Function FileSelectPopup in LabWondows cvi to view files as icons

Similar Questions

• I want to move a large number of photos but don't want to unique, click each photo. I know there is a simple control function that allows to select groups of files with ' two'clicks ', as opposed to the selection of each file. Suggestions?

  I want to spend a lot of photos (they are in order) but and do not want to have to click to move each photo. I know there is a simple control function that allows to select groups of files with ' two'clicks ', as opposed to the selection of each file. Suggestions? I know it's apple 101, but I don't remember what order to press the button command, or shift, or other. Thank you

  Select the first file, then hold down the SHIFT key, and then click the last file. Or, select any file in the folder and then press command + A

• Office system Vista, have a delay in all functions. start-up, connection, IE internet, opening files. To get a "waiting for..." appearing at the bottom of the screen - it seems to me that this means?

  Original title: Vista 32 bit system. slow!

  Office system Vista, have a delay in all functions. start-up, connection, IE internet, opening files. I seem to get a "waiting for..." at the bottom of the screen and a green line appearing across the top of the window when I'm waiting - whatever that means? Have upped the ram 4 GB - no change. runing ie7 to present, took 37sec to open the Web site to report this issue? All ideas, we will wait for you

  I was running another program to search for spyware, if you haven't done so already.  In addition, launch your AV software

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/remove-malware-or-virus/6bb49107-dfb7-4edc-990a-a0c533b6487d

  Did you ever reinstalled your OS from Vista running on your system?  If you have a Windows Vista OEM preinstalled on your system and you have an external hard drive, it wouldn't hurt to go back to factory settings and transfer your data on.  You would eliminate several possible culprits in your system running slow.

• Option 'Open folder to view files' missing from Autoplay prompt

  Original title: open the folder to view the files passed.
  Windo ws 7 ultimate. Recently noticed when I plug a USB key or external hard drive option 'Open folder to view files' is missing.
  

  I went in the "show more options to AutoPlay in Control Panel" and none of the any of drop downs are able to simply open the folder.

  Hello

  What is the option 'Open folder to view files' missing all the devices and media?

  Follow these steps and check if it solves the problem:

  Step 1:
  a. Click Start, click Control Panel.
  b. click on Autorun.
  c. in the AutoPlay window, scroll down and click on reset all default settings.
  NOTE: When you reset the default settings, it will give all game actions automatic in a State to choose A default.

  See the screenshot below:

  

  Now check if you get the option 'Open folder to view files' in the menu dropdown.

  
  Step 2:
  Auditor of files (SFC) system scan on your computer.

  Scan SFC will Windows replace corrupted or missing system files on your computer.

  Scan sfc enforcement procedure:
  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.
  b. click on continue or provide administrator credentials if prompted.
  c. in the type in the following command prompt window and press ENTER:
  sfc/scannow

  Refer to this article for more information:
  http://support.Microsoft.com/kb/929833 

  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• you try to view files remotely, online journal watch my PC name in the domain field

  Im trying to view files from a machine locked up remotely.

  Im going to the computer to the Working Group and when I try to connect it invites me for a user name and password. I get the name of the machine, that I discovered however, the field shows that the computer I use not one that I am trying to connect.
  The target computer is unresponsive and I need to get the files users & email off so I can clean the machine.
  Is it possible in Windows 8 to force the logon prompt to use a specific domain/computer name?

  Hi Kyle,.

  The computer that you are trying to access is connected to a domain network?

  If this computer is connected to a domain network, you can post this question in Windows IT Pro TechNet Forums 8 you will get the best help regarding problems of remote desktop: http://social.technet.microsoft.com/Forums/windows/en-US/home

  Additional information.

  Remote Desktop connection: FAQ: http://windows.microsoft.com/en-us/windows-8/remote-desktop-connection-frequently-asked-questions

  Remote Desktop: frequently asked questions: http://windows.microsoft.com/en-us/windows-8/remote-desktop-faq

  Windows remote assistance: frequently asked questions: http://windows.microsoft.com/en-us/windows-8/windows-remote-assistance-frequently-asked-questions

  Thank you.

• com.sunopsis.dwg.function.SnpsFunctionBaseException: ORA-00942: table or view does not exist

  Hi all

  I have a problem in the odiwaitfordata component and when I run get the below error

  Code:

  OdiWaitForData "-CONTEXT GLOBAL =" "-GLOBAL_ROWCOUNT = 1" "-LSCHEMA = ORA_LS" "-POLLINT = 1000" '-SQLFILTER = numero_fichier =-1 ""-TIMEOUT = 10000 ""-TIMEOUT_WITH_ROWS_OK = YES ""-INCREMENT_DETECTION = NO ' "-TABLE_NAME = PRACTICE." "" "" "» GENERATION. "

  Error:

  com.sunopsis.dwg.function.SnpsFunctionBaseException: ORA-00942: table or view does not exist

  Thanks in advance

  Kind regards

  Vivek

  Hi 2700773,

  "PRACTICE. GENERATION' is not a valid table name. You must only give the name of the table, not the schema name. You can also give a list of table, separated by a comma, or a table name masks using % and _ like wildcards.

