exactly the same oam-file with the same scrolling Parallax effects, but with different positions only y

  in safari and IE, no problem. but the third CAO does not start in firefox.

  any suggestion?

  by the way... Why firefox cannot load fonts in the oam file?

  Thank you very much in advance for any help. really need a solution as soon as possible. If there is no way to do it with oam-file perhaps another format without flash (gif)?

  Kind regards

  Ivo

  To work around the problem, you can configure initial field scroll to 1, it works with the third file oam.

  Thank you

  Sanjit

• Feature request: Focus on frames with scroll

  I find it very frustrating that the new software does not offer the same user-friendly experience when it comes to content drop-down. Whenever I try to scroll the contents in a floating framework, the first reaction (to the response of software) is to scroll the page, instead of the contents of the frame. Can you guys (engineers Adobe) detect content drop-down is present and switch the focus to the scrollable content?  content will be missed if the content does not automatically scroll easily.

  The way it works now, it seems when you go to a scrollable content frame, you must first touch to activate it, then scroll very gently so that you do not turn the page. Why it does not work like classic DPS?  Is it written in a different way?

  Thank you

  Tommy

  It is a bug, it is fixed in release out next week.

  Neil

• Several tabs using frames with scroll

  I am creating the effect of tabs in my DPS document with two or more tabs sliding in from the right side of the screen. I used the floating framework that works for one tab. When I place several tabs only tab at the top of the stacking order can be selected. I saw in a publication of DPS so I know its possible but I can't understand what I'm doing wrong.

  Help!

  

  If you ride scrollables contained frames, only the front will work. If you have seen this fact elsewhere, I suggest that they might have reached with some clever dragging the object HTML/CSS/JS in a superposition of single web.

• How to make a very original frame with the list comment and attachment?

  How can I make an original frame-like list of comment?

  I use Windows XP and Adobe Acrobat 9 Pro and Acrobat 9 SDK.

  I want to do a new plug-in that use a new image.

  The new framework is looking like list of comment and attachment.

  I want to show my original list and entry form to the framework.

  It is close to the comment list frame, but I want to see the original list.

  In addition, I would like to add new top to button Navigation button panel reviews.

  Can I get any help?

  There is no support in the SDK to add your own panels.

  There is no support to change existing panels.

• Frames with scroll viewer Android

  We often use frameworks scrollables in folios. Is there a chance the native android viewer supports vector images scrolling in the near future?

  Well Yes, soon. We try very hard to do, but there are some things on Android that prevent you from free us. We are now working on these issues.

  Neil

• How to move the central part of the screen as with scrolling

  Hello

  I have a requirement as my screeen is divided into 3 parts. (bottom) tail part 1) header (top) 2) Bday part (center) 3).

  I need to scroll the only part of the body of the screen. my part of header, tail should not scroll they should appear on the screen always in scrlling.

  If anyone has the code examples. Kindly help me.

  Rarards,

  Naveen

  "Life is short. Like all. Don't hate anyone. »

  Screen of the style will be no vertical scrolling

  For a part of the header, you can use with no scrolling vertical field Manager and override sublayout method

  protected void sublayout (int maxWidth, maxHeight int)
  {
  maxHeight = 10; height of the header potion
  maxWidth = Graphics.getScreenWidth ();
  Super.sublayout (maxWidth, maxHeight);
  setExtent (maxWidth, maxHeight);
  }

  and add this handler to the screen.

  For the part of the body, you can use field Vartical with scrolling style Manager and override the sublayout method

  and in the same way, you can use your height value that applies to scollable.

  For trailer hand use Manager of Vartical fields with no style of scrolling and override the method sublayout in the same way

  In my view, it will help you.