FUNCTION PROGRESS LANE

Similar Questions

• A second non-functional progress bar is always visible on the status bar, how do I get rid of him?

  The second bar is inside the handle of resizing on the right side of the status bar. It does nothing, but takes place. The functional progress bar appears only when it is used inside Panel outside panel of authentication on the left side of the status bar and message. I turned the status bar and turn on again - no luck. I also tried to disable all the modules - no luck. I also changed the themes - no luck. I have to re - install the browser?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  If this does not work in safe mode and then disable all your extensions and then try to find out who is causing by allowing both the problem reappears.

  You can use "Disable all add-ons" window the startup of Firefox to solve the issues in Safe Mode to disable all extensions.

  You will need to close and restart Firefox after each change via "file > exit ' (Mac: ' Firefox > leave";) Linux: "file > exit ')

  If you have many extensions then you first activate half test extensions that half the problem.

  Continue to divide the bad half that still has the question until you find that one is causing it.

• Portege 3940ct OS upgrade to function disabling Lan of XPSP2-Driver issues

  I have canvassed all discussions on this forum (and others) and have not found a solution to my problem. But, its obvious that major thinkers on Toshiba laptop configuration problems are here. So, if there is a solution to my problem, my best shot is in this forum.

  I'm pretty advanced in troubleshooting on this issue and the only thing that makes me think that there is a solution, it is it seems that others have installed XP on this unit.

  I have a ct of 3940; I upgraded from W2kPro to XPSP2;
  I downloaded and installed the bios, drivers and toshiba utils for unity on the Toshiba site.

  I have confirmed that all components of the system are operational. This includes a cdrom pcmcia, a network port replicator

  Everything is beautiful... EXCEPT:

  I have no network function.

  Indeed, I have basically no internet communication that it works either - even through the modem. The modem composed and as soon as the provider of the Internet service provider sends a handshake of communications, Windows XP Home edition do not recognize and disconnects. (I have not tried to fax a document - but I don't think that is relevant to the problem).

  Indeed, any type of network connection device, I try to install on the device, the device driver is not installed. This includes the network cards pcmcia (Wi - Fi 10/100 and base a - g) and usb based of a to g wireless adapters.

  Initially, after the installation of Windows XP Home edition, I found that I could not get a connection to the local network through network port replicator.

  To power on, loads WXP b/f, the network port replicator connection LEDs indicate a connection. Once expenses WXP, the port is disabled. [All other functions on the Port Replicator is operational under WXP].

  After logging in to Windows XP Home edition, Windows XP Home edition detects "new hardware" and produced through the driver install process. He then began to try to install an "unknown device". Ithen reports thatit can not locate a driver, then prompt for the user at the end of the routine of material to add.

  Device Manager reports several devices with yellow warning flags indicating that the device driver could not be installed.
  A look at the Details tab on the "unknown device" (the tab 'network device') indicates that the driver who has a problem is 'rasirda.sys '. Device Manager will not allow the device to uninstall.

  Other devices that have the yellow flag are:
  1 Toshiba FIR Port Type-D0
  2 IrDA Protocol (hidden feature)
  3 TCPIP (hidden feature)
  and a network card, I try to install.

  Facilities of device driver for network adapters, including the network port replicator controller (Intel 8255 x based pci Ethernet adapt (10/100) and his sister pilot), does not install (and will not uninstall until the device is removed).

  A glance at the window of the administrator system "Services" shows that essentially all the services necessary to support network/internetrleated services are disabled. Dependencies show that all these services depend, directly or indirectly, on "services.exe". This service will not run, and when the service is to begin, WXP reports that the service.exe does not start the program described.

  Topic 'Information System', a glance at the 'network' tab indicates that there is an adapter called "RAS Async card" disabled.

  My first approach to this problem was to reinstall the update of the Toshiba driver for the controller Toshiba FIR. Nothing helps.

  The next thought was simply to disable the function of TREE, but that cannot be done at the level of the bios... and well, as ambitious as I am, I didn't venture into the machine to determine if the IR controller could be disconnected or removed from the system board. [But if it is a possible solution, then I'll go...]

