FULL ROUTING DNS DOMAIN NAME

Similar Questions

• upgrade from 5.0 to 5.5 vCenter: DNS domain name to be added as a source of identity, Active directory native

  I intend to upgrade a vCenter 5.0 to 5.5.

  The vShpere environment is used for the test and is not integrated with Active Directory, if users log on the vCenter uses groups and users local vCenter.

  During the upgrade, I have the option to check a box saying "Add < nom_domaine_dns > as a source of identity, Active directory native.

  Please can someone explain what this means?

  What it is supposed to happen if I do not check the box?

  Local users and groups vCenter will be able to log on again after the upgrade?

  Even if it's a test environment I can't create any kind of problems for existing users, so selecting the right answer is essential...

  Concerning

  Marius

  SSO, you have the option to add Sources of identity (like LDAP, Active Directory) where the useres and groups are managed.

  This option has no meaning for you if you vpshere environment is not integrated with active directory. But it makes no difference if you select or deselect it.

  local users will continue to work...

• The domain name server &#40; DNS &#41; is not accessible

  Dear all,
  Need your big help here.
  Currently, I face below Internet connection problem at home.
  For this reason, I am really worried and I am not able to video chat with my family for the last days 6 :(
  Please help me
  In fact, I use a laptop provided the office with Microsoft Windows XP Professional/5.1.2600/SP3
  I use the same laptop at home too. Just do the below
  1 obtain an IP and DNS server address automatically
  2 disable the proxy in LAN setting
  For the last 3 months, it went well. Really not sure what happen last Thursday. The internet does not work at evnthough I am able to connect to the local network.
  I searched on the net (at the office) and followed all the steps below. But the problem still exists
  1. check all cables the same I replaced the new LAN cable
  2. downloaded and run WinsockFix
  3. reset WINSOCK entries
  4 release/renew IP address
  My details:
  Using the connection ETHERNET WIRWED
  1394 net adapt #2 - status (connected, firewalled)
  Intel(r) 82566MM Gigabit Network Connection - status (connected, firewalled)
  Broadcom 802.11a/b/g WLAN - status (connected, firewall)
  C:\Documents and Settings\scfb > IPCONFIG/ALL
  Windows IP configuration
  Name of the host...: San-kartcs
  Primary Dns suffix...:
  Node... type: mixed
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: kr.standardchartered.com
  Ethernet wireless network connection card:
  State of the media...: Media disconnected
  ... Description: Broadcom 802.11a/b/g WLAN
  Physical address.... : 00-21-00-44-76-F8
  Ethernet connection to the Local network card:
  The connection-specific DNS suffix. : kr.standardchartered.com
  ... Description: Intel(r) 82566MM Gigabit Network Connection
  Physical address.... : 00-1E-68-90-E3-00
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  ... The IP address: 192.168.200.100
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.200.254
  DHCP server...: 192.168.200.254
  DNS servers...: 168.126.63.1.
  Lease obtained...: Monday, December 12, 2011 21:49:36
  End of the lease...: Monday, December 12, 2011 22:49:36
  C:\Documents and Settings\scfb >
  While scnanning services "in Help and support center" from the start menu through "Use tools to view your computer information and diagnose problems" for the diagnosis of network
  . He FAILED in 'network adapters '.
  The Internet (DNS, Domain Name Server) service provider is not available
  Network cards
  DNSServerSearchOrder = 168.126.63.1 (FAILED)
  Ping 168.126.63.1 with 32 bytes of data:
  The inaccessible destination network.
  The inaccessible destination network.
  The inaccessible destination network.
  The inaccessible destination network.
  Ping statistics for 168.126.63.1:
  Packets: Sent = 4, received = 4, lost = 0 (0% loss)
  Time approximate round trip in milli-seconds:
  Minimum = 0ms, Maximum = 0ms, average = 0ms
  Checked all services and seems to be well
  System event COM + (for WZC issues)-getting started
  Computer browser (browser of the computer will start when necessary)
  DHCP client - started automatically
  DNS Client automatically
  Network - started manual connections
  Network Location Awareness - started manual
  Remote procedure (RPC) call - started auto
  Server automatically
  TCP/IP Netbios helper-autostart
  Automatic configuration (XP wireless configuration) wireless
  Autoconfiguration WLAN (Vista wireless configurations) service
  Workstation - auto
  Please suggest me some ideas that will be really useful for me and my family:)

  Hello

  see this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-networking/ICS-XP-Windows7-DNS-server-not-responding/0338b59a-2ffa-4070-BA2E-bd5d847fc8a7

• ISE 2.1 FULL domain name change

  Is there a way to change the complete domain name without having to re - configure ISE from scratch?

