Freezing or IP security on the change of the IP address

Similar Questions

• Computer crashes when executing the analysis of security at the following address: C:\ProgramFiles(x86) \Photo-Service\optionallMobules\allFonts.swf

  Original title: C:\ProgramFiles(x86) \Photo-Service\optionallMobules\allFonts.swf

  When I do a scan of security whenever the reached scan as this point, the computer freezes and thoughts?

  The point is C:\ProgramFiles(x86) \Photo-Service\optionallMobules\allFonts.swf

  Hello

  
  NOTE: Before performing the following steps, you need to check if the files mentioned in the site are related to evaluation of PhotoShop edition.
  To resolve this problem, we must work in the mode of WinRE (Windows Recovery Environment).
  See the following link for more information about system recovery options.
  
  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7
  See the section: to open the Options menu system recovery on your computer to enter System Recovery Options
  Under the recovery tool, choose command line.
  
  (a) choose the option for command line.
  (b) type Notepad and press enter.
  (c) a Notepad opens, click file , and click Open.
  (d) click on computer.
  (e) go to the location where the file resides. (C:\ProgramFiles(x86)\Photo-Service\optionallMobules\allFonts.swf)
  (f) delete the folder.
  
  Then, restart the computer and perform analysis. Check if it helps.

• How to change the security of the account after I lost the answers to Security Questions?

  While trying to access iCloud, asked me to answer 2 Questions of security.  I lost the exact answer and repeatedly typed the wrong answers.  How can I change my Security Questions?  Also, I forgot to add an emergency email.

  In this case, you will need to contact the Apple ID account security team

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• can someone change my WZC and the setting of security through the internet?

  can someone change my WZC and the setting of security through the internet? I was watching a video on youtube when my stop comp. and restarted on its own. start and my security program was not able to start, had to uninstall and reinstall to turn back. He told me has encountered a problem and that you must close the program and the program would not close. It comes in a loop. Security found nothing. WZC to capture multiple signals, but now I can't pick up a. right extremist to the modem.

  It seems that if you picked up some malware.  What is the full error message on "antimalware executable?

  I would like to cancel the restoration ago 2 months... it's really too long to rely on system restore.  Too many things have been added in the meantime who is affected negatively by the restoration.

  It is very difficult to say anything from the limited information you provided, but I suggest starting by download, install, update and run a full scan with MalwareBytes Anti-Malware.

  In your answer, in addition to providing the full text of the error messages, provide all of the following:

  What version of Windows, including service pack, do you have?
  What antivirus application do you use?  Is up to date? Have you ever let her subscription lapse?
  What other antimalware applications do you have?
  What is the brand and model of your computer?
  What is the brand and model of your wireless router?

• security in the ADEP changes

  Maybe someone can give me the right advice. Looks like with ADEP safety on a turnkey installation is more than before enhaned.

  When you skipdurcing the configuration of the Manager of the question as what is the host name, and leave the standard 'localhost', it gets funny if you try to reach the server after the IP address changes or the name of der FQN.

  Simple, you probably need to change the referer allow but either way I don't have to work. To get access via remote control on my server, I deleted the white list, the proposed change of the parameters by adding the new IP address and 0 http and https port has not helped. Also, after restarting of services document I couldn't reach http / / myhost:8080 / /AdminUI or http://myip:8080 / workspace. only 'localhost', I used the installation gives me access.

  Has anyone good advice how to fix this?

  Thank you

  Dieter

  This is probably the new CSRF filter to work.  Please see this:

  http://blogs.Adobe.com/ADEP/2011/08/new-in-ADEP-document-services-CSRF-filter.html

• I bought a new laptop with Windows 7 installed. Whenever I restart it, it has installed updates which can take up to an hour or freezes. You can ignore the automatic updates of Windows 7?

  I bought a new laptop with Windows 7 installed.  Whenever I restart it, it has installed updates which can take up to an hour or freezes.  You can ignore the automatic updates of Windows 7?

  You can turn off the automatic updates, Yes, but doing so would leave your computer at risk. Simply put with him: after another reboot or two, you will be fully patched AND fix!