  As noted above, the only reason for which I hope is it seems that others have run successfully of XP on the 3xxx series porteges, who, to my knowledge all have this same IR port. Also, Toshiba has even written an XP driver for the device.

  What I find curious, among other things, is that Device Manager reports the Rasirda.sys device on the network adapter tab. I would have thought it would have been reported under the 'no plug and play' or the tabs 'system device. Whatever it is, it seems that Toshiba has implemented the infrared device such as a network adapter, or at least that's how WXP is grateful.

  I searched the internet, on the site of Toshiba, microsoft XP, knowledge databases, Web pages etc. and did not meet all the remarkable solutions se... Although I enjoyed some of the protocols troubleshooting - not my real ambition.

  Bottom line, is that I have this computer connected to the internet. With all protocols, and internet communications services disabled, even through the modem... Well, its ridiculous. I can't yet register WXP! Absurd is that! Well well its been late.

  I hope someone will have a solution/workaround solution that will solve this problem.

  In the meantime, I think that the next step is to start over and reinstall XP and try... again.

  I'd appreciate any help that anyone can gather.

  Hello Andrew

  It's always interesting that a lot of users are trying to install WXP on older models. Respect! The problem is that 3xxx Portege is not supported for Windows XP Home edition and I wonder that you have found the drivers and tools for this device. On Toshiba Europe don't here are some drivers for Windows XP Home edition and I assume you found the download of some of them on Toshiba U.S. page.
  Am I wrong?

  Sorry but I have no concrete solution to your problem

• Equium A100-063: I need Windows XP drivers for it!

  I'm Italian so excuse me for my English, please!
  I have a Toshiba Equium A100-063 with windows Vista installed. I have my backup partition then format and install Windows XP pro sp2.

  On the main site and the support site, it is not called as my Toshiba Notebook: Satellite A100-063. Where can I find the drivers? I have download the drivers a lot of producers of chips, installed them and all the right function except LAN port.

  Can someone tell what kind of chip that model uses?
  Thank you

  As mentioned above, you won't find the name of mobile integer in the form of driver download but the part of the serial number. You must choose the Equium A100 (PAAS)

  Go to the Toshiba Europe site:
  http://EU.computers.Toshiba-Europe.com/-> support downloads & -> support-> driver downloads home page

  You should read the information in the installation instructions. You must follow the installation order in this document.

• Scroll event: movieclip instead of dynamic text

  Hello everyone. I am very very new to actionscript, so probably my question sounds a bit ridiculous.

  I'm putting an Arabic text to scroll with a custom scroll bar. So I found a nice video in youtube , all this with a dynamic text field. It works wonderful for Latin characters (from left to right and separated from the letters) but unfortunately not for Arabic characters (they don't connect). In fact, I do not use just a movieclip with the text instead of the dynamic text field. But I don't know how to change the actionscript code for the video instead of the dynamic text field.

  Here I show you the code for the scrolling text in a dynamic text field (it's a small code), on the stage, I got just the dynamic text field (instance name: texto_txt), the scroll bar (a vertical line, the name of the instance: scrollBar_mc) and the scrolling itself (a small rectangle, the instance name (:scrollHandle_mc):

  var content: String = "cjeihfirehjfejlkfjkerjfirjfejifjrijwkjfirwjeknlkkkkkkkkkkkkkkkkkkkkkkkkkkkkkkllllllll";
  
  texto_txt. Text = content;
  texto_txt.WordWrap = true;

  var min: number = scrollHandle_mc.y;

  var max: number = min +(scrollBar_mc.height-scrollHandle_mc.height);

  var range: number = max - min;

  var arrastrando: Boolean = false;

  the var limits: Rectangle = new Rectangle (scrollHandle_mc.x, scrollHandle_mc.y, 0, scrollBar_mc.height - scrollHandle_mc.height);

  scrollHandle_mc.addEventListener (MouseEvent.MOUSE_DOWN, arrastrandoScroll);

  stage.addEventListener (MouseEvent.MOUSE_UP, stopIt);

  function arrastrandoScroll(mouseEvent:MouseEvent)

