Front Panel does not properly

Similar Questions

• Controls on the front panel does not work

  In the attached vi (I've stripped down to simplify things), I have a problem with the controls on the front panel does not when you click on the control to acquire it. It of probably something obvious but got me to loss.

  Thank you

  It is probably because you are in the State to acquire until you're done absorbing.  Meanwhile, none of your other events can run.  You have events to acquire: let the mouse.  There is a setting for "Panel before locking up the end of the occurrence of the event.  Given that the event cannot process until your State acquisition is completed, the façade will be locked.

  I would recommend another loop for the acquisition of your data.

• Update panels does not properly since the 2015.2.1

  My sidebar panels does not work properly since the update. Hit the tab key does not hide the sidebar: sidebar remains visible. Also, sometimes I can't access the menu bar, or change view (shift f command).

  On the retina mi Macbook Pro, OS X 10.11 2015.

  I drove back to 6 and are no longer problems. Any suggestions on how to upgrade to the current version without problems?

  Make sure that you are on 6.1.1 the latest stable version.  Help > system information to check your version.  See these instructions if you are not on 6.1.1: http://www.lightroomqueen.com/how-do-i-roll-back-to-lightroom-2015-1-1-or-lightroom-6-1-1/.  6.1.1 LR has some important bug fixes to 6.0 which has affected a large number of people.

  Adobe has apologized for the mess in LR CC 2015.2 / 6.2: update of Lightroom 6.2 Release and apologies, update of Lightroom Import 6.2. So don't waste your time trying to get 6.2.1 work - wait for 6.3 and let others do the beta testing.

• Front Panel does not work on my Qosmio x 305-701

  I m using vista 64 bit and my started Panel does not.

  Like the other problems with this model, I hear the beep when I touch the buttons FN keys work fine.

  My bios version is 1.70, the last one being for the moment.

  Toshiba Hardware Setup Utility, TOSHIBA Flash Cards Support utility is installed and running, but when I try to install the latest version of Toshiba value added for Windows Vista I get ID_ERR_NOTINSTALLVALZ_MESSAGE and not able to continue the installation.

  I tried to uninstall all of the Toshiba Utilities and try to install again but the same thing. I think 64-bit is not supported or something's wrong with her.

  Is there anyone else does in the face of this problem so far?

  Thank you all

  > I m using vista 64 bit and my started Panel does not.
  This means that he has worked in the past?

• VI front panel does not close when it is done executing, when this vi was called by reference.

  I created a simple vi set to indicate the problem I'm having. I run dynamically under vi to leave a main application. Simply the main application is my test exec and the Subvi I call dynamically is different tests. In the example I have write here the criterion vi is called Test electric 1(vi). I configured this electric Test 1 vi to see the front when it is called and close later while initially closed.  Problem is that it doesn't close before.

  Other things to keep in mind

  • I want to be able to run the vi test and do not wait until it is done.

  I'm using LabVIEW 2012 SP1.

  

  Basically the fence after that call questions only if the VI is called as a Subvi (as if you open you a VI and run it, it does not close when it's done).  Are two ways to work around this or have your app high lvl close the VI when it's done, it's explained here:

  http://digital.NI.com/public.nsf/allkb/987B2026B41BD39786256CF800032E8C

  or having your VI close when it's done.  A reference of the VI and the front panel: Close call node.

  I hope this helps.

• Security on the front panel does not work

  Hello

  I have a problem and a question:

  Problem: I created some controls on the front panel and some groups which they are responsible. Administrators can see and do everything, the operator cannot see some of them. If I build exe it works on development PC but if I copy them to another PC, it does not. It does not show these elements of façade. Areas are the same, SCADA, only the names of PC are different. The two computers are not in the same network. I create local domains and users on two computers through domain account manager. What could be the problem?

  Question: How can I create an access control list (ACL) and assign them to the elements of façade programmaticaly? What is the syntax? I have found no examples of code.

  Thank you.

  I found the solution. Maybe someone also needs:

  You must copy the folder C:\Program Files (x 86) \National Instruments\Shared\Domain development pc to other PC, in which you want to have the same field and same users. It does not have to generate the new domain with exactly the same name on another pc and generate new users. You must copy the whole directory of your pc to the other pc. It works now.

• Front Panel does not (exactly 2 even while in flat sequence loop)? LabVIEW BUG?

