FRM-50027: mask format not valid for given data type.

Similar Questions

• Number format not valid in the data transfer Assistant

  I'm trying to download data from a CSV file in a table via the download data wizard. However, it always seems to fail on some lines with an error "invalid number format". Even if I stick one of these lines in the wizard, it still does not work. There is nothing wrong with the data, and I can do a regular insert Toad with no problems.
  
  The data are:
  28126238,101, RM, 29/01/2011
  
  The table looks like this:
  CREATE TABLE STR_PROD_UPLOAD
  (
  NUMBER OF PROD_CD,
  NUMBER OF STORE_CD
  CHARACTER VARCHAR2 (10 BYTE),
  DATE OF REPL_START_DT
  )
  
  It works very well on Toad:
  INSERT INTO STR_PROD_UPLOAD)
  STORE_CD,
  PROD_CD, line, repl_start_dt)
  VALUES (to_number('101'), to_number('28126238'), 'RM', to_date('1/29/2011','MM/DD/YYYY'));
  
  Anyone have any ideas on what might be wrong or how I can go about the matter of finding?
  
  FYI - evolution STORE_CD of a varchar2 and PROD_CD solves the problem, but I would like to know if it is possible to solve this problem for later use.
  
  Thx John

  Hi John,.

  For some reason, I get the same error. However with the download of the data, you can still provide you own number format in the case where the application could not a defined automatically. In your case, using Date / field number Format (for example: 99999999) will force the system to use the supplied format.

  Concerning
  Patrick

• Error: 0XC004F050 Windows Vista Home Basic product key is not valid for activation

  I bought this dell laptop 2 years. my laptop is to sometimes have blue error screen, but when I restart it, allows it to function normally. recently, when I turn on my laptop, my screen goes black and a box come up saying that the Windows Vista Home Basic product key you typed is invalid for activation.
  

  Then he gives me 3 options
  1. access your computer with reduced functionality
  2. enter a different product key
  3. contact Microsoft to help solve this problem

  I was trying to enter the product key as indicated on the sticker attached to the bottom of my laptop but still invalid product key. Code: 0XC004F050

  I had

  Diagnostic report (1.9.0027.0):

  -----------------------------------------

  Validation of Windows data-->

  Validation status: invalid license

  Validation code: 50

  Validation caching Code online: n/a, hr = 0xc004f012

  Windows product key: *-* - 4WD8X - M9WM7-CH4CG

  The Windows Product Key hash: EkdqJZ28Y9zyrh7DU/lHNjTXlQY =

  Windows product ID: 89572-OEM-7332166-00096

  Windows product ID type: 2

  Windows license Type: OEM SLP

  The Windows OS version: 6.0.6001.2.00010300.1.0.002

  ID: {B353C367-9E97-407C-A335-269CB0707324} (3)

  Admin: Yes

  TestCab: 0x0

  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002

  Signed by: n/a, hr = 0 x 80070002

  Product name: Windows Vista (TM) Home Basic

  Architecture: 0x00000000

  Build lab: 6001.vistasp1_gdr.100608 - 0458

  TTS error:

  Validation of diagnosis:

  Resolution state: n/a

  Given Vista WgaER-->

  ThreatID (s): n/a, hr = 0 x 80070002

  Version: 6.0.6002.16398

  Windows XP Notifications data-->

  Cached result: n/a, hr = 0x80004005

  File: No.

  Version: N/a, hr = 0 x 80070002

  WgaTray.exe signed by: n/a, hr = 0 x 80070002

  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->

  Caching the result: 103

  Version: 2.0.48.0

  OGAExec.exe signed by: Microsoft

  OGAAddin.dll signed by: Microsoft

  OGA data-->

  Office status: 103 blocked VLK

  Microsoft Office Enterprise 2007 - 103 blocked VLK

  OGA Version: Registered, 2.0.48.0

  Signed by: Microsoft

  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->

  Proxy settings: N/A

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)

  Default browser: C:\Users\Tien Siew\AppData\Local\Google\Chrome\Application\chrome.exe

