Full backup of DB with RMAN

Similar Questions

• RMAN how to handle simple full backups every day with the archivelogs

  
  

  
  

  Hello

  My use of Oracle DB is about 200 GB on a file system 1 TB from a NetApp file server. (i.e. 20% currently use)

  I'm not so attracted to use the RMAN catalog for the love of simplicity.

  Also, I have an affinity to run a full backup "Instant NetApp" every day, without running all the incremental backups.

  My snapshots of NetApp have a framework for the retention of 7 days.

  I think to implement a RMAN full backup script that includes the following to run every night:

  Run {}

  delete archivelog all;                    (to clean up the archive logs that are accumulated for each day)

  backup database;                          (for a full backup every night)

  }

  This will be a good idea?

  Will this coverage to back up all that I could restore if there is a problem.

  
  

  Part of the great mystery for me is on the restoration of the data that is generated during the execution of the "backup database" command in the RMAN.

  Any advice would be appreciated.

  Thank you!

  -Steve

  If you perform the backup in this order, you will get in big trouble.

  It is preferable to run the backup as follows:

  (1) the following parameters, you have to do only once:

  configure backup optimization

  Configure retention policy to recovery of 7-day window;

  Configure controlfile autobackup on;

  (2) backup every day:

  backup database more entered archivelog delete;

  delete noprompt obsolete;

  unrecoverable report;

  RMAN automatically takes care of cleaning the old backups<7 days="" and="" saved="">

  Concerning

  Patrick

• With rman recover DB to old registrants after cool recovery?

  Hello
  1.I have done the complete backup of DB with RMAN.
  2. ... Cause that DB was be inserted/updated / delete, so away.
  3.I could recover (cool) shutdown DB.
  4. ... Cause that DB was be inserted/updated / delete, so away.
  5 but now I want to recover DB for step 1. Still to my drive, but the cool backupset backupset have been removed.
  
  Q: if I could make this work? But the backup from the list is set to zero.
  
  Thank you.

  A ' SHOW ALL '; RMAN (with the database mounted - that is to say access a controlfile) would be useful. The lines "CONFIGURE CONTROLFILE... "show your controlfile autobackup configuration.

  no record in the recovery area

  Maybe you don't have AUTOBACKUP configured for the FRA but somewhere else. See also, if controlfile save is in $ORACLE_HOME/dbs

  Note: default 'RESTORE CONTROLFILE FROM AUTOBACKUP"would restore the last backup of controlfile. Since you need an older backup, you must move the new backup controlfile so that RMAN does not read them.

  You can also explicitly "RESTORE CONTROLFILE FROM"locationofbackuppiece "";

  [See the RESTORE command reference | http://download.oracle.com/docs/cd/B19306_01/backup.102/b14194/rcmsynta051.htm#sthref796]

  Hemant K Collette

• Full backup to optimize backup RMAN

  Hi gurus,

  I wanted to implement the functionality of rman backup optimization. I did a little test to verify its use and not found helpful whenever I do a full backup to backup all data files and nothing is ignored.

  According to the ORACLE notes as below, ideally, once I backup the database, the backup else should jump not all files.

  
  

  If you enable Backup Optimization and then the BACKUP command ignores backup files when the identical file has already been saved on the specified device type.

  
  

  Please note that it's my test server and no connections are on the DB. Listener is broken. If no point of change Yvert. I'm missing here something?
  

  Oracle - 11.2.0.4 version

  RMAN > run

  2 > {allocate channel ch1 type

  3 > disc format ' / oraback/RMAN/%d_DB_%u_%s_%p';

  4 > backup database;

  {5 >}

  allocated channel: ch1

  channel ch1: SID = 172 type device = DISK

  From April 28, 15 backup

  channel ch1: start the backup set full datafile

  channel ch1: specification-datafile in the backup set (s)

  Enter a number of file datafile = 00001 name=/u01/oradata/nmsdata/system01.dbf

  Enter a number of file datafile = name=/u04/oradata/nmsdata/NMSINFO_DATA01_02.dbf 00006

  Enter a number of file datafile = 00005 name=/u04/oradata/nmsdata/NMSINFO_DATA01_01.dbf

  Enter a number of file datafile = name=/u03/oradata/nmsdata/NMSINFO_INDX01.dbf 00007

