Similar Questions

• From server managed by using the Node Manager command line

  Hello
  
  I have configured the Node Manager and it is connected to the administrator of the server without problem. Now, I wanted to start the server managed through the console but it is a failure and my guess is that the syntax of the command line used is not correct.
  
  My question is, how do I change the command line used to start the Node Manager-managed server? I try to use the configuration tab start the server and it seems that does not. I also try to update the file .properties for the managed server.
  
  Whenever I look at the managed server logs, it gives me this line...
  
  NodeManager > < start WebLogic server with command line: <>...
  
  The command-line in newspapers aren't what I put in the .properties file or on the Server Start tab. She is from somewhere and I don't know where. I just want to set up the command line Node Manager uses to start a managed server.
  
  If all goes well, I'm clear with my problem and someone might be able to help. Thank you.

  You can try to follow the Option-2) mentioned in the link below: http://jaysensharma.wordpress.com/2010/03/26/nodemanager-based-managedservers-setting-mem_args/

• How to export a .sql file, I created from Oracle Application Express of SQL Server Management 2012?

  Hello

  I was wondering if you could help me.

  I'm trying to find out how to export a .sql file, I created from Oracle Application Express of SQL Server Management 2012? I'm not very technical, but it seems that the Oracle code does not work with SQL Management Studio when I drag the file inside.

  I need the database Oracle express and its data to enter in SQL Management Studio, so any help would be much appreciated!

  Thank you.

  Hello

  Your question is beyond the scope of this community.

  Please repost your question in the SQL Server TechNet Forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• A SQL server management studio 2012 error: PERCENTILE_DISC function is not allowed in the current compatibility mode. It can only in mode 110 or higher.

  Our company just upgraded to SQL Server Management Studio 2012 and it has been very useful because I needed to use the percentile for the code I wrote. As a first step, the function did not work because I set the compatibility mode 110 level. After that I did, the function worked. However, now it does not work yet, and I get the same error:

  The PERCENTILE_DISC function is not allowed in the current compatibility mode. It can only in mode 110 or higher.

  I went to the properties of database section, then options and noticed that the compatibility mode has not changed, it is set to "SQL Server 2012 (110). I even used the following code to see if that would help at all even if the compatibility mode is already on this mode:

  ALTER DATABASE Analytics
  SET COMPATIBILITY_LEVEL = 110 
  

  Someone already had this problem or knows if I need to change something in the properties of database for this function work? Is this just a bug in the new version?

  Hello

  I suggest you post this question in the SQL Server 2012 TechNet Forums: http://social.technet.microsoft.com/Forums/en-us/category/sqlserver

  Thank you.

• Error starting from domain server / managed by admin

  Hello
  
  I have installed Weblogic 10.3.3 on windows 7 64 bit and created a single domain weblogic Setup Wizard. According to my domain server unique to understand the purpose of admin and the server managed.
  
  Now, while starting the domain server, I'm getting below error messages:
  
  E:\Middleware_Home\user_projects\domains\first_domain\bin > setDomainEnv.cmd
  \Java\jre6\lib\ext\QTJava.zip was not planned at this time.
  
  
  E:\Middleware_Home\user_projects\domains\first_domain\bin > startWebLogic.cmd
  \Java\jre6\lib\ext\QTJava.zip was not planned at this time.
  
  
  E:\Middleware_Home\user_projects\domains\first_domain\bin > startManagedWebLogic.cmd
  \Java\jre6\lib\ext\QTJava.zip was not planned at this time.
  
  Please help me where I should start looking. There is no logfile created in Middleware House. I just started to learn Weblogic (3-4 days back).
  
  Thank you
  Neeraj
  
  Published by: Neeraj Bhatia on October 18, 2010 20:11

  Hi Neeraj,

  Please remove these setting the class path and restart the system.

  After that start your server, you will not find any problem.

  So it solves your problem :)

  Kind regards
  Kal.

