Function 'Internet time' will automatically refresh after reboot - please help

Similar Questions

• Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Hi all, I bought apple phone I 5s recently is the power button / stop does not. Bought in the United States, but I was shifted to the India, the works of will to guarantee in India please help

  Ask an authorized service provider regarding iPhones, a guarantee of a country may or may not be honored in another function where you take the device.

  (143868)

• I went to Adobe Creative cloud to install Bridge. I pressed the button download next to the bridge and my creative cloud now says "update installation...". "but the sequence is at 0% and will not get above. Please help me, thanks

  I went to Adobe Creative cloud to install Bridge. I pressed the button download next to the bridge and my creative cloud now says "update installation...". "but the sequence is at 0% and will not get above. Please help me thank you all

  Hello

  Please quit Setup and then exit the creative application of cloud.

  After that, restart the machine.

  Let us know if that helps.

  Kind regards

  Bani

• I recently did a factory reset on my computer and saved all my files on a flash drive when I load them onto my computer, they look all as internet files explore instead of dreamweaver files, please, help?

  I recently did a factory reset on my computer and saved all my files on a flash drive when I load them onto my computer, they look all as internet files explore instead of dreamweaver files, please, help?

  They probably had the IE icon because Windows automatically associate with IE html files.

  It is of no consequence for your work in Dreamweaver, but you can change this association if you wish.

  Go to control panel > default of programs > set Associations.

• Hello, I bought the download of Lr 5 6 Lr, and I want to validate the serienumber. But Adobe is still asking to connect to internet. Why, I'm connected. Please help ;-)

  Hello, I bought the download of Lr 5 6 Lr, and I want to validate the serienumber. But Adobe is still asking to connect to internet. Why, I'm connected. Please help ;-)

  Refer to this:

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Mylenium

• Using Vista, WiFi will not automatically connect after that reboot - config "connect automatically" will not save after reboot.

  Using my Lenovo with Vista laptop, the wireless re-does not after I stop/restart.

  I checked the "connect automatically when this network is in range" parameter in the configuration Wifi, but the box always becomes disabled after that I reload.  Why this configuration will not save after that I reload?

  How did your problem related to Windows Update?

  Post here instead, please: http://social.answers.microsoft.com/Forums/en-US/vistanetworking/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Ray with Go: rooted status will be lost after reboot?

  Hello

  I intend at the root of my Ray (GB, unlocked bootloader) in order to use Link2SD and win more memory.

  Direction: http://talk.sonymobile.com/message/142152#142152

  Since I need to root the phone, this setting will be lost after the subsequent reboot (which means, not rooted)?

  TKS,

  /arturiu

  Bobbles. It will remain the same, so don't worry

• Windows Update will not install after reboot required.

  Update of security for Microsoft Visual C++ 2005 Service Pack 1 (KB2538242).

  I'm running Windows 7 x 64.

  I have a Windows update that requires the closing down to install.   This is not, and after reboot, I have a slower computer.

  At this point, even removing the offending program would be useful.

  Thank you for your expertise.

  Hello

  Try the methods provided below and see if they help to resolve the issue.

  Method 1:

  In the case where you are not able to install specific updates then, try the troubleshooting provided in the link below steps to fix the problem.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

  Method 2:

  You can also try to reset the Windows Update components and check if that helps.

  Click on the link provided below for more information about resetting Windows Update components.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3:

  Start the computer in a clean boot state and then try to download the updates manually.

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note:

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Download the updates manually from the link provided below.

  MFC Package security update Microsoft Visual C++ 2008 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26368

  MFC Package security update Microsoft Visual C++ 2005 Service Pack 1

  http://www.Microsoft.com/download/en/details.aspx?ID=26347

  I hope this helps.

• Y580 NEW plant all the time? Can't do anything PLEASE HELP...

  I recently bought a Y580 for almost $1000 (something like 2 or 3 weeks). First of all, it worked perfectly, but yesterday I had to reboot using the button, because it crashed. Now, whenever I start it, either I get a black screen or it freezes when I open something like firefox, explore or just a folder. AND the worst thing is that Ctrl + Alt + Delete does not work so I can't open the Task Manager.