  Enter a number of file datafile = name=/u01/oradata/nmsdata/undotbs01.dbf 00003

  Enter a number of file datafile = name=/u01/oradata/nmsdata/sysaux01.dbf 00002

  channel ch1: from room 1 to 28 April 15

  channel ch1: finished piece 1 at 28 April 15

  total, handle = / oraback/RMAN/NMSDATA_DB_ngq5g2vv_71408_1 tag = comment TAG20150428T042431 = NONE

  channel ch1: complete set of backups, time: 00:00:25

  channel ch1: start the backup set full datafile

  channel ch1: specification-datafile in the backup set (s)

  Enter a number of file datafile = name=/u01/oradata/nmsdata/users01.dbf 00004

  channel ch1: from room 1 to 28 April 15

  channel ch1: finished piece 1 at 28 April 15

  total, handle = / oraback/RMAN/NMSDATA_DB_nhq5g30o_71409_1 tag = comment TAG20150428T042431 = NONE

  channel ch1: complete set of backups, time: 00:00:01

  Backup finished April 28, 15

  From control file and SPFILE Autobackup 28 April 15

  room handle=/opt/app/oracle/product/11.2.0.4_ee/dbs/c-3349937142-20150428-00 comment = NONE

  File control finished and Autobackup SPFILE to 28 April 15

  output channel: ch1

  RMAN > show all.

  RMAN settings for database with db_unique_name CHNMCPRDB1_NMSDATA are:

  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;

  CONFIGURE BACKUP OPTIMIZATION # by default

  SET UP DEFAULT DISK DEVICE TYPE; # by default

  CONFIGURE CONTROLFILE AUTOBACKUP ON;

  CONFIGURE CONTROLFILE AUTOBACKUP FORMAT FOR DEVICE TYPE DISK TO "%F"

  SET UP THE DEVICE TYPE DISK PARALLELISM 1 BACKUP BACKUPSET TYPE; # by default

  CONFIGURE BACKUP OF DATA TO DISK FILE TYPE DEVICE TO 1; # by default

  CONFIGURE BACKUP ARCHIVELOG FOR DEVICE TYPE DISK TO 1; # by default

  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT 1 ' ${backup_dir}/${ORACLE_SID}/%d_t%t_s%s_p%p';}

  CONFIGURE CHANNEL DEVICE TYPE DISK FORMAT ' / oraback/RMAN;

  CONFIGURE MAXSETSIZE TO UNLIMITED; # by default

  CONFIGURE ENCRYPTION OF DATABASE # by default

  CONFIGURE THE ENCRYPTION ALGORITHM "AES128"; # by default

  CONFIGURE COMPRESSION ALGORITHM 'BASIC' AND 'DEFAULT' LIBERATION OPTIMIZE FOR TRUE LOAD; # by default

  CONFIGURE THE NONE ARCHIVELOG DELETION POLICY; # by default

  CONFIGURE SNAPSHOT CONTROLFILE NAME TO ' / tmp/nmsdata_snapshot_arch.ctl ';

  RMAN > set UP OPTIMIZATION BACKUP;

  new RMAN configuration settings:

  CONFIGURE BACKUP OPTIMIZATION

  new RMAN configuration settings are stored successfully

  RMAN > run

  {allocate channel ch1 type

  disc format ' / oraback/RMAN/%d_DB_%u_%s_%p';

  backup database;

  }

  2 > 3 > 4 > 5 >

  allocated channel: ch1

  channel ch1: SID = 172 type device = DISK

  From April 28, 15 backup

  channel ch1: start the backup set full datafile

  channel ch1: specification-datafile in the backup set (s)

  Enter a number of file datafile = 00001 name=/u01/oradata/nmsdata/system01.dbf

  Enter a number of file datafile = name=/u04/oradata/nmsdata/NMSINFO_DATA01_02.dbf 00006

  Enter a number of file datafile = 00005 name=/u04/oradata/nmsdata/NMSINFO_DATA01_01.dbf

  Enter a number of file datafile = name=/u03/oradata/nmsdata/NMSINFO_INDX01.dbf 00007