  I have a 2-node deployment.  The area is changing - so I have a new cert of wildcard for the new domain, but the fqdn of the server classes won't work w / the new cert.

  Hey Moody,

  Domain name can be changes using below command.

  ISE3395/admin (config) # ip domain name?
  DNS domain name search (Max Size - 64)

  If you update the domain name for the Cisco ISE server with this command, it displays the following warning message:

  Warning: Updating the domain name will cause any certificate using the old
  domain name to become invalid. Therefore, a new self-signed certificate using the new domain
  name will be generated now for use with HTTPs/EAP.  If CA-signed certificates were used on this
  node, please import them with the correct domain name. In addition, if this ISE node will be
  joining a new Active Directory domain, please leave your current Active Directory domain before
  proceeding.

  http://www.Cisco.com/c/en/us/TD/docs/security/ISE/2-1/cli_ref_guide/b_is... Prior to this change: 1 untie the knots of ISE area 2. Ensure that the computer name is removed AD 3. Update the DNS 4 records. Ensure that the DNS records have been replicated 5. Change the names on ISE 6. Join nodes to the new domain. Hope this helps! Gagan cordially

• Home ASA 5520 object by domain name?

  Is it possible to configure a host in the group object by domain instead of the intellectual property or other autour work?  I want to use my dynamic dns domain name as the host that is allowed in the firewall.

  Thus, instead of

  object-group network REMOTE_USER1

  network-object host 123.45.67.89

  I'd do,

  object-group network REMOTE_USER1

  network-object host myDomain.dyndns.org

  Not on the current version unfortunately. This is a new feature that will be introduced in the upcoming major release.

• What happens to my domain name when I delete a Dreamweaver site?

  I used Dreamweaver to create my own Web site for a year or so now which is connected to my domain name www.tamaragilliland.com. For this particular website, I decided to start using Squarespace for build it for several different reasons. In any case, I still want to use the same domain name and the link to my site Squarespace I built, but I don't know how to erase all content now linked through Dreamweaver. It is also easy to remove the site under Manage Sites in Dreamweaver? That will allow the domain name to be cleared and ready for use on Squarespace, or is there more I should do? I didn't do something without being sure, because I can't afford to have no Web site online for a long period of time.

  Thank you!

  Go to the control panel for the registration office where you bought your domain name.

  Make sure that DNS (Domain Name Server) settings match the settings of your server with the new Web site files DNS.

  http://help.Squarespace.com/guides/mapping-a-domain-general-instructions

• The network connectivity status appears as only 'Local' error message ' there may be a problem with your domain name server (DNS) configuration "when trying to diagnose the problem.

  Original title: connection internet wireless Sony Vaio problems

  I get connection "local only" and then when I try to diagnose and repair he said: "it may be a problem with your domain name server (DNS) configuration. He said that this problem cannot be fixed automatically and I have no idea what to do.

  How do you connect to the Internet (method/ISP)? What is a stand-alone computer or a corporate work station? What is the status of virus/malware of the machine? Please give us more details so that we can help you.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting Internet connectivity

  1 answer to the first and second troubleshooting Questions:

  First Question of troubleshooting: If the problem is new, what has changed between the time things worked and the time they do not have?

  The second issue of Windows troubleshooting: what is the status of virus/malware of the machine? If you think it's clean, what programs (and versions) allows you to determine this?

