From MyRIO of models

Similar Questions

• Saving files directly from myRIO on computer

  Hi all

  I met a simple but pretty weird problem. In my project of myRIO, I used to save files directly to myRIO (using a constant path of the file), and it works. For example, the way that I saved this next line (RawData_Fly2_E1_F_2016Jan26.tdms) is this:

  /c/RawData_Fly2_E1_F_2016Jan26.TDMS

  With the address above, this file is stored in this location: R:\c\RawData_Fly2_E1_F_2016Jan26.tdms

  However, now my project began to generate very large files, if I want to save the files directly to my computer, the myRIO is connected via a USB cable from the device. I have specifiled my file to be recorded directly under the C drive.

  I made the following changes: I used the control path of the file to specify the location, instead of using the constant path of file.

  But with this change, my file was not found. Basically, it's gone... All files that contain this change of location was not found at the specified location, or the location of origin.

  Here's a screenshot of my path of file control and file path indicator read directly the path to the file.

  You guys would help me how to properly save files directly from myRIO on computer?

  Thank you!

  Consider the myRIO as a computer - its own operating system and with its own file system. Write code LabVIEW is running on a computer that , without some kind of networking file transfer, it cannot see your computer.

  You would usually be:

  (1) data stream via the network to a VI running on your computer (e.g. the network stream) that records the disk on your computer.

  (2) use a method of transferring files of myRIO on your computer either automatically (for example FTP, HTTP POST file (?), files network), or manually (FTP / WebDAV)

• Synchronization of the comments of the column from the relational model to the data dictionary?

  I changed/added comments of column to a table in my relational model. When I try to sync the database data dictionary changes are never included the observations of the new column. In fact, I see that the values in the field 'Commentary in RDBMS' are different in the preview window to compare, but the line is not highlighted in red I guess that, in fact it is even dimmed. Also, I can not check the check box "selected".

  Is there a way to get comments to synchronize? I don't miss any option that I first? Is this a bug or an expected behavior?

  I use the version 4.0.3 x 64 of the Data Modeler.

  Any help would be appreciated,

  Charlie

  Hi Charlie,

  but the line is not highlighted in red I guess that in fact it is grayed out even.

  "that means property is excluded from the comparison - the same dialog box click on tab -" Options > properties filters '-you can control the properties to include in compare it it is to say ' comment in RDBMS ' must be checked.

  Press the button "Refresh trees" after the properties are set correctly.

  Philippe

• Implementation of tag in pages created from a Meta model

  I am updating a site and want to make sure I place my meta properly in individual pages tags, created from a template. Can you tell me if my placement is correct?

  Here's the code I added to my template:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml ">

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  <!-TemplateBeginEditable name = "doctitle"-->

  < title > Untitled Document < /title >

  <! - TemplateEndEditable - >

  <!-#BeginEditable "metatags"--> <!-#EndEditable->

  < style type = "text/css" >

  <!--

  {body

  Here is a page I created after the addition of meta tags:

  < ! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" > ""

  " < html xmlns =" http://www.w3.org/1999/xhtml "> <!-model InstanceBegin = 'Hand .dwt/modeles/2011' codeOutsideHTMLIsLocked = 'false'-> '.

  < head >

  < meta http-equiv = "Content-Type" content = text/html"; Charset = UTF-8 "/ >"

  <!-InstanceBeginEditable name = "doctitle"-->

  < title > Long Island, NY, 11550 music dance Art & amp; Drama lessons < /title >

  <! - InstanceEndEditable - >

  <!-#BeginEditable "metatags"->

  < name meta = "keywords" content = "piano lessons, guitar lessons, lessons, flute lessons, violin classes, afterschool performing arts, singing lessons, vocals, saxophone, trumpet" >

  < name meta = "description" content = "information on afternoon Arts Program of Young Musician Institute for piano, guitar, percussion, violin, Viola, trumpet, saxophone and cello" >

  <!-#EndEditable->

  < style type = "text/css" >

  <!--

  {body

  As usual, start and end editable sections appear in gray, and meta tag names are blue according to my diet, so I think that I do it correctly, however, I want to be sure before submitting it to google incorrectly. Can you tell me if I'm wrong?

  Thank you

  There is no 'correct' placement tags meta as long as they are legally in the header of the document.  And by the way, you do not need to create an editable area separate for them - they can be put in one of the two existing editable regions already there ("doctitle" or "head").

  Finally, while the addition of keywords meta will not help your page rank, it probably won't hurt her no more.  The content of this meta tag is ignored by all the major search engines.

• for beginners, better start from zero or model? help please

  so I've learned dreamweaver cs4 and fireworks etc for a few months now watch lynda.com tutorials and other things. I'm a construction site (or try) to sell mixers online. Progress seem to slow down, guys recommend using these models, you can get free or pay? If so, is it worth paying for? Thank you!