  Download signed ActiveX controls: fast

  Download unsigned ActiveX controls: disabled

  Run ActiveX controls and plug-ins: allowed

  Initialize and script ActiveX controls not marked as safe: disabled

  Allow the Internet Explorer Webbrowser control scripts: disabled

  Active scripting: allowed

  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->

  Office details: {B353C367-9E97-407C-A335-269CB0707324}1.9.0027.06.0.6001.2.00010300.1.0.002x 32*-*-*-*-CH4CG89572-OEM-7332166-000962S-1-5-21-2878899211-3288161655-3842348923Dell Inc.. Inspiron 1420 Dell Inc.. A07 20080203000000.000000 + 00034303507018400EA04090409peninsula malaise Standard Time(GMT+08:00)03DELL M08 103103Microsoft Office Enterprise 200712fFic3JgCreGGRxyF8uMWB4R4Jcg =89388-707-1528066-6588114 ACD7202654E586

  Content Spsys.log: 0 x 80070002

  License data-->

  C:\Windows\system32\slmgr.vbs(1635, 9) (null): 0xC004E017

  Windows Activation Technologies-->

  N/A

  --> HWID data

  Current HWID of Hash: PAAAAAEABwABAAEAAQABAAAAAwABAAEAnJ80kiKfGtPqTSSWoFyuf/yQRoPeS1K88vTm9 + 9aSGmsViqF

  Activation 1.0 data OEM-->

  N/A

  Activation 2.0 data OEM-->

  BIOS valid for OA 2.0: Yes

  Windows marker version: 0 x 20000

  OEMID and OEMTableID consistent: Yes

  BIOS information:

  ACPI Table name OEMID value ValueOEMTableID

  REFERENCE DELL M08 APIC

  FACP DELL M08

  HPET DELL M08

  STARTING DELL M08

  Original title: my windows vista Home Basic product key is not valid for activation

  MCFG DELL M08

  M08 DELL SLIC

  SSDT PmRefCpuPm

  How can I solve the problem? Thank you.

  Run the Diagnostics of Genuine tool at this link http://go.microsoft.com/fwlink/?linkid=52012.

  Hi steph_ts,

  In addition to the suggestion of Andre.Ziegler, following links and check

  1. you remember to make changes to the computer before this problem?

  You can consult the following KB articles and try the suggested methods for error: 0XC004F050

  How to troubleshoot the error codes Activation Volume Windows 7, Windows Server 2008 and on Windows Vista computers

  http://support.Microsoft.com/kb/938450

  Error message when you try to activate a copy of Windows using the Windows Activation Wizard: "the Software Licensing Service reported that the product key is not valid: 0xC004F050.

  http://support.Microsoft.com/kb/950756

  Also see the following link for more information about reduced functionality mode:

  Error message when you start Windows Vista: "your activation period has expired".

  http://support.Microsoft.com/kb/925616/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Switch to the correct encryption certificate I get the error: "Key not valid for use is specified state."

  Used
  Now cannot open encrypted files.

  When you try to pass the correct encryption certificate I get the error:
  "Key not valid for use is specified state."

  See this http://answers.microsoft.com/en-us/windows/forum/windows_7-security/keeping-passwords-secure-microsoft-policy-on/39f56ef0-5d68-41ad-9daa-6e6019c25d37

  It is as it's supposed to as an anti theft precautions. I mean that data is encrypted, if somebody stole your hard drive and the hard drive boots and the other account it can receive data.

  If you not export recovery certificates and encrypting the data, you cannot redo the decryption.

  http://Windows.Microsoft.com/en-us/Windows/back-up-EFS-certificate#1TC=Windows-7

  If it's a default domain recovery agent. admin area. If it's home, to look for recovery certified you have exported.

  But third-party tools are there if you can remember old password the is to encrypt you can recover. But they are not free... and premium software is not be recommended or guided through support free forum due to the effort of preventing unnecessary advertising.

  You can do you own research about recovering data... just try to get you using the favorite search engine... "Restore access to encrypted EFS format files" or "Advanced EFS Data Recovery.

  Many more free guides will be available... Just keep in mind this is not a method to escape... you must remember your old password at least for decryption in the case where you export a certificate.

• My account is not valid for use in the US store?

  I m currently living in the United States but I can not buy certain items in apple store, it's always say that "your account is not valid for use in the US store" (mine is Vietnamese store). Is there anyone know how to solve this problem. Thank you

  If you are currently in the United States, then you must have a credit card US, with an address of billing in the United States, and then you can change for the US store. Without it, you wouldn't be able to change.