  Make sure that the computer is clean - http://www.elephantboycomputers.com/page2.html#Removing_Malware

  Many variants of malware will allow a proxy server if you are unable to Internet. Go to control panel > Internet Options > connectivity tab > LAN button. If all is selected in the section Server Proxy, uncheck the box, apply/OK outside.

  2. If nothing has changed and that the computer is clean, what antivirus/security programs are you running? Have AVG 8 or Zone Alarm? These two programs have had updates that caused Internet connectivity problems. I don't recommend either of these programs, but if you want to keep check them on the mftrs.' support websites.

  3. If #2 is not applicable:

  a. unplug the router.
  b. disconnect the modem. (If you have a DOCSIS 3 modem with battery backup, press the Reset button to reset the modem so the lights go out).
  c. wait 60 seconds.
  d. plug the modem (or wait until the reboot is completed) and expect that all the lights are on.
  e. plug the router and wait until all lights are on.

  You now have an Internet connection? Otherwise:

  4. connect your computer directly to the cable/DSL modem. You now have an Internet connection? If so, there is a problem with the router. They do not last forever. Replace it.

  If there is no Internet when your computer is connected directly to the cable/DSL modem, call your ISP because something is wrong with the cable/DSL modem or your Internet service.

  MS - MVP - Elephant Boy computers - don't panic!

• How can I know the FULL domain name &amp; names for the installation of a digital certificate Public in ISE?

  We are implemented a project with Cisco ISE; but comments Portal appears to users as a "untrusted site". For problems, a public digital certificate must be installed in Cisco ISE, so he can send it to users who enter the comments Web portal.

  Now... to sell me the certificate, VERISIGN needs to know settings ISE of the certificate, such as name of area COMPLETE, names subnames, etc... How can these parameters of ISE?

  Thaks a lot!

  This isn't an easy question to answer, there are a ton of variables to include

  Local web site Central Web Auth or Auth

  LWA, the WLC is the "man in the Middle" to the request of the customer for PSN (server nodes), the WLC takes the request webauth and resembles webauth then the redirect URL that you put in the WLC

  If the redirect webauth URL is https://ise01.mycompany.com:8443/guestportal/login.action, the WLC is a redirect but the virtual IP address comes in 1.1.1.1, who was as trustworthy or redirection complains, then you may have to get the public certificate for the fqdn of 1.1.1.1, and the comment server. You can create a CSR using openssl or you can just enter in ISE and create a CSR, but you can only set CN = ise01.mycompany.com and nothing else, as long you have a single NHP is good, but if you have several Ssnp, you need to change your CSR so that you have to use openssl to create CSR using a file openssl.cnf and then with openssl, you do the following:

  openssl req - new - nodes-out openssl.cnf omf-01 - ise04.csr - config

  You must do it the way I said above regardless of CWA or LWA, if you have more than one PSN, you must point to a FULL VIP domain name and then configure your DNS to answer for these host names. With LWA, you get virtual IP WLC involved 1.1.1.1, so you don't have to worry about getting a certificate for this, it is a cleaner installation, but you must always do all the rest. It must ensure that users of your guests have the opportunity to join the portal comments and be able to solve the given DNS the dns server that they have been configured with.

  Content of the file openssl.cnf:

  [req]
  nom_distinctif = req_distinguished_name
  req_extensions = v3_req
  default_bits = 2048

  [req_distinguished_name]
  countryName = name of the country (2-letter codes)
  countryName_default = en
  localityName = name of the locality (for example, City)
  organizationalUnitName = organizational unit name (for example, section)
  commonName = Common Name (eg, YOUR name)
  commonName_max = 64
  emailAddress = Email address
  emailAddress_max = 40

  [v3_req]
  keyUsage = keyEncipherment, dataEncipherment
  extendedKeyUsage = AutClient, serverAuth
  subjectAltName = @alt_names

  [alt_names]
  DNS.1 = guest.mycompany.com
  DNS.2 = guest.mycompany.com
  DNS.3 = ise01.mycompany.com

• Configuration remote access VPN (IPSec) using FULL domain name

  Hi friends of Cisco,

  We have the DNS (only the internal IP) within our network, right now that we have configured VPN for remote access using public IP address and connect us with the same public IP address. I need help to use the domain name FULL rather than use public IP.

