Japanese police on the front panel does not

Similar Questions

• Controls on the front panel does not work

  In the attached vi (I've stripped down to simplify things), I have a problem with the controls on the front panel does not when you click on the control to acquire it. It of probably something obvious but got me to loss.

  Thank you

  It is probably because you are in the State to acquire until you're done absorbing.  Meanwhile, none of your other events can run.  You have events to acquire: let the mouse.  There is a setting for "Panel before locking up the end of the occurrence of the event.  Given that the event cannot process until your State acquisition is completed, the façade will be locked.

  I would recommend another loop for the acquisition of your data.

• Security on the front panel does not work

  Hello

  I have a problem and a question:

  Problem: I created some controls on the front panel and some groups which they are responsible. Administrators can see and do everything, the operator cannot see some of them. If I build exe it works on development PC but if I copy them to another PC, it does not. It does not show these elements of façade. Areas are the same, SCADA, only the names of PC are different. The two computers are not in the same network. I create local domains and users on two computers through domain account manager. What could be the problem?

  Question: How can I create an access control list (ACL) and assign them to the elements of façade programmaticaly? What is the syntax? I have found no examples of code.

  Thank you.

  I found the solution. Maybe someone also needs:

  You must copy the folder C:\Program Files (x 86) \National Instruments\Shared\Domain development pc to other PC, in which you want to have the same field and same users. It does not have to generate the new domain with exactly the same name on another pc and generate new users. You must copy the whole directory of your pc to the other pc. It works now.

• Satellite A200-1N1: "Satellite" LED on the front panel does not light up

  Hi people!

  I noticed that my LED with the word "Satellite" on the front panel lights.

  You have all the hypotheses on the causes?

  Hi Maresha,

  The front 'logo' LED is enabled or disabled using a BIOS "Display front Logo" option that can be set on IT or OFF you need. Access your BIOS settings (F2 at startup) and check that this setting is set to 'ON '.

  Kind regards

• Re Windows XP: At the opening of the hearts, the window is very small. How can I increase the window to fill the screen. Double click on the top panel does not work.

  Re Windows XP: At the opening of the hearts, the window is very small.   How can I increase the window to fill the screen.   Double click on the top panel does not work.

  Hi Rosa,.

  The size of the window for Hearts is actually design in Windows XP.

  However, there is a solution. You can follow these steps:

  
  Step 1

  a. first of all, copy the game.

  b. click Start, all programs, games.

  c. right-click on the game of hearts .

  d. Select Properties from the list.

  e. press the button find the target on the next window.

  f. right click on the highlighted file and select copy.

  g. then paste the copy on your desktop.

  h. right click on your desktop.

  i. Select Paste from the list.

  Step 2

  Finally, we will change the resolution for the game setting:

  a. right click on the game you just pasted on your desktop.

  b. Select Properties from the list and click the Compatibility tab.

  c. put the check box marked "run in 640 x 480 screen resolution.

  d. now whenever you want to play, click on that game on your desktop and it opens in mode full screen using the widest possible cards and numbers.

  Hope the helps of information.

• Front Panel does not properly

  Hello

  I have problems with some parts of my VI that I can't understand. The most important is that the elapsed time VI and Stop button not work properly on the front panel. Currently, the elapsed time don't go from 0, even if I want to count all the time, that the program is running and stop when the target time is reached. This is not the case. In addition, the stop button in the while loop does not stop at the VI to run. Why is this?

  Any help is appreciated!

  Well, if you get all the data to the serial port, you currently have a 10 second timeout.  So I think that your buttons are working, you just are not waiting long enough to see them act.

• VI front panel does not close when it is done executing, when this vi was called by reference.

  I created a simple vi set to indicate the problem I'm having. I run dynamically under vi to leave a main application. Simply the main application is my test exec and the Subvi I call dynamically is different tests. In the example I have write here the criterion vi is called Test electric 1(vi). I configured this electric Test 1 vi to see the front when it is called and close later while initially closed.  Problem is that it doesn't close before.

  Other things to keep in mind

  • I want to be able to run the vi test and do not wait until it is done.

