frequent blue screen error...

Similar Questions

• I often get frequent blue screens on internet sites. Blue screen too fast for me to record specific error message. How can I put an end to the blue screen to get the error message?

  frequent blue screens often to internet sites.  Blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  en blue screen too fast for me to record specific error message.  How can I put an end to the blue screen to get the error message?

  If your computer is restarted when the BSOD appears, then you must change the by default for what to do in case of system error. It is easy to do, but takes a lot of mouse clicks to get there:

  Start | Control Panel | System | Advanced system settings (need for credentials for the administrator to spend here |) Advanced | Startup and recovery / settings.

  On this screen, uncheck the box under system failure that says automatically restart. The next time the BSOD appears, your computer will not do anything else until you press the reset button, so you'll have all the time you need to read and copy the error codes. Paste here, verbatim, and someone should be able to point in the right direction.

  ``````~~~~`````

  In the control panel choose reports on problems and Solutions (problem of type in the START search box), go to historical problem, right-click your error and choose check for the Solution. You can also examine the details.

  In administrative tools, choose the reliability and performance monitor and click on MonitoringTools then the reliability monitor (type reliability in research on Start). This list is a chart of the software installs, uninstalls, updated Windows and crashes by date. See if your plant has started to happen after you installed or uninstalled something.

  It may be useful to eliminate equipment defects

  Type of memory in the search box of start and choose Memory diagnosis

  In a command prompt (type command in the start search box then right click and choose Run as administrator) type

  CHKDSK c: /r

  If you have more than one drive replace C: with the other drive letters.

  Search for corrupted files by typing at the command prompt

  sfc/scannow

  You can clean boot troubleshooting http://support.microsoft.com/kb/331796

• Frequent blue screens various bluescreen errors

  frequent blue screens and had the virus; reinstalled by default and loaded MS security essentials; always have blue screens; the system indicated that it was a hardware problem (Dell E521 Deminsion # sub Vista Home Premium. A run basic diagnostic, no error is reported; has ran the diagnosis by focusing on the blue screen area got the error on SATA S/N 5QE2RBPR; long self-test error code 0f00:075 device D IDE failed; Read OFOO:0244 block 370264344 test data impossible to correct error or media is write protected. Check the test 0f00:1 A 44 #same block numer and error error message as previously. Trying to focus in this hardware problem may be. RobM

  Hello

  Use methods such as the SFC, CheckDisk, driver updates, and others in the resolution of the issues identified
  at this link as they will help solve or at least narrow down the questions. After that you can post the
  information of BlueScreenView and these other utilities, so we can offer more specific advice. Of
  check with a real store of the computer or the system manufacturer's support would be a good idea though
  I would try the possible solutions, you can first.

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  You can use BlueScreenView to stick the BSOD info in a message here.

  NOTICE - report HTML all THE ELEMENTS or right-click on a BSOD line and select the same. Then, copy and
  Paste the lines in a message here. Make sure and check the file name section. Also check the time
  in MyEventViewer for more information as possible.

  ===========================================================

  Check out these utilities to see if information may be collected:

  It is an excellent tool for displaying the blue screen error information

  -Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
  and displays information about all accidents of a table.
  http://www.NirSoft.NET/utils/blue_screen_view.html

  -------------

  MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
  time of the BSOD to provide more information about the possible cause - see TIP.

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
  Set it for a bit before and after the time of the BSOD.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------

  AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
  application goes down has occurred in your system. The information breaks down is extracted from the .wer
  the files created by the Windows Error Reporting (WER) of the operating system component of each
  time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
  text/html/csv/xml file.
  http://www.NirSoft.NET/utils/app_crash_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Blue screen error caused by display driver igfx

  Origin: the title display driver igfx

  My Toshiba Satellite L305-S5907 started suddenly to do all kinds of crazy stuff, the screen was all distorted and it flickered and then it would break.  Then I had received a message indicating that the screen was confronted with a display driver igfx problem and had been recovered.  This has happened about 5 times and I was trying to see if I could get some info on the help and support page, and then the screen went black.  Now my laptop won't open at all.  I pressed the button 0 and holding it down and then through this recovery process and it will get so far and then a blue screen error appears and says that he is arrested for not to damage my laptop.  It is as far as I can get and it won't let me on my computer to get to the control panel or to download updates.  How can I return to my laptop to download the updates?

  Hi Tempol,

