Home ASA 5520 object by domain name?
Is it possible to configure a host in the group object by domain instead of the intellectual property or other autour work? I want to use my dynamic dns domain name as the host that is allowed in the firewall.
Thus, instead of
object-group network REMOTE_USER1 network-object host 123.45.67.89
I'd do,
object-group network REMOTE_USER1 network-object host myDomain.dyndns.org
Not on the current version unfortunately. This is a new feature that will be introduced in the upcoming major release. Tags: Cisco Security Home Server 2003 domain name registration does not work. I had to reinstall my Home Server software and when I go to update the registration of domain name and the link to my live account it back with an error. I even tried with an error always the same different domain name. Pleas repost your request in the Homepage Server Forum, thank you! I've had this laptop for 3 years with no problems. One day last week when I tried to connect to my network home as usual, I get a message saying: more information needed, and he asks user name and PW domain name. All other wireless devices work as usual, only my Vista laptop. I never set it to connect to a domain. If I try to manually remove and reconnect to the network I get the same error. How can I remove this domain setting so I can connect to my home network as usual? All the most popular tips... PS You may have guessed that I am no computer wiz! Thank you very much Hello Look at the configuration in Control Panel / System. See here http://www.ezlan.net/Win7/group_name.jpg Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET Difference between "Home network" and "Business Network" WITHOUT a domain name in Windows 7? I'm paranoid and always try to choose security options more high. In preparation for the implementation of a small Windows 7 network behind a NAT router wireless and wired, I'm working through "Microsoft Windows 7 in depth" by Cowart and Knittel (what, rights of copyright 2010). I fell right on the following steps (mentioned verbatim in p. 446-447), that I don't understand. (The steps are clear enough but the real difference between the first two choices is not.) : «.. . Click on change settings, click Network ID... You are prompted to select the option that best describes your computer: «That one you choose made a significant difference...» If you choose the option "Business Network", Windows configures your computer for a better level of security it will be for domestic use [my underlining]. The wizard then asks you choose one of the following responses: «.. . If you build your own network as described in this chapter, select a field, then click Next. The last question asks a name for the network working group. Leaving the WORKING group by default in place". It seems that you can set up a "Business Network" 'without a domain' that outward behaves as a similar "home network". If Yes, what is this 'higher standard of security' that will result? -JCW2 There is only one difference between home network and profiles work that appears when you sign in for the 1st time. A profile of home network allows to create or join a homegroup, on a job profile that you can not. So what it means actually using the term "business" is false and the differences in security are limited. One of the limitations of a workgroup can access one action requires the credentials of all users to set up on the host pc, setting up a homegroup automatically creates a common user between computers that could be considered a low security setting... With an ASA 5520 port forwarding Hi all I recently bought a Cisco ASA 5520 on eBay for study and I decided to only use it as a firewall between my home LAN and Internet. Wow, what a learning curve! I managed to add my internal networks as objects and create a rule (thanks to youtube) NAT to PAT my internal devices out of the Internet with ASSISTANT Deputy Ministers, but I am really struggling to do the following:- -allow all incoming traffic that hits the outside interface for port 38921 and nat at 10.1.10.101:38921 -allow all incoming traffic that hits the outside interface for port 30392 