  {

  scrollHandle_mc.startDrag (false, bounds);

  arrastrando = true;

  scrollHandle_mc.addEventListener (Event.ENTER_FRAME, progress);

  }

  function stopIt(mouseEvent:MouseEvent)

  {

  scrollHandle_mc.stopDrag ();

  arrastrando = false;

  }

  function progress(e:Event)

  {

  var moverScroll:Number = scrollHandle_mc.y - min;

  var p: Number = moverScroll/range;

  If (arrastrando is true)

  {

  texto_txt.scrollV = % * texto_txt.maxScrollV;

  }

  }

  What I want to do is clear the dynamic text field and use rather a movieclip (text_mc) which already includes the text, the bounding box would be a mask. How can I change the actionscript code? Could someone help me?

  It isn't really a question of mathematics, as it is a logical reasoning, but if you plan to do things with the lineup, you expect better familiarize themselves with the learning of mathematics as well.  Programming and math go hand in hand.

  This is a simplified explanation of what your code should-> if you move the wheel of 25% of the total distance, it can move, then the movieclip should be moved 25% of the distance, he can move (in the sense of oppostie).

  Your scroll handle can be moved from a predefined distance.  In your code, this is called the "range".  See if you can understand how this value is determined in 3 lines of code.

  var min: number = scrollHandle_mc.y;

  var max: number = min +(scrollBar_mc.height-scrollHandle_mc.height);

  var range: number = max - min;

  Later depending on your progress, you can see where the handle of the scrollbar values com into play again to determine where to place the textfield object.  But if we change that to be the movieclip, it becomes more similar to the following...

  function progress(e:Event)

  {

  var moverScroll:Number = scrollHandle_mc.y - min;

  var p: Number = moverScroll/range;

  If (arrastrando is true)

  {

  yourMC.y = % * (yourMCmaxY-yourMCminY) + yourMCMinY;

  where yourMCmaxY-yourMCminY's range of movement of the mc

  who is likely to be negative since yMax is likely< ymin="" for="" the="">

    }

  }

• Display the progress bar when you use the Calculate function

  Hello

  For my project, I need to convert the raw values of a signal in physical quantities.

  To do this, I use the function "calculate".

  Because I have a lot of data, it takes time, and the user does not know if it works or not.

  The first thing I did, is to Add Dialog.BeginWaitCursor and Dialog.EndWaitCursor which works well, but is not enough.

  To view activity, I want to display a progress created bar before calling 'Calculate' and stopped after that.

  The progress bar does not need to show real progress, but displayed only a movement of progress even if it again to zeor until the end of the calculation.

  I have read some information on the progress made on this forum, but he did on selfmade function and tiara not call functions.

  This is why it is not useful to me.

  I don't know how to do this using vbs.

  Is it possible to create something like this?

  The best solution would be to get the status of the function of 'Calculate' to see where he is, but the function is not created to do this.

  Thanks for all the ideas,

  Best regards

  CFOE

  Hey CFOE,

  I asked R & D at the same time, because I thought I remembered seeing a progress bar continued in tiara before, but I didn't know if it was something we might call with a VBScript command.  I just heard back that you can, and it's here...

  Call AutoLoopInit
  
  MsgBox "ready to stop the progress bar?
  
  Call LoopDeInit

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• How to add a progress bar in a function that is called recursively

  How to add a progress bar in a function that is called recursively

  Hello

  You can use ScriptUI to create progressbar in your script. Here is an example on how the progress bar can be created:

  var progressRes = "dialogue."