  Install the Windows updates:
  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Update your computer:
  http://Windows.Microsoft.com/en-us/Windows7/updating-your-computer

  Understand the Windows automatic update:
  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-automatic-updating

  Updates: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/updates-frequently-asked-questions

  Change how Windows installs or notifies you of updates:
  http://Windows.Microsoft.com/en-us/Windows7/change-how-Windows-installs-or-notifies-you-about-updates ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• my freezer scandisk to 0% at the start of the computer. someone please tell me how to solve this problem

  my freezer scandisk to 0% at the start of the computer. someone please tell me how to solve this problem, and for this reason, I can't use my computer for other things as well. It is now very slow and do not file load. as adobe flashplayer doesn't load on google crome more please help me with this. I have windows xp sp2

  Yes, install xp3, the patch is only for hp AND amd pc, install from the link and then navigate to the microsoft updates and a priority scan, install, then do a custom scan and install rootkit updates, it will be a long process that you are behind in security updates , \\

  clean the pc then do the following:

  Shenan Stanley tips: will probably want to clean this machine...

   

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  ·                                 MalwareBytes (FREE)

  ·                                 SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/index.html

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Cleaning the components of update on your Windows XP computer

  While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you * NOT * use the aggressive version):
  How to reset the Windows Update components?

  Reset.

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

• ProDesk 600 G1 BIOS configuration of the TPM secure through the BIOS Configuration utility

  We have a range of devices, computers HP desktop and laptops in our environment.  Devices are all running Windows 7 64 bit and should have Bitlocker enabled, but we found that some were not encrypted.  So I am trying to set up a remote BIOS and Bitlocker config activate software that we can get out via SCCM and then embed in a task sequence image for new machines.

  I use the Bios HP Configuration utility to check a BIOS password is set and then activate the TPM chip.  I took a BIOS config output of each of our models and created a settings file that has all of the TPM associated parameters of all models.

  At the moment I run Setup BIOS utility manually for testing.  On all models I tried that works very well, except for the 600 ProDesk G1 SFF.

  When I run the utility on the ProDesk 600 G1 MFS, it says that I have managed to update the settings, and when I check the BIOS, the TPM secure has been unhidden and the TPM Management was given to the operating system (two settings I change), but the TPM itself remains hidden.

  It's the release of the BIOS configuration utility (it uses the 2.60.13.1 version, which uses plaintext passwords.  I also tried with the 3.0.13.1 later version that uses password files - same result)

  C:\ > BiosConfigUtility64.exe /cspwd: "password" set: "TPM_Config.REPSET"
  
  < BIOSCONFIG Version = "2.60.13.1" Computername = 'HP600G1' Date = "24/07/2014" Time = "13:01:37 ' UTC '1' = >"
  
  < SETTING changeStatus = "pass" name = "Embedded Security Device" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [hidden device]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [device]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "Enable security on the next boot" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SETTING changeStatus = "pass" name = "The BONES of on-board safety management" reason = "' returnCode '0' = >"
  
          < OLDVALUE > <! [CDATA [disable]] > < / OLDVALUE >
  
          < NEWVALUE > <! [CDATA [enable]] > < / NEWVALUE >
  
  < / SETTING >
  
  < SUCCESS msg = "Successfully set BIOS config." / >
  
  < information msg = 'BCU return the value' real '0' = translated = '0' / >
  
  < / BIOSCONFIG >
  
  C:\ >

  And after a reboot (where it should activate the TPM), BIOS shows as disabled built-in safety device (see attachment for the image).

  I have tried everything I can think of to get this to activate, including:

  • Different versions of the BIOS configuration utility
  
  
  • Remove the password from the BIOS and the application in the same order as the parameters
  
  
  • Different passwords
  
  
  • Reboot and allowing the machine to start completely to Windows before checking if the setting took effect

  I also tried to add the utility and the commands for an SCCM package and it works directly and as part of a sequence of tasks to see if that makes a difference, but nothing I've done has activated the TPM module.