  Enter a number of file datafile = name=/u01/oradata/nmsdata/undotbs01.dbf 00003

  Enter a number of file datafile = name=/u01/oradata/nmsdata/sysaux01.dbf 00002

  channel ch1: from room 1 to 28 April 15

  channel ch1: finished piece 1 at 28 April 15

  total, handle = / oraback/RMAN/NMSDATA_DB_njq5g509_71411_1 tag = comment TAG20150428T045849 = NONE

  channel ch1: complete set of backups, time: 00:00:25

  channel ch1: start the backup set full datafile

  channel ch1: specification-datafile in the backup set (s)

  Enter a number of file datafile = name=/u01/oradata/nmsdata/users01.dbf 00004

  channel ch1: from room 1 to 28 April 15

  channel ch1: finished piece 1 at 28 April 15

  total, handle = / oraback/RMAN/NMSDATA_DB_nkq5g512_71412_1 tag = comment TAG20150428T045849 = NONE

  channel ch1: complete set of backups, time: 00:00:01

  Backup finished April 28, 15

  From control file and SPFILE Autobackup 28 April 15

  piece handle=/opt/app/oracle/product/11.2.0.4_ee/dbs/c-3349937142-20150428-01 comment = NONE

  File control finished and Autobackup SPFILE to 28 April 15

  output channel: ch1

  RMAN > exit

  LANCERIQUE wrote:

  Hi Tom,

  Well well, then that contradicts what oracle mentioned in the docs?

  Not at all.  It does that contradict your understanding of what constitutes a data file "changed."

  Also, I pulled data backup and not backup tablespace.

  Is not serious. The principle is the same.

  Also check your statement my understand that if there are 100 files of data and rarely used, Yvert will be updated for each of them?

  If they are not unalterable, then Yes.  That's how oracle ensures consistency between the data files.

  Kind regards

  Nikhil Mehta.

• How to make a backup of the database with RMAN Oracle Single Instance

  People,

  Hello. I use the server of Oracle 11 GR 1 material with operating system Oracle Linux 5.10 database.

  I understand how to back up the database instance in SQL Server with Windows. But do not really understand how to back up the database instance in Oracle on Linux.
  I did it cold and hot backup for the database HRCS90 instance, but both receive the same error message.

  
  Cold backup is below:

  SQL > startup
  ORACLE instance started.

  Total System Global Area 538677248 bytes
  Bytes of size 2146024 fixed
  528482584 variable size bytes
  4194304 buffers of data bytes
  Redo buffers 3854336 bytes
  Mounted database.
  Open database.

  
  SQL > shutdown immediate
  The database is closed.
  The database is dismounted.
  ORACLE instance stops.

  
  RMAN > backup database;

  From backup 25 November 13
  using the control file of the target instead of recovery catalog database
  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-03002: failure of the backup command to the 25/11/2013 14:26:52
  RMAN-06171: not connected to the target database

  
  RMAN > backup HRCS90

  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, as, backup backupset, blocks, channel, check, copy, copies, controlfilecopy, cumulative, current, basic data, datafile, datafilecopy, device, diskratio, db_recovery_file_dest, db_file_name_convert, duration, filesperset, for, format, from, full, strength, file, incremental, keep, (, maxsetsize nochecksum, noexclude, nokeep, not, proxy, pool, re-use, recovery, section, skip). ', spfile, skip readonly, setsize, tablespace, tag to validate.
  RMAN-01008: the identifier of the AfDB was: HRCS90
  RMAN-01007: line 1 column 8 file: entry standard

  
  RMAN > backup database HRCS90

  RMAN-00571: ===========================================================
  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
  RMAN-00571: ===========================================================
  RMAN-00558: error occurred during parsing of order entry
  RMAN-01009: syntax error: found 'distinctive sign': expected an of: ' archivelog, auxiliary, backupset channel, copy, controlfilecopy, backup, common, base data, data file, datafilecopy, remove, diskratio, db_recovery_file_dest, filesperset, format, force, file, include, keep, (, maxsetsize, noexclude, nokeep, not, pool, more reuse, recovery, section, skip, spfile, pass readonly, setsize, tablespace, tag, to).
  RMAN-01008: the identifier of the AfDB was: HRCS90
  RMAN-01007: line 1 column 17 file: entry standard

  While the instance of database HRCS90 is starting, I do hot backup by using the same commands and get the same error message with above cold backup.