and nat at 10.1.10.101:30392 Can someone guide me on how to do it, because I have a couple of services that run behind these ports on a server I want to get when I'm not at home? My (rather messy) config is as follows:- hostname FW1 activate the encrypted password encrypted passwd names of ! interface GigabitEthernet0/0 Description * externally facing Internet *. nameif outside security-level 0 IP address dhcp setroute ! interface GigabitEthernet0/1 Description * internal face to 3750 *. nameif inside security-level 100 IP 10.1.10.2 255.255.255.0 ! interface GigabitEthernet0/2 Shutdown No nameif no level of security no ip address ! interface GigabitEthernet0/3 Shutdown No nameif no level of security no ip address ! interface Management0/0 nameif management security-level 100 IP 192.168.1.1 255.255.255.0 ! passive FTP mode the VLAN1 object network subnet 192.168.1.0 255.255.255.0 Legacy description network of the WiredLAN object 10.1.10.0 subnet 255.255.255.0 Wired LAN description network of the CorporateWifi object 10.1.160.0 subnet 255.255.255.0 Company Description 160 of VLAN wireless network of the GuestWifi object 10.1.165.0 subnet 255.255.255.0 Description Wireless VLAN 165 comments network of the LegacyLAN object subnet 192.168.1.0 255.255.255.0 Description Legacy LAN in place until the change on the file server object network Home 10.1.10.101 Description File Server service object Service1 tcp source eq eq 38921 38921 destination service 1 service Description the All_Inside_Networks object-group network network-object VLAN1 network-object, object WiredLAN network-object, object CorporateWifi network-object, object GuestWifi network-object, object LegacyLAN object-group service Service2 tcp - udp port-object eq 30392 object-group service DM_INLINE_TCPUDP_1 tcp - udp port-object eq 30392 Group-object Service2 object-group Protocol TCPUDP object-protocol udp object-tcp protocol Outside_access_in list extended access allowed object-group TCPUDP any inactive FileServer object-group DM_INLINE_TCPUDP_1 object Outside_access_in list extended access allowed object Service1 any inactive FileServer object pager lines 24 Enable logging asdm of logging of information Outside 1500 MTU MTU 1500 internal management of MTU 1500 no failover ICMP unreachable rate-limit 1 burst-size 1 ASDM image disk0: / asdm - 714.bin don't allow no asdm history ARP timeout 14400 service interface NAT (inside, outside) dynamic source FileServer Service1 inactive Service1 NAT (all, outside) interface dynamic source All_Inside_Networks Access-group Outside_access_in in interface outside Internal route 10.1.160.0 255.255.255.0 10.1.10.1 1 Internal route 10.1.165.0 255.255.255.0 10.1.10.1 1 Internal route 192.168.1.0 255.255.255.0 10.1.10.1 1 Timeout xlate 03:00 Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00 Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00 Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 Floating conn timeout 0:00:00 dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL Enable http server http 10.1.160.15 255.255.255.255 internal No snmp server location No snmp Server contact Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start Telnet 10.1.160.15 255.255.255.255 internal Telnet timeout 5 SSH timeout 5 Console timeout 0 interface ID client DHCP-client to the outside management of 192.168.1.2 - dhcpd address 192.168.1.254 enable dhcpd management
! a basic threat threat detection Statistics-list of access threat detection no statistical threat detection tcp-interception WebVPN username privilege of encrypted password of Barry 15 ! class-map inspection_default match default-inspection-traffic ! ! type of policy-card inspect dns preset_dns_map parameters maximum message length automatic of customer message-length maximum 512 Policy-map global_policy class inspection_default inspect the preset_dns_map dns inspect the ftp inspect h323 h225 inspect the h323 ras inspect the rsh inspect the rtsp inspect esmtp inspect sqlnet inspect the skinny inspect sunrpc inspect xdmcp inspect the sip inspect the netbios inspect the tftp Review the ip options ! global service-policy global_policy context of