  {\

  text: "Auto Collection,"------

  preferredSize: [450, -1],

  View1: Group\

  {\

  alignment: 'fill', orientation: 'column ', \

  _label: StaticText {alignment: 'left', text: 'reviewing the images...} »}, \

  _Progress: Progressbar {alignment: 'fill', properties: {name: 'progress'}}, \

  _startAndCancel: button {text: 'Start',------}

  started: false, cancelled: false,

  Properties: {name: 'Cancel'} \

  },\

  }\

  }";

  var progressWindow is new window (progressRes);.

  progressWindow.progressBar = progressWindow.findElement ("course").

  progressWindow.cancelButton = progressWindow.findElement ('Cancel');

  progressWindow.cancelButton.onClick = function()

  {

  If (this.started)

  This.Cancelled = true;

  else {}

  This.Started = true;

  This.Text = "Cancel";

  this.window.startWork ();

  }

  }

  Start the 'work' when you click the Start button

  progressWindow.startWork = function()

  {

  While (this.progressBar.value< this.progressbar.maxvalue="">

  ! this.cancelButton.cancelled)

  {

  this.progressBar.value = this.progressBar.value + 1;

  This.Update();

  this.workFunction ();

  }

  progressWindow.close (this.cancelButton.cancelled? 1: 2);

  }

  progressWindow.workFunction = function()

  {

  $.sleep (500);

  }

  progressWindow.setMax = function (maxval)

  {

  progressWindow.progressBar.maxvalue = maxval;

  progressWindow.progressBar.value = 0;

  }

  progressWindow.setText = function (label)

  {

  progressWindow.children [0] ['_label'] .text = label;

  }

  -test code

  function progressTest()

  {

  progressWindow.setMax (8);

  var result = progressWindow.show ();

  Do something with result...

  }

  progressTest();

  Thank you

  -Anshul

• CS3 JS progress bar function

  I am trying to create a progress bar function, but the code below creates 6 instances of the progress window rather than the update info in the first window.  I went for the loop process making progress work bars is the only way that it can be used or is it possible to tell if a window is open on if so update the bar and the news of this window?

  to call to the stand, I use stagesLeft ("search duplicates", 1)
  

  
  
  function stagesLeft(myText,stageVal){
      
      var myStop =6;
      var myPbValue = stageVal;
      var myWindow = new Window ( 'window',' Progress');
      var myProgressBar = myWindow.add ('progressbar', [12, 12, 350, 24], 0, myStop);
      var myStaticText = myWindow.add('statictext');
      myStaticText.bounds = [0, 0, 340, 20];
      myStaticText.alignment = "left";
      
          myWindow.show();
          myProgressBar.value = myPbValue;
          myStaticText.text = myText;
          myWindow.text = 'Stage '+ myPbValue + ' out of ' + myStop;
   
          
          if(myPbValue == 6){
          myWindow.close();
              }
      }

  ScriptUI needs time to get used to :-) A 'simple' progress bar was also my first try and I think that I made similar mistakes. But nothing to worry about.

  The reason why you get more than a window, of course, is that this line in your service:

  myWindow = new window...

  (and later myWindow.show ();)

  You must create the window (and in most cases, immediately Show it) somewhere at the beginning of your script in an initialization phase. Who will pop to the top of the window in the State you created. Check the variable containing the window a global, so you can access them even when you use functions to 'drive '.

  In your update loop, you only need to change the elements: myProgressBar.value, myStaticText.text and myWindow.text. ScriptUI is smart enough to check if items are on the screen and change them immediately.

  Only when you have finished processing, you call myWindow.close ().

• Windows media player shuffle function does not work repeat the songs for two lanes

  I run windows 7 and Media player as my player used by default since I use a computer a decade ago, I find it does everything what I want (in general), however, recently, when I open him and invariably put to play a playlist, if it's the shuffle, it seems to alternate between two songs, I then go manually click on another track that , for some reason, seems to sort it out. Any ideas please? Martin.

• I need help in creating a connection to the LAN in my network connections.

  I recently performed a clean installation of XP Pro and I am unable to connect to the Internet. In my network connections, I have only the 1394 connection, but no connection to the local network.

  I've also included five devices problem identified by the Device Manager which are be annoying because no driver seems to be responsible.

  Problem of devices in Device Manager:
  
  1 Ethernet Controller PCI VEN_8086 & DEV_1050 & SUBSYS_815C104D & REV_024 & 2E98101C & 0 & 40F0
  The drivers for this device are not installed.
  