  I don't know if this can help, but once when I reboot the computer, I noticed a message saying something about Verifyhost.exe. And I don't know if it's a coincidence, but "Lenovo TouchZone" reappeared with these questions (I had deleted when I got my computer).

  I'm begging you help me please I am a student and I bought this computer because I needed a good for the College. first of all, I was happy about it but now I'm really angry and I don't know what to do. I can't contact the support cause I don't have a phone that's why I am posting this here. Please help me.

  Thank you

  I did a system restore and now everything works. Hope this helps those who have the same problem. I hope that this will never happen again - very bad experience.

• orangle flashing light on netgear wireless router, but have internet via a modem... Please help

  I am connected to the internet via an ethernet cable via the modem I have, but the netgear wireless router that I have demonstrated a blinking orange Internet when I try to connect wirelessly, I tried to reset the router and the modem and had no luck, I also tried to penetrate in the maintenance of netgear online but who also won't allow me to enter. Finally I tried to release and renew my through the cmd ipconfig and shows an error message saying that the media is disconnected... Please help me

  Hello

  I suggest you to post the same question in the NetGear forums for support on the NetGear router and check if it helps.

  http://forum1.NETGEAR.com/

• updated my photoshop in 2015 and now it will not open at all ~ please help!

  I've updated my photoshop - and I also tried to uninstall and reinstall the program, but nothing works! The program will not just open!

  Help!

  Try to manually install Camera Raw. This is 9.2 for 2015 CC: https://helpx.adobe.com/x-productkb/multi/camera-raw-plug-in-installer.html

  The most recent for CS6 is 9.1.1: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.1.1

• Loss of connection network several times a day while actively using internet. Will not stop after that.

  I read a lot of posts on the Vista network connections problems when changing modes of consumption, or when the wireless adapter is inactive. None of them apply to me because I lose my network connection when I have my laptop plugged in and I'm actively using the internet (for example, watch movies online). After trying "diagnose and repair" options, nothing seems to work. The only way I found to get internet again is to restart my computer. What makes it still more difficult, is that after that happens, my computer doesn't shut down normally. It freezes at the blue screen that says "shutting down". Whenever this problem with the network connection happens I am forced to make a difficult start (hold the power button until the power is off) if I want to use the internet again. It's only happened for about a month, and it's happened before and after that I installed Service Pack 2. I don't remember installing any software a month ago with the exception of Windows updates that I can't uninstall (the button uninstall is hidden for some updates). Any help I can get would be much appreciated because it is very frustrating to have hard to start my laptop several times a day in order to continue to work on this.

  -Sam Goodrich

  Hi Sam

  I regret that no one answered earlier.

  Since you don't have physical access to the router, this will make the diagnosis very difficult.  And, given that this problem is intermittent, once again, very hard to track down what is causing the problem.  You can very well just to lose the intensity of the signal.

  I mentioned the switch on the laptop because if anything goes wrong, who "could" cause this problem, and given that the laptop is no longer under warranty, you will not be able to have your factory repair it (for free of course).

  I don't see what other suggestions from the Forum can give you.  Once again, with this problem being sparadic (intermittent) and since you share Internet access with someone else and do not have physical access to the router for troubleshooting purposes, my hands are basically related...
  Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• ESXi 5 managing network not automatically start after reboot, or when the output of the mode standby

  vSphere 5.

  ESXi5.

  HI all 5 ESXi installed on HP BL460c G7. HP C7000 Enclouser system connected to the NAC (switch HP series A5800) via the Module HP FlexFabric 10 Gbs. The server has 6 vmcins:

  (1) management network - 2 NIC (1 GB per nic)

  (2) vMotion Network - 2 NIC (1 GB per nic)

  (3) Vitual Machine networks - 2 NIC (2 GB per nic)

  (4) zFCP - 2 network cards (6 GB per nic)

  After you restart or when the output of the mode standby, the management network starts does not automatically, you need to restart manually from the console directly. Hypervisor ISO downloaded directly from the vmware Download Center and all the recommended HP drivers downloaded and installed from HP Download Center.

  OK, another thing you could try is this change that HP recommended for my situation. The CLI performs: esxcfg-module - s "heap_max = 20971520" be2net

  and reboot. The memory default chunk size is not large enough and will change to this size in the next version of the driver.

  Also, have you tried yet 5.0 U1? There are a lot of bugs in U1.