prompt hostname no remote anonymous reporting call Cryptochecksum:19be38edefe8c3fd05e720aedee62c8e : end 1. This is just one example of configuration and another option with to reason and avoid to send us the complete configuration of NAT: network of the 10.1.10.101 object Home 10.1.10.101 service object 38921 tcp source eq 38921 service service object 30392 tcp source eq 30392 service NAT (inside, outside) 1 static source 10.1.10.101 38921 38921 service interface NAT (inside, outside) 1 static source 10.1.10.101 30392 30392 service interface Let me know if it works VPN site to site &; outdoor on ASA 5520 VPN client Hi, I'm jonathan rivero. I have an ASA 5520 Version 8.0 (2), I configured the site-to-site VPN and works very well, in the other device, I configured the VPN Client for remote users and works very well, but I try to cofigure 2 VPNs on ASA 5520 on the same outside interface and I have the line "outside_map interface card crypto outdoors (for VPN client). , but when I set up the "crypto map VPNL2L outside interface, it replaces the command', and so I can have only a single connection. the executed show. ASA1 (config) # sh run : Saved : ASA Version 8.0 (2) ! hostname ASA1 activate 7esAUjZmKQSFDCZX encrypted password names of ! interface Ethernet0/0 nameif inside security-level 100 address 172.16.3.2 IP 255.255.255.0 ! interface Ethernet0/1 nameif outside security-level 0 IP 200.20.20.1 255.255.255.0 ! interface Ethernet0/1.1 VLAN 1 nameif outside1 security-level 0 no ip address ! interface Ethernet0/2 Shutdown No nameif no level of security no ip address ! interface Ethernet0/3 Shutdown No nameif no level of security no ip address ! interface Ethernet0/4 Shutdown No nameif no level of security no ip address ! interface Ethernet0/5 Shutdown No nameif no level of security no ip address ! 2KFQnbNIdI.2KYOU encrypted passwd passive FTP mode object-group, net-LAN object-network 172.16.0.0 255.255.255.0 object-network 172.16.1.0 255.255.255.0 object-network 172.16.2.0 255.255.255.0 object-network 172.16.3.0 255.255.255.0 object-group, NET / remote object-network 172.16.100.0 255.255.255.0 object-network 172.16.101.0 255.255.255.0 object-network 172.16.102.0 255.255.255.0 object-network 172.16.103.0 255.255.255.0 object-group network net-poolvpn object-network 192.168.11.0 255.255.255.0 access list outside nat extended permit ip net local group object all access-list extended sheep allowed ip local object-group net object-group net / remote access-list extended sheep allowed ip local object-group net net poolvpn object-group access-list splittun-vpngroup1 extended permitted ip local object-group net net poolvpn object-group pager lines 24 Within 1500 MTU Outside 1500 MTU outside1 MTU 1500 IP local pool ippool 192.168.11.1 - 192.168.11.100 mask 255.255.255.0 no failover ICMP unreachable rate-limit 100 burst-size 10 don't allow no asdm history ARP timeout 14400 Global 1 interface (outside) NAT (inside) 0 access-list sheep NAT (inside) 1 access list outside nat Route outside 0.0.0.0 0.0.0.0 200.20.20.1 1 Route inside 172.16.0.0 255.255.255.0 172.16.3.2 1 Route inside 172.16.1.0 255.255.255.0 172.16.3.2 1 Route inside 172.16.2.0 255.255.255.0 172.16.3.2 1 Timeout xlate 03:00 Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00 Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00 Timeout, uauth 0:05:00 absolute dynamic-access-policy-registration DfltAccessPolicy the ssh LOCAL console AAA authentication No snmp server location No snmp Server contact Server enable SNMP traps snmp authentication linkup, linkdown cold start Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac 86400 seconds, duration of life crypto ipsec security association Crypto ipsec kilobytes of life security-association 400000 Crypto-map dynamic outside_dyn_map 20 the value transform-set ESP-3DES-SHA card crypto VPNL2L 1 match for sheep card crypto VPNL2L 1 set peer 200.30.30.1 VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game map outside_map 65535-isakmp ipsec crypto dynamic outside_dyn_map outside_map interface card crypto outside crypto isakmp identity address