  2. multimedia Audio Controller r PCI VEN_8086 & DEV_24D5 & SUBSYS_815B104D & REV_023 & 267A616A & 0 & FD
  The drivers for this device are not installed.
  
  3. network controller PCI\VEN_1814 & DEV_0201 & SUBSYS_00321737 & REV_014 & 2E98101C & 0 & 50F0
  The drivers for this device are not installed.
  
  4. Modem PCI PCI VEN_8086 & DEV_24D6 & SUBSYS_8128104D & REV_023 & 267A616A & 0 & FE
  The drivers for this device are not installed.

  5 series  
  ROOT\LEGACY_SERIAL\0000
  This device is disabled.

  I have a Sony VAIO Modem Lite-on CNR model - 002 # / A18 and tries to pick up a signal from my router AirLink Wireless Lan and Port wide band a few feet skinny feet away.

  I've already lost most of the day diddling with half a dozen pilot search utilities that are imposed to the be me these sites with databases of driver. I managed to make no progress whatsoever other than to download several useless versions of .net software framework (required by these programs of research of sadistic driver update!

  My hardware should not be a problem because the system was functional in terms of access to the Internet only a few days ago.

  Can anyone offer suggestions that could help me solve this puzzle?

  RangerDude

  There is no LAN or wireless connections because the drivers are not installed for Ethernet controller and network controller.

  If your computer came with a disk of driver installation, use it to install the drivers.  If it does not, use a different computer to access the web site of your computer manufacturer and download Windows XP drivers for your computer model.   Then transfer them to your computer and install them.

  Boulder computer Maven
  Most Microsoft Valuable Professional

• My playlists on apple music continues to repeat the first progress song and custom to the next song

  My playlists on apple music continues to repeat the first progress song and custom to the next song

  Hi, tabby1008!

  Thanks a lot for the use of Community Support from Apple! After reading your post, I understand that when you listen to music from Apple, one song keeps repeating instead of skip to the next track, when it finishes. I wouldn't listen to the same song over and over again when Apple's music catalog is so big, so I'm happy to help you!

  First of all, check that the "repeat" feature is not enabled. The following article gives some information about the feature 'repeat' and what to look for.

  Use of music music Apple in the app

  The "Shuffle and repeat your music" section provides this information:

  Shuffle or repeat your music

  Press on at the bottom of the playback screen to mix songs in a playlist or album. Alternatively, you can ask Siri to scramble your music.

  Type once to play entire playlist or album looped or twice to repeat a song.

  When activated, the icon for a repetition will be "BOLD". If this is the case, type just the icon to activate the recurrence at the wide. The next page of this article will show you where these buttons:

  

  If the repeat function is turned off, try closing the music app using the steps described in the article below.

  Force a nearby application on your iPhone, iPad or iPod touch

  Once the music app is closed, press the icon to open it again and then try to play your songs. If one is always repeat, restart the device. Instructions on the way can be found in the following article.

  Restart your iPhone, iPad or iPod touch

  Good listening!

• There was formerly a progress bar for when the e-mails were being downloaded. It has now disappeared. What happened to him?

  My e-mail provider does not always play nice. There has always been a progress bar in the status bar to indicate that the emails were download correctly. If I don't see the progress bar, I knew to check with the provider. Recently, the progress bar went, and I have no way of knowing whether or not the emails are downloading. They appear any kind of surprise. In addition, I used to send a message that there is no new messages availalble to download (if there is no message to download) on the status bar even. He went as well. I have so no way of knowing if I get no messages because there is no, or if I don't receive messages because the provider did something. So my question is: is this an error with Thunderbird or was there an update which resulted in a loss of function that I relied on? If it's an error, what should I do about it?

  Good to know. It has been long since this problem was asked about. I thought Ad Blocker had fixed their add on.

  You mark this as resolved if it is satisfied? Thanks for the update of the question in order to help the next user of Thunderbird.

