Fulfillment Server - what is it and do I need?

Similar Questions

• What is Silverlight, and do I need.

  What is Silverlight, and do I need?  Running an old computer with XP.

  Silverlight is an attempt by Microsoft to compete with Flash.  You need Silverlight only if you want to display the "multimedia" created with Silverlight, which are as far as I know on the Microsoft Web sites.

  http://www.Microsoft.com/Silverlight/what-is-Silverlight/default.aspx

• How do I know what software updates and driver, I need?

  Hi all

  For the first time posting here so I hope that I asked this question in the appropriate forum.

  I have just bought myself a nice shiny new computer HP laptop Pavilion dv7-3020sa - Windows 7 64 bit.

  I've been on the HP software and driver downloads page and I'm confused as to which updates (if any) that I need.

  Is it possible to know what are the current versions of the software and drivers, I already have on my laptop, so I don't download and install older versions than those currently installed?

  So far, I only did the BIOS update.

  Best regards, Chris.

  Jeff,

  Thanks for all your help and information.

  I'll keep HP Support Assistant, for now.

  I don't know if it's just me, but my laptop does not seem to start more quickly after removing the HP Advisor and Hp Update.

  He saved the little hard drive space too.

  Best regards, Chris.

• What is mfenlfk and do I need

  I've removed my computer with mcafee, but have still mfenlfk on my hard drive do I need or I can hit it and how?

  Run the tool to remove McAfee from here: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe
  (from: http://service.mcafee.com/FAQDocument.aspx?lc=1033&id=TS101331)

• I use Windows Vista and that you need to download SQL Server 2005 Express Service Pack 4. I get an error code of 64 C. Please tell me what to do?

  I use Windows Vista and that you need to download SQL Server 2005 Express Service Pack 4. I get an error code 64 C help, please.

  Hello

  I suggest you to try the steps below and check if it helps.

  Method 1: Try to reset components to update Windows from the following link, which would help you to install the updates of windows. http://support.Microsoft.com/kb/971058

  Method 2: If the problem persists, then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: Also try to install the updates manually from the link below.

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=184

  You can also consult the following link for more information:

  Troubleshoot problems with installing updates.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Hope this information is useful.

• If Server 2003 sbs spoil, 2003 standard server can take over and become the primary server?

  If Server 2003 sbs spoil, 2003 standard server can take over and become the primary server?

  Windows Server 2003 SBS is our 'old Machine '.
  Windows Server 2003 R2 Standard will be our "new extra Machine.
  = 2 different machines

  1. can I install additional Windows Server 2003 R2 Standard to an existing Windows Server 2003 SBS as backup domain?

  2. given my Windows Server 2003 SBS is an old machine, keep crash or auto restart or if existing Windows Server 2003 SBS unable to start, spoil, a new Server Windows 2003 Standard R2 can take on the domain controller, and becomes the principal server?

  3. after my old fixed my Windows Server 2003 SBS, can join Windows Server 2003 Standard R2 domain?

  4. you have any side effect or the limitation of SBS and Server Standard on working together in 1 area?

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  Windows Server general forum:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Concerning

• My 6 to 4 adapter has disappeared - what it is and where can I get it?

  For some reason, my 6to4 adapter is missing.   What is this and how can I download it?  Would appreciate any help.

  Hello

  Don't you worry about this unless you have found errors. If so see these threads.

  http://social.answers.Microsoft.com/forums/en/w7network/thread/754c8f29-3a87-4E77-Babd-a69c8910e17e

  http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/05a8849e-89c1-4CC9-8004-f6d07a4fdf8b

  http://www.cableforum.co.UK/Board/34932105-post6.html

  ====================================

  A new Microsoft 6to4 map is created unexpectedly after restarting Windows 7 or Windows
  Server 2008 R2
  http://support.Microsoft.com/kb/980486

  How to disable certain Internet Protocol version 6 (IPv6) components in Windows Vista, Windows 7
  and Windows Server 2008
  http://support.Microsoft.com/kb/929852/en-us

  Response of Lionel Chen
  http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  I get the error message "HTTP not found" and "SMTP." not found What is this and how can I fix it please?

  If you try to send or receive messages, you may receive an error message similar to the following error message, which indicates that your Post Office Protocol version 3 (POP3) or host SMTP Simple Mail Transfer Protocol () is not found:

  The host hostname is not found. Please check that you have entered the server name correctly. Account: AccountName, Server: servername, Protocol: POP3, Port: secure (SSL): no, error 11001, error 0x800CCC0D Socket number

  In addition, you cannot ping or establish a Telnet connection to the mail server.

   
  This problem may occur if you have the firewall from Zone Labs such as ZoneAla software...
  This problem may occur if you have firewall software from Zone Labs such as ZoneAlarm or ZoneAlarm Pro, installed on your computer. These programs may prevent communication with your e-mail server.

  RESOLUTION

  To resolve this problem, remove the software firewall from Zone Labs of your compu...
  To resolve this problem, remove the firewall from Zone Labs of computer software. To do this, see the program documentation or contact Zone Labs at the following of Zone Labs Web site for more information:

  http://www.zonelabs.com/services/support.htm (http://www.zonelabs.com/services/support.htm)

  MORE INFORMATION

  For more information about ZoneAlarm or to contact Zone Labs, see what follows...
  For more information about ZoneAlarm or to contact Zone Labs, see the following Web of Zone Labs Web site:

  http://www.zonelabs.com (http://www.zonelabs.com)

  For more information on how to resolve a similar error message when you use Microsoft Outlook on a computer that is configured as an ICS Internet (ICS) client, click on the number below to view the article in the Microsoft Knowledge Base:

  252322 (http://support.microsoft.com/kb/252322/EN-US/) OL2000: (CW) Error Message: The Server could not be found using ICS Connection

  For more information on how to solve an error similar to Microsoft Outlook Express and ZoneAlarm, click on the number below to view the article in the Microsoft Knowledge Base:

  274456 (http://support.microsoft.com/kb/274456/EN-US/) error finding POP3 or SMTP servers when you send or receive e-mail Messages

  The third-party products that are discussed in this article are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  later ducdive

• I can't turn on my windows Defender. When I try I get a message came 'Set Association Control Panel leader' what this means and how do I do it please

  My windows Defender is disabled. When I try to turn it on, I get a message saying "Set File Association Control Panel" so I can't turn on.what does this way please. ?