  My question is:

  Can any folk tell me specific steps (order by order) to back up a single instance of the database in Oracle with RMAN?

  
  Thank you.

  Yes, you can restore and recover the backup, but not at the moment. You will only be able to restore and recover at the time of your backup.

  For example.

  If you take backup (mount point with no mode of journal archive) at 06:00 and your grave database crashes at 21:00, you will be able to restore and recover until 06:00. You will find all the changes made to the database between 06:00 and 21:00.

  If you want your database to recover until 9 PM or until a point in time, then you must put your database in log mode archive, and then save the archives.

• RMAN full backup - size SPFile Total 0.00 K

  Hello, I do some tests and I need help to understand if there is something wrong in what I'm trying to do (a full backup with RMAN, DB is 11 GR 2).
  
  If I perform a simple full DB Backup, all past file and it completes successfully. No errors.
  
  Controlfile Autobackup is enabled, so I expect to find the control file and SPFile included in the backup, too.
  
  But if I go to Console 'EM-> availability-> backup reports
  
  It is reported the following:
  
  ---
  Entry summary
  
  Data file
  Backup files 8
  Separate files 8
  Tablespaces separate 7
  Total size 11.16 G
  More former Checkpoint time Aug 29, 2011 01:00:29
  Most recent Checkpoint time Aug 29, 2011 01:04:37
  
  Control file
  Backup files 1
  Separate files 1
  Total 22.95 M size
  More former Checkpoint time Aug 29, 2011 01:05:44
  Most recent Checkpoint time Aug 29, 2011 01:05:44
  
  SPFile
  Backup files 1
  Separate files 1
  Size total 0.00 K
  More old time change Aug 29, 2011 01:02:12
  Last Modification time Aug 29, 2011 01:02:12
  ---
  
  
  Looks SPFile size on backup is '0' and not what I was expecting (SPFile is actually being used and it is not empty).
  
  Should what kind of verification I do to see if everything is OK? Maybe a non-destructive.
  
  Thank you very much!

  Hello R,

  (1) the SPFile will be restored in a custom location / name of my choice ("spfile_restore.ora")
  which may be different from the ACTIVE SPFile

  I would say that must be different from the current spfile...

  (2) the SPFile ACTIVE will always be in place and will always be that "in use" even after restoring

  Correct the restored spfile will not be part of any oracle process.
  Kind regards
  Tycho

• Two questions relating to the archive redo logs with RMAN backup

  DB version: 11g
  
  I am new to RMAN.
  
  My database is in ARCHIVELOG mode. I intend to make a weekly backup for my db (02:00 every Monday). There will be all the incremental backups between these windows(Monday-to-Monday) of backup that I have would function for retrieving archived redo logs.
  
  
  Question1.
  I want to save the archived logs every day (for example at 23:00). How can I configure that?
  
  These are the configuration setting, that I intend to implement. I don't know how to set up the archive log backup
  

  configure default device type to disk;
  configure retention policy to redundancy;
  configure device type disk parallelism 1;
  configure channel 1 device type disk clear;
  configure channel 2 device type disk clear;
  configure channel 1 device type disk format '/u05/rman1/datafiles/rmnabackup1_%U';
  configure channel 2 device type disk format '/u05/rman2/datafiles/rmnabackup2_%U';
  configure controlfile autobackup on;
  configure controlfile autobackup format for device type disk to '/u05/rman1/control_files/rmnabackup1_%U';

  Question2.
  After that a new full backup is taken at 02:00 on Mondays, the archived redo logs accumulated since the last 7 days become unnecessary. How can I automate the removal of the archive redo logs with RMAN?

  Archive the log delete them all input command will take the destination of the log archiving log backup archive and delete this destination.

  In the log archive destination he has archived log in the sequence 1 to 100 then will he take the backup and delete any of the destination (Monday 23:00).

  In the log archive destination he has archived sequence journal 101 to 150 then will he take the backup and remove those in the destination (Tuesday 23:00).

  In the log archive destination he has archived log in the sequence from 151 to 180 so will he take the backup and delete any of the destination (Wednesday 10:00).

  It will continue like that.

  Concerning
  Asif Kabir

  -If you help brand the response as correct/useful.

• backup with rman

  Hello, I have several questions about rman.
  