crypto ISAKMP allow outside crypto ISAKMP policy 20 preshared authentication 3des encryption md5 hash Group 2 life 86400 crypto ISAKMP policy 30 preshared authentication aes-256 encryption sha hash Group 2 life 86400 crypto ISAKMP policy 65535 preshared authentication 3des encryption sha hash Group 2 life 86400 Telnet timeout 5 SSH timeout 5 Console timeout 0
a basic threat threat detection Statistics-list of access threat detection ! ! internal vpngroup1 group policy attributes of the strategy of group vpngroup1 banner value +++ welcome to Cisco Systems 7.0. +++ value of 192.168.0.1 DNS server 192.168.1.1 Split-tunnel-policy tunnelspecified Split-tunnel-network-list value splittun-vpngroup1 value by default-ad domain - domain.local Split-dns value ad - domain.local the address value ippool pools username password asa1 VRTlLlJ48/PoDKjS encrypted privilege 15 tunnel-group 200.30.30.1 type ipsec-l2l IPSec-attributes tunnel-group 200.30.30.1 pre-shared-key *. type tunnel-group vpngroup1 remote access tunnel-group vpngroup1 General-attributes ippool address pool Group Policy - by default-vpngroup1 vpngroup1 group of tunnel ipsec-attributes pre-shared-key *. context of prompt hostname Cryptochecksum:00000000000000000000000000000000 : end ASA2 (config) #sh run Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac tunnel-group 200.30.30.1 type ipsec-l2l my topology: I try with the following links, but did not work http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a0080912cfd.shtml http://www.Cisco.com/en/us/products/ps6120/products_tech_note09186a00807e0aca.shtml Best regards... "" I thing both the force of the SAA with the new road outside, why is that? ". without the road ASA pushes traffic inward, by default. In any case, this must have been a learning experience. Hopefully, this has been no help. Please rate, all the helful post. Thank you Rizwan Muhammed. Configuration remote access VPN (IPSec) using FULL domain name Hi friends of Cisco, We have the DNS (only the internal IP) within our network, right now that we have configured VPN for remote access using public IP address and connect us with the same public IP address. I need help to use the domain name FULL rather than use public IP. Can you please provide the configuration for this. Feature: ASA 5520 Type of configuration: IPSec Thank you Estel Hi Philippe,. You can use one of the free Web of DNS dynamic sites and configure ASA to dynamic DNS. Reference - http://www.cisco.com/en/US/docs/security/asa/asa84/configuration/guide/basic_ddns.html HTH, -Dieng Problem connection ASA 5520 GANYMEDE I'm just confused at this point. This is the configuration I have so far for the configuration of Ganymede on ASA 5520. SH run 1 2 3 4 5 6 7 8 9 10 11 12 13 After that I was done with the Setup, I was able to connect using my username tacacas and the password you + activate password. After that, I closed my GANYMEDE server + to try to the local database. It worked for the user name and password but my password enable does not work locally. Got to be something very simple and he had written down, I was connected via the cable from the console and also changed it was completely with the user name and password but still not able to go into enable mode. After that failed I returned and turned on on my server TACACAS. When to wait a few minutes and trying to connect via tacacas NO GO. He doesn't like my username and password. So now I'm locked out and have to do password recovery because I can not connect using tacacas, and when tacacas is off I can not go in the local mode. Very litle documentation cisco out there for this issue... Any thoughts what coukld be the cause? I know that GANYMEDE works very well since he works on 500 + devices, I'm just confused at this point. I need to check a few things before recovery of password: To activate question, try typing the login: follow-up of your user name and password. For Ganymede number: 1.] error on the section of logging of the server Ganymede while accessing the credentials of Ganymede. 