Freezes BlueScreen & system: Windows 7

Similar Questions

• Qosmio G40 - 11 d - every 2-3 minutes freeze the system

  Hardware: Computer laptop Toshiba Qosmio G40 - 11 d, bios 2008, OCZ Vertex 3 SSD
  Software: Windows 7 Professional 64-bit all updates from windows update.

  Problem:
  Every 2-3 minutes freeze the system - to stop the disc - LED disc controller turned on all the time.

  I did the following:
  1. I installed the drivers of intel (iata_cd.exe) of http://downloadmirror.intel.com/19607/a08/iata_cd.exe
  2. I ran the ocz.reg script:
  Windows Registry Editor Version 5.00

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort0]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort1]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort2]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort3]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort4]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  [HKEY_LOCAL_MACHINESYSTEMCurrentControlSetservicesi aStorParametersPort5]
  "LPM" = DWORD: 00000000
  "LPMDSTATE" = DWORD: 00000000
  "MISCONDUCT" = DWORD: 00000000

  The problem has been eliminated, but not quite. Now, the system stops only at idle speed... (aflter - 10-30 min)

  Let me know what I do next.

  Hey Buddy,

  Have you noticed the same behavior with preinstalled Toshiba or did it only with your new SSD HDD?

  You might have to update the firmware of the SSD. You should check the official website of OCZ if there is a newer version. If Yes, start the update firmware and then check again if it works or not.

• Skype freezes my system completely

  Hello. I've been struggling with this problem for some time. When I hit call on Skype it instantly freezes my system. Im sure it freezes the display driver only because I listen to the music while I talk on Skype, and when I discovered this problem when it freezes I could still hear the music in the background. The accident has phases. First of all, it freezes Skype then it freezes all other software (the cursor can still be moved but can't click on anything) and finally it freezes the cursor. During this time I can't do anything Im always have to do a forced reboot. Help, please!

  Try to uninstall the currently installed version of Skype and install the previous 6.14.0.104 version by using the download links provided here:

  http://community.Skype.com/T5/Windows-desktop-client/ASUS-USB2-0-webcam-not-recognized-by-Skype-6-18...

  Be sure to turn off the automatic updates:

  Tools-> Options-> Advanced-> automatic updates-> turn off automatic updates

• Desktop freezes in the Windows XP-based computer

  Original title: Freeze-up office...

  Well... I'm back. I have windows xp and office blocks. I thought that I had corrected it when I ran spybot search and destroy the program. He stopped freezing for about 24 hours. Now he's doing it again. Help

  Hello

  I suggest you follow these methods and see if they help.

  Method 1: Fix Windows system Windows-based computers slow performance issues

  http://support.Microsoft.com/mats/slow_windows_performance/

  Method 2:

  Step 1: R 're the computer in safe mode and check if the computer crashes or not.

  http://support.Microsoft.com/kb/315222

  If it works fine in safe mode, try to perform a clean boot in order to find the root cause.

  Step 2: Perform the clean boot using the suggestions mentioned in the link mentioned below.

  http://support.Microsoft.com/kb/310353

  NOTE: once you check functionality, follow the suggestions below steps to configure Windows to use a Normal startup state.

  Method 3: Run virus scans using the suggested below antivirus applications

  Microsoft security scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Malware removal tool: http://www.Microsoft.com/security/PC-Security/Malware-removal.aspx

  I hope this helps!

• Error message: can not find script file "c:\". WINDOWS 32\system\windows.db»

  Original title: error message: can not find script file "c:\". WINDOWS 32\system\windows.db» Help!

  After starting my Vista laptop, I get the error message: can not find script file "c:\". WINDOWS 32\system\windows.db» The mouse cursor freezes and I can't do anything on the PC. The PC will run in Safe Mode help!

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Spontaneous bluescreen on Windows 7 - HELP!

  I just got a new HPdv6 and started to download my files to Carbonite backup. Each time the computer restarts spontaneously. I downloaded the latest drivers and updates from the Microsoft Web site. This is the message I get when restarting after the blue screen and ask for a diagnosis. I don't know what is happening, or if someone can tell this information, but if you have any tips on what I can do to resolve, I'd be very grateful!