• OSWatcher BB does not automatically start after reboot on a linux machine

  Hello
  I configured the OSW on my 2 node RAC on linux.
  When I start to startOSWbb.sh as the user oracle, it works ok.
  I installed the osw-service - 0.0.6 - 1.noarch.rpm rpm to add it to the service of linux, and indeed, he created the etc/init.d/osw.
  but after restarting the service of the OSW does not work. I see that everything has begun and has created a new folder to archive, a new vmstat.header, new vtop.tmp/tmp. but that's all.
  It is not running and it do right files in archive folder / file.
  also ps - ef | grep-i osw returns nothing
  where can I find its newspapers (saw nothing to NS)
  
  Thank you
  Yaron
  
  
  
  install oswatcher for RAC
  ============================
  
  mkdir/users/oracle/osw Pei
  CD/users/oracle/osw /.
  mkdir lxodsdb1tst
  mkdir lxodsdb2tst
  CP oswbb511_512.tar/users/oracle/osw/lxodsdb1tst
  tar - xvf oswbb511_512.tar
  CD oswbb
  
  lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb > ls
  analysis gif lock OSWatcherFM.sh oswib.sh oswsub.sh tarupfiles.sh vmstat.header xtop.sh src
  docs headers mpsub.sh OSWatcher.sh oswnet.sh profile startOSWbb.sh tmp vmsub.sh
  Exampleprivate.NET iosub.sh nfssub.sh oswbba.jar oswrds.sh pssub.sh stopOSWbb.sh topaix.sh vtop.sh
  
  
  CP Exampleprivate.net private.net
  chmod 775 private.net
  VI private.net
  
  ######################################################################
  # This file contains examples of how to monitor private networks. TO
  # monitor your private networks create an executable file in the same
  # directory named private.net. Use the example for your host below operating system.
  # Make sure that you do not delete the last line in this file. Your file
  # private.net MUST contain the line rm lock.file.
  ######################################################################
  #Linux example
  ######################################################################
  echo "zzz * '' date'.
  Traceroute - r f lxodsdb2tst-priv
  Traceroute - r f lxodsdb1tst-priv
  ######################################################################
  # DO NOT DELETE THE NEXT LINE!
  #
  ######################################################################
  Locks/lock.file RM
  
  
  ./startOSWbb.sh
  
  
  lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb >./startOSWbb.sh
  lxodsdb1tst {oracle} / users/oracle/osw/lxodsdb1tst/oswbb >
  Info... You don't have a value for snapshotInterval.
  Info... Using the default value = 30
  Info... You don't have a value for archiveInterval.
  Info... Using the default value = 48
  Defining archive log directory to/users/oracle/osw/lxodsdb1tst/oswbb/archive
  
  Test for the discovery of the utilities...
  VMSTAT found on your system.
  IOSTAT found on your system.
  MPSTAT found on your system.
  NETSTAT found on your system.
  TOP found on your system.
  
  Testing for the discovery of the OS CPU COUNT
  OSWbb is looking for the NUMBER of CPUS on your system
  NUMBER of CPUS will be used by oswbba to automatically search for cpu problems
  
  NUMBER of CPU found on your system.
  UC = 24
  
  Discovery completed.
  
  
  
  
  
  
  =================================================== on lxodsdb2tst =================================
  
  lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst > tar - xvf oswbb511_512.tar
  CD oswbb
  
  lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb > ls
  analysis gif lock OSWatcherFM.sh oswib.sh oswsub.sh tarupfiles.sh vmstat.header xtop.sh src
  docs headers mpsub.sh OSWatcher.sh oswnet.sh profile startOSWbb.sh tmp vmsub.sh
  Exampleprivate.NET iosub.sh nfssub.sh oswbba.jar oswrds.sh pssub.sh stopOSWbb.sh topaix.sh vtop.sh
  
  
  
  xodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb >./startOSWbb.sh
  lxodsdb2tst {oracle} / users/oracle/osw/lxodsdb2tst/oswbb >
  Info... You don't have a value for snapshotInterval.
  Info... Using the default value = 30
  Info... You don't have a value for archiveInterval.
  Info... Using the default value = 48
  Defining archive log directory to/users/oracle/osw/lxodsdb2tst/oswbb/archive
  
  Test for the discovery of the utilities...
  VMSTAT found on your system.
  IOSTAT found on your system.
  MPSTAT found on your system.
  NETSTAT found on your system.
  TOP found on your system.
  
