Function argument unread under VC ++ by teststand edit

Similar Questions

• "Argument mismatch in the property or function argument" on nodes.length

  Hello

  But I try to get on the nodes property length, I always get this error:

  "Inadequacy of argument in the property or function argument.

  It happens regardless of what level of the DOM/SOM I try, even if I can solve the nodes, values, etc..

  Here is an example that would lift the error:

      var objDataGroup = xfa.resolveNode("$data");

  xfa.host.messageBox (objDataGroup.nodes.length);

  What I am doing wrong?

  Thank you!

  Have you tried the below...

  Try the resolveNode on $record instead of $data.

  var objDataGroup = xfa.resolveNode ("$record");

  xfa.host.messageBox ("" + objDataGroup.nodes.length);

  Thank you

  Srini

  Post edited by: Srini Dhulipalla

• Using variables for the AS2 function arguments

  Hello

  I am trying to create a function in AS2.

  After you create the function, I want to use the values stored in the variables specified for the arguments to the function instead of manually typing static values for the calculation of the service. Also, I want to use the function to assign a new value to the existing variable.

  I asked a similar question here 2 days ago and got the answer (thanks), but now I have another question - how to create the function to assign a value to the variable, the variable itself is also a function argument?

  For example, I have 6 numeric variables:

  var CoinA:Number = 10;
  var CoinB:Number = 20;
  var CoinC:Number;

  var CoinD:Number = 30;
  var CoinE:Number = 40;
  var CoinF:Number;

  Then I tried to create a function to assign values to the variables stuck and CoinF:

  function CalculationA(FirstCoin,_SecondCoin,_ThirdCoin):Void {}

  FirstCoin = SecondCoin + ThirdCoin;

  }

  CalculationA (stuck, CoinA, CoinB);
  CalculationA (CoinF, stuck, CoinF);

  The code above didn't really affect the values of 30 and 70 stuck and CoinF variables, but instead, stuck and CoinF values are undefined.

  Please give me the correct code if there is a good way to do this.

  Thank you

  Here's a way to do it, passing a string value with the name of the variable instead of the actual variable name...

  var CoinA:Number = 10;
  var CoinB:Number = 20;
  var CoinC:Number;
  var CoinD:Number = 30;
  var CoinE:Number = 40;
  var CoinF:Number;

  function CalculationA(FirstCoin,_SecondCoin,_ThirdCoin):Void {}
  This [FirstCoin] = SecondCoin + ThirdCoin;
  }

  CalculationA ('stuck', CoinA, CoinB);
  CalculationA ("CoinF", CoinD, person);

  (Note that in your second function call, I changed coins since CoinF (ThirdCoin) is not defined at this time).

• No functionality to import under the "file" menu Using winows xp and firefox 7.0 beta

  Trying to import Internet Explorer Favorites. Your help shows how go to 'file' and click Import.

  I used the 'alt' key to display the traditional menu.

  There is NO "import" under the "file" menu function

  How to import bookmarks?

  I use Windows XP and Firefox 7.0 beta.

  Import bookmarks in bookmarks (library) Manager

  • Bookmarks > show all bookmarks
  • https://support.Mozilla.com/kb/how-do-i-use-bookmarks

• Search function does not work in Adobe Digital Editions

  Hi all

  First of all, I use a PC and I am creating a 'fixed provision' epub using Adobe InDesign. I have included pictures and buttons to navigate through the book, and everything works fine, until I try to use search in Adobe Digital Editions. The search function works fine in ibooks, then I tried to open it in any other ebook readers, which has blurred my text and images, this Adobe Digital Editions software did not. For this reason, I want to stay with using Adobe Digital Editions. All text is online, so I know this isn't the problem. I tried to save the file as a "Reflowable" epub, even though I know that this will not work for me, just to see if the search function would work, and he did. So my question is, why can I not use the search feature of Adobe Digital Edition with a provision fixed epub, and is it possible that I can fix it?