  Since then, you receive a bluescree and unable to boot in normal mode, you can try to boot from the Windows Vista full version installation disc and perform a startup repair.

  If restarting fails, then try a startup to restore the system from the installation disc.

  For more information, you can consult the following articles:

  What are the system recovery options in Windows Vista?

  Startup Repair: frequently asked questions

  Hope this information is useful.

• Blue screen errors, hard disk crash and now the windows activation question

  These last six months, I had a problem of error frequent blue screen crash. Suddenly last month the drive crashed, hard my computer didn't load windows on several effors, finally the hard disk had to be changed. Reinstalled the operating system after copying the files of restoration for windows, now windows says is not a genuine copy. Now, today still crash blue screen error after from once again, he says that this window is not genuine. MT laptop is a sony vaio 3 years old and came with a preinstalled windows 7 licenses and the key that I use is one written behind the laptop on the microsoft certificate.

  He seems to have removed the incompatibility of CID at least.

  Please try activating suggestion of Andre now - the system is now simply say that it is out of time, require activation by telephone.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• blue screen error and the memory of dumping

  Dear all,

  Beyond 20 days before my knees worked well, with any problem.

  OS: win 7 home.

  recently I updated all the patches update.that time Windows first problem started in the MSE.

  Error: Session "Microsoft Security customer OOBE" stopped because of the following error: 0xC000000D

  Due to this blocking of the system frequently. some time system starts window in a few second, or after the windows login began with a few min.and then memory dump and the blocking of the system and blue sceen dump.

  while I removed the MSE and also checked, after that also are having problems.

  Help reslove the issue.

  Please find the shared memory dump

  https://SkyDrive.live.com/#CID=F1D72CACC8DEB263&ID=F1D72CACC8DEB263%21126

  As well as the problems of now some think like this as follows,

  A fatal hardware error occurred.

  Reported by component: Processor Core

  Source of the error: Machine Check Exception

  Error type: internal Timer error

  Processor ID: 4

  View details of this entry contains more information.

  Hi Er.Nirmal,

  You did changes to the computer before the show?

  I suggest you try the steps from the following link:

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

• Blue screen error/Kernel control failure

  Windows 8 32-bit... .blue screen... the system kernel verification failure...

  all 15 min or 10 min, it displays a blue screen saying system kernel check failure

  Sometimes it is said... .memory failure of management

  my head is bursting caused by the frequent BSOD...

  I tried everything...

  sfc/scannow

  Windows memory diagnostic tool

  Auditor of

  update the bios

  updated all drivers

  Please help me as soon as possible a complex and complete solution!

  shortly will download the minidump and memory.dmp file

  Kind regards.

  Faiz

  Original title: windows 8 32-bit... .blue screen... kernel system check failure... ur system will restart... Please help!

  Hello Paul,

   
  Welcome to the Microsoft Community Forum.
   

  Let me ask you,

  1. You did no particular change in the computer?
  2. What is the brand and model of the computer?

  Please, try the next method and check.

  Resolution of errors blue screen in Windows

  http://Windows.Microsoft.com/en-AU/Windows-8/resolve-Windows-blue-screen-errors

  Important: When running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk be lost.

  After back if still the problem persists. We will be happy to help you further.

  Thank you

• Designjet t125: designjet t125 blue screen error B332347C

  Hello.

  I was ask to get this error:

  When you feed the plotter that blue screen appears with this code: B332347C

  I can't find the service manual for this, if anyone can help me?

  HELO try this solution
  You need to replace hp designjet encrypted t520 chip on the motherboard inside the plotter
  You can buy it on ebay http://www.ebay.co.uk/itm/HP-Designjet-T520-Blue-Screen-Error-Solution-Encrypted-chip/282223353841

• Blue screen error on the Satellite A100 - 920 (PSAA9)

  Hello

  I got a blue screen error during use normal and after reboot, Windows suggested updated the BIOS, so I've updated with the latest version (5.10). The next day, I got another blue screen and reboot, Windows has suggested that I update my display drivers, I did (to Ver. 8.241)... I have an ATI Radeon X 1400 GPUS. After that, the computer crashed every time that it loaded windows, with a popup on services.exe telling me the computer shuts off in 60 seconds.

  I assumed that this was linked to the display driver, so I replaced the drivers with a version earlier than day (8.241 - 034065C). Once I did, it seemed to work and I could use the computer very well for a bit, even play games like GTA, but I'm starting to take again the blue screens, usually just at the opening of the files, etc. and not when you run graphical applications with a lot. The problem disappeared when I turn off my display drivers, but which is not really a solution.
  I disabled the reboot on the parameter of the error and it is information of the blue screen of death:
  STOP: 0X0000008E (0XC0000005, 0XEE6DF5E9, 0XBAD2F99C, 0X00000000)
  System32:huy32.sys - address EE6DF5E9 base at EE6DD000, Datestamp 45abe717

  Anyone have an idea how I can solve this problem, it makes me crazy!
  I downloaded the map Omega drivers, but am slow to install that I heard that they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without having to use third-party drivers myself.