  Testing for the discovery of the OS CPU COUNT
  OSWbb is looking for the NUMBER of CPUS on your system
  NUMBER of CPUS will be used by oswbba to automatically search for cpu problems
  
  NUMBER of CPU found on your system.
  UC = 24
  
  Discovery completed.
  
  From black box OSWatcher v5.1.1 Sun Nov 11 10:18:09 IST 2012
  With SnapshotInterval = 30
  With ArchiveInterval = 48
  
  OSWatcher Black Box - written by Carl Davis, Centre of Expertise,
  Oracle Corporation
  For questions about installation and use, please go to MOS (Note: 301137.1()
  If you need assistance or have any comments or improvements
  queries, you can email me [email protected]
  
  
  Data are stored in the directory: / users/oracle/osw/lxodsdb2tst/oswbb/archive
  
  From the collection of data...
  
  
  
  
  ==========================================install osw rpm===========================================
  
  quo
  CD/users/oracle/osw /.
  
  [root@lxodsdb1tst osw] # rpm - ihv osw-service - 0.0.6 - 1.noarch.rpm
  Preparing... ########################################### [100%]
  1:OSW - service # [100%]
  
  VI/etc/sysconfig/osw
  
  # Put OSWHOME in the directory where you have unpacked OSW or OSWbba
  #OSWHOME = / opt/oswbb
  OSWHOME = / users/oracle/osw/lxodsdb1tst/oswbb
  # OSWINTERVAL set the number of seconds between collections
  OSWINTERVAL = 30
  # OSRETENTION set the number of hours logs must be kept
  OSWRETENTION = 168
  # Put OSUSER to the owner of the directory OSWHOME
  OSWUSER = oracle
  
  
  
  
  [root@lxodsdb1tst osw] # / sbin/chkconfig osw on
  [root@lxodsdb1tst osw] # / sbin/service osw start

  Here's what worked for me (I had the same problem):

  I uninstalled the osw-service RPM.

  I've added in /etc/rc.local the following command:

  ~Oracle/bin/oswbb CD & / bin/su oracle-c ' source ~oracle/.osw_profile & nohup./startOSWbb.sh 60 240 > / dev/null 2 > & 1 & ".

  Where:

  ~Oracle/bin/oswbb is where I untarred archive oswbb520.tar

  ~Oracle/.osw_profile looks like this (it has the same content as the old/etc/sysconfig/osw):

  # Put OSWHOME in the directory where you have unpacked OSW or OSWbba
  OSWHOME = / home/oracle/bin/oswbb / ${HOSTNAME}
  # OSWINTERVAL set the number of seconds between collections
  OSWINTERVAL = 60
  # OSRETENTION set the number of hours logs must be kept
  OSWRETENTION = 240
  # Put OSUSER to the owner of the directory OSWHOME
  OSWUSER = oracle
  # Set the correct destination folder
  Export OSWBB_ARCHIVE_DEST = / home/oracle/log/oswbb / ${HOSTNAME}

  Published by: user13134683 on November 24, 2012 10:01

• Order of shortcuts/icons of toolbar will not remain after reboot/logoff

  Here's my situation.  I created a toolbar on the taskbar of a folder on a network drive.  The fine created toolbar and icons of shortcuts/work.  I propose the shortcuts/icons in the order I want and lock the taskbar.  The order will stay like that until I logoff or restart. As soon as I did this all the shortcuts/icons resorted themselves by name in alphabetical order with folders first.  How can I stop station on reboot/logoff, I want to keep the shortcuts/icons in order that I put them in?  Thank you. Michael

  I don't think it's possible because it deals with the taskbar as a folder and those defined to sort according to certain criteria (in alphabetical order by default).  Yes, I know it can be done in the Quick Launch toolbar and it retains the new boot boot settings - but I don't know if this is possible with the creation bar toolbars task (I don't think).

  Maybe somebody else knows how (maybe with a registry change) but I don't thnk - but it is certainly possible. even if unlikely.

  Sorry, I am unable to help you, but I think you're asking something that isn't psssible in Vista (even if it takes).

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.