FTP error. Cannot establish the connection.

Similar Questions

• Why cannot establish the connection.

  Hello
  I'm new to weblogic and jdeveloper and now I try to deploy FOD (http://www.oracle.com/technology/products/jdev/samples/fod/index.html) on a Linux Server (Jdeveloper runs on the same server), but can't connect to localhost. When I check the connection to 127.0.0.1 on port 7101, he always complains that:
  
  JSR-160 LENGTH tests... failed.
  Cannot establish the connection.
  JSR-160 DomainRuntime... skipped tests.
  JSR - 88... skipped tests.
  JSR-88-LOCAL... skipped tests.
  JNDI... skipped tests.
  JSR-160 tests edit... skipped.
  Tests of HTTP... success.
  Test server MBeans model... skipped.
  
  but the Web site: http://127.0.0.1:7101 / console are available, anyone know why?
  Thank you.

  You are not able to establish a connection between jdev and the right of the server. If so, you must add an entry with the ip address and the host name of the server in the host C:\WINNT\system32\drivers\etc\hosts file.

• When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  When I try to connect to my remote server the message "an ftp error occurred - cannot establish a connection to the host." How can I get the server to which to connect with dreamweaver?

  After spending most of the day on this I found that my password required to upgrade... so two of my sites are now meet Dreamweaver. And the other will be taken care by the owner of the Web site. Thank you, Nancy!

  gay

• An FTP error occurred - cannot establish a connection to the host. Internal data error. Unable to send data from network.

  Recently, I started out of the blue to get this message when I try to connect to an FTP of Dreamweaver. I have CC was last updated. I have like 50 sites, more on different servers and none of them will connect. So I don't know, it can't be a server problem. Yesterday, everything was fine. I made no change what so ever. I uninstalled Dreamweaver and reinstalled him and I get the same thing. It is not the site for 30 seconds and then exhale. As soon as I hit the button to connect as 1 second later, I get this error. I have reset all modems and routers, etc. I can't find anything online about this specific problem. I'm at my wits end. I have projects due, but cannot connect. It's Thanksgiving and trying to solve this problem instead of spending time with the family. Any help would be much appreciated.

  "An FTP error occurred - cannot establish a connection to the host." Internal data error. Unable to send data from network. »

  Nope, that is not the case, I have disabled this service and now it works fine!
  He was not the firewall, but the update 25-nov2014 of Norton Protection against vulnerabilities.  ! Norton is the note and fix it for the next update in the coming days...

  I have

  

• One of my sites always connects, but the other becomes had an ftp error cannot connect to the host.

  My problem is in "connect to remote server". I manage two sites in Dreamweaver CS6, and they are hosted by the same guy.  A site still connects fine, but it stopped connecting. With the second site when I click the button I get a delay then "an ftp error occurred - cannot establish a connection to the host".

  However, I can still access the second server in the remote site through an FTP program and support host confirms that my connection works very well from his computer.

  I tried to do with the old stuff (1) Site > Manage Sites > export to create an .ste file (2) completely, restart the management of Sites (3) > import the .ste file (4) click on connect to the remote server - But that made no difference

  The two sites are hosted by the same company does not mean that they are on the same physical server.  Your connection problem may be due to many things.

  • Username and password may have changed or been reset.
  • Server permissions problems (GoDaddy is known for this).
  • IP blocking.
  • Server is down.
  • etc...

  Are you able to connect with an FTP 3rd party like FileZilla client?  If this isn't the case, I guess it's a server problem & you will need to contact your host.

  Nancy O.

• Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari Version 6.1.6 (7537.78.2) fails to open certain websites. "Safari cannot establish a connection to the server.

  Safari - no support for third-party modules can cause Safari to suddenly quit, or have performance problems

  Safari does not load a page or webpage elements are missing

  Safari / other browsers - Web site does not

• Safari cannot establish a connection to the server

  I have try this site to opoen: https://www.infragrad org I get this error msg

  Safari cannot establish a connection to 'www.infragard.org '.

  all other web browsers work with this site no message.

  Certificates? or what else?

  IM using worm 6.2.8 in Mt lion

  If Safari says cant Safari't establish a secure connection

  https://support.Apple.com/en-us/HT204937

  You have antivirus software installed?