  Hi, I have a certain experience, building a site of electronic commerce as a beginner, but it is not clear if that is your real goal or not what you'e says.

  Even for a regular site without electronic commerce (e-commerce, I mean having a credit card shopping cart and taking orders online via your site, etc.), always things for me as in a fog - and slowly over time, the fog clears and I can see what is happening. So hang in there.

  Whatever it is, I advise to use a model, but it means different things, in function.  In Dreamweaver, you have CSS (Cascading Style Sheets) available models from which to choose, which are a good starting point. Recently, I used one to turn my site into CSS and leave the use of the tables behind.

  As a beginner, would do you well to begin to learn the construction of Web sites using CSS right from the start. It would be a huge advantage for you. In DW, in your first Panel under the column "create new", descend to the bottom and click on the folder 'more '. That will take you to all the available models. There, choose "Blank template" and "Html", then a specific model.

  I would like to choose a model that is "fixed", which means that the width of the construction is specifically defined in pixels, as a 2 column fixed left sidebar with "."

  I heard that that fixed CSS templates (etc vs. liquid) are easier for beginners to work with.

  IF you go to an e-commerce site, I would recommend using storefront software, which gives you very good models to use - and their software works as a DW Plugin, which means it fits in the DW interface and making it easier to use. Its software allows you to insert a shopping cart interface shopping and what is e-commerce-driven in your site.

  It is a fairly expensive software, but it is also a very positive alternative for beginners in e-commerce. In addition, their models are very respectful of the designer they give the user a lot of room design to customize the look of their site.

  As a beginner, I must warn you - to have an e-commerce site, online site is difficult and it takes a sizeable presence for it work, which means a lot of stamina and a good number of products to sell.

  in any case, I hope I helped... Good luck

  Frank B.

• Why cannot delete music from Apple tv model A1625 tvOS 9.2.2 (13Y825)?

  I tried in my laptop MacBook Air version on iTunes 12.4.2.4 10.11.5 and I deleted the music I didn't but it is still on my Apple TV, and I can't remove it from there!

  I'm currently updating my Apple TV A1625 tvOS 9.2.2 from the apple site.

  I hope this helps...

  Apple TV A1625 tv OS running (identical to front!)

• Product Information from Toshiba tool model number is "invalid".

  Just received alert Tempro about upgrading Windows 10 (currently on Windows 7)
  It will list all products which could be upgraded to Windows 10
  It seems to do that no list for my Satellite C855-1J0
  I used the Toshiba product information tool that returns information identical to that on the plate on the base of the machine.
  On which type in the update of Windows 10 box, she's back in is not a valid model number.

  The machine was bought in a shop chain throughout the country, so there is no reason to doubt of authenticity.

  Is the info on the specific plate?
  If so, then why not identified by the compatibility of Windows 10 list?
  Is it right for the upgrade?
  I have already registered on the Microsoft website "get Windows 10'.

  Toshiba take in charge that the nine models of laptops for Windows 10. For them, less than two years older laptops models are 'old' models? They don't even support Windows 8.1 laptop models for Windows 10, not to mention these models like yours with Windows 7 installed.

  Who cares what you said Microsoft, if Toshiba does support your drivers for Windows 10 laptop model because they like to have small extra margin on your model, it is not good to install Windows 10 no mater what Microsoft compatibility app tells you. Next time buy those brands that will support new drivers for laptop, more than three years, not those who, like Toshiba, who support only nine drivers with new laptop models.

• Error 0xC004E002 connecting after installation of Windows Vista from a different model of the Dell machine

  Original title: cannot open a session on... Error 0xC004E002

  My Dell latitude d620 refurbished came equipped with windows xp professional. My son installed windows vista that came with a Dell Inspiron on the first computer (latitude d620) and has not removed from windows xp. Now I can not connect on the latitude, and I get the error 0xC004E002. Can someone please help. I would try a system restore, but I can't move the log to the screen...

  Hello

  You can not legally do what you did.

  The Dell Inspiron Vista OEM license is originally related Dell Inspiron it was installed on.

  This Vista license is NOT transferable to your Dell Latitude.

  That's why you get this error.

  Reinstall XP.

  See you soon.

• How can I add contacts from my nokia (model 2700) to i-phone 5 s Please?

  I recently bought ip 5s and want to move or copy contacts from my old phone nokia 2700. How to do it please?
  When I sync nokia using my pc (windows 7), it synchronizes the address to the windows address book, but the same is not (or cannot locate it)... when I check in outlook express (office 2007) contact list is empty!
  someone please help!

  You will need to find software for your iPhone that will pick up the info from the MICROSOFT Windows address book.

  I suggest that you ask Apple being the way in which the iPhone is an APPLE product...