2.] was there any problems reachbility during this time? 3.] all services came fine? 4.] should focus on debugs following: debugging Ganymede Debug aaa authentication I'm not sure if this can be replicated, but yes love to help out if possible. Jatin kone -Does the rate of useful messages- How to change address on ASA 5520 VPN peer Environment: 7.2 (1) running ASA 5520 IPSEC VPN L2L established by using wizard. Change the IP address of the remote peer. Using ASDM, I can't change the name of the Tunnel Group (which is currently the address peer). I may change the address peer in the IPSec rule, but is that all that is necessary? I have to add a new group of tunnel using the new address of peers for the name? If yes how it is related to other objects that are required for a VPN? When you create a VPN using the wizard, it creates several objects that are difficult to track when changes are required. Is it better to remove all current VPN objects and create a new configuration using the wizard again? Is it's better to make the changes using the CLI? What lines must be changed for peer address when using the commands? Thanks in advance for any help! I may change the address peer in the IPSec rule, but is that all that is necessary? -No, tunnel group name must match the peer address. I have to add a new group of tunnel using the new address of peers for the name? -Yes. Is it's better to make the changes using the CLI? -I recommend it, but if you don't know you have no choice. Add new tunnel-group with group as new name address peer, same key etc. Add a new address peer settings under rule edit ipsec peer. Then you should be able to remove the old tunnel group. Hope this helps you, been a while since I made this way. Hello world I have an FQDN object on our firewall, IP address of this Exchange every day so the firewall has a rule to allow access to it on a specified port number. Example: allowed to Access-list inside_access_in line 284 extended tcp host 192.168.0.25 eq 191.235.193.75 (database.windows.net) 1433 (hitcnt = 0) 0xeef0bf01 It works very well, however I can not route traffic to the firewall of our series 6500 CORE switches if I do not know the IP address of the object. I have a server that needs access to this purpose to FULL domain name. How to get traffic from our base at the firewall? CORE Cisco 6509 (s2t54-ipservicesk9-mz. Spa.150 - 1.SY2.bin) Firewall Cisco ASA 5540 v9.1 21 (5) If the IP address changes every day, so it seems that the use policy routing based on traffic for TCP 1433 forward could be the solution for you. HTH Rick Cannot 'Sign in Windows Live' in WHS2011 to set up a domain name I'm putting in place on WHS2011 remote Web access. Router is configured correctly, but when I go to set up a custom Microsoft domain name using my outlook.com account, I get an error that says "the user name or password is incorrect. Retype your user name and password'. I KNOW I'm entering the correct name and password. Why is everything happening? How should I do? This issue is beyond the scope of this site and must be placed on Technet or MSDN The domain name server ( DNS ) is not accessible Hello see this link: I was checking my audits of security one came across one with event ID 576
Hello The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums. ITPro Windows XP Forum http://social.technet.Microsoft.com/forums/en/itproxpsp/threads Windows 7 cannot resolve the ip addresses of domain names I have a desktop computer that I built components purchased in a major computer store. I got this system works well for several months, now. Recently, however, I met a problem with one of the modules of memory of 2 GB. I deleted (because it turned out to be defective) and, shortly AFTER his withdrawal, have another problem with the resolution of Internet domain name. I have to say that I also installed my old Windows XP as an alternative OS and updated to sp3 (it is, in fact, that I use to access the internet and write this query). As you can see, XP I have no problem with internet access or name resolution. There are two other systems connected to the home network via wi - fi (one equipped with Windows Vista and the other a tablet PC running Windows XP Tablet Edition) and none of them have no access to the internet problem. I ran ipconfig/release and / renew without any result.
