Function loop Tempo in recorded track?

Similar Questions

• change the tempo of the track volume automation

  brand new GB11 user. open new song in loops. probably screwed up by setting don't not bpm to 75 at this time since I would be slipping into 75bpm titles. After slipping into 5 tracks of instruments, I used the track volume automation to them fade in and out (using points as I call them). When I closed GB11 he asked if I wanted to save, and I did. When I reopened it tracks were not aligned the same, nor the volume automation curve track (all were stretched August and longer than when I closed it). I was able to redo tracks tempo and align the, but my auto track volume curve remained tense. so, fades correspond no more.  is it possible to assign to this curve 75bpm or do I have to go back and manually make them all again? Thank you!

  You have 'Curved Automation to areas Lock' enabled in the menu 'control '?  If this isn't the case, activate this flag before moving areas. It is probably too late now, after you have moved the regions.

• Midi recording track to midi track

  How I have implemented logic to read a midi track, for example with an arpeggio on it and have it save on another track in 10.2.1? It seems that some things were moved since I finally did.

  There are a few ways to do this, but the way most free is with a plug-in called noon freeze found here.

  http://www.audiocr.com/MIDI-FX-freeze/

  You insert the plugin as the last effect in the FX slot and select record. Then recording in logic and everything that is processed on the channel strip is read by the plugin and registered as you just drag the region saved on a new track with all the FX post processed effects recorded.  Very cool.

• Why a few recorded tracks "empty" when I opened the Garageband projects on another machine?

  Hey

  I have just updated my laptop to be able to run the same version of GarageBand on my iMac and MacBook (OS X El Capitan and GarageBand v.6.0.5) and work on projects of GB on what that machine is available.

  I just tried to open a few GB on my MacBook projects (both were created on my iMac) and the recorded vocal tracks are "empty", as below.  The track from the top (purple) is any wav. file and the blue trace below is the vocal track, although it says "file not found".

  

  I copied the root folder where I save all my records in GB on my iMac to Dropbox so I could open projects GB on my laptop, so all audio files must be in the same place.  Or I make a stupid mistake?  It's really quite likely, but any help is very welcome!

  Thank you

  Rich

  I copied the root folder where I save all my records in GB on my iMac to Dropbox so I could open projects GB on my laptop, so all audio files must be in the same place.

  The problem could be the DropBox synchronization. DropBox is ideal for simple documents, but your GarageBand projects are files with databases and multimedia files inside. Synchronization can break the connection between the media files and internal databases.

  If you want to transfer projects with Dropbox, it is safest to compress the projects and move to archive compressed to dropbox.

  But see, if the media are still inside the Garageband project. Perhaps the download was not complete.

  • CTRL-click the .band file and select "Show Package Contents".
  • In the Finder window that opens, select the "Media" folder
  • Copy the audio files in this folder to a folder on your desktop.
  • Try to identify the missing audio file.  If you can find it, drag it to the track where it is absent.

• Loop through the records

  Hello

  I have the following code. It modifies the metadata of a file and it works according to the needs, regardless the fact that you must be in the image folder to change the metadata of these images. What should I change in order for me to simply open the parent directory and for the script to go through all the child pages one by one, running the script?

  #target bridge  
  if( BridgeTalk.appName == "bridge" ) { 
  var vfRename = new MenuElement( "command", "VF Rename", "at the end of Tools" , "vfRename01" );
  }
  vfRename.onSelect = function () {
  