• Exclude foreign keys from the relational model comparison

  Hello!

  Is it possible to exclude foreign keys for comparison when comparing relational models?

  It's the same and when inporting dictionary of data in the relational model.

  Thank you very much for the help!

  Kind regards

  Dimitar Angelov

  Hi Dimitar,

  Yes it is possible to do using "generate DDL' flag - there is an option in the dialog box"compare models"- tab" Options > compare Options '-C' is a checkbox "use generate DDL settings to filter objects.

  You must make a DDL generation with open physical model that will be used - in the DDL generation options you can deselect items you don't want to have in comparison. You can save as a configuration of generation of DDL or simply do it before the comparison.

  After comparing models of dialog, you can check "Use generate DDL settings to filter objects" box to check (and probably to load a configuration of generation of DDL) and use the buton "refresh trees."

  You can use this method to filter the tables, constraints PK and UK, index, constraints FK and the views.

  Philippe

• Add an offset from a model chirp

  Hello world

  I would add an offset from a chip model, someone has an idea how to do that? I use a chirp model to draw the FRF of a system excited by a shaker but would need to apply a constant voltage to the agitator before running my chirp (movement around the balance of shift) model.

  Thanks in advance,

  Alex

  shinagan wrote:

  I would like to Add a shift...

  The digital palette has a function 'Add '. That's all you probably need.

  A scalar shift of the wire to a single entry and table ot the other.

• How to create a DLL from a .mdl file model to use on veristand simulink

  Hi all

  I want to create a .dll file from a simulink model .mdl file. I created a simple "Sample.mdl" file that adds two entries and gives the result.

  Before you build the .dll, I tried to run file .mdl veristand. Here, I got the below error.

  Method 1: I tried to create a DLL out of it by going to the Simulation-> settings-> workshop in real-time. Here I tried to change the target file system to NIVeriStand.tlc, but I'm not able to see that in the system target file browser dialog box. Can anyone tell me the reason behind that.

   

  Then I tried method 2.

   

  Method 2: I created this .mdl C code using grt.tlc in the Simulation-> settings-> workshop in real-time. I clicked on 'build' button, then he created C equivalent for this code. Using Microsoft visual C++, I tried to generate the .dll file, but I have the following errors.

  Can someone help me on this please. My goal is to launch this model with veristand eithor in.dll or .mdl file format

  Thank you

  Herald

  
  

• How to automatically remove comments from model in the page created from template?

  Hi all

  I would like to eliminate generated Dreameaver of comments in published pages.

  Beast, perhaps, but they are really a loss (of space, bandwidth, etc.).

  Does anyone know if there is a way to automatically eliminated in the pages that are generated from a model?

  For example, on this page:

  http://Libri-belli-Ma-anche-romanzi-Brutti.it/Daria-Bignardi-Acustica-Perfetta.html

  a comments from the original model.

  <h1><!-InstanceBeginEditable name = "Autore + Titolo"->Daria Bignardi: craftmanship the Acustica<! - InstanceEndEditable - >< /h1 >

  Someone at - it a suggestion on how they can be quickly withdrawn before publication on the server?

  Thanks all!

  Riccardo

  No, can't be done.  Markup DWT tells the program that it is a model.  FrontPage/Expression Web also has the TPL files and uses a similar markup for its models.  Only way to get rid of it is to move to a language server as PHP or CMS solution that includes uses side.

• First HP - mathematical model does not

  I have a HP graphing calculator first - so far, he hates 100%...currently, have still another problem with the * beep * thing.

  I'm learning to use it and use the key from the mathematical model... manual says hitting the C button... that shows a choice of different models... well.  I choose the photo that resembles a nth root function...

  The said user manual it will show a symbol @# $@ #% $, but it's not, it shows "NTHROOT" words on the line instead.

  So, how in the heck do I the calculator works properly? It is only the first attempt to do anything on this subject... can't do a squat until now. No understanding of why is it pretty darn difficult to do basic stuff.

  Yes, I know that I can also ysé shift - y ^ X button but that does not solve the problem.

  Thanks in advance for any advice, or should I just throw it out and try a better calculator?

  Paul

  You see NTHROOT because you have disabled manual entry.

  Press SHIFT home (Settings) and select entry: manual.

  You can also specify if history shows the radical or NTHROOT by turning / disable (respectively) the "Textbook Display" mode, which is on page 2 of the home page of settings.

  Hope that helps!

• Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

  Is the designation of the precise A1286 model for a 2012 Macbook Pro 15.4 mid "computer?

  OVERVIEW
  Introduced	June 2012
  Discontinued	October 2013
  Model identifier	MacBookPro9, 1
  Model number	A1286

  Edit: in fact this model number is used for some units, from a late model ' 08.