• Recently downloaded version 9.0.1 and the url is not valid for the default home page. The default home page is still supported?

  I currently have www.google.com set as my homepage, but Firefox says that the url is not valid for the default home page.

  The problem is now solved with the current version of Firefox 10.0. Thanks for the help ccbrunt and SafeBrowser.

• Pavilion a010dx x 360: update not validated for this computer

  Whenever I hit find my product and install a graphics driver for the pc detected, the finished download it is not validated for this computer.

  Johan1031 wrote:
  How can I change factory OS? If not, how am I supposed to update my drivers

  HP computers - get HP recovery disks or HP USB recovery disc
  Read this before ordering your recovery discs! (United States and Canada only)
  HP computers - performing a recovery of HP (Windows 8) system
  HP computers - using the Microsoft System Restore (Windows, 10, 8)

• Key not valid for use in specified state

  OfficeJet 4630 receiving facility message "Key not valid for use in the State specified" while installing.  Printing of basic but no other software is loaded.  Operating system is Win 7

  Tried HP support chat for several hours, but has been disconnected after restart in the first chat and do not know what happened to the second.

  Have turn off all startup programs and I tried USB and wireless facilities.

  Any suggestions for something else to try?

  OK got things working. Support has been a day towards the end of the call, and I wasn't available? But they sent me the same instructions that give @gimini02. I didn't follow all the instructions, but I think that the key performs the installation connected to the administrator account. The account doest show up until you use the command net user described in the post from @gimini02. I close all running programs on the but did not have recording start or clean install.

  The installation ran no problem and everything is well afterlogging with the standard add l id.

• You try to create VHDX or another format not supported for this version of the server

  Hello

  I have a problem with vWorkSpace do not load VM and I really hope that someone here might be able to add comments. We run vWorkSpace v8.5 on a box of windows server 2012 and v6.1 Hyper-V on Windows Server 2008.

  After running then changing the main image, I've updated the image of our cloud. Once the update of the virtual machine would not load, giving the below error

  End of the action (create) (failed to create. CreateVM: Unable to create the virtual machine of provided information. : CreateVhdxDisk: try to create VHDX or other format not supported for this version of the server. Path to the virtual disk: .avhd - call stacks - to Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)
  at HypervLocalExecutor.HvCreateVM (string strUser, strPwd, VmCreateData createData, String strDomainNameIP, VmResult String & result)
  to CHyperVClone.doClone (basic_string<>\,std::allocator > * nsHostName, basic_string<>\,std::allocator > * nsUsername, basic_string<>\,std::allocator > * nsPasswd, VmDefData * vmData, basic_string<>\,std::allocator > * strDomainIPaddress, NewVmInfo * newVmInfo)-> Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP))...
  5 March 2015 15:54:15 - 1392:8580511090155201372 - caught error: Stack Trace and stack Exception below:
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVhdxDisk (String parentDiskPath, String diskPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateDiskForVM (vmMgmntObj, String vmPath, VmCreateData ManagementObject & vmData, String & vhdPath)
  at Quest.vWorkspace.VirtualCore.HyperV.Server2008R2.CreateVirtualMachine (VmCreateData vmData, String domainNameIP)
  at Quest.vWorkspace.VirtualCore.HyperV.HvVmService.CreateVM (VmCreateData createData, String domainNameIP)

  We believe that it is somehow to do with Hyper-V under Windows 2008 and vWorkSpace running on Windows 2012 - the VHDX format is not supported by the version of Hyper-V server. A glance online confirms this. So my question is, how update the master image changed the format VHD vWorkSpace wants to use and is there a way to assign vWorkSpace don't know this format?

  I have widely in search of a solution to this line and not found anything it either, nor there seems a clear way in the vWorkSpace console to change that.

  Thank you

  Hello

  I suspect that you have created a snapshot on your model.  It is not supported, if you delete the snapshot so that the .avhd is merged to the vhd/vhdx and update the model in vWorkspace again.  If this does not work, you will need to delete the model of vWorkspace and then re-import.