  Thank you!

  Kelsey

  If anyone wonders, I found a solution to this problem, but also problems with fonts does display correctly in the Adobe Digital Editions software.
  
  CircularFlo

  Basically, you download the trial and it works with InDesign. It will also allow you to make a Kindle Edition, which is excellent. Basically you pay $99 for every epub to create it is less than 50 pages, and $199 you will get an epub with an unlimited number of pages. It also adds a lot of great animation features. I think it works well, and I hope this helps someone!

• Using variables for an AS2 function arguments

  Hello

  I am trying to create a function in ActionScript 2.

  After you create the function, I want to use the values stored in the variables specified for the arguments to the function instead of manually typing the static values for the arguments to the function. And also I want to use the function to assign a new value to the existing variable. Is this possible?

  For example, I've defined variables "here is a simple function named"CalculationA".

  var CoinA:Number = 10;
  var CoinB:Number = 20;
  var CoinC:Number;

  
  function CalculationA (CoinA, CoinB, stuck) {}

  Stuck = Number (CoinA) + Number (CoinB);

  }

  The code above does not really. No value is assigned to the variable stuck.

  Can someone give me a good AS2 code please?

  Thank you

  use:

  var CoinA:Number = 10;
  var CoinB:Number = 20;
  var CoinC:Number;

  CalculationA (CoinA, CoinB);

  function CalculationA(coinA,_coinB):Void {}

  Stuck = Number (coinA) + Number (coinB);

  }

• Sending the name of MovieClip as a function argument

  I have a form in Flash that contains twenty fields to form a pair of MovieClip.TextField. Each domain has a single parent MovieClip name and common name of TextField. On submission of the form, I want to write the data in each field in a table.
  
  Rather than writing the same loop if-else if-else for each field, I want to write a function that accepts the unique MovieClip name as an argument. Attached is a simplified version of my code. What I am doing wrong?

  Sorry... answer my own questions second after asking them. I had to pass the name of MovieClip as a MovieClip to the argument. See code attached.

• change the functions or procedures under sqlplus

  I have a problem to connect to the database of PL/SQL Developer, but I can connect to sqlplus to UNIX machine. How can I change a function of sqlplus?
  Thank you.

  Hello

  It's a little easier to connect to SQL * as owner and request rather than all_source user_source fucntion.

  To generate the file:

  SET  PAGESIZE  0
  SET  TRIMSPOOL ON
  
  SPOOL  c:\some_path\func_x.sql
  
  SELECT    text
  FROM      user_source
  WHERE     name = 'FUNC_X'     -- or whatever, case-sensitive
  AND       type = 'FUNCTION'   -- or 'PROCEDURE', or 'PACKAGE', or 'PACKAGE BODY', or ...
  ORDER BY  line;
  
  SPOOL  OFF
  

  Use any text editor to edit the file you created.

  The first line of a function begins with "FUNCTION". This must change to say "CREATE or REPLACE the FUNCTION".
  At the end, add these two lines:

  /
  SHOW ERRORS
  

  When you have made any changes, save the file and return in SQL * Plus, say:

  @c:\some_path\func_x.sql
  

  In other words, after the sign @, and put the path of the file with the modified code.

• Arguments for command line for TestStand tools

  If I run the user interface of the command-line like this:

  

  I get this:

  

  Now, I want to create a tool.  Then in the sequence editor, I go to tools > customize...  Then I add a command tool pointing to the executable of the user interface.  Then, I try to pass an argument as I did on the above command line.  -Help!  It doesn't seem to work.  I tried with quotes, without quotes, with a space without space, etc...  In the end, I want to spend my file in the sequence selected in there.  Ideas?

