FTP connection
Hello... I need to establish a connection with an FTP server to my app and download a specific file. I m new FTP in blackberry.how and which class to use?
There is no support for the FTP API, you must do so on a low level.
However, there are many ftp j2me applications, I think, some of them open source, which should give you a good starting point.
Tags: BlackBerry Developers
Similar Questions
-
Qosmio F30-117: Impossible to establish FTP connections
I have a Qosmio F30-117, windows XP, Norton Internet security.
When I try to FTP to my site I get FTP connection failed.I tried it on a friends computer and the connection has been established the first time.
When I joined my laptop to its broadband - no FTp connection. This eliminates at least my router.I tried to disbale parts of Norton Internet Security, without success.
Help?
Hello
so if I were you I would completely disable the Norton software and make sure that the Windows Firewall is to leave you hollow. If not, you should check if your friend has put in place properly. If you want to test that your machine is able to connect via FTP, then go to www.kernel.org and enter an ftp address.
Open your favorite FTP client, and then try to connect. If the connection fails really then double check all the settings and try again. I think that the problem is so low that everybody he oversees everything. ;)
Welcome them
-
Win 7 driver - data FTP connection error
I tried to download Windows 7 (32 bit) HP Deskjet and Officejet full feature software and drivers from the support link for my HP PSC 1402 for the past three days BUT get a "data connection error". Tried to do it from another PC and ISP and still the same problem... Anyone know of similar problems with the FTP server?
Due to the huge size of the driver that is nearly 370 MB and a lot of people trying to download it could have caused the problem.
Please try to download it from this link:
FTP://ftp.HP.com/pub/softlib/software11/COL30219/al-75052-1/AIO_CDB_NonNet_Full_Win_WW_130_141.exe
To use download managers that will help you have the best ftp connection. Here's one I like:
-
Save the site FTP connection information
I realized that I can record a MUSE site to the cloud Creative if I can share the maintenance of the site between my two computers. It works very well for if ensure that a site is kept synchronized between two computers. One thing that is not getting synchronized is the FTP information. At the present time I save a small .txt file in the CC with the .muse document the connection information is so convenient when I need to re - type.
Y at - it a trick or a trick to get the FTP connection information, stored in the .muse file, so I don't have to retype whenever I go to computers?
Hello
Please take a look at this discussion, it might answer your question
-
FTP connection refused with FTP client to open the port in the firewall ESX
Hello.
I just installed an esx 3.5 U4. We have an FTP server where we all night to make a copy of all our VM.
This ESX may not put the files in the FTP server... I open the FTP client port on the 'profile terms' - & gt; Firewall tab without problems and
I can connect with the FTP server... but... I can't do a LS for example, can I change to a different folder, I try with passive mode works... but
It does not work.
FTP server works well because other ESX work with her, and I do my windows XP with the same user/pass login and it works...
Any idea?
Thank you very much
Connected to 192.168.18.15 (192.168.18.15).
Welcome to 220 xxxxxxxx
Name (192.168.18.15:morado): vmbk
331 please specify the password.
Password:
230 login successful.
Remote system type is UNIX.
Using the binary mode to transfer files.
FTP & gt; Backup CD
250 changed Directory successfully.
FTP & gt; LS
227 entry Passive Mode (192,168,18,15,72,91)
FTP: connect: connection refused
FTP & gt;
Looks like the second TCP connection for file transfer (which is also used in the list of directories) from the client FTP on the server fell. Have you tried completely disabling the firewall with esxcfg-firewall - allowOutgoing (can try esxcfg-firewall - allowIncoming, although it should not be necessary in the passive FTP mode)? This command sets the iptables chains of ENTRY and EXIT to accept instead of the fall.
I tried esxcfg-firewall - e ftpClient and it worked fine for me.
You could also post your esxcfg-firewall OUTPUT string parameters - q.
-
Is it possible to have a secure FTP connection using private key authentication?
Is it possible to have a secure FTP connection using private key authentication to connect to a folder on Business Catalyst?