  As for your previous question? Is it resolved? Please give us a feedback or close the message if it's over.

  Kind regards

  JeromeFr

• How can I convert my view files in pdf format

  How can I convert my view files in pdf format

  Not with Adobe/Acrobat Reader.  You have Acrobat Professional or Standard?

• Questions of miniatures, files show icon and no thumbnails

  Original title: QUESTIONS MINIATURES - FILES SHOW ICON AND NOT of THUMBNAILS

  I need help to solve my problem with my file which contains (obtained from the internet) RealPlayer flv videos. A few days ago I could see thumbnails when I opened the folder where each element has shown the thumbnail. Now, I see is the icon of Realplayer R. So far, I performed the following action points: 1 never ran a FULL scan - no threats 2. conducted a scan of the registry and corrected all errors 3. Open the folder and I clicked on 'folder and search options', clicked the view tab and make sure the "Always" display icons never thumbnails was NOT checked 4. in Control Panel, select system, select Advanced setting of the system, select performance setting, provided "always show icons never thumbnails" was hot checked 5. has run c:sfc / scannow - found no issues or problems 6. I tried c:regsvr32 shmedia.dll - he did not recognize. 7. do you have a disk cleanup - did not help 8. went on the Panel, clicked on the Option to record, made sure "Always - miniature" was not checked - has not helped. I can sure use the help because I ran out of options. I can open RealPlayer will display the icon on my desktop and thumbnails. My operating system is Vista Home Premium 32-bit. Thank you

  Diana,

  Thank you for having responded to my problem with thumbnail. I tried with a new user account, and the issue exist yet - NO single miniature icon. Any other thoughts or recommendations?

  I just fixed my problem - I went to the internet and connected to RealPlayer.com and download their latest version. IT WORKED! Everything is back to normal.

  Thank you

  Tony

• I can't rename the files or icons on my desktop

  All of a sudden, I find that I can not rename files or icons on my desktop.  I clic click right on the folder icon, select Rename, type over the existing name which is now in blue, press ENTER, and the original name is still there.  I was able to rename without problem before a few days ago.  I have not updated anything during this period.  I am running Vista Home Premium 64-bit.

  Hello

   

  Method 1:
  You can perform a scan of the SFC (System File Checker). It lists all the issues and will also retrieve all files if necessary. Follow the steps below to p Ed a SFC Scan -.

  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  See the link for further directions on scan SFC - below
  http://support.Microsoft.com/kb/929833

  
  Method 2:

  You can check if you are facing the same question in the user account new or different administrator account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If you are not faced with the same question in a new user account, you can view the link below and use the steps provided to fix a corrupted - user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

   

  Method 3:
  You try to perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Please refer to the below of the help links on performing a system restore.
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  I hope this helps.

• When you view images as icons, which is the blue square with 2 "superior to" symbols.

  When you view images as icons, which is the blue square with 2 "superior to" symbols and how do I get rid of them?

  If you are running Norton 360 or McAfee backup online-
  MozyHome backup... the following links may be worth a visit:

  Green checkmark or icon collection blue arrows displayed files in Windows
  Explorer:
  http://www.Winhelponline.com/blog/green-tick-or-blue-arrows-icon-overlay-displayed-for-files-in-Windows-Explorer/

  If you do not need the backup indicators feature you can turn off by
  by clicking settings in the main window of Norton 360, disable the backup
  Status indicators check box and click Close.

  If you use MozyHome backup... Take a look at the following links:
  (McAfee backup online = MozyHome)

  Why the Green checkmarks or other symbols appear on my file and folder
  icons?
  http://docs.Mozy.com/docs/en-user-home-win/FAQ/concepts/commissue_green_checkmarks_c.html

  How to add or remove the MozyHome download status icons on my data
  files?
  http://docs.Mozy.com/docs/en-user-home-win/FAQ/tasks/commonissue_disable_greencheck_c.html#task_C34D204F371D411C861979F3DDD4FDE1

• Cannot open any office files or icons, the Panel even not. Help!