  

  Hi Jigg

  RunState.InitialSelection.SelectedFile.Path did the trick

  

  Concerning

  Jürgen

• Node function of library under Linux - features not found

  Hello

  I am developing a VI in LabView 7.1 2.6 Linux (Fedora Core 6) that needs to call a library function that I have developed. I believe that there are no errors in the code in the library or in the way the VI went, but LabView or can not use this library. Whenever I open my VI, he asks me to locate my library and when I point the LabView library, it all just cannot open it will ask me where is the library. If I chose to ignore it and continue loading the VI, once I double-click on my node library function and point LabView library error I get 'Can't load/search library' changes to "Library does not have the requested function". I coded the entire library in C and it built as follows:

  GCC-fpic shared - c EncoderLib.c

  LD g o libencoder.so EncoderLib.o - lphidget21

  Here, the - lphidget21 option is to post a link to a library I develop a wrapper of LabView for. This isn't the EXACT method mentioned in "Chapter 6: using external Code in LabView", but it is still close enough. I failed to get my library to compile in a statement. I'm unable to locate the document I'm referring to this time, but I think I got it somewhere on the Web site of NOR. In any case-maybe I'm linking or building this library incorrectly? I checked to make sure that the library contains indeed the function I am trying to call from LabView using "nm" Linux command line function. The result is as expected:
  $ nm libencoder.so
  TRUNCATED IN ORDER TO SEE THE PART IMPORTANT *.
  00000614 T NumEncodersAttached
  0000053 did PollPosition
  0000059b T PollRotations
  000004e8 T SelectAxis
  000005c 6 T SetPosition

  The listed functions are functions that I try to call, so they are definitiely in the library and even for some reson LabView can not find them! I was just tickled pink, if anyone has any ideas on how to solve this problem. If anyone has compiled and used a Linux library function node before, I'd love to hear about your experience and if you have had problems. Someone has to meet this problem before?  Any help is greatly appreciated. Please let me know if I can offer more information.

  Thank you all!

  -Andy

  Hey Charlie,

  Linux is not any sort of error handling capabilities. Thanks for the good suggestion, if. I finally understand it. LabView was very, very unhappy with the function toUpper, despite the fact that he lives in the standard library of C I pulled out the function and the library worked like a charm. I don't know if this is a mistake made by my (standard gcc for linux) compiler or if it is an error in LabView, but anyway it's probably something that users should know. Hope this helps someone in the future.

  Thanks for all the assistance, Charlie,

  -Andy

• Evaluate the function in an expression of State teststand

  Hello

  I can not understand the meaning of the Evaluate() function in the sentence below and do not find the explanation in the help files, could someone help me?

  Step.DataSource! = "Step.Result.PassFail"? Step.Result.PassFail = Evaluate (Step.DataSource): false, Step.Result.PassFail? 'Past': 'failed '.

  Sorry to confuse you.

  Hope that explanation helps.

  Step.DataSource! = "Step.Result.PassFail"? Step.Result.PassFail = Evaluate (Step.DataSource): false, Step.Result.PassFail? 'Past': 'failed '.

  If (Step.DataSource! = "Step.Result.PassFail") / / True if the user has selected a different source of data (by default, its step.result.passfail)

  {

  Step.Result.PassFail = Evaluate (Step.DataSource) / / extract variable stored in step.datasource.Read the value and store it in step.result.passfail

  }

  on the other

  {

  false / / do nothing when the default data source is present

  }

  If (Step.Result.PassFail) / / it will be the last default value or even if the data source is changed.

  {

  passed status is set as adopted

  }

  on the other

  {

  status failed is defined as being broken

  }

• How can I save my files to the computer under Windows XP Home Edition?

  OneCare.Live had instructions on how to back up my files when I use Windows XP Home Edition, and I want to use the backup utility. He talked about having to install the backup utility, but I don't have the instructions. Help, please.

  You will need your operating system CD.

  If you insert it into your CD drive.

  When welcome appears, click on exit.

  Make a right click my computer in the Start Menu and click on open.

  Right-click on the icon for Windows XP Home edition and click on explore.

  Double-click the VALUEADD.

  Double-click MFST.

  Double-click NTBACKUP.