  If so, uninstall it.

• Error: A connection has been established with the server, but then an error occurred during the connection process.

  Hello

  I have MsSql running in the cluster environment and recently face the problem when there is a security agent installed in MsSql server, which the agent does nothing but only to capture the local database activity. The error led is as below:

  ID from step 1

  Server NIBKSQLCLUST

  Job name LSBackup_DRIB

  Newspaper log shipping backup job step name.

  Time 00:00:02

  SQL severity 0

  SQL Message ID 0

  Operator by e-mail

  Operator Net sent

  Operator paged

  Retries attempted 0

  Message

  2011-03-21 08:00:02.62 * error: could not retrieve parameters of backup for primary ID '26f46141-a676-41b2-8653-11f1b13de43a '. (Microsoft.SqlServer.Management.LogShipping) *.

  2011-03-21 08:00:02.63 * error: could not connect to the server NIBKSQLCLUST. (Microsoft.SqlServer.ConnectionInfo) *.

  2011-03-21 08:00:02.63 * error: a connection has been established with the server, but then an error occurred during the connection process. (provider: Named Pipes Provider, error: 0 - no process is on the other end of the pipe.) (.Net SqlClient data provider) *.

  2011-03-21 08:00:02.63 - END OF THE TRANSACTION LOG BACKUP-

  The process to run correctly when I turned off the security officer. Advice kindly the cause of this problem and is where all configurations should be set / changed in MsSql server.

  Thank you

  Boonlep coulibaly

  Hello

  I suggest you to send your request from the link and check.

  http://msdn.Microsoft.com/en-us/hh361695.aspx

  http://msdn.Microsoft.com/en-us/library/bb545450.aspx

• the iPhone via USB cable connection does not work. Error code 37 - cannot initialize the connection. Sombody has a solution? Thank you.

  See statement above. connect iPhone via USB cable. Error Code 37 - cannot initialize the connection.

  Ah, a famous Apple error. See: http://support.apple.com/kb/ts1275 and http://support.apple.com/kb/TS3125

• I/o error: the network adapter could not establish the connection: connection to oracle database

  Hello

  I am not able to connect to the Oracle SQL developer database. I said / 0 error: the network adapter could not establish the connection.

  I started the listener, but what I see is, it points to a different IP address instead of the IP address of the host. How to change the name of host or IP address.

  I see that it points to the host name in listener.ora.

  Attached the screenshot

  

  Can someone help me solve this problem?

  Thanks in advance

  What he says is the listener.ora file is not necessary to start the listener.  If you rename, then start the receiver, then start the db, after a minute or two, the db should automatically register with the listener and then you can make a tnsping or otherwise connect to the database through the listener.

  I'm not entirely sure what's going on with your image, but I can't help but wonder if somehow something is not what you expect with the investigation period, whenever it starts.

  So use lsnrctl status lsnrctl services to see what the listener is the situation and tnsping and ping from the client to see what he thinks.

• Muse in the preview is not working. Doesn't have a prior view. Cannot establish a connection over HTTP. How can I fix? Antivirus protection does not block. Firewall disabled

  Muse in the preview is not working. Doesn't have a prior view. Cannot establish a connection over HTTP. How can I fix? Antivirus protection does not block. Firewall disabled

  Sorry I forgot to paste the link in the previous answer,

  Here's the link - Preview fails in muse

  Kind regards

  _Ankush

• IO error: the network adapter could not establish the connection

  I'm configuration 11.1.2.3 on Windows 2008 using the Oracle database and when I try to configure connection services database and shared registry associated with the House I get the error "IO error +: the network adapter could not establish the connection +" all by filling in the details of the database. Windows Firewall is disabled, database is able to connect through SQL Plus am running, listening for the database service is running and the name of SID and the server have been provided properly. I even used localhost, apart from the name of the server providing the servename and ORCL is the SID. Any suggestions please?

  Usually, if I install on a Virtuelle/portable Windows machine that does not have a fixed IP or a dns entry I install a card closure before installing Oracle and have never had problems, it is established in http://docs.oracle.com/cd/E11882_01/install.112/e24186/reqs.htm#BABFHCJG

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• CS5 I get "and FTP error produced - can not connect to the host."