  I know that the TPM module works, as you can turn it on manually and then Bitlocker can be applied to the machine, but with thousands of devices in our environment, I need to get this job without the need for manual intervention.

  Has anyone else had this problem and found a solution?  Or has someone at - he managed to activate the TPM on the SFF of 600 ProDesk G1 using the BIOS Setup utility?  Any ideas / suggestions would be very appreciated!

  P.S. This thread was moved from the company PC - Compaq, Elite, Pro for HP PC Client management. -Hp moderator of the Forum

  This problem has now been resolved by HP.
  
  They provided a replacement motherboard for the test machine I was using that solved this problem. I don't know what kind of motherboard failure could prevent the activation via the script TMP chip but not prevent activation through the BIOS menu, but as a replacement solved the problem, then it must be a hardware failure.

• How the hell can I change the reachable on the email address under my Apple ID?

  appearing e-mail addresses are old and no longer maintained - how to remove them. I've been to Apple ID and edit, but it won't let me change the address here

  What type of e-mail address it, primary, alternate, save? The email addresses that you can change the account will appear on http://appleid.apple.com (emergency email address is changed in answering the questions of the account through the Security section)

  Address e-mail account: on your Apple ID - Apple Support email addresses

• How can a member of the family without an account standard security for the family... I have windows 7

  I use to have security for the family, but it has just stopped working.  I need for a family member who does not have a standard account.  I downloaded Essentials.

  Hi jaguar1234,

  The latest version of the parental control now uses the standard user accounts (logon Windows) as a child in the safety of the family. If you need to know about adding a user to the Windows login with standard privileges, please see this link.

  Once you have finished creating a standard user account and that you want to manage under parental control, then follow these steps:

  1. run the parental control on a Windows account with administrator privileges. If this is your first time running the parental control, you need to sign in using your Microsoft Account.

  2. after login, select the standard Windows account that you want to monitor as a child by checking the box to the right of the name of the account, and then click Next after.

  3 on the right, you will see members parental control with a list of drop down option. Click the menu drop-down, and then select Add standard account name.

  4. click on record. Wait until the installation is done.

  5. Once done, you should see the name of the account under Windows monitored accounts. To manage the account and setup of filters and restrictions, to connect on https://familysafety.microsoft.com, look for the child account name, and then click change settings.

  If you are having trouble configuring your parental control, do not hesitate to reply to this post.

  Thank you.

• How security are the links posted in the answers to the questions?

  Earlier, I asked why the SP3 update to my SP2, explains a backup should be performed.  I was also asked why it was not conducted earlier. I'm still on SP2.  I don't want to lose the programs and software on my computer.  A backup really protect software as Front page?  With my answers provided the links and explanations, of course, I have not clicked.  People put these links in there for my benefit, but I still understand you're not not to click.  What I have to do is to try them on a computer that can take a bullet.

  While you're wise to be cautious about possible bad things that can happen to a PC, you must realize that the mere fact of being online (for example, only the reading e-mail) will ALWAYS have its risks.

  The irony is that because Windows has a large number of security vulnerabilities, the chances that your PC has been compromised (as well as your personal identity and financial information) is VERY high because you do not have a connected system! A system of Windows XP SP2 is VERY precarious. In fact, a number of people would like to recommend that you perform a clean install because of this.
  For links, you can reduce the risk of passing the mouse over the link to verify that it does not change. In other words, if you receive an email from 'phishing' of what you THINK is your credit/bank card company (let's say it's Chase) and the link LOOKS good, the mouse over it and see if decides to link to a strange name that is not familiar.
  But if a MS MVP as PA porter provides a link, I don't know that it will be safe.
  Here are mousing over the examples:
  This one REALLY goes to Google (you can predict that it will be by positioning the mouse on it and checking):
  http://www.Google.com
  It does not WORK:
  http://www.Google.com
  (Note that it will STRIVE to go to google.cxw3q9, which does not exist!)
  You're foolish to not be backing up your system! A reliable backup of the system WHOLE (by creating a clone or image of the ENTIRE disk) is the only way to protect your system, including ALL the programs installed on it! I prefer the image of the hard drive. Acronis True Image works fine. There are other programs, too, such as Paragon and Macrium Reflect, that to do this.