Hello
Not available at this stage that the only options are in the article to Setup SFTP.
- http://helpx.adobe.com/business-catalyst/partner/connecting-site-using-ftp-client.html
Kind regards
-Sidney
-
Lose the FTP connection after you put the computer to sleep
I usually work in Dreamweaver on my Macbook. However, if I'm working on a Web site and decide to stop for a while (it's how I closed my Macbook), everytime I open my Macbook again, so lost FTP connection. Sometimes it comes back after a long period of time, and other times I can do return disconnection/reconnection airport several times. But most of the time, I just closed Dreamweaver and reopen it. If I do this, the connection works perfectly again.
Does anyone know how to avoid to have to close and restart Dreamweaver in order to maintain the FTP connection after having put a Macbook to sleep?
The FTP queue time is set by your web hosting provider. I don't think DW has mechanisms in place to send empty commands to keep the connection alive, and even if it did, it would take the computer to be operational. You shouldn't have to restart DW well in order to get a connection. Simply by clicking on the login button in the files panel should do the trick.
-
. PPK files and secure FTP connections
Hello community!
I'm having some trouble in establishing an FTP connection in ColdFusion. The error message I get is "Invalid private key" and refuses the connection. Yes, "Invalid" is a misspelling it :-)
This is the code I use:
< cftry >
"" < PCTCT action = "open" connection = "MaConnexion" key = "\\server\web\retail\dir\privateKey.ppk"passphrase = "pass" safe = "yes" server ="sftp.server.com" port = "22" stoponerror = "yes" username = "theUsername" >
< cfcatch type = "any" >
< cfoutput >
< cfdump var = "#cfcatch #" >
< / cfoutput >
< / cfcatch >
< / cftry >I wonder what the problem is here! I'd appreciate REALLY all thougts!
My guess is that SFTP wants the key SSH format, something like this:
-
Mac user: pw of unregistered FTP connection
I tried this announcement to another topic which was published by a PC user, worry that he's going to be buried. I am a Mac user and having this same annoying FTP connection problem. I don't have IE7 (can't, thank you Microsoft) and had no problem in MX, that after the update to Studio 8. Have the 8.0.2 update without problems. Does not solve the problem. Murray, you're there. Help!Ok. It took me a few months to understand this, but I post this info for other Mac users who was struggling. The culprit is the keychain. Keychain is inhibiting the passwords of Dreamweaver. Don't ask me why... all I know is after I emptied the login Keyring (which was hidden, by the way), everything was restored to goodness and health and Dreamweaver works as it did formerly.
-
Copying files to target RT using Windows Explorer through FTP connection
I frequently transfer files from my cRIO to my desktop PC via a connection FTP through Windows Explorer. This method works well most of the time. However, if the file on the cRIO changes and I try to copy it again into my desktop PC, the old file is pasted to my office. I remember seeing the solution to this in the past (a browser setting or something) but for the life of me, I can't find this thread. At this point the only solution I know is to rename the file on the cRIO and then perform the transfer.
Does anyone know how to force Windows Explorer to recognize and copy only the most?
Thank you
Jeff
Don't know if this setting also effects Windows Explorer but it should work in Internet Explorer.
Change the cache forever setting search content updated at every visit to the page. To do this, click on Internet Options in the Tools menu in Internet Explorer, click settings on the general tab, click every visit to the page, and then click OK. For FTP, this forces the content to be downloaded again as a new copy rather than chosen in the cache.
-
What is an FTP connection?
Something has gone wrong with my computer and I am not able to restore. I use my Manitoba as my homepage, but it can not connect now. It seems that http is ok but the FTP is not. Can anyone help? What is FTP, and where can I find?
Looks like you have a Trojan horse (not identified).