  Can you please provide the configuration for this.

  Feature: ASA 5520

  Type of configuration: IPSec

  Thank you

  Estel

  Hi Philippe,.

  You can use one of the free Web of DNS dynamic sites and configure ASA to dynamic DNS.

  Reference - http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/basic_ddns.html

  HTH,

  -Dieng

• Network error mystery - Windows cannot access \\server\users when you use the netbios name, but works fine when you use the full domain name.

  Hi all:

  Mystery - I have a Win 7 work company that cannot access a particular action.  I get the following error-"you are not allowed to access \\server\users.  Contact your network administrator to request access.  However, these users can access these files successfully on other computers, and also if I use the fqdn or the IP instead of the "netbios name server", it connects successfully.

  Environment:

  -Workstation and server at the same time in the same AD Windows 2008 r2 domain.

  -All users, admin and non admin, cannot access this share when connecting to this computer only.

  -ACCESS to the other actions on the same server, as well as actions on other servers.

  -The biggest mystery to me - if I type the FQDN, \\server.domain.local\users, it works!  What the?

  I tried:

  -Deletion of the domain and add it again, no improvement.

  -Check Event Viewer, nothing jumps (not red or yellow).

  -Enabled auditing for access to objects on the server, it does not show a failure in the security event log.

  -Turn off the firewall of my computer.

  -UN-share and re - share the directory.

  -Give everyone full control (the fact that it works well with de facto authorities a little full domain name, a candidate little likely, but I have an open mind).

  For anyone wishing to offer their 'help' by asking me to make some sort of workaround as re - install windows or turn off netbios or use only of the full domain name here on out or whatever, please Don ' t bother.  I appreciate your help, but I am quite able to reinstall and I'm not interested unique hacks that affect this otherwise network well managed, I'm looking for a solution that will allow me to save time and is a long-term solution.

  In my view, that a key point here maybe I can connect successfully using \\server.domain.local\users, but not \\server\users.  Someone at - it some thoughts?

  In DNS server of youe, go to the area in question and in the use of select search before Wins wins tab and enter the address of your wins server if you have one. If not, install one.

• Customer view Windows - FULL domain name question

  I was wondering if someone had met before?

  I have a small view Horizon 5.3.1 of the network running test. I have 1 connection to the server and paired 1 security server. I have no problem with my security server sitting in my DMZ for use with remote access. The problems begin when I try to connect to the server of connection when I'm on the internal network. When you use the latest version of the Windows client view (running on Windows 8.1 x 64) and tryping in the FQDN of the server connection, I just get an error immediately says "unable to connect to the server. If I use the IP address then it works fine, but obviously is of no use, because I can't verify the cert.

  I had problems in the past with the help of short DNS (which does not), but I am not concerened that I want to use full domain in any case names.

  I checked the DNS and everything seems fine. If I ping domain name FULL of the connection to the server, I get a reply, all other servers are accessible by their FULL domain name and access HTML works fine using the FULL domain name and my certs check out OK.

  It sounds like a problem in the Windows Vista client. If anyone has any ideas, I would be very grateful.

  Thank you

  Pete

  It really depends on the whole upward. But we use the same URL for both. Ours are the same.

  Example of

  HTTPS://view.domain.com:port

  And we even put Blast Gateway for HTTPS for security servers and the connection.

  then when you pull up to your customer. To connect to the server, simply type in view.domain.com and it should work if you have DNS entries on the DNS server for your domain.

• Health HQ-&gt; Agents tab issue with FULL domain name

  When I go to the HQ health-> Agents tab, I see some of my platforms have the FULL domain name noted quite rightly hostname.domain.com (or other). However, some of them only the IP address of the list and have no FULL domain name. I checked and these IP addresses do not have matching PTR DNS records, so I don't know why this should happen.
  
  Can someone tell me why this is happening?
  
  Hyperic entering these data? It does not appear to conduct research at the time the listing agent is created. Maybe when the platform is created? If so, how I would solve this? Can I just update a column in the database with the correct information?
  