• HP mini 110: cannot use my wifi as it currently disabled from Device Manager according to assistant Wifi

  My system is asking for me to insert an artheros wireless adapter and I installed all the drivers, but my WIFI isint working again and when I downloaded assistant wifi it shows that he is disabled from Device Manager that i have tried everything I could give.

  pls kindly help.

  Here is the my system informatiom

  HP Mini 110-1160SA PC

  Best regards.

  Hello:

  I think that you need this card driver wireless for your 110-1160sa.

  This package contains drivers for the Broadcom Wireless LAN Server supported in models cards mobile supported and operating systems.

  File name: sp44923.exe

• Add Server 2012 R2 Server Manager servers dialog box problem

  I have a problem in 2012 R2 Server when you add a remote server to all server management interface.   Using the dialog box add servers to add a workgroup server (no configured DNS server), I added the problem of server using the IP address.  A dialog box appears that says "can't resolve host would you like to add it anyway?  For awhile do this, I clicked 'No', but finally clicked on Yes and the server by its server name has been added.

  However, I can not access this server remotely, make sure that it is in the list of approved first hosts.  I have the correct IP addresses and have firewall advances for troubleshooting I can connect on the server locally with an administrator account.

  Removing the server from the remote management console, and then add that it does not solve the problem as server name solves always in the dialog add a server with the credentials apparently wrong.  It is the only server of four that I made this mistake, the other three work great after choosing 'Yes' to add the server non - solve anyway.

  My question is, how do I clear the credentials of server 'broken' out of the 'Add Server' dialog box to the server properly.  The added server is another Server R2 2012.  I changed server names and addresses IP, but the dialog box always detects the server with the new information and still not will not properly add it to Manager remotely.

  And the idea of how to do to erase the old credentials?

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Dell PowerConnect 2724 managed Mode reference works do not?

  I recently acquired a dell powerconnect 2724 from a friend, and I can't find the web interface. I tried the default IP addresses and I looked on an application to register all IP addresses on the network, and the thing only dell was my PowerEdge R710. I made sure it was in managed mode and I tried to reset it. Suggestions?

  From the factory, the PowerConnect 2708/2716/2724 units have a default IP 192.168.2.1 255.255.255.0 assigned. This IP address is assigned to the management VLAN 1. Be sure not to delete the VLAN 1 management or you will not be able to manage the switch. If the switch is unmanageable, and then change the transition to unmanaged and return to managed mode to reset the default settings.

  Remember that the client attempts to access the switch is also in the 192.168.2.0 subnet. If the customer is not in the same subnet, it will be able to access the 192.168.2.1 IP address. Check and make sure that nothing else on the network also has 192.168.2.1 assigned.

  Keep us informed.

• The implications of Cisco Telepresence server operation mode

  I have a CISCO Telepresence server that is currently running in mode managed locally, if change you it remotely and add it to my TMS, will I lose all my permament locally created conference rooms? (be they get deleted?)

  Thank you!

  HI Douglas.  TS blade didn't need to be mode remotely managed so that it can be managed by TMS.  This mode is used for the management as a conductor Telepresense.

  When it was presented, was 3.0 TS.

  Release notes:

  http://www.Cisco.com/en/us/docs/Telepresence/infrastructure/TS/release_note/Cisco_Telepresence_Server_Release_Notes_3-0_2-24.PDF

  Page 2 pretty much answer your questions here.

  If your not using a conductor or by using your own program API to use TS in this mode, its better to leave behind in managed mode and add the system to MSD and leave it that way.  This is the normal operating mode if you use the TMS.  Let in managed mode locally, add it to the TMS and you can book etc. against it using TMS meetings.  If automatic discovery is enabled in TMS, permanent meetings should appear in the CCC.

  I hope this helps.

  VR

  Patrick

• Could not open file mdf in Microsoft SQL Server Management Studio Express 2005

  I had Microsoft SQL Server Express 2005 already installed. I just installed the Microsoft SQL Server Management Studio Express 2005 and tried to open my mdf file. I get an error message that says:

  There is no editor available for ' C:\Inetpub\wwwroot\intran et\app_dat a\intranet .mdf).