What you need to do is to identify it. When it has detected MSE, it says?Until I have more information, all I can say is that this page has tons of useful information:A good combination for you to use is:RkillMiniToolBoxTDSSKiller (or FixTDSS)MBAMOnce you have identified the malicious program, can help this site (which has tons of very specific withdrawal guides):In addition, if you can't find a solution here, their forums are top of the line:In addition to the MMFA (run the FREE version! If you are given the opportunity to install a trial version, DO NOT do it!), I recommend the SAS portable scanner: -
I have a problem with the ACL I have FTP transmitted by PAT to an internal server on my border router. I have a pretty extensive ACLs that refuses the spider servers and some beaches I know senders of junk e-mail. The problem in FTP. When the ACL is applied to my external interface (fa0/1) I can not connect via FTP. When I drop the group access, I can connect to FTP a-okay. When the ACL is applied all my other services work as well (http on port 1337, ssh, PPTP, IRC and teamspeak - 9987 UDP). Here is my config. Any help will be highly appreciated:
Building configuration...
Current configuration: 6674 bytes
!
! Last configuration change at 11:07:17 PST Sunday, December 30, 2012, by admin
! NVRAM config last updated at 19:12:53 PST Sunday, December 30, 2012, by admin
!
version 12.4
horodateurs service debug datetime msec
Log service timestamps datetime msec
no password encryption service
!
hostname R1
!
boot-start-marker
boot-end-marker
!
enable secret 5 *.
!
No aaa new-model
clock timezone PST - 8
clock to summer time recurring CDT
no location network-clock-participate 1
No network-clock-participate wic 0
IP cef
!
!
!
!
IP domain name * *.net
IP-server names 4.2.2.2
inspect the IP log drop-pkt
property intellectual auth-proxy max-nodata-& 3
property intellectual admission max-nodata-& 3
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
user admin name secret 5 *.
!
!
!
!
!
!
!
interface FastEthernet0/0
Description main switch Port
IP 172.16.0.254 255.255.255.252
IP nat inside
no ip virtual-reassembly
Speed 100
full-duplex
!
interface FastEthernet0/1
Description Internet Port
DHCP IP address
IP access-group WANACL in
NAT outside IP
no ip virtual-reassembly
automatic duplex
automatic speed
!
router ospf 100
Log-adjacency-changes
passive-interface FastEthernet0/1
network 172.16.0.252 0.0.0.3 area 0
default information are created
!
IP forward-Protocol ND
!
!
no ip address of the http server
no ip http secure server
overload of IP nat inside source list 101 interface FastEthernet0/1
IP nat inside source static tcp 10.50.0.250 1723 interface FastEthernet0/1 1723
IP nat inside source static tcp 10.20.0.200 22 interface FastEthernet0/1 22
IP nat inside source static tcp 10.20.0.100 6667 interface FastEthernet0/1 6667
IP nat inside source static tcp 10.20.0.200 80 interface FastEthernet0/1 1337
IP nat inside source static udp 10.20.0.100 9987 interface FastEthernet0/1 9987
IP nat inside source static tcp 10.20.0.250 21 interface FastEthernet0/1 21
IP nat inside source static tcp 10.20.0.250 20 interface FastEthernet0/1 20
!
WANACL extended IP access list
Note * established connections permit *.
allow tcp any a Workbench
Note * Immediate deny forbidden beaches *.
----------------------------------------------------
* Lost prohibited beaches *.
----------------------------------------------------
Note * deny spiders *.
----------------------------------------------
* Ranges of Spider lost *.
-----------------------------------------------
Note * DHCP allow *.
allow udp any any eq bootpc
Note * specific permit ICMP *.
permit any any icmp echo response
Note * deny bogon beaches *.
deny ip 127.0.0.0 0.255.255.255 everything
deny ip 169.254.0.0 0.0.255.255 everything
deny ip 10.0.0.0 0.255.255.255 everything
deny ip 172.16.0.0 0.15.255.255 all
deny ip 192.168.0.0 0.0.255.255 everything
Note * allow all UDP traffic *.
allow a udp
Note * NAT services permit (recorded in SNMP) *.
permit tcp any any eq ftp log
permit tcp any any eq 1723
permit tcp any any newspaper of ftp - data eq
permit tcp any any eq 22 log
permit tcp any any eq 6667 newspaper
allow a gre
allow udp any any eq newspaper 9987
permit tcp any any eq 1337
refuse an entire ip
!
record 10.50.0.250
access-list 101 permit any one
access list 101 ip allow a whole
!