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7600.2.0.0.768.3

  Locale ID: 1033

  More information about the problem:

  BCCode:                                               50

  BCP1: FFFFF8A106014FEE

  BCP2: 0000000000000000

  BCP3: FFFFF80003087E90

  BCP4: 0000000000000005

  OS version: 6_1_7600

  Service Pack: 0_0

  Product:                                               768_1

  Files helping to describe the problem:

  C:\Windows\Minidump\040210-21075-01.dmp

  C:\Users\tjvarnadoe\AppData\Local\Temp\WER-34975-0.SysData.XML

  I can provide more information if necessary.

  Thank you!
  Laura

  Hello

  Have you recently added any hardware? Have you updated any drivers just before this started? (Check
  Panel configuration-updates of Windows to see if all drivers have been updated it there all the time it started)
  Main likely culprits are video driver, other great drivers, memory and antivirus/antispyware/security
  products could be at fault as well as reader questions.

  Would be a good idea to remove all power and remove and reinstall all memory cards and cables (on
  both ends) - not only tighten - really remove and reinstall. Of course, if a laptop is what you can do
  Reinstall the memory.

  Use the troubleshooter below and refer to the following message to drivers and memory when you get to
  These sections and then back to the resolution of the problems according to the needs.

  -------------------------------------------------------------------------------

  BCCode: 50 0 x 00000050

  Cause

  The BCCode 50 usually occurs after the installation of a faulty material or failure of
  hardware installation (usually associated with defective RAM, such as main memory, L2 RAM cache or video
  RAM).

  Another common cause is a defective system service installation.

  Antivirus software can also trigger this error, as can a corrupted NTFS volume.

  Solve the problem

  Solve a defective hardware problem: If the material has been added to the system recently, remove
  it to see if the error recurs. If the hardware failure existing, remove or replace the faulty component.
  You must run the diagnostics of material provided by the manufacturer of the system. For more information on these
  procedures, see the user guide for your computer.

  Fix a defective system service: Disable the service and confirm that this fixes the
  error. If so, contact the manufacturer of the system service on a possible update. If the error
  occurs when the system starts, restart your computer and press F8 at the menu character mode
  which displays the choice of operating system. In menu Advanced Options Windows resulting.
  Choose the last known good Configuration option. This option is most effective when it is only
  a driver or service is added to the time.
  
  A problem of antivirus software: disable the program and confirm that this fixes the
  error. If this is the case, contact the manufacturer of the program about a possible update.

  Fix a corrupted NTFS volume: Run Chkdsk /f /r to detect and repair disk errors.
  You must reboot the system before the start of the analysis of disk on a system partition. If the hard drive is
  SCSI, look for problems between the SCSI controller and the disk.

  Finally, check the system log in Event Viewer for additional error messages that might help
  identify the device or driver that generated the error. Disable the cache in memory of the BIOS
  could also resolve it.

  BCCode: 50 0 x 00000050<-- read="">
  * 1095.html? order = votes http://www.faultwire.com/solutions-fatal_error/page-fault-in-NONPAGED-Area-0x00000050-

  -------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.
  
  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  You can try a system restore to a point before the problem started when one exists.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates cbs.log Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista (also Windows 7) Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  Startup Options recovery or Windows 7 disk repair

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• After a crash of the system Windows, Thunderbird displays only about half of my gmail folders (labels).

  In my email account, I use a number of folders to organize my e-mail messages. After a crash of the system Windows, Thunderbird restarted, but now I see about half of my files and cannot access a large number of messages filed away. They always appear when I use my browser to access the gmail account, so the labels are still there. How can I repair damaged files thunderbird/arrangements? I use the current version (31.4.0)

  AHA! It already showed that I have subscribed to all of the folders, visible and missing, but after a combination of clicks (not sure what sequence of refreshment and subscribe and OK), they are all back.

  Thank you! Very useful.

• Hello! Prompt, please, what Firefox versions can be on the old system Windows NT4, thank you.

  Hello!
  Prompt, please, what Firefox versions can be on the old system Windows NT4, thank you.

  Firefox 2.0.0.20 is the last ever version of Firefox for Win98 / SE / ME / NT4.
  Download here:
  FTP://FTP.Mozilla.org/pub/Firefox/rel.../en-us/

• What is the HP Digital Imaging Monitor? Apply to my operating system, Windows 7?