  I have an Oracle RAC with 3 knots in Suse Linux Enterprise Server 10 on IBM's PowerPC, and I want a script for the backup of this database.
  
  My database is in archivelog and I multiplex that it again online connects two diferent locations
  Location 1 = >/u01/redo_log
  Site 2 = >/u02/redo_log
  
  Also, I have MUX logs oracle archived in two different places:
  
  Location 1 = >/u01/archive_log
  Site 2 = >/u02/archive_log
  
  I want a full backup of my database, for that, I think I have to configure somethings in Oracle rman like this:
  
  
  -Configure the backup to a disc (AREA of RECOVERY FLASH)
  DATABASE BACKUP AS BACKUPSET DEVICE TYPE DISK;
  
  -Backup of database and archivelog and delete all archive logs after backup. is true?
  DATABASE BACKUP AS BACKUPSET MORE ARCHIVELOG DELETE ALL ENTRIES;
  
  -Implementation of a strategy for retention of 7 days (I'm going to recovery all data from my database in 7 days)
  CONFIGURE RETENTION POLICY TO RECOVERY OF 7-DAY WINDOW;
  
  -Save our backup controlfile
  CONFIGURE CONTROLFILE AUTOBACKUP ON;
  
  OK, I want archivelogs auto removal in slot 1 (/ u01/archive_log) and 2 (archive_log/u02 /) when I have a backup of it, because I don't have a lot of space on the disk.
  
  My AREA of RECOVERY FLASH did not have a lot of space and I put a 7 day recovery window, then oracle delete backups obsolete or expired, IS TRUE?
  
  Well, I have the peripheral band but connect directly to any of my 3 knots, because I do not have the drivers for IBM PowePC, so I want to periodically copy to another server, and then copy the FRA in this new server Ribbon. I need before Oracle removes the obsolete backupset, is true?
  
  If I save all my backupsets to Ribbon I will be can restore all data to 3 months ago?
  
  Thank you very much
  
  PD: Excuseme, but I'm Spanish and my English is terrible, horrible!

  The RECOVERY WINDOW is part of the RETENTION STRATEGY.

  If you have defined a RECOVERY WINDOW of 5 days and you daily full backups or full backups every 2/3 days, over 5 days of backups would be OBSOLETE.
  However, if you perform only full weekly backups, full backup of last Sunday is not obsolete (even if it seems to be beyond the 5 day window). Oracle expects that the backup is available.
  However, if you moved it off disc then you have to manually restore this backup to disk first before the DATABASE RESTORE is on it.

  Therefore, to answer your question: even if the RECOVERY WINDOW is 5 days, if my last (or 'later') full backup is 6 or 7 days ago, that the backup is NOT deprecated by Oracle and is used for the RESTORATION. Of course, Oracle then, in my example above, apply to an incremental backup on Friday and then updated by ArchiveLogs on Friday has left.

  (Similarly for the full backup being restrained, ArchiveLogs are also retained by Oracle and not obsolete, because they are needed for the revival of this full backup)

• On Windows Vista 32 bit full backup fails with error 0x8007045d i/o device.

  Original title: 32 bit back up fails i/o device error

  I'm doing a full backup, because I just perchased Office 2010. I am trying to download on my cd player, E: got as far the 3rd cd and it fails

  i/o device error (0x8007045d)

  Help with this error code?

  Hello
   
   
  Try the methods listed in the section below and check if that helps resolve the issue.
   
  Error message when you try to perform a full backup on a Windows Vista-based computer: "the application cannot be performed because of an i/o device error."
  http://support.Microsoft.com/kb/952272
   
  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Is it possible backup 11g r1 DB and Recover to12c r1 with RMAN?

  I'm trying to save the old server to the new.

  Is it compatible to migrate Database 11.1.0.6 to 12.1.0.2 with RMAN?

  RMAN restore and recover a previous version of backups. See the compatibility matrix RMAN to https://docs.oracle.com/database/121/RCMRF/compat.htm#RCMRF1949

  All output data base Oracle can restore backup sets and copies created by any prior release of Oracle Database.

  
  

  However, in order to open a database, the data must match the version of the Oracle binaries. If you restore and recover a previous version of the database, you will need to update database permission to open it.