  app.document.deselectAll();
  var thumbs = app.document.getSelection("jpg");
  for(var a in thumbs){
  var f =thumbs[a].spec;
  var parts = decodeURI(f.name).replace(/- \d+.jpg$/i,'').split('&&&');
  setMetadata( File(f), parts )
  }
  function setMetadata( file, parts ){
  var Title = parts[0].toString() + " at " + parts[1].toString() + " by " + parts[2].toString();
  var Desc = parts[0].toString() + " at " + parts[1].toString() + " by " + parts[2].toString();
  var Author = parts[2].toString();
  if ( !ExternalObject.AdobeXMPScript ) ExternalObject.AdobeXMPScript = new ExternalObject('lib:AdobeXMPScript');
          var xmpf = new XMPFile( File(file).fsName, XMPConst.UNKNOWN, XMPConst.OPEN_FOR_UPDATE );
          var xmp = xmpf.getXMP();
          xmp.deleteProperty(XMPConst.NS_DC, "title");
          xmp.appendArrayItem(XMPConst.NS_DC, "title", Title, 0, XMPConst.ALIAS_TO_ALT_TEXT);
          xmp.setQualifier(XMPConst.NS_DC, "title[1]", "http://www.w3.org/XML/1998/namespace", "lang", "x-default");
          xmp.deleteProperty(XMPConst.NS_DC, "description");
          xmp.setLocalizedText( XMPConst.NS_DC, "description", null, "x-default", Desc );
          xmp.deleteProperty(XMPConst.NS_DC, "creator");
           xmp.appendArrayItem(XMPConst.NS_DC, "creator", Author, 0, XMPConst.ARRAY_IS_ORDERED);
          for(var s in parts){
          xmp.appendArrayItem(XMPConst.NS_DC, "subject", parts[s], 0,XMPConst.PROP_IS_ARRAY);
          }
        if (xmpf.canPutXMP( xmp )) {
           xmpf.putXMP( xmp );
        }
        xmpf.closeFile( XMPConst.CLOSE_UPDATE_SAFELY );
  }
  }
  

  If (BridgeTalk.appName == 'bridge') {}

  var vfRename = new MenuElement ('order', "Rename VF", "at the end of the tools', 'vfRename01');

  }

  vfRename.onSelect = function () {}

  records of var = [];

  topLevel var = Folder (app.document.presentationPath);

  records = FindAllFolders (topLevel, records);

  Folders.unshift (topLevel);

  {(f var in folders)

  Alert (Folders [f]);

  var inches is folders [f] .getFiles ("*.jpg");.

  for (var a helping hand in) {}

  var f = [a] inches;

  var parts = decodeURI (f.name).replace(/-\d+.jpg$/i, ") .split ('& &');)

  setMetadata (file (f), parties)

  }

  };

  setMetadata (file,) {} function

  var title = parts [0] m:System.NET.SocketAddress.ToString () + "" + parts [1] m:System.NET.SocketAddress.ToString () + 'by' + parts [2] m:System.NET.SocketAddress.ToString ();

  var / / Desc = parts [0] m:System.NET.SocketAddress.ToString () + "" + parts [1] m:System.NET.SocketAddress.ToString () + 'by' + parts [2] m:System.NET.SocketAddress.ToString ();

  var author = parts [0] m:System.NET.SocketAddress.ToString () + "|" + parts [1] m:System.NET.SocketAddress.ToString ();

  Headline = parts [1] var m:System.NET.SocketAddress.ToString ();

  If (!.) ExternalObject.AdobeXMPScript) ExternalObject.AdobeXMPScript = new ExternalObject('lib:AdobeXMPScript');

  var xmpf = new XMPFile (File (file) .fsName, XMPConst.UNKNOWN, XMPConst.OPEN_FOR_UPDATE);

  XMP var = xmpf.getXMP ();

  xmp.deleteProperty (XMPConst.NS_DC, "title");

  xmp.appendArrayItem (XMPConst.NS_DC, "title", title, 0, XMPConst.ALIAS_TO_ALT_TEXT);

  xmp.setQualifier (XMPConst.NS_DC "title [1]", "http://www.w3.org/XML/1998/namespace", "lang", "x - default");

  xmp.deleteProperty (XMPConst.NS_DC, "description");

  xmp.setLocalizedText (XMPConst.NS_DC, "description", null, "x-default", Desc);

  xmp.deleteProperty (XMPConst.NS_DC, 'creator');

  xmp.appendArrayItem (XMPConst.NS_DC, 'creator', author, 0, XMPConst.ARRAY_IS_ORDERED);

            

  for {(var s in parts)

  xmp.appendArrayItem (XMPConst.NS_DC, "subject", parts [s], 0, XMPConst.PROP_IS_ARRAY);

  }

  If (xmpf.canPutXMP (xmp)) {}

  xmpf.putXMP (xmp);

  }

  xmpf.closeFile (XMPConst.CLOSE_UPDATE_SAFELY);

  };

  function FindAllFolders (srcFolderStr, destArray) {}

  var fileFolderArray =. getFiles() folder (srcFolderStr);

  for (var i = 0; i)< filefolderarray.length;="" i++="" )="">

  var fileFoldObj = fileFolderArray [i];

  If (fileFoldObj instanceof File) {}

  } else {}

  destArray.push (Folder (fileFoldObj));

  FindAllFolders (fileFoldObj.toString (), destArray);

  }

  }

  Return destArray;

  };

  };

• A function can be called record group - Oracle Form 6i.