  Hello world

  I have two while loop with exactly the same code and a user in each loop event structure,

  They both make the same thing which is too run until IMAQ image control (one line) click on a recording.

  I used a flat sequence to manage the order of execution.

  The problem is when I use only one single loop (put another in a diagram to disable) the façade answer perfectly and the program does what it should, but when I activate the two loops stuck in case of timeout...

  I do not understand what is happening that I can't do any activity of façade that would be registered, enclosed is a copy of the VI (you need NIVision run the vi).

  Any idea? Is this a bug or did I do something wrong?

  Thank you very much

  Best regards

  This isn't a bug, but the expected behavior. You cannot sequence structures event like this, they both need to be ready to react. Use a single event structure and a state machine architecture. You have about 4 copies of basically the same code of event management. Try to combine everything in one!

  What happens in your case?

  Answer: The two structures event will begin immediately queues of events, but the second event structure cannot respond to them because it is inaccessible due to data flow. In addition, the second structure of the event is set to "lock the front panel until the end of the event. Given that the event cannot end as explained above, the façade is locked up forever.

• Satellite A200-1N1: "Satellite" LED on the front panel does not light up

  Hi people!

  I noticed that my LED with the word "Satellite" on the front panel lights.

  You have all the hypotheses on the causes?

  Hi Maresha,

  The front 'logo' LED is enabled or disabled using a BIOS "Display front Logo" option that can be set on IT or OFF you need. Access your BIOS settings (F2 at startup) and check that this setting is set to 'ON '.

  Kind regards

• The library panel does not properly

  Hello!

  I have trouble using the library in Photoshop CC Panel (and other applications that use the library panel as well). At first glance of the Panel library seems to work very well: I see my libraries, can create new sections and drop the items in the library panel on a work of art. But: I can not add new elements in a section of the library! If I drag and drop an element simply nothis happens (except the cursor changes to show that it can copy the element).

  What I've done so far to solve the problem:

  (1.) I've disabled and re-enabled Photoshop

  2.) I uninstalled Photoshop via the CC Panel, deleted the folder in the Applications folder and reinstalled Photoshop again

  Unfortunately, none has resolved the problem. Even after a clean and fresh Photoshop installation, the problem remains the same.

  After digging a little further, I found a newspaper named "CC PHXS 16.1.2.log library panel" file which shows the problem I guess. Photoshop starts was recorded as:

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) Panel initialized: v2.3.1048

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) CC libraries: Configure: shared local storage >

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) tried to run: $. _ADBE_LIBS_PHXS.getTooltipState)

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) failed with: error EvalScript.

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) tried to run: $. _ADBE_LIBS_PHXS.getCurrentState)

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) failed with: error EvalScript.

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) CC libraries: loadExistingLibrary

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) CC libraries: loadExistingLibrary

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) CC libraries: loadExistingLibrary

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) CC libraries: loadExistingLibrary

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) CC libraries: loadExistingLibrary

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) CC libraries: loadExistingLibrary

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) CC libraries: loadExistingLibrary

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) CC libraries: loadExistingLibrary

  Thursday May 5, 2016 13:53:51 GMT + 0200 (CEST) CC libraries: loadExistingLibrary

  ... and if I try to drag / ' drop an item in the library panel:

  Thursday May 5, 2016 14:07:48 GMT + 0200 (CEST) tried to run: $._ADBE_LIBS_PHXS .saveAssets ({"name": 1462450068115}, it's true, [])

  Thursday May 5, 2016 14:07:48 GMT + 0200 (CEST) failed with: error EvalScript.

  Thursday May 5, 2016 14:07:48 GMT + 0200 (CEST) tried to run: $._ADBE_LIBS_PHXS .saveAssets ({"name": 1462450068115}, it's true, [])

  Thursday May 5, 2016 14:07:48 GMT + 0200 (CEST) failed with: error EvalScript.

  I assume that the application has some difficulties to run the adobe scripts... but how do I solve this problem?

  I use the last version-CC, new installed Photoshop CC on an iMac with OSX 10.11.4 El Capitan

  Anyone has any idea what goes wrong?

  Thank you!!