In fact, I have since fixed my problem. Believe it or not, it wasn't any major and detailed process. It was a very simple thing that NONE of the resolutions on that I read even suggested might be the cause, so I don't even think to check it out. Apparently, at any given time a week ago, or NAME of the COMPUTER, something erased my! I forgot how I found this, but I think that I went to my device manager by double-clicking on the icon "Computer" and select 'Properties' and happened to notice that, under 'Settings of computer name, domain, and workgroup', the ' computer name: "and" full computer name: "fields were empty! Hello First I must admit that I am not very versed in Cisco equipment or in general IPSEC connections so my apologies if I'm doing something really good obviously stupid, but I checked through any kind of things that I could find on the internet on the configuration of IPSEC VPN. The setup I have is an asa 5520 (o/s 8.2) firewall which, for now, is connected to a temporary connection beautiful style home broadband for testing purposes. The netopia router is configured to allow ipsec passthrough and redirect 62515 UDP, TCP 10000, 4500 UDP, UDP 500 ports in the asa 5520. I'm trying to connein out of a laptop with disabled windows firewall and vpn cisco 5.0.02.0090 client version. I ran several attempts through the ipsec configuration wizard options. most of the time that nothing comes in the newspaper to show that a connection was attempted, but there is a way I can set up product options the following on the firewall log: 4. Sep 24 2010 | 13: 54:29 | 713903 | Group = VPNtest9, IP = 86.44.x.x, error: cannot delete PeerTblEntry 5: Sep 24 2010 | 13: 54:29 | 713902 | Group = VPNtest9, IP = 86.44.x.x, drop table homologous counterpart does not, no match! 6. Sep 24 2010 | 13: 54:21 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF 3: Sep 24 2010 | 13: 54:21 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet. 6. Sep 24 2010 | 13: 54:16 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF 3: Sep 24 2010 | 13: 54:16 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet. 6. Sep 24 2010 | 13: 54:11 | 713905 | Group VPNtest9, IP = 86.44.x.x, P1 = relay msg sent to AM WSF 3: Sep 24 2010 | 13: 54:11 | 713201 | Group = VPNtest9, IP = 86.44.x.x, double-Phase 1 detected package. Retransmit the last packet. 3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1 3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1 3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1 3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1 3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1 3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1 3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1 3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1 3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1 3: Sep 24 2010 | 13: 54:06 | 713257 | 1 failure to phase: incompatibility of types of attributes of class Group Description: RRs would be: Group 2 FCMS would: Group 1 6. Sep 24 2010 | 13: 54:06 | 302015 | 86.44.x.x | 51905 | 192.168.0.27 | 500 | Built UDP inbound connection 7487 for Internet:86.44.x.x/51905 (86.44.x.x/51905) at identity:192.168.0.27/500 (192.168.0.27/500) and this, in the journal of customer: Cisco Systems VPN Client Version 5.0.02.0090 Copyright (C) 1998-2007 Cisco Systems, Inc.. All rights reserved. Customer type: Windows, Windows NT Running: 5.1.2600 Service Pack 3 24 13:54:08.250 24/09/10 Sev = Info/4 CM / 0 x 63100002 Start the login process 25 13:54:08.265 24/09/10 Sev = Info/4 CM / 0 x 63100004 Establish a secure connection 26 13:54:08.265 24/09/10 Sev = Info/4 CM / 0 x 63100024
Attempt to connect with the server "213.94.x.x". 27 13:54:08.437 24/09/10 Sev = Info/6 IKE/0x6300003B Attempts to establish a connection with 213.94.x.x. 28 13:54:08.437 24/09/10 Sev = Info/4 IKE / 0 x 63000013 SEND to > ISAKMP OAK AG (SA, KE, NO, ID, VID (Xauth), VID (dpd), VID (Frag), VID(Nat-T), VID (Unity)) at 213.94.x.x 29 13:54:08.484 24/09/10 Sev = Info/4 IPSEC / 0 x 63700008 IPSec driver started successfully 30 13:54:08.484 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014 Remove all keys 31 13:54:13.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021 Retransmit the last package! 32 13:54:13.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013 SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x 33 13:54:18.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021 Retransmit the last package!