  CS5 I get "and FTP error produced - can not connect to the host." Your login or password is incorrect. Please check your login information. I work with three sites. One of them connects fine, but two of them get this message - and I am well aware that the user name and password are correct on each of them. Can anyone help?

  Call your host.

  Nancy O.

• ASP - function Remote - error: cannot run the trigger

  Hello

  I tried to get my macros being run by a remote server.

  It's my function file remote named "remote_test_pc.asp":

  framework integrated; then

  conf t

  interface $INTERFACE

  Description macro $TRIGGER

  PC-VoIP-Port Description

  switchport access vlan $ACCESS_VLAN

  switchport mode access

  switchport vlan voice $VOICE_VLAN

  broadcast storm control level 1 k pps

  multicast storm-control level 2 k pps

  Storm-control action trap

  no event log status link

  bandwidth share SRR-queue 10 10 5 75

  form of bandwidth SRR-queue 10 0 0 0

  priority queue

  MLS qos trust dscp

  no link-status of snmp trap

  spanning tree portfast

  spanning tree enable bpduguard

  service-policy input PO_TRUST-PHONE

  output

  end

  FI

  framework integrated; then

  conf t

  interface $INTERFACE

  No description of macro

  Description by DEFAULT-CONFIG

  switchport mode access

  switchport access vlan 999

  broadcast storm control level 1 k pps

  multicast storm-control level 2 k pps

  Storm-control action trap

  spanning tree portfast

  No switchport voice vlan $VOICE_VLAN

  bandwidth share SRR-queue 10 10 5 75

  form of bandwidth SRR-queue 10 0 0 0

  priority queue

  MLS qos trust dscp

  no service-policy input PO_TRUST-PHONE

  FI

  output

  end

  FI

  And this is my config on the switch to mac-group and the macro:

  !

  macro auto Test group address-mac-PC

  Mac 0019.9990.5509 address list

  !

  comprehensive treatment of the auto macro

  macro auto control global detection mac address

  !

  automatic macro execution Test-PC remote ftp://192.168.1.11/remote_test_pc.asp ACCESS_VLAN = 123 VOICE_VLAN = 127

  !

  When I plug this workstation for the following syslog messages:

  Switch #.

  Remote_test_pc.asp loading!

  [OK - 1702/4096 bytes]

  Enter configuration commands, one per line.  End with CNTL/Z.

  Switch con0 is now available

  Press RETURN to get started.

  Error: Cannot run the trigger Test-PC, please check trigger exists and corresponds to the valid function

  26 September 11:45:37.755: % SYS-5-CONFIG_I: configured from console by console

  26 September 11:45:37.772: % AUTOSMARTPORT-5-INSERT: tty0(user id:): dispositif avec adresse mac 0019.9990.5509 détectées sur l'interface FastEthernet0/3, exécuté le Test-PC) Message

  Switch #.

  The port works as it should, but I wonder about the error message.

  The switch is 2960 with IOS 12.2 (58) SE2.

  Can someone explain what this means?

  Thank you very much!

  Sven

  Hi Sven,

  I think that you are not constantly getting this message... Ignore it for now... That have no functional impact... This has been supported in 15.0 (1) SE.

  Thank you

  Ankur-

• The network adapter could not establish the connection using the external ip address

  Hi team,

  Please look in the attached files.

  I installed db 11g on my desktop machine (Windows 7, with a local network) and then I created a data source connection in tomcat which was also in the same system and then I deployed my sample web application, everything works fine, I am able to access web applications.

  But once that I kept my system with external IP address (excluding local network of my company), oracle gives these following errors when tomcat start

  Here is the following URL will display the error during the startup of tomcat.

  The network adapter could not establish the connection,

  In these two files, listener and tnsnames ora ora, need to change the configurations if I change the Ip address of the system?

  even I tried my address keeping external Ip instead if host in these two configuration files, yet this does not work.

  any help would be greatly appreciated!

  Thank you.

  Because as I explained - your listener is listening on localhost only. localhost is never accessible to another machine.

  Stop your listener, change the listener.ora to listen to on the real machine name and start the receiver.

  In addition, your tnsnames.ora points to localhost...

  Stop using localhost, unless you only want things to work on the same machine.