  Concerning

  Paul

• Try to activate the Windows Narrator and get your license is not valid for this computer

  I try to activate the Windows Narrator for my son who is visually impaired and all he repeats to me "warns your license is not valid for this computer" I can't find anything that tells me what license is not valid.

  Download and run this tool of validation. If all goes well he will identify what is "not valid", or at least eliminate some possibilities:

  Validate Windows and Office using WGA Diagnostic tool -http://go.microsoft.com/fwlink/?linkid=52012

  Please download and run the tool diagnoses of Genuine:

  • http://go.microsoft.com/fwlink/?linkid=52012.
  • Save to your hard drive (the specifications vary according to the browser)
  • When downloaded, run it (double-click on it)
  • When the utility has finished its run, click on the "Copy" button

  Paste the report into your message here

  If you read this tip and it helps you, please click on the "useful Vote"button to "reward" myself with 'points'! '. Thank you

  Please click propose as answer to let others know the solution that worked for you

  Link to: Silverlight Applets mapping 2003 Menu for applications of office 2010 Ribbon

  Link to: research of 2007 addin commands PS: MS WHERE IS THE 2010 VERSION! HintHint!

  Link to: Menu Flash Applets mapping 2003 2007 Ribbon for all office applications

• Download the file from the TFTP and get this error "this image is not valid for this platform.

  Hi guys

  You try to download a new IOS for my CISCO ASA using TFTP I get the following error

  Access tftp://189.206.211.24/asa825-33-k8.bin...!

  % Error copy tftp://189.206.211.24/asa825-33-k8.bin (this image is not valid for this platform)

  -Anyone has the same error.

  Also, I have tryied using the ASDM but I get the same error.

  Kind regards.

  Hello

  As says the Description This is not for model ASA5580.

  Click on the link connected with your account

  http://software.Cisco.com/download/type.html?mdfid=281191384&flowid=4378

  Then choose the software Adaptive Security Appliance (ASA)

  Then navigate through the drop-down list on the left

  Provisional-> 8-> 8.2.5 interim

  And you will get the visibility (click to enlarge)

  

  -Jouni

• «This serial number is not valid for...» »

  In 2013, I bought and downloaded Photoshop and first 12 items on a Windows computer, but I recently upgraded to a Macbook Pro and I am at the step in the installation process where you provide your serial number. Unfortunately, whenever I try to make progress, I get the message 'this serial number is not valid for Adobe Photoshop Elements 12'. I have checked and make sure that it is the right code.  Does anyone know why this is, and how I might be able to fix it?

  Hi AJ_Baggins,

  Please check solutions for error: "serial number is not valid for this product" here and share the results in case you need more help.

  I hope it should work.

  Thank you.

• Hi, I tried to download Photoshop CS5 on new Macbook but received message: this serial number is not valid for this product. Previously, it has been installed on the PC.

  Hi, I tried to download Photoshop CS5 on new Macbook but received message: this serial number is not valid for this product. Previously, it has been installed on the PC.

  Purchase http://www.adobe.com/in/products/photoshop-premiere-elements.html

• "This serial number is not valid for this product." Why I get this message?

  While trying to install Adobe CS5 Web Premium on my laptop, I get an error message stating "this serial number is not valid for this product." I am sure that the correct serial number has been entered. It can be the cause of this problem?

  Error "serial number is not valid for this product". Creative Suite

  http://helpx.Adobe.com/Creative-Suite/KB/error-serial-number-valid-product.html

• I bought Adobe creative suite 5 master collection a few years ago. I got a new mac and I tried to install Photoshop. The serial number does not work (this serial number is not valid for adobe photoshop cs6 extended).

  Hello

  I bought Adobe creative suite 5 master collection a few years ago. I got a new mac and I tried to install Photoshop cs6.

  The serial number on the box no longer works (this serial number is not valid for adobe photoshop cs6 extended).

  I have the serial number with me if you're Adobe and contact.

  Thank you

  Susan

  Hi again,

  • Looks like you have some issues causing third-party plugins installed here.
  • Holding the SHIFT key launch PS and click Yes at the prompt, see if that does the trick.
  • Check this thread for more details-
    • https://helpx.Adobe.com/Photoshop/KB/error-could-load-fastcore-multiprocessor.html

  Concerning

  Rohit