  Hi all

  I want to create query based LOV in Oracle Form 6i.

  The query I have use of the record group is as follows:

  SELECT DISTINCT

  Nr.rec_locator AS rec_locator,

  car.car_dte AS car_date,

  Get_car_info(:CON.) REF_NO) AS car_number

  Car_list_entries CAR

  contact_details cdt,

  name_records nr

  WHERE car.car_id = cdt.car_id

  AND cdt.nr_id = nr.id

  AND cdt.con_ref_no =: CON. REF_NO

  / * Get_car_info (x NUMBER) is a function of form * /.

  This generates an error:

  It is said

  FRM-12001 (impossible to create the Group Record (check your query)

  
  

  Kindly guide how can I use the function of form to achieve the desired result.
  

  Thank you very much

  Anoop.

  Hi Anoop,

  I can assure you that the issue is not because of the called function of the record group.

  I used the query showing the value of the function; but one thing you should keep in mind is:

  If you create a new item not related in a based lov to sql expression that

  return a character data type, and if the element related to the used in the function

  is generated with a size of 0, then the item not related is generated

  with a size of 4000 and a compilation of the form failed with error FRM-30187

  the solution to this problem is: lov property > column specification > columns one will be having a greater length and 2000 it set its 2000 which is the maximum value. Then it won't work.

• Oracle function to retrieve the records randomly

  I need function to select a random DB folder.

  For example, we have 500 records and an input to the function value is 5 ways, it must display the records randomly between 1 to 5

  Thank you

  Question is not clear, I thought that Oracle has always returned entries in random order... Do you expect the number of records between 1 & 5?

  Kind regards

• Function Rank and duplicate records

  Hello
  
  I have the following table:
  
  CREATE TABLE A_TEST (AN INTEGER, B INTEGER, INTEGER C D INTEGER, CHAR (11) PAVILION);
  
  INSERT INTO A_TEST (A, B, C, D) VALUES (1,2,3,4).
  INSERT INTO A_TEST (A, B, C, D) VALUES (2,4,5,8);
  INSERT INTO A_TEST (A, B, C, D) VALUES (1,2,3,4).
  INSERT INTO A_TEST (A, B, C, D) VALUES (2,4,5,8);
  INSERT INTO A_TEST (A, B, C, D) VALUES (7,2,3,4);
  INSERT INTO A_TEST (A, B, C, D) VALUES (9,2,3,4);
  INSERT INTO A_TEST (A, B, C, D) VALUES (7,2,3,4);
  INSERT INTO A_TEST (A, B, C, D) VALUES (1,2,3,4).
  INSERT INTO A_TEST (A, B, C, D) VALUES (5,4,5,8);
  INSERT INTO A_TEST (A, B, C, D) VALUES (2,2,3,9);
  INSERT INTO A_TEST (A, B, C, D) VALUES (2,4,5,8);
  INSERT INTO A_TEST (A, B, C, D) VALUES (6,2,3,4);
  INSERT INTO A_TEST (A, B, C, D) VALUES (1,3,3,4);
  INSERT INTO A_TEST (A, B, C, D) VALUES (8,2,8,4);
  
  
  "I want to perform an update on the FLAG column by setting"D"if it's a record.1, 2, 3, 4 in doubles);
  
  
  I would use the rank function.
  
  Desired update:
  
  A B C D FLAG
  1 2 3 4
  2, 4, 5, 8
  1     2     3     4     D
  2     4     5     8     D
  7 2 3 4
  9 2 3 4
  7     2     3     4     D
  1     2     3     4     D
  5 4 5 8
  2 2 3 9
  2, 4, 5, 8
  6 2 3 4
  1 3 3 4
  8 2 8 4
  
  
  Thank you

  I guess that your output is not correct for '2 4 5 8', it shows two as valid records and only one record as duplicate. If you are right, you must explain the logic.

  something like that...

  update a_test b
     set b.flag = 'D'
   where b.rowid in (select row_id
                       from (select a.rowid row_id,
                                    a,
                                    b,
                                    c,
                                    d,
                                    rank() over(partition by a, b, c, d order by rownum) rn
                               from a_test a)
                      where rn > 1)
  

• Bug LV2011 - error wired to Boolean function breaks during the recording of the previous version

  I just download LabVIEW 2011 this morning. I created this VI and recorded for LV2010 see how he would deal with it. I opened the VI in LabVIEW 2010SP1 and the thread of the error is broken. There is no warning about the problems in recording this VI under an earlier version.