  What is the HP Digital Imaging Monitor? Apply to my operating system, Windows 7? I want to remove the icon from the task bar (toolbar in the lower right corner of the screen) that I never use it.

  Picardjc wrote that "Digital imaging monitor is part of the HP software that communicates with your HP printer. This program allows to read the inklevels, get an out of paper message, scan from the device to the computer and so on. It is not necessary, but it will restrict the use of printers if you delete. "Understood. But for my printer HP Officejet Pro 8000 A809a, what is the purpose of having the digital imaging monitor icon in the taskbar Windows7 sp1 of the Notification area (aka system tray)? My A809a is NOT an all-in-one that includes a scanner; It is simply a very good printer. When I start to print something, if you need ink or paper, that information is displayed on the screen of my computer. So I ask again: why is the icon of monitor digital imaging on the taskbar? I clicked on at the time of this icon (I not print anything, but as usual, the printer is turned on), and nothing happened. R.N. (Roger) Folsom _ P.S. below I'll post some other discussions (with links to their locations) of the digital imaging monitor, I discovered before finding this site on which I am writing. There are a variety of opinions on what makes the digital imaging monitor. HP Digital Imaging Monitor is for HP director system tray access. This is necessary if you want to use the buttons of all-in-one on a HP printer all in one to scan documents or transfer photos from a camera manually. Closing the icon monitor HP digital imaging in the Windows system tray can cause the HP all-in-one to lose part of its scanning features and not the connection error message. In this case, you can restore all functionality by restarting the computer or by starting the HP digital imaging monitor. SOURCE: Yahoo http://answers.yahoo.com/question/index?qid=20080115093754AAlajpq - Re: REMOVE HP Digital Imaging Monitor of Systray? [Edited] 03/08/2011 14:05 - edited? 03/08/2011 14:08 Yes, it is safe to remove. In my view, it is usually in the program group under start / all programs / startup. Simply navigate under the Start button, right-click on it and delete! If it is not there, then remove it from the registry: run regedit and go to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run and delete it from the list in the right pane. If she is not there, then try hkey_current_user\\software\\microsoft\\windows\\currentversion\\run it's better than using msconfig and uncheck it. In my opinion, msconfig must always be set to Normal startup. Your printer will always print without that annoying obstructive utility called Digital Imaging Monitor. Ciao! Casey Henderson, MCP SOURCE: http://h30434.www3.hp.com/t5/Web-Printing-Software/REMOVING-HP-Digital-Imaging-Monitor-from-Systray/td-p/253515

• "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found

  Hello

  Im having a problem. I write a program in Visual studio 2008 c# for Windows CE language in a machine of liliput.

  When I run the program in windows 7, I have no problem, but when I try to run my program in Windows CE I get the following exception (the projecto for Windows CE was created to run in this operating system):

  MissingMethodException is unmanaged

  "Name of file or assembly ' System.Windows.Forms, Version = 2.0.0.0, Culture = neutral, PublicKeyToken = B77A5C561934E089", or one of its dependencies was not found.

  The references from my program are:

  mscorlib.dll (Version 2.0.0.0) (length versio 2.0.0.0) - this dll do not exist in the program for Windows 7, appeared when I created the project for windows CE

  NationalInstruments.Vision.dll (Version 11.0.35.102)

  NationInstruments.Vision.Common.dll (Version 11.0.35.102)

  System.dll (Version 2.0.0.0)

  System.Data.dll (Version 2.0.0.0)

  System.Deployment.dll (Version 2.0.0.0)

  (Version 2.0.0.0)-System.Drawing.dll

  System.Windows.Forms.dll (Version 2.0.0.0)

  System.XML.dll (Verision 2.0.0.0)

  Throughout this reference is the Version of the Runtime: v2.0.50727 (it is the versions of Windows CE of liliput machine can run?)

  Can someone help me? I don't know why I get this exception

  Thank you for your help

  Hello UH and thank you for your message.

  I'm sorry I don't really understand what you are doing, you develop applications with Visual Studio 2008 and then deploy it on Windows CE or use directly in windows THIS? (I ask that, because Visual Studio is not supported on Windows CE: http://www.microsoft.com/en-us/download/details.aspx?id=7940)

  In addition, what device OR do you use? What is the fat of your project?