• Impossible to acquire the IP address on a secure radio network.

  I have a WRT54GS which we got the network for more than a year. (Encryption WPA setting). This Christmas we have children one of these mini-notebooks, but when we went to put it on our wireless network could not acquire the IP address. Cable using ethernet to connect directly to the router is allowed to get online with the active LAN setting.

  In order to get finally the new laptop connected via the wireless, it had no secure our system. Now, we need to understand why the laptop could not acquire the IP address so that we can solve the problem and to set our network again. Any ideas/suggestions on the subject would be appreciated.

  Change the Chanel wireless router to 11-2, 462 Ghz... Under wireless settings advanced... Change the tag to 50 interval, change the Fragmentation threshold to 2304, change the RTS threshold to 2304 and click on save settings... and try to connect to the network again.

• get security bulletins when changed e-mail address

  After changing my e-mail address, I get no longer regular monthly security bulletins. Verification of validity in my Inbox is not possible, since I get no notice on my current address. E-mail address is removed from the privacy *.

  Hello

  Try to sing once more for alerts newsletters using the link below, because you have changed your email ID.

  https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=11&ct=1267461855&rver=6.0.5276.0&wp=MCMBI&wreply=https%3a%2f%2fprofile.microsoft.com%2fRegsysProfileCenter%2fSubCntDefault.aspx%3fLCID%3d1033%26SIC%3d1NewsLetterSub&lc=1033&cb=LCID%3d1033%26WizID%3d00000000-0000-0000-0000-000000000000%26brand%3dmicrosoft%26subbrand%3dprofile%2bcenter&id=74335&cbid=50861

  Let us know if this helps

  Concerning
  Anthony.

• Security for the family of the Blocked Sites

  I just looked through security to the family a few days ago.  I have blocked some sites and my child could not see, but now I see that it can display them.  What should I do to keep them blocked?  It can not access my account, the filter is light and the sites are still blocked in the family safety website.  We have windows 7.  Thanks in advance for your help.

  Hello

  Thanks for posting your query on the Microsoft Communities.

  I'm sorry to know that you have problems with the blocking of Web sites using parental controls. Let me try and help you with this question.

  One possible way to solve this problem is to refresh the web filtering settings for your child by turning and then by following the steps below:

  1. connect to https://fss.live.com using your Parent account.
  2. click under the user name of your child.
  3. request for Web filtering, check the Disable web content filtering , and then Save.
  4 tick to enable web filtering you can adjust the slider to different settings.
  5. Save.

  After that, refresh the client of parental control to update changes made via the Family Safety website. To update the client, click the icon with the arrow on the upper right.

  To update the family safety filter, follow these steps:

  http://Windows.Microsoft.com/en-us/Windows-Live/Family-Safety-filter-FAQ

  I hope this helps. If you have any other questions, we will be happy to help you.

• Security of the port on a SF300 problem

  Hello world

  We recently bought a new SF300, the main goal was to using the security of the port as a CNA.

  I expect to be able to define a list of allowed MAC addresses, but unfortunately, it is not the case.

  I used the "Classic Lock" port security.

  knowing that I can't have all the computers being connected at the same time (for cause of displacement), when a person to be allowed is here I am forced to disable security so that the switch can learn its MAC address.

  the problem is that when I do, the MAC addresses that are already learned are forgotten if disconnected from the LAN and when someone changes his position in the local network, it is blocked from access to the network.

  I remember that my goal is to give access to the network based on the MAC address or the domain name (allow computers part of OurDoamin.com).

  N.B: In our architecture, each room has a small switch and these switches are connected "central one" which is the Cisco SF300.

  Thank you.

  Dynamic arp for this inspection. Specify a mac IP on the trust list, the client connection to the "secure" ports (meaning subject to inspection of the arp) then do 'secure' interconnection ports (that is, not subject to inspection arp).

  I'll tell you one thing... before playing with DAI, make sure to enter at least the host you are using, otherwise you will be hose to the top of this switch.

  -Tom
  Please mark replied messages useful