!
!
control plan
!
!
!
!
!
!
!
!
!
!
access controller
Shutdown
!
exec banner ^ C
WARNING: Unauthorized access to this system is prohibited and will be
pursued by the law. By accessing this system, you agree that your
actions can be monitored if you suspect unauthorised use.
^ C
connection of the banner ^ C
*************************************************************
WARNING - PRIVATE - ACCESS FORBIDDEN ELECTRONIC DEVICE
This device is a private network device. Access to this device is
not allowed. Any attempt of unauthorized access will be connected
and appropriate legal action will be taken.
*************************************************************
^ C
!
Line con 0
password 7 *************************************
Synchronous recording
local connection
line to 0
password 7 *************************************
Synchronous recording
local connection
line vty 0 4
password 7 *************************************
Synchronous recording
local connection
length 0
preferred transport ssh
line vty 5 15
password 7 *************************************
Synchronous recording
opening of session
preferred transport ssh
!
NTP-period clock 17180466
NTP 184.105.192.247 Server
!
end
is your server FTP active or passive?
ACL will change you accordingly. try to capture the transaction successful with FTP in wireshark and analyze the source and destination ports.
-
I'm having a problem with connecting to my ftp server. It has been tested to run on other computers, but on Windows, it cannot connect. Even with the firewall disabled, it still does not. Any ideas?
Hi Malcolmvolk,The question you posted would be better suited in the TechNet community. I suggest that you post the query in the link.Hope this information helps. -
Active FTP connections failure through a PIX 7.2.1
I have a PIX running version 7.2.1 and when users inside try to start connections to FTP FTP servers on the outside, they can do so only in passive mode FTP and not active FTP (port) mode.
What is the best way to solve this problem?
Thank you
Neal.
You have turned on ftp inspection? It seems that the inspection of ftp is turned off allowing passive to work but not active.
-
I created an FTP site for a client, clients use it to access the technical data. Some customers were confused about how FTP worked and for some reason any failed to implement ftp instead of WWW. So I did a simple web page with a hyperlink to the FTP site, which, in turn, opens the journal prompt. At this point, it will open in a new page with the, little familiar to most, directory display in Internet Explorer. And each user has their own login to access their files and only on their record.
So my questions are the following:
1. can I place the am real connection on the Web page to open the ftp authorization of passage through
2. instead of opening to the web browser ftp directory can it automatically be opened in the file Explorer? Not sure how this would affect Macs
Do not confuse people by giving them access to something they don't understand. Give them access protected by word of a download page with links that describe the documents they seek. This can be done simply with a database and a language such as PHP server-side. You could even provide a simple search tool.
Maybe you are looking for
-
Question about battery for Satellite U400 - 12 p
Hi all I have Satellite U400 - 12 p, battery is 3700mha, but on the Toshiba web site is the 4400mha standard, so it's true that on the website is the error? second problem, when working on battery (Vista Edition home premium x 86), the cpu still work
-
What is the input voltage max of the motherboard on Satellite 1110?
What is the maximum voltage for the motherboard in the Satellite 1110 please?Because my current cpu (1.5 ghz celeron) is 1.025 volts and I would like to change the processorsomething faster (cooling will be treated with btw XD)The only problem being
-
I am unable to find the 'run' which, according to the website of the game should be pinned to my button 'start '. Any ideas?
-
Hello Computer IHAVE toshiba laptop. Windows has instaltion redy on the laptop itray right now to download windows 7 from microsoft When I brief my serial key ihave messeg his doing IAM on my number key pleas help me for this
-
Hello;I really hope I get this resolved. I'm in the Oracle Enterprise of the R User Guide and1 ore.connect (), ore.push (), ore.sync (), ore.doEval works perfectly. However:2. ore.push () will not work if I have a date field in my dataframe3. ore.sav