  Thanks for the responses,

• My flash drive which was a backup of my system windows has been accidentally immersed in water. When it is dry can still be used without destroying my USB port?

  My flash drive which was a backup of my system windows has been accidentally immersed in water.  When it is dry can still be used without destroying my USB port?

  Hello

  Put it in a bag of rice for a few days or more. -seal the bag.

  If you remove all the moisture, it shouldn't affect the USB ports if nothing is
  possible. Usually it is not a problem if the moisture is removed.

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• last 10 automatic updates has not installed on my system; windows xp x 86 service

  last 10 automatic updates has not installed on my system; windows xp x 86 service

  jump,
  We could use a little more information.  What updates fail and the error codes are, to start.
  However you can check these links because they have some general troubleshooting steps that may help you.

  Reset the Windows Update components

  Solve Windows Update installation issues

  Troubleshooting Windows Update: offered on several occasions to update

  Last Windows Update Agent

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I want to upgrade my system windows xp sp2 to windows 8.

  Original title: upgrading system.

  I want to upgrade my system windows xp sp2 to windows 8. my system configuration is as follows...

  Udo of Intel core 2
  E4500 @ 2.2 ghz
  2 GB of ram
  graphic: Intel 82852/82855 GM/GM

  is it work? for this?

  First of all, check here if your system is compatible:

  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-from-Windows-Vista-XP-tutorial

  Second, consult the website of your computer manufacturer to see if they have the necessary drivers for your system to work with Windows 8. It is not likely.

• Which files must be in %System%\Windows\PCHealth\helpctr\binaries\ here?

  Hello

  Good bit of info to use.

  Dell inspiron 6400
  Windows XP sp3
  150 GB HARD drive
  1 GB of RAM
  Intel processor t2400 @1. 84 GHz

  1.
  Now, my last question is that I could not run the msconfig for some reason any and someone told me to insert my windows xp disc and go to cmd and type sfc/scannow, but I lost my XP disc. Is there a way to download all the missing files Microsoft?. Except that when I tried to install msconfig it wouldn't let me it says access denied, because I am the admin I don't know why he did it. I have only a single file in this folder %System%\Windows\PCHealth\helpctr\binaries\ now I just checked it again after having tried sfc/scannow without disc and some files are returned...

  What is the list of the files needed.

  2.
  At startup it says boot error then there another line that says c: Windows something, that is a little difficult to see exactly what it says as it also loads quite fast.

  Hello

  1. what exactly is the problem you are experiencing on your computer?

  2. Why are you trying to scan SFC?

  3. what happens when you try to run msconfig?

  4. how you try to install msconfing?

  5. What is the full error message are you getting Windows start?

  6. are you able to boot in safe mode?

  7. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  "Invalid Boot.ini" or "Windows did not start" error messages when you start your computer: http://support.microsoft.com/kb/330184

  More information: Advanced Troubleshooting for General startup problems in Windows XP: http://support.microsoft.com/kb/308041

  Hope this information is useful.

• 2 operating systems: Windows 7 makes all folders and files on another partition (Windows XP) read-only! What now?

  2 operating systems: Windows XP and Windows 7

  Windows 7 is to make all the folders and files on another partition (Windows XP) read-only!

  Once, I opened a file from "My Documents" from XP in Windows 7.

  But when I Wen back to Windows XP.

  But while starting up, I got a lot of error messages:

  Access denied!

  When I am gone to Windows 7 yet once I noticed that all records on the other partition where unalterable.

  But after I tried to void that lookt again to see if she had cancelled it.

  But he remains unalterable reports!

  I have lookt on Google and Bing, but could not find someone with the same problem!

  Now it works!

  I used these 10 steps to solve the problem!

  10 STEPS TO GET FULL CONTROL ON a FILE / FOLDER / PARTITION (Microsoft Windows Xp):

  1. press F8

  2. select Safe Mode

  3. log in with an administrator account

  3. go into the properties of the folder / partition / file that you cannot access

  4. Select security and then advanced

  5. in 'owners' define yourself as an owner (if it is not defined)

  6. click on 'Ok '.

  7 configure yourself: make sure you clickt on the box "Total control" (allow)

  8. click 'OK' and then 'apply '.

  9 reboot

  10. the test (if it still does not, try again a few times)

  ____________________________________________________________________________

  And then it worked!