  

  
  

• Analytical function - County not null record

  
  Hi all

  Is it possible to count the column records is not null using anlaytical?

  Count (Column = 1) on)

  Thank you.

  «count (col) over (...)»  counts only non-null values...

  Some examples of data with tables to create and insert queries so that we can help you...

  See you soon,.

  Manik.

• Using the function count with grouped records

  Hi all
  
  This seems like it should be very easy, but I still have to find a simple way to do it.
  
  Suppose I want to count the possibilities which are grouped by Sales Rep at run time I filter this list with a parameter for sales stage and created date.
  I've simplified this greatly, but here's what my setup looks like now:
  
  Sales representative*-Count* _
  <? for-each-group: opportunity [SalesStage = param1 and creation > param2]; /SalesRep? >
  <? SalesRep? >-<? count (current - group (available))? >
  <? end for each group -? >
  _ Total
  
  The only solution I have to get my grand total so far is to create a variable and permanently keep a total that I will then display in the Total column. It all works, it seems that there should be an easier way, want to do a simple count (Id) for a total general. But given that the Total amount will appear after the end of each group-, I lose the filter that has been applied to the group so that the count is not valid.
  
  Ideas of the experts?
  Thank you!

  To get the total general
  use

  param2]/Id)?>
  

  Since you have not mentioned the complete xml code, I assumed, as the root.
  If this isn't the case, put the full path from the root.

  If you give some xml examples and explain the output you want, we can fix it immediately.

  go through these too... something can be drawn from here.
  http://winrichman.blogspot.com/search/label/summation%20In%20BIP
  http://winrichman.blogspot.com/search/label/BIP%20Vertical%20sum

• Apple Loops and tempo (distortion)

  Hi, I am really desperate to try to find a solution to this problem. But it seems that no one knows the same thing.

  I just purchased Logic Pro X. Im using a macbook mid-2014 race 13-inch pro retina El Capitan 10.11

  The problem is really weird. When using some Apple Loops loops and change the tempo of my project I get these really annoying audio distortions on the loops.

  I do a lot of original audio loops tempo change. The best example I can get is changing 128bpm (which is the tempo of the loop) at 130. Or 125 to 130. And I get this kind of flanger/distortion. Don't know how to describe it exactly.

  Some loops that I use are:

  -Jazz trance Beat 02

  -Garage atomic Beat 01

  Someone knows a solution? Or anyone having the same problem?

  Thank you very much!

  You have successfully updated to 10.2.1 LPX?

  I tested these two loops by dragging them into a new project, speeding up the tempo up to more than 150 and back again... and heard nothing unusual...

  There is always a small amount of audio artifacts as you are speeding an audio file (the process requires some audio data jump/compression...) and not a MIDI... but again, nothing, I would say, approached distortion...

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• How to do a loop function?

  I looked through the documentation on a loop, but I do not understand.  I'm doing this function loop, until the user stops it:

  function playMusic(evt:MouseEvent):void
  {
  Channel.Stop (); to prevent users to start the file several times above the other - is there a better way to do it?
  Channel = myMusic.play (songPosition);
  myTimer.start ();
  }

  I'm new to flash, as well as near terms of wailing as possible would be appreciated.