  RMAN cannot upgrade and migrate a database, but you can use the wizard for DBUA do. I suggest that you only consider this document showing your upgrade options:

  http://www.Oracle.com/technetwork/database/upgrade/upgrading-Oracle-database-WP-12C-1896123.PDF

  Unfortunately, there is no way to upgrade direct 11.1.0.6 12.1 and you must upgrade the database to 11.1.0.7 first before restoring it. Other options, see the link above.

• Oracle 12 c with RMAN database backup

  Hi All-

  I started back to the top of one of my PDB using utility RMAN following the instructions on the link below.

  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/12C/R1/PDB/pdb_pitr/pdb_pitr.html

  --Connect to Oracle RMAN.
  rman> Connect target /
  --Set the Oracle RMAN backup device type and backup file location.
  rman> configure channel device type disk format '/stage/db_backup_files/cdb1/%U';
  --Turn on automatic backup of control files.
  rman> configure controlfile autobackup on;
  --Back up the database and archive logs.
  rman>backup database plus archivelog;
  rman> exit
  

  Back to the top has been done successfully, but when I started with the recovery process he gave me error reporting collection.

  Run {set until what SNA = 2263440; restore database connectable to pdb2; retrieve auxiliary destination of the pluggable database pdb2 = "/ stage/db_backup_files/cdb1 '; alter connectable database to pdb2 ;} open resetlogs}

  This is the track to RMAN

  Recovery Manager: release 12.1.0.2.0 - Production on sat 22 Aug 12:22:44 2015

  Copyright (c) 1982, 2014, Oracle and/or its affiliates.  All rights reserved.

  RMAN > Connect target /.

  connected to target database: RELIABLE (DBID = 1028507357)

  RMAN > run {}

  2 > ALTER DATABASE connectable to MultiPlay NARROW;

  3 > set up what SNA = 14899894;

  4 > restore database pluggable MultiPlay;

  5 > restore database pluggable MultiPlay;

  6 > alter database connectable to MultiPlay open resetlogs;

  {7 >}

  using the control file of the target instead of recovery catalog database

  Statement processed

  executing command: SET until clause

  From restoration to 22 August 15

  allocated channel: ORA_DISK_1

  channel ORA_DISK_1: SID = 22 type of device = DISK

  channel ORA_DISK_1: from the restore backup set data file

  channel ORA_DISK_1: specifying datafile (s) to restore from backup set

  channel ORA_DISK_1: restore datafile 00035 to E:\APP\ORADATA\RELIABLE\MULTIPLAY\SYSTEM01. DBF

  channel ORA_DISK_1: restore datafile 00036 to E:\APP\ORADATA\RELIABLE\MULTIPLAY\SYSAUX01. DBF

  channel ORA_DISK_1: restore datafile 00037 to E:\APP\ORADATA\RELIABLE\MULTIPLAY\MULTIPLAY_USERS01. DBF

  channel ORA_DISK_1: backup E:\APP\RECOVERY_AREA\RELIABLE\40A433F530464F3BBF2E7C0B1553ECE8\BACKUPSET\2015_08_22\O1_MF_NNNDF_TAG20150 piece reading

  822T115328_BXJ5C182_. BKP

  channel ORA_DISK_1: piece handle = E:\APP\RECOVERY_AREA\RELIABLE\40A433F530464F3BBF2E7C0B1553ECE8\BACKUPSET\2015_08_22\O1_MF_NNNDF_TAG20150822T115328_BX

  J5C182_. Tag BKP = TAG20150822T115328

  channel ORA_DISK_1: restored the backup part 1

  channel ORA_DISK_1: restore complete, duration: 00:01:05

  Restoration finished in 22 August 15

  From pick up to August 22, 15

  using channel ORA_DISK_1

  RMAN-05026: WARNING: following tablespaces set applies to the Point in time specified assuming

  List of tablespaces should have UNDO segments

  SYSTEM tablespace

  Tablespace UNDOTBS1

  Creation of automatic instance with SID = "zbnt."

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of the command recover at 22/08/2015 12:24:56

  ORA-19852: error creating services for the instance auxiliary zbnt (error 0)

  ORA-27302: failure occurred:

  ORA-27303: additional information: could not start the instance

  Thank you

  Siradji

  Just a wild guess

  You do not use this script in a command as Administrator window

  Therefore, you won't be able to create any service.