  Hello

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial:

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this FREE program Autoruns:

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• 'Test latency error' what it means and how to fix it.

  I've tried to do a test of broadbandspeed and in the attempt, I was told, there was error, namely "latency test. -What it means and how to fix it?

  Was it speedtest.net?

  If so, this see from their base of knowledge ( https://support.speedtest.net/entries/21544197-What-does-Latency-Test-Error-mean- ):

  «"Latency Test error" occurs generally when the server has been temporarily interrupted.» We have a server monitoring group that will be contacted periodically servers to verify that they work correctly, but there may be a slight delay before automatically recognize us that the server is down. Please let us know by filing a support ticket specifically identify which server caused the error and try to test it on another server. »

  If it was of speedtest.net, then try another Tester like http://www.zdnet.com/broadband-speedtest/ for example (there well others).

• I have Adobe Reader DC, but have just started to give a message that Adobe is unable to connect to the DDE server, what can I do?

  I have Adobe Reader DC, but have just started to give a message that Adobe is unable to connect to the DDE server, what can I do?

  Hi johnf49911817,

  * Try the solutions below: -.

  Solution 1) (this error occurs when you have more than 1 process of Acrobat running)

  (1) go to the task by pressing Ctrl + Alt + Del Manager

  (2) go to the process in the Task Manager

  (3) terminate all processes associated with Acrobat

  (4) start Acrobat again.

  Solution 2) open Acrobat access to menu help & repair installation.

  Solution 3) control the association of file on your system.

  Solution 4) course for HKEY_CLASSES_ROOT\acrobat\shell\open\ddeexec\application and replace the key 'AcroviewA11' 'AcroviewR11.

  Kind regards

  Christian

• After update of 38.1 a few minutes ago a new Asterisk just started appearing after mailboxes mailbox. What is - this and why it was created?

  I've just updated to version 38.1 at a few minutes ago. As soon as I open the program after the update, two of my boxes have (* 1) and (* 2) after the name of the box. What is it and why is it done? How can I disable this if this is a new feature?

  A thought more...

  If you leave all your boxes to the extended letters (for example, you click on arrowheads you see all subfolders) and leave them like that, you won't see those * once again.

  Might be easier to go back to the previous version...

• I'm Mac 10.10.5. Always deleting my AVIRA virus protection application. EMIX files... What do these and I should delete?

  I'm Mac 10.10.5. Always deleting my AVIRA virus protection application. EMIX files... What do these and I should delete?

  Uninstall Avira, it's not better than the malware itself.

  https://www.Avira.com/en/support-for-Business-Knowledgebase-detail/kbid/1242

  There are no viruses that can attack Mac.OS X. For example, anti-virus programs are selling a cure for a disease that does not exist. And they are known for the Mac was systems.

  A Mac peut picking up malware, but not if you just use common sense. Really need to actively invite some malware in for making it happen. This means that download and knowingly give your password for it to download. Mac offers all the protection you need with SIP (Protection of the integrity of the system). I have on the Protection of the integrity of system on your Mac - Apple Support

  If you happen to download adware, you can use MalwareBytes to get rid of it. Malwarebytes was developed by one of our colleagues here to ASC. He received rave reviews and is on the more proven anti-malware for Mac software.

  Safari pop ups are different and easier to deal with. In Safari 9.1 and later simply close the window. For previous versions force quit and hold the SHIFT key while restarting Safari.

  https://support.Apple.com/en-us/HT203987

  Finally, away from programs that are intended to «clean your Mac» They can do damage to your system. Your Mac should any in the first place of cleaning. Any necessary cleanup is systematically supported by OS X.

• In preferences-saved passwords for Chrome://weave (Services of Mozilla password) and Mozilla Services Encriptación Passphrase) what are these and are they necessary?

  In preferences-saved passwords for Chrome://weave (Services of Mozilla password) and Mozilla Services Encriptación Passphrase) what are these and are they necessary?

  If you define a sync and create a new account to sync or connect to an existing synchronization account then Firefox stores the credentials (name, password and key Sync) in password manager to allow to connect to this account when you start Firefox.
  If you remove these entries in password manager then sync will stop working and you will have to set up the synchronization again.

  • https://support.Mozilla.org/KB/what-Firefox-sync
  • https://support.Mozilla.org/KB/how-do-i-set-up-Firefox-sync
  • https://support.Mozilla.org/KB/how-do-i-manage-my-Firefox-sync-account

• My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do?

  My Icloud account does not work. As soon as I try to connect my PC know "this browser is not supported. What went wrong and what can do? I previously used the same connection to my account for a long time without any problem. My PC I have a tie with Windows 8

  < personal information deleted by host >

  Hi bengtfrombelgentier,

  Welcome to the communities of Apple Support! I'm sorry to hear that you are experiencing these problems access iCloud. If you are unable to access iCloud.com due to an error of supported browser, you can check the browser requirements set out in the following article:

  Requirements for iCloud - Apple Support

  Concerning