  Make sure the application for the type of file (.mdf) is installed.

  I did something wrong? I just clicked through the default values in the Management Studio Express installation.

  How can I get it work?

  1. Log in to SQL Server Management Studio.
  2. Navigate to the database that you want to restore.
  3. Right click > tasks > restore > database.
  4. Once on the general tab select "from device" for the source of food, and then access the .bak file that you are restoring.
  5. Check that the Destination for restore is set to the correct database.
  6. Select the Options tab.
  7. Check "Overwrite existing of database (to be REPLACED)"
  8. Click OK
  9. If she is unable to help you, then you can use software professinal for sql databases crashed https://repairsql.recoverytoolbox.com/ Recovery Toolbox for SQL Server

• vCenter Server Linked Mode Configuration

  Buenos dias a todos,

  UNA pregunta: Se you can use/configurar el complement "vCenter Server Linked Mode Configuration" between various VC (verse 5) en Dominios different y SIN relaciones confianza?

  Hi all
  A question: you can use / set up the "vCenter Server Linked Mode Configuration" card from several VC (verse 5) in different domains WITHOUT trust relationships?

  Official documentation:

  Instances of server vCenter in a group of related modes can be in different areas, if the domains have a two-way trust relationship. Each area must approve other areas on which the server vCenter instances are installed.

  Kind regards

  Mario

• Primary domain server admin can be used to control the server managed in the secondary area?

  Hi Experts,

  I have 2 boxes of unix, and I have 1 installation of weblogic on each (primary) and secondary site.

  The implementation is as listed below:

  PrimarySite

  MainDomain: 1 Admin Server, managed server 2, 1 cluster

  SecondarySite

  MainDomain: 1 Admin Server, 2 servers managed, 1 cluster

  Questions

  1. can I use Admin Server primary site to control/manage servers managed at the secondary site and use the secondary site to control the server managed in the main site?

  2. I'll be able to have smooth failover and replication of cluster1 session in a primary site to cluster2 in the secondary site.

  Tumi

  (1) server of a Domain Admin cannot control all servers managed from any other domain.
  (2) a load balancer allows you to switch between sites and implement cross-cluster replication as described in the link below: failover and replication in a Cluster

• I can't activate the Server execution mode

  I'm 10.11.3 on a mac pro with the version of the app 5.0.15 server OS. I tried to activate the performance with the success mode. I started on the recovery partition to disable the integrity of the system, but still an error message when you try to activate performance mode in the terminal:

  RP-server: ~ Server$ serverinfo - material

  This system is currently running on the server hardware.

  RP-server: ~ Server$ serverinfo - setperfmode TRUE

  ERROR: Server execution Mode could not be changed.

  RP-server: ~ $ Server

  Any idea is appreciated

  Once you have a full backup of the system or another archiving mechanism allowing you to return to your software, try:

  sudo serverinfo - setperfmode TRUE

• Unable to see the Collections in remote desktop Services in Server Manager

  It doesn't seem to be a category for Windows Server for some reason, so I apologize if this is in the wrong category:

  We recently had an administrator leave our of the it group, and he was the one who had set up our fund services / remote server.  Recently, we wanted to deploy another remote application and found that we were not able to see the "Collections" option in the server in remote desktop services manager.  The only option listed is "servers".  However to reactivate the account administrator and the server like him gave us all permissions to see the option of Collections and to deploy another remote application.

  My question would be, this is a policy of setting Group / somewhere that is limiting the other users of the full access to Office services in Server Manager remotely.  I looked everywhere on the server (and google) to see if I could find where this setting is vain.  Any suggestions/help would be greatly appreciated.

  Thank you!
  Heda

  Hello

  Server forums are in an another Microsoft Community to it.

  This community is mainly for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Win2012 Server. Y at - it a shortcut to reach the Collections to the remote desktop Services without going through the Server Manager

  Win2012 Server. Y at - it a shortcut to reach the Collections to the remote desktop Services without going through the Server Manager?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.