  Double-click NTBACKUP. MSI.

  It automatically installs Backup.

  Click Finish and close all open windows.

  Remove the CD from the BONE of the reader.

  Click Start, all programs, accessories, system, backup tools!

  Have fun!

• [CS5.1 Illustrator] How to create a custom artboards.add function argument

  I am trying to add the new artboard using java script. I couldn't find a solution anywhere. Adobe scripting guidelines are just poor (to not use stronger words).

  I'm trying it returns error

  Error 1242: Rectangle of illegal argument value - 1 argument - expected

  When I use the value of "artboard.artboardRect" of the other work plan then it creates the plan of work in the same place, but I can't change it (resizing) that makes this useless option.

  artboards. Add (work plans [0] .artboardRect); works

  artboards. Add ([0,0,200,50]); Error 1200: an Illustrator error coccurred: 1346458189 ('PARAM')

  var rect = .artboardRect [0] of work plans;

  RECT [0] = 0;

  RECT [1] = 0;

  RECT [2] = 200;

  RECT [3] = 50;

  artboards. Add (rect); Error 1242: illegal argument - 1 argument - Rectangle value expected

  New Rectangle yields to "Rectangle is not Builder."

  Hi G. Aneta,

  the origin of the rule changed with CS5.

  Maybe this can help a bit to your understanding:

  // ArtboardsAddInEachQuadrant_CS5.jsx
  // regards pixxxelschubser
  
  var AB_1 = activeDocument.artboards.add([0,50,200,0]);
  AB_1.name = 'first quadrant';
  var AB_2 = activeDocument.artboards.add([-200,50,0,0]);
  AB_2.name = 'second quadrant';
  var AB_3 = activeDocument.artboards.add([-200,0,0,-50]);
  AB_3.name = 'third quadrant';
  var AB_4 = activeDocument.artboards.add([0,0,200,-50]);
  AB_4.name = 'fourth quadrant';
  

  Have fun

• Where is the function of "Photocopy" under "sketches" in CC PS?

  I'm working on a tutorial to learn more about the creation of a black and white image of a color photo and one of the steps is to go to filter > sketch > photocopy, but I don't have a sketch or photocopy I can find the CC of the PS version.

  KaCe

  In the Gallery of filters

  (Filter > filter Gallery)

  If you want filters to display on the list than previous versions of photoshop, go to (Edit) Photoshop > Preferences > Plug-ins and check show all names and groups of Gallery of filters.

  Restart photoshop to see the change.

• How can I change the skin of button with the function arguments?

  Hi guys, I am building a card witch I represent with grid 40 * 26 buttons, now I used to create an action script function that will get a string that contains the name of the folder where I store the data for example skin buttons:

  [Embed("maps/grass/upSkin.jpg")]

  _upSkin: class private var;

  [Embed("maps/grass/overSkin.jpg")]

  _overSkin: class private var;

  [Embed("maps/grass/downSkin.jpg")]

  _downSkin: class private var;

  private void changeMap (): void

  {

  slot: Button = new Button();

  slot.setStyle ("upSkin", test);

  slot.setStyle ("overSkin", _overSkin);

  slot.setStyle ("downSkin", _downSkin);

  }

  That's what I managed to do so far, what I would do is send to changeMap() a string with the path name access, but some how I can't integrate a variables, I'll be glade if you could find a solution for this.

  Here's the link to my site, so you can see what I mean. I'm not always online, but you can try.

  http://gazmanwars.zapto.org/

  * Best discovered ground less 1280 * 960

  You can use the selector of a CSS class rather then type selector you probbably do something similar in your css

  Button {}

  upSkin:

  DownSkin:

  }

  This will apply style on all of the buttons in your application as its happening now so you can use the Selector class more like this

  {.myButtons}

  upSkin:

  DownSkin:

  }

  the grid of buttons that make you can then use this statement

  Var b:Button = new Button()

  'b.styleName =' myButtons