  I also have a question: your only troubleshooting activity consisted of hitting CTRL + C and CTRL-V, is not it?

  It's so boring to most of the people here do not even TRY to solve their own problems.

  -------------

  Sybrand Bakker

  Senior Oracle DBA

• Backup with rman backup sets

  Hi experts. I know about backup of backup without rman example sets but I want to know is there a way to backup with rman backup sets.

  Perhaps it works for your condition.

  RMAN > backupset backup is complete before ' sysdate-1';

  Kind regards

  Shivananda

• Is it possible backup backupset with rman sbt on disk

  Hello

  We backup data base of sbt with rman and nmda library (networker).

  We want to copy the disk sbt backupset. Is this possible?

  Kind regards

  William

  I remember that this is not possible. It was perhaps possible to redraw the rman backup and restore concepts, but there is probably no real business applications. Remember that a band or an sbt (series tape backup) is a streaming device. You can read from tape or write about a band, but you can't read and write in the same band at the same time. What syntax would you choose to perform an rman backup from tape to disk or tape to tape? Rman backup you can specify a peripheral channel of exit and entry for the use of the restore command. As far as I know, the rman backup source is the database control file and it reads no Ribbon.

• ORA-25408: can not read the appeal during a duplicate backup with rman catalog database safely

  Hello

  I did a database duplicate backup with rman catalog connection and got the ORA-25408: cannot read error call safely.

  The catalog database is running in a Data Guard environment.

  During the double process database failover occurred because of a server restart.

  The restore of the data files was successful:

  RMAN-08023: channel t1: restored the backup part 1

  RMAN-08180: channel t1: restoration complete, duration: 00:01:15

  RMAN-03091: finished the restoration at 27.08.2014 09:27:10

  During execution of script memory:

  RMAN-08161: content of the Script from memory:

  {

  switch from clone datafile;

  }

  RMAN-08162: execution of Script memory

  I got this error:

  RMAN-08162: execution of Script memory

  RMAN-08031: output channel: t1

  RMAN-00571: ===========================================================

  RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.

  RMAN-00571: ===========================================================

  RMAN-03002: failure of Db in dual at 27/08/2014 09:27:10

  RMAN-05501: abandonment of duplicate target database

  RMAN-03015: an error has occurred in the script stored memory Script

  RMAN-06004: ORACLE recovery catalog database error: ORA-25408: cannot read safely call

  Dual boot time: 16:00

  Failover time: 18:00

  Error time: 09:00 the next day

  DB version: 11.2.0.4.0, not the RAC environment, single instances

  That's happened? My My db catalog rman session did not survive? Why the error happened at 09:00 (and not 17:00)? Why the session called the catalog rman during switching of the data files?

  Can someone explain it to me?

  Thank you!

  Hello

  The connection of the RMAN catalog remains inactive during the backup/restore process, once rman completes the task and try to activate the connection it gets error.

  What is expected as you said the rebooted server. If this happens because of the expiration time, we went with the parameter net expire_time to maintain the connection.

  Thank you

  Bigot

• restore user managed with RMAN backup hot

  Is it possible to restore hot backup with RMAN user managed and recover the database?
  
  What is use of command RMAN CATALOG?
  
  Oracle doc said: [http://docs.oracle.com/cd/B14117_01/server.101/b10770/rcmsynta11.htm#79814]
  
  (1) order catalog added a copy of the data file information, archived redo log or copy of control in the repository files.
  (2) add metadata to a copy of the data file managed by users, copy of control files, archived log or backup piece to the RMAN Repository.
  
  After using the 'CATALOGUE' to add metadata to managed backup in the catalog of recovery and after having made "RESYNC CATALOG", I still don't see my backup listed in the output of
  
  RMAN > list backup
  
  Published by: Gaurav Mhatre on April 23, 2013 10:35

  Gaurav Mhatre says:
  After using the 'CATALOGUE' to add metadata to managed backup in the catalog of recovery and after having made "RESYNC CATALOG", I still don't see my backup listed in the output of

  RMAN > list backup

  backup of the list won't show you the results.your not done backup with rman directly taken by data copy.so file

  RMAN > list copy;

  above cmd will show that you have desired results check it out.