  Thank you
  Brian

  Opps, I forgot a

  Platform.Name =
  Platform.FQDN =

  Unfortunately, I don't remember if the agent should be reconfigure (clear data directory and redemarrees) or not.

• The vCenter server's FULL domain name.

  People,

  Using vSphere SDK Web services, is it possible to get the domain name FULL of the vCenter server that I have connected to? For example, foo - test.domain.com is the name of a field FULL of my RESUME, but I can connect to the Victoria Cross with SDK giving the name as foo-test. Once connected, is their any property by which I can get the FQDN of my CV, IE like foo - test.domain.com.

  Help in this regard is highly appreciated.

  Many thanks in advance,

  -Mani.

  (1) this property reflects maybe just how the guestOS has been set up if she had the FULL domain name or not, I'm not 100% sure but I always put my host names a FQDN. You can watch the underlying guestOS to see how it is set up compared to others which show the COMPLETE domain name

  (2) your original question was on vCenter FQDN, this property as mentioned is only for vCEnter and not for ESX (i). If you need to search for this information, you must watch the HostSystem that represents your ESX or ESXi host. You'll want to take a look at the HostDnsConfig property to find the short hostname under the host name and the domain under the domain name and that will provide COMPLETE domain name.

  I think the best way to interrogate this information actually uses your DNS infrastructure, it is what it is. Looks like not all your environments are configured using domain name FULL which in my books, is not a best practice. If this is the case, what data are only as good as the original configuration in order to make virtual infrastructure out of the image and simply use DNS to query for it. It is trivial to extract the IP addresses of your vCenter and the host ESX (i), so you can use it as a base to make your look up.

  I also recommend to take a look at the API reference documentation, it is the best place to find this information and using the search feature is also very useful to fine-tune the properties that interest you - http://www.vmware.com/support/developer/vc-sdk/visdk41pubs/ApiReference/index.html

  I hope this makes sense

  =========================================================================

  William Lam

  VMware vExpert 2009,2010

  VMware VCP3, 4

  VMware VCAP-DCA4

  VMware scripts and resources at: http://www.virtuallyghetto.com/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  VMware developer community

  If you find this information useful, please give points to "correct" or "useful".

• FULL domain name v IP to install &amp; matching site

  During the installation of SRM, the local VC is specified. ADX FQDN or IP can be used but FQDN is recommended. At the time of the twinning of sites, remote VC is specified, and even once, FQDN or IP with the FULL domain name as best practices. But what is important, regardless of the method is used to install, then same method should be used when matching.

  My question is what do I do if you do not have? In other words, what happens if you use opposing methods (FQDN and IP or vice versa) installation and then matching? What breaks?

  The documentation is strict for the sake of simplicitly.  Basically, the need for the game has to do with SSL and server certificates verification.  By default, when the SRM connects to the VC Server he expects the DNS assertion made in another name for the subject certificate VC to be an exact match of the IP/domain name FULL used to access this VC.  If the local SRM uses the IP addr to reach a given VC and MRS. remote uses the FQDN to reach this same VC, for example, the statement in the certificate can not compete two values.

  An exception to this is the case where, during installation, the user chooses to accept the certificate of the VC based on the footprint.  In this case a VC certificate gets checked on each SSL connection that is only based on the footprint and the affirmation of DNS is not required to match.  I guess that's the case, you see here.

• My hotmail account has certainly was hacked and used to change the DNS settings on a vauable domain name registration.

  My hotmail account has certainly was hacked and used to change the DNS settings on a vauable domain name registration. Indeed, they stole the domain name, which used my hotmail account as account checking the change of domain name registration. It is a police matter. How can I get the security of Hotmail team to freeze the mail in the account and then return the account for me? I am the owner of long-standing account, since 1995. What should I do to prove that I am the rightful owner of the account?

  How can I contact Hotmail security ASAP?

  Hi JoePiecora,

  Thanks for posting your question in the Microsoft answers Forum. For any question on Hotmail, please visit the following link:

  http://windowslivehelp.com/forums.aspx?ProductID=1