  I'm using LabVIEW 2012 SP1.

  

  Basically the fence after that call questions only if the VI is called as a Subvi (as if you open you a VI and run it, it does not close when it's done).  Are two ways to work around this or have your app high lvl close the VI when it's done, it's explained here:

  http://digital.NI.com/public.nsf/allkb/987B2026B41BD39786256CF800032E8C

  or having your VI close when it's done.  A reference of the VI and the front panel: Close call node.

  I hope this helps.

• Front Panel does not (exactly 2 even while in flat sequence loop)? LabVIEW BUG?

  Hello world

  I have two while loop with exactly the same code and a user in each loop event structure,

  They both make the same thing which is too run until IMAQ image control (one line) click on a recording.

  I used a flat sequence to manage the order of execution.

  The problem is when I use only one single loop (put another in a diagram to disable) the façade answer perfectly and the program does what it should, but when I activate the two loops stuck in case of timeout...

  I do not understand what is happening that I can't do any activity of façade that would be registered, enclosed is a copy of the VI (you need NIVision run the vi).

  Any idea? Is this a bug or did I do something wrong?

  Thank you very much

  Best regards

  This isn't a bug, but the expected behavior. You cannot sequence structures event like this, they both need to be ready to react. Use a single event structure and a state machine architecture. You have about 4 copies of basically the same code of event management. Try to combine everything in one!

  What happens in your case?

  Answer: The two structures event will begin immediately queues of events, but the second event structure cannot respond to them because it is inaccessible due to data flow. In addition, the second structure of the event is set to "lock the front panel until the end of the event. Given that the event cannot end as explained above, the façade is locked up forever.

• I wonder to update and the updated Panel does not seem to connect to your server

  The Panel is repeated.
  Once I click on the button update moving blue line appears and nothing more and the minutes.
  Also the 'hide' button does not work

  If he has problems with the update or with the permissions then best is to download the full version and trash the version currently installed to do a fresh install of the new version.

  Download a new copy of the Firefox application and save the file to disk on the desktop image

  • Firefox 29.0.1: http://www.mozilla.org/en-US/firefox/all.html
  • Basket of the current application of Firefox (open the Applications folder in Finder and drag the Firefox application to the trash) to do a cleanup (re) install
  • Install the new version you downloaded
  • https://support.Mozilla.org/KB/installing+Firefox+on+Mac

  Your personal data are stored in the Firefox profile folder, so you will not lose your bookmarks and other data to personal when you uninstall and (re) install Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Front Panel does not work on my Qosmio x 305-701

  I m using vista 64 bit and my started Panel does not.

  Like the other problems with this model, I hear the beep when I touch the buttons FN keys work fine.

  My bios version is 1.70, the last one being for the moment.

  Toshiba Hardware Setup Utility, TOSHIBA Flash Cards Support utility is installed and running, but when I try to install the latest version of Toshiba value added for Windows Vista I get ID_ERR_NOTINSTALLVALZ_MESSAGE and not able to continue the installation.

  I tried to uninstall all of the Toshiba Utilities and try to install again but the same thing. I think 64-bit is not supported or something's wrong with her.

  Is there anyone else does in the face of this problem so far?

  Thank you all

  > I m using vista 64 bit and my started Panel does not.
  This means that he has worked in the past?

• Panel close? Event causes the front panel for not responding

  I am trying to create a simple program. Some time ago loop that generates random numbers, just so that I can see it is running. An "Exit" button is connected to an output of the while loop Terminal. The event structure is also in this loop, which intercepts "Close panel?" and don't know, then said of faithful son in the while loop output terminal. To be more precise, the output terminal takes an OR statement that takes the button leave and this Structure of Boolean event as inputs. When I run the program, the release button does not respond, however, with the highlight the part of structure of the program event execution seems to work. Sorry if I'm bad at explaining, any help is appreciated.

  I guess my real question is, how do correctly implement you that a button exit stops the loop and clicking on the red x or File: Close is ignored and rather does the same thing as your Exit button.