34 13:54:18.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013 SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x 35 13:54:23.484 24/09/10 Sev = Info/4 IKE / 0 x 63000021 Retransmit the last package! 36 13:54:23.484 24/09/10 Sev = Info/4 IKE / 0 x 63000013 SEND to > ISAKMP OAK AG (Retransmission) to 213.94.x.x 37 13:54:28.484 24/09/10 Sev = Info/4 IKE / 0 x 63000017 Marking of IKE SA delete (I_Cookie = 36C50ACCE984B0B0 R_Cookie = 0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING 38 13:54:28.984 24/09/10 Sev = Info/4 IKE/0x6300004B IKE negotiation to throw HIS (I_Cookie = 36C50ACCE984B0B0 R_Cookie = 0000000000000000) reason = DEL_REASON_PEER_NOT_RESPONDING 39 13:54:28.984 24/09/10 Sev = Info/4 CM / 0 x 63100014 Could not establish the Phase 1 SA with the server '213.94.x.x' due to the 'DEL_REASON_PEER_NOT_RESPONDING '. 40 13:54:28.984 24/09/10 Sev = Info/5 CM / 0 x 63100025 Initializing CVPNDrv 41 13:54:28.984 24/09/10 Sev = Info/6 CM / 0 x 63100046 Set indicator established tunnel to register to 0. 42 13:54:28.984 24/09/10 Sev = Info/4 IKE / 0 x 63000001 Signal received IKE to complete the VPN connection 43 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014 Remove all keys 44 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014 Remove all keys 45 13:54:29.187 24/09/10 Sev = Info/4 IPSEC / 0 x 63700014 Remove all keys 46 13:54:29.187 24/09/10 Sev = Info/4 IPSEC/0x6370000A IPSec driver successfully stopped I have connectivity full http from the internet to a machine inside the asa 5520 so I think that the static routing and NAT'ing should be ok, but I am pleased to provide you with all the details. Can you see what I'm doing wrong? Thank you Sam Pls add the following policy: crypto ISAKMP policy 10 preshared authentication the Encryption md5 hash Group 2 You can also run debug on the ASA: debugging cry isa debugging ipsec cry and retrieve debug output after trying to connect. Satellite X 200 - 21 K - what current readers should I install Hi all I just sent my laptop for repair, Ii is currently experiencing vista windows on it and I would support cause I will format.I have a not so recent model and it's hy I need assistance. My question is what is the current readers, should I install I have the same problem enter password administrator or power on password. Disable the 68253840 code shows. I tried to participate get the battery cmos as suggested on other Web sites, but it's hard to disassemble. I used the enemy months laptop then Satellite A100-447 does not accept the 1 GB of flash memory or a memory stick? I've had my laptop since March and have used a compact flash 128 or 256 MB via adapter without any problem.However, I have now bought a 1 GB (for my Eos 300 d) but my laptop says cannot find software? I then bought a memory stick USB 2.0 1 GB, but my Resize photos when sending to recipients of mail When you send photos/images to the recipients of mail directly from windows Explorer that is no longer, asks me if I want to make it smaller or keep the original size, how can I do this task please? My I-Tune was not working properly. I deleted and tried to re - install I-Tunes. Message says that I need to install a newer version of Hello and Apple Software Update. I can't find a version more recent Hello and not yet looked for Apple SoftwareSimilar Questions
86400 seconds, duration of life crypto ipsec security association
Crypto ipsec kilobytes of life security-association 400000
card crypto VPNL2L 1 match for sheep
card crypto VPNL2L 1 set peer 200.30.30.1
VPNL2L 1 transform-set ESP-3DES-MD5 crypto card game
VPNL2L interface card crypto outside
crypto isakmp identity address
crypto ISAKMP allow outside
crypto ISAKMP policy 20
preshared authentication
3des encryption
md5 hash
Group 2
life 86400
IPSec-attributes tunnel-group 200.30.30.1
pre-shared key cisco
aaa-server TacServer protocol tacacs+
aaa-server TacServer (LAN) host 172.19.0.226
key *****
user-identity default-domain LOCAL
aaa authentication telnet console LOCAL
aaa authentication http console TacServer LOCAL
aaa authentication ssh console TacServer LOCAL
aaa authentication enable console TacServer LOCAL
aaa authorization command TacServer LOCAL
route LAN 172.19.0.0 255.255.255.0 172.30.186.1 1
Maybe you are looking for