  Dear Adobe-Support,

  After two weeks of trial and error, by myself and support absolutely useless Adobe in the forum as well according to the cat , I found the problem by myself. This is a problem in the functioncall evalScript! As soon as a volume bearing the name of 'Library' is mounted all evalScript calls like $.evalFile("/Library/Application Support, Adobe, CEP, extensions... ") no longer works. Someone remembers that the volumes are mounted at ' / Volumes ' so a volume called 'Library' has a mount path as "/ Volumes/library" but - hey - research from Adobe on this volume even if the absolute path in the script is "/ Library/Application Support /...» ».

  Thanks for any support!

• Japanese police on the front panel does not

  Hello

  I'm new on the use of LV and learns that when I hit a Japanese character, it indicates text of garbage.

  System:

  Windows 7 Pro 32 bit SP1

  LabVIEW 2013

  Problem:

  Whenever I touch in Japanese characters, the result is garbage, but when I tried to export the VI, and when I open the txt file, the character is written correctly.

  Looks like that in the front the characters are displayed incorrectly.

  I have attached the locale and also the garbage in the façade for reference, as well as the printscreen of the txt export.

  Any solution for this one?

  Ahh... It solved!  Region/language format must be set in both Japanese... (Local and location should be also at the Japan) weird...

  For users speaking Japanese, it may be difficult for you because the clock/date etc will also be in Japanese.

  In any case thanks for the responses I got from you guys... Bravo will be given

• device control panel works not properly. Cannot read messages about it. How can I fix this?

  Have a HP Officejet 6500 E709n, OS is Windows 7-64 bit. Control Panel on the front of the printer device does not properly. Cannot read messages of information/on it.  What is the problem?

  Certainly looks like a hardware problem (LCD going / has went wrong). At this point, I recommend you contact the support for repair or replacement.

• Setup.exe does not properly

  I'm trying to upgrade to Windows 7, and at one point in the configuration of several programs are listed to be uninstalled, when it gets to the Realtek USB 2.0 card reader a pop window that says setup.exe does not properly.  Cannot uninstall in Control Panel either. Also tried disabling antivirus and firewall as a suggested site. Is there a way around this kind of Setup Windows 7 allows you to work around this problem

  Repeat: You need upgrades to Windows 7 not Windows updates.
  http://social.answers.Microsoft.com/forums/en-us/w7install/threads

  Please post on the forum for Windows 7 update/install. TaurArian [MVP] 2005-2010 - Update Services

• COQ2014: COQ2014 AMD/ATI does not properly

  2 messages warn me for "AMD/ATI does not properly" and "search solution AMD Display adapt-ATI Radeon Graphics Cards.  Search for updates, solutions with nothing appear.  I don't know what that precisely uninstall nor where the new material.

  Thank you!

  Dear customer,

  Welcome to the HP consumer's Support Forum!

  Please try and uninstall the graphics driver AMD/ATI to address current from the control panel > programs and features.

  After you have uninstalled the current graphics driver, please try and install the following driver and check:

  Suite software Catalyst:

  http://support.AMD.com/en-us/download/desktop?OS=Windows+7+-+32

  Hope this helps, for other queries in response to the post and feel free to join us again.

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you
  GR1
  Although I am an employee of HP, I speak for myself and not for HP

• NVIDIA Control Panel does not open

  I just reinstalled Windows 7 on my PC and the NVIDIA Control Panel does not open when I click on the link in the windows control panel.  I installed it by using Windows Update.

  Updates Windows reports that it installed properly but the Panel itself will be open from nt.

  Should I remove it and reinstall again?

  Version is Ver: 191.07

  Hi AdelaideJohn67,
   
  I suggest to uninstall existing NVIDIA Control Panel and restart the computer. Visit the NVIDIA Web site, download and install the drivers manually.

  http://www.nvidia.com/download/find.aspx?lang=en-us
  After installing the drivers, restart the computer and just do a right click on your desktop and watch if the NVIDIA Control Panel whether or not written.

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Safari Web Clip does not properly

  Hello everyone

  I have a problem with safari Web Clip and that is does not properly for almost all pages, as example, I participate in a contest of therapy dbrand/unbox, and I really don't want to open the web page, whenever a new winner is announced, so I created a web clip, but it does not work well When I click the web clip icon he asked the location of the clip and when click on done, the web clip is from a different region and I can't fix.

  

  

  Is this some sort of bug or can I fix it myself?

  Web Clip still didn't work if the cut element remains in the exact same on exactly the same site. This is apparently not the case here.

  Dashboard widgets in general, are an old technology that has not been updated in many years.