  The problem is that you don't have a case of timeout in the structure of your event, so he's sitting there, waiting for any registered event (in your case, the only recorded event is the closing of Panel event).  He reads your button to quit once, you should see if you run with execution highlighting.  The while loop can not continue until all that it ends and the structure of the event may not finish until an event occurs.

  A better solution than adding a timeout event is to add an event to change the value of the button exit.  Put the Quit terminal inside the case of the event and the wire which, in the same tunnel connected to stop the while loop.  If you do this there not need timer loop as the structure of the event will be sitting there waiting until the Quit button or Panel is closed.  However, if you want to add more code inside the while loop that will run continuously, then you will need a time-out event (that can take the place of waiting since the timeout will regulate the timing of the loop).

• The snippet Panel does not show in Dreamweaver CC 2014 - using Mac - why?

  It's weird - I used the extract workspace, the snippet panel shows not - not even if I try to open it via window-> extract.

  I've updated my Dreamweaver 2014 at the latest version.

  Can someone help me?

  I solved it myself.

  In the configuration file, there are folders named "workspace" and "WorkspaceMac".

  One that I have renamed in 'work-backup space' and the other to the 'workspace '.

  Now, it works perfectly!  Weird!

• Display settings have gone blurry while writing an email in Hotmail... Changing the resolution in the Control Panel does not work... Windows Vista SP11 Please Help

  Simple by typing in an e-mail and internet access, office, and all access to windows is fuzzy, impossible to return to the normal resolution.  Windows Vista not Windows 7

  Hello

  "Simple, typing in an e-mail and internet access, office, and all access to windows is blurred."

  It's not fair to Hotmail as your header States.

  Go to the website of your computer manufacturer > drivers download Section > then key in your computer model number > find your operating system > find two graphics / video or from the Chipset drivers and download and install.

  Then try to change the screen resolution.

  Or do a system restore to before that happened.

  http://bertk.MVPs.org/html/restoresysv.html

  If that fixed it, does not respect your graphics hardware

  See you soon.

• Try changing the settings of Vista firewall, but the configuration of the firewall Panel does not respond.

  I'm trying to access the port through the Windows Vista firewall.  When I open the firewall Panel and try to change the settings. The hourglass disappears and will not show the screen for changes.  So you can not close the firewall Panel.  Only way to get rid of it is to use the Task Manager and end task.  Any ideas?

  Hi wolfpackertom,

  Present on the computer some third party software may hinder the process.

  I suggest you try the following steps:

  The computer in the boot and a test

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Note: It is not recommended to fork or change options of windows firewall. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage from hackers and malicious software (such as worms).

  He may want to know:

  Understanding - Windows Firewall settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  What are the risks of allowing programs through a firewall?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-risks-of-allowing-programs-through-a-firewall

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Some features in the Control Panel does not start

  Original title: some feauters on Control Panel do not open

  my computer laptop OS is windows 8

  When I open my control panel functions are not open

  options, troubleshooting, customization of power

  Pleas give me a few tips, how can I do to fix

  Hello Kiran,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that some features don't not throw in Control Panel. I'll be happy to help you with your query. However, let me ask you a few questions to better understand the issue and assist you accordingly.

  1. What happens when you try to start the service, as said above?
  2. You receive an error message? If Yes, what is the exact and complete error message?
  3. You did any hardware/software specific change in the computer before the show?
  4. You use any third-party antivirus installed on your computer program?

  The issue may have been caused due to conflicts between third-party software. Try these steps and see if they help.

  Step 1: Start in safe mode

  With the parameters of Windows startup screen (formerly advanced startup options), you can start Windows in different advanced troubleshooting modes, so you can find and fix problems on your PC. In previous versions of Windows, you might get to the screen by pressing F8 before Windows starts. Windows 8 PCs starts quickly, so there is no enough time to press F8.

  See the article: Start settings for Windows (including safe mode)

  Step 2: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot in Windows

  N OTE: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  From now on, try the steps above and check that if these functions of launch and let us know the result so that the answers to the questions, we will be happy to help you further.

  Thank you.