  Hello

  One question: do you use Antivirus applications and you did update the Windows operating system?
  You said something about services.exe you indicating the computer turns off in 60 seconds.

  For me, this looks like a virus! I also google for system32:huy32.sys some people said it s a malware!
  I m not 100% sure, but maybe you have some virus you OS!

  Now to the question of pilot you: Yes, Toshiba recommend that you use a clean graphics drivers on the Toshiba site. The use of original graphics drivers on the Web site of graphics card manufacturer is not recommended.
  But I read a lot of thread on the omega drivers and many users using the drivers and they have no problems.

• Satellite A200 - blue screen error when you try to open HWSetup

  Hello

  I get a Windows blue screen error everytime I try to open HWSetup or access from Toshiba Flash card using the Fn key.

  Any ideas how to solve this problem?

  See you soon!

  Hello!

  Using Windows Vista?
  If so, you should try to update the Toshiba value added package and hardware configuration. The two you can find on the Toshiba site:

  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Blue screen error - recovery problem (STOP: 0 x 00008086)

  I am working on a Toshiba Satellite laptop and need to recover to original state. I have no recovery disks, however, I followed the Toshiba 'How' instructions (F8, and then select repair your computer), it displays the progress of Windows bar then goes to a black screen for a while and then I get a blue screen error (STOP: 0 x 00008086).

  Is there a way to get around this?

  N ° if drive HARD recovery cannot start on the regular basis there is no trick to make it work.

  To the factory settings, you need Toshiba DVD recovery.

• Get the blue screen error saying windows has shut down to prevent damage to this computer

  My sons computer is BLUE with a message saying that windows was arrested for not to damage your computer. And it is stuck on that screen. Do you know why windows shuts down his computer?

  * original title - my son computer is blue and a message indicating that windows has stopped to avoid damaging his computer. And he is not able to do anything. Do you know what it is? *

  Hello

  1. what operating system is installed on his computer?
  2 did you the hardware changes to his computer before the question?

  Perform the steps in the article and see if the problem is resolved or not.
   

  Resolve stop (blue screen) error in Windows 7

  Also check the event viewer for error logs

  Open event viewer

  What are the information contained in the logs of the event (Event Viewer)?

• Need solution for details of error below:-blue screen error BCCode 1000008e + BCP1:80000003 + BCP2:817855 A 8 + BCP3:8B9B9A54 + BCP4:00000000 + OS version: 6_0_6001

  get this problem in win 2 k 8 32-bit enterprose

  Need solution for the details of the error below: -.
  Blue screen error BCCode 1000008e + BCP1:80000003 + BCP2:817855 A 8 + BCP3:8B9B9A54 + BCP4:00000000 + OS version: 6_0_6001

  Hi SudhaArunachalam,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• I get the blue screen error - error - Stop 0X0000008E

  -Stop error 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000)

  Hi I get the blue screen error - error - Stop 0X0000008E (0xC00005, 0XC000005, 0X08244c8b, 0XBA50B58C, 0 X 00000) and cannot use the pc in safe mode. I have XP - OS. I really don't want to reformat the HARD drive and you want to avoid reinstalling as much as possible

  Hi aromaveda,

  ·         Have you made changes on the computer?

  Follow these methods.

  Method 1: Follow the steps in the article.

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Method 2: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is no conflict of software like clean boot helps you eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 3: Follow the steps in the article to check the drive for errors.

  How to perform disk error checking in Windows XP

  http://support.Microsoft.com/kb/315265

  Note: If bad sectors are found in the hard drive, then it could try to fix this particular sector. If you have any data on that, it can get lost.

• blue screen error page "0x0000007E (0 x 0000005, 0x806E794F, 0xF7A45C30.). 0xF7A4592c).

  I get this error since the 22 and I ran across the typical procedures already (clean the temporary files and updates to the bios, etc.).
  I still keep getting a blue screen error page saying "0x0000007E (0 x 0000005, 0x806E794F, 0xF7A45C30.). 0xF7A4592c).

  The minidump files show a SYSTEM_THREAD_EXCEPTION_NOT_HANDLED_M (1000007e) coherent don't stop error.with no third-party driver named as causing the crash.

  Here is a "Summary" of the accident:

  BUCKET_ID: 0x7E_nt! FsRtlRemovePerStreamContext+ 1

  Here's the "Stack_Text" which refers to the fltmgr.sys:

  STACK_TEXT:
  f7a4dcf4 804ed978 85fdba28 85e185cc 85fdba20 hal! ExAcquireFastMutex + 0xf
  f7a4dd08 f7458b6c e2fa9b30 85e18370 e2fa9b30 nt! FsRtlRemovePerStreamContext + 0x1e
  f7a4dd34 f745a0ba 85e18370 86873be8 85e254c8 fltmgr! FltpDeleteAllStreamListCtrls + 0 x 62
  f7a4dd50 f744c8f7 85e183f4 86873be8 00000008 fltmgr! FltpFreeVolume + 0xa4
  f7a4dd68 f745064e 85e254c8 00000008 8056485c fltmgr! FltpCleanupDeviceObject + 0x61
  f7a4dd7c 805387cb 86873be8 86dc2b30 00000000 fltmgr! FltpFastIoDetachDeviceWorker + 0x14
  f7a4ddac 805cffa8 86873be8 00000000 00000000 nt! ExpWorkerThread + 0xef
  f7a4dddc 8054615e 805386dc 00000000 00000001 nt! PspSystemThreadStartup + 0 x 34
  00000000 00000000 00000000 00000000 00000000 nt! KiThreadStartup + 0x16

  It is very similar to the error reported in the following link where "Drive Letter Access" seems to be the issue.

  http://Forum.sysinternals.com/BSOD-7E-Driver-Verifier-problems_topic18148_page1.html

  Since you also have Sonic Drive Letter Access installed you can try to uninstall this software and see if the problem resolves.