  I have a crew a bit. The main thing was to listen to the SOUND_COMPLETE event. So, here's something that works mainly (I tested) - just pasted the code like this:

  stop();
  import flash.events.MouseEvent;
  import flash.media.Sound;
  import flash.net.URLRequest;
  import flash.media.SoundChannel;
  import flash.media.SoundTransform;
  import fl.events.SliderEvent;
  import flash.utils.Timer;
  import flash.events.TimerEvent;
  import flash.media.SoundLoaderContext;
  import flash.events.Event;
  
  var soundFile:URLRequest = new URLRequest("1.mp3");
  var soundFile1:URLRequest = new URLRequest("2.mp3");
  
  var song:Sound;
  var channel:SoundChannel;
  
  var s_Transform:SoundTransform = new SoundTransform();
  var myTimer:Timer = new Timer(250);
  myTimer.addEventListener(TimerEvent.TIMER, updateTime);
  
  var songPosition:Number = 0;
  var myContext:SoundLoaderContext = new SoundLoaderContext(5000);
  
  // both buttons call the same function
  btn_play.addEventListener(MouseEvent.CLICK, playMusic);
  btn_play1.addEventListener(MouseEvent.CLICK, playMusic);
  btn_stop.addEventListener(MouseEvent.CLICK, stopMusic);
  sld_volume.addEventListener(SliderEvent.CHANGE, changeVolume);
  btn_pause.addEventListener(MouseEvent.CLICK, pauseMusic);
  
  function pauseMusic(e:MouseEvent):void {
       myTimer.stop();
      songPosition = channel.position;
      channel.stop();
  }
  
  function onSoundComplete(e:Event):void {
       channel = song.play(0);
  }
  
  function convertTime(ms:Number):String {
      return new Date(ms).toUTCString().replace(/(\w+\s){2}+\d+\s{1}\d+\:|\s\d+\s\w+/g, "");
  }
  
  function updateTime(e:TimerEvent):void {
      LBL_songtime.text = convertTime(channel.position);
  }
  
  function getSongLength(e:Event):void {
      LBL_songtotal.text = convertTime(song.length);
  }
  
  function changeVolume(e:SliderEvent):void {
      s_Transform.volume = sld_volume.value;
      channel.soundTransform = s_Transform;
  }
  
  function stopMusic(e:MouseEvent = null):void {
       myTimer.stop();
       if(channel) channel.stop();
       songPosition = 0;
  }
  
  function playMusic(e:MouseEvent):void {
       stopMusic();
       song = new Sound();
       switch(e.currentTarget) {
            case btn_play:
                 song.load(soundFile, myContext);
            break;
  
            case btn_play1:
                 song.load(soundFile1, myContext);
            break;
       }
       channel = song.play(0);
       channel.addEventListener(Event.SOUND_COMPLETE, onSoundComplete);
       myTimer.start();
  }
  
  txt_area.htmlText = "
  testing
  ";
  

• A loop in the Variable XML records!

  Hello

  I get no way how to do this. I get the XML below from a custom component of DSC. Now, I need to treat it.

  <root>
      <records total_records="4">
          <record>
              <jobno>1122</jobno>
              <cust_name>Abhinav</cust_name>
              <email>[email protected]</email>
              <stat>1</stat>
          </record>
          <record>
              <jobno>2233</jobno>
              <cust_name>Doctor Dhober</cust_name>
              <email>[email protected]</email>
              <stat>0</stat>
          </record>
          <record>
              <jobno>4666</jobno>
              <cust_name>Vinau Dubey</cust_name>
              <email>[email protected]</email>
              <stat>1</stat>
          </record>
          <record>
              <jobno>7677</jobno>
              <cust_name>Nelesh Poda</cust_name>
              <email>[email protected]</email>
              <stat>0</stat>
          </record>
      </records>
  </root>
  
  

  Now, I have to loop through each record & to do something for each of them. In my approach, I must send a mail to each user in the XML file. I tried using the Set selector to SET the node VALUE, but without success. Any help.

  Thank you.

  
  -

  Afonso

  Your xpath does not match your XML code - you're missing the root node in your xpath expression:

  Expression: /process_data/myXML/records/record[1]/email
  

  must be:

  / process_data/myXML/root/records/plug [1] / email

  When you build your loop there is another thing to be careful.  If you evaluate a variable xpath within another xpath expression, it gets inserted string.  This happens even if the variable is an integer.  For example: if I have a whole variable counter that is equal to 3 and evaluate:

  / process_data/myXML/root/Records/record [/process_data/@counter] / email the xpath expression will insert "3" (a string) and not an integer, as you can imagine.  The result will not be the third node. This can be a source of frustration, and it's difficult to debug.

  Instead, use the number inside the expression:

  / process_data/myXML/root/Records/record [number (/process_data/@counter)] / email

  I've attached an example of process that shows this.