  Hello
  I really need help desperately. I can't open any office files or icons. I restored to the point the closest that I can, but no difference. Cannot open the Panel even from the Start button. My compuetr crashes every time I double-click or right-click on the icon 'My Computer' or 'My Documents '.
  My restore CD that was shipped with the Toshiba Satellite 1800 does not work either. Help, please! I'm really desperate!
  Jess

  What do you think average with "I tried with the restore CD but nothing '? Have you tried to completely format your HARD drive? I had a similar problem, but in my case it was because of the transplant of BONE... so I reinstalled the system from the beginning and it was ok.
  If you can not solve this problem with the cd supplied by the factory... I think it might be a hardware problem, probably due to the HARD drive. Your HARD drive makes strange noises, like "Click - Clack"?

  Good bye

• How to convert a graphic .jpg or .wmf file in a file .ico icon?

  I would like to use some of my graphic files as icons (.ico) for shortcuts in Windows XP. How can I convert .jpgs or other graphics compatible Windows icons?

  Image Converter online free
  http://www.coolutils.com/online/image-converter/

• Cannot delete files (or icons) on desktop

  There are 6 files or icons on my desktop, all empty without file extension. When I try to add an extension, open, or delete them, I get the following message: "not found this point - check the location of this object, and then try again." I can't move these items in the trash, "difficulty" of Windows utilities do not work, and disk cleanup will not remove them. How can I get rid of them? I am running Windows 7.

  Just an idea, but have you refeshed Office?  It doesn't seem to be capricious and the symptoms would be.

  On a box open the desktop, right click, update

• Size (size of the incompatible displayed ico file) Windows icons

  Size (size of the incompatible displayed ico file) Windows icons.

  After resizesing my medium to large desktop icons I see several icons are not become larger. Unlike most of my icons, he remained the same size, but instead, they were in the Center and a greyframe. As a result, he started the project of change all the icons in some new. ICO files which would give them the great nice to register in the other size. After that my work was done, I had a nice full Office of the great pretty icons, all of the same size and none inside a gray frame. I reboot (restart) my computer and saw, to my horror, this (see photo) all of a sudden a random amount of icons has chosen to go back to being small and sit inside a gray frame. I don't see any explanation as to what size of icons changed.

  I try to change the display settings for size (control Panel\All Control Panel Items\Display) in 125% and 150%. Both times it switches around which the icons are large and small. so apparently no model at all. I restart again and find 2 icons went big and 4 other small. It's an amazing incompatible and it amazes me why windows this. Why can't keep windows icons (ICO) files to their proper size? (all my ico files support all sizes, as far as I know, and they have developed scale perfectly up down before the 1. Restart)

  It's incredibly frustrating. MY question is. Can I just to force Windows to use the maximum size, or somehow it resolved so that windows will scale icons up and down properly?

  Hi Benjamin,

  Please contact Microsoft Community.

  Just a few questions first, to get a clear picture of the issue;

  1. What is the size of ICO file? Is - this (256 x 256)?

  In Windows 7, App icons and Control Panel items must be in the .ico file format and all should includes following sizes of icons.

  • 16 x 16.
  • 32 x 32.
  • 48 x 48.
  • 256 x 256.

  According to the guidelines of the screenshot, there is a difference in size ofcon I have, I suggest you to download the package of icon for the application you want to change the icons according to the dimensions mentioned above.

  Note: Display in Windows 7 allows you to make text and other items large, such as icons, on the screen you, while keeping your display to its optimal resolution.

  We answer with the result, then we can help you further.

• I can't see or access my saved PDF files (or icons) in my files or on my desktop of 64-bit windows 7 (catalyst control problem?).

  The only time where I can see them is when I'm about to save an another PDF to a file or to the desktop during 'save process' in which it contains some saved PDF files.

  I tried 'show desktop' and opening adobe reader to see the files or icons, but they will not show.

  I have a new HP computer with windows 7 64-bit and windows has failed twice. Time just after the new facility, just before I was able to create the rescue and then disk after two weeks of use; telling me to re - install! Now, months later, I have Catalyst Control Center errors / problems. So I don't know if it's all the partners. Should I reinstall windows and hope my rescue disc work?

  Maybe I should have asked "how to get a free replacement for a windows 7 lemon?

  Hello

  ·         Since when you are facing this problem?

  ·         Did you change your computer before this problem?

  Method 1:

   

  I suggest you to search for the problem in safe mode and see if it persists.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:

  I suggest to change the save location and check if it helps.

  Method 3:

  I suggest you run Chkdsk and see if it works.

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Note: Make sure that you take a backup of your data before performing the check disk on your computer.

  Method 4:

  I also suggest you to check user account again and see if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account