• T Bird 31 crashes / stands on many functions

  At the T Bird 31 upgrade and since then I had frequent stalls / freezes that seem to occur more frequently when uploading or sending emails. As will happen, but not as often, when moving from one account (inbox) to another account (Inbox). Frequency is almost all the time but seems to worsen the long T Bird runs. A typical example of the stall: send a message, up to just send message and bar progress dialog box. Progress bar goes to 100% (green all the way and said 100%) and then crashes. The mail has been sent! T Bird and then finally is completed the number of seconds to minutes or if I try to do something else in T-Bird I get the header (not responding) and subsequently (sometimes) gray out. The Windows Task Manager shows nothing special, no HI CPU, disk or limited resources in T-Bird or system activity. During this condition other applications, including FireFox will continue to function properly.

  Your Setup: Windows 7 Home Premium. Last M-Soft fixes 64-bit machine (August Patch Tuesday) and OS, 16 GB, lots of spare, no fragmentation. Also run FireFox (current version) as your primary browser without problem. T Bird has 5 accounts, 4 POP and 1 Gmail and several thousand message. The number of messages has changed LITTLE since well before the problem started. I also recently compacted files and emptied the Recycle Bin.

  Recently, or about the same time installed McAfee Total Protection 2014 after years with Norton/Symantec. I have disabled the add-in McAfee in T Bird but not deleted the add-in or application of McAfee. Is it an interaction that I should be aware of?

  briank550,

  tweaking of McAfee help you?

• When it is connected to the LAN, FF cannot find servers; no problem with the wi - fi

  26.0 Firefox running on a Windows 8.1 System. The thing I meet is this: I have no problem loading of pages and surfing when I am connected to my wi - fi network (I have a double function modem that wireless and LAN at the same time). However, whenever I plug the LAN cable, I get the error message that Firefox can't find the server. In this case if I disconnect the wireless at the same time. BUT, if I continually press the button [start] or simply tap the icon reload the page in the address bar, will eventually load, usually after a few failed attempts. However, the page loads usually only partially in a first time, apparently without advanced HTML formatting. But, after clicking on reload again one or two times, the page loads normally. Unknown, is that the behavior is not consistent - some pages of charge very well. But I can't for the life of understand me a boss.

  I've tried troubleshooting by disabling NoScript, but it doesn't seem to make a difference.  It's almost as if the wait time for a response from the server is so minimal when connected to LAN that the server has no chance of loading the first time.  Does that make any sense?  If so, how can I go about fixing the issue?
  

  Thanks for any help you can offer on this (for me, anyway) head-scratcher.

  Maybe another DNS server is used or there is still cached data.

  Have you tried a hard facing to bypass the cache to refresh all files?

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  You can also try to switch to work offline/off voltage after changing the network connection.

  If is also possible that your firewall treats the Wi - fi connection other than the connection to the local network.

• Tecra A11 - 17 C - impossible to boot from LAN

  Hello

  For the last few days I worked on a Toshiba Tecra A11 - 17 c PTSE0E - 02W01GEN.

  I work in a school and we have about 15 of these laptops. I was not the person who did the origonal installation and this person has not left.

  One of the computers needed a re - build. We use an installation of LAN to windows 7 so I put prioraty device that the network card, save it and re - start.

  Then, sometimes with the error PXE - E61 Media Test failed, check the cable.
  Now, I know the NIC works fine beuse it worked before I did any messing around.

  I then checked the other laptop and I get the same error PXE - E61 Media Test failed, check the cable and they all fully functional network ports.

  So I thought ok there is something in the BIOS.
  I found nothing apart an Enable lan option that is enabled.

  It was suggested to relax the default BIOS and then format the hard drive.
  So I thought ok well first I'll try it with the BIOS reset if that does not work, I'll do a format.

  So after that it does not work I thought Okay I'll just clone your laptop work with clonezilla.

  Do I get to the windows flag then instantly the blue screen of death, I can't read it so I is much too fast.

  I thought ok I swap hard drives with the work there. The boots work the clone hard drive just fine without error at all, but the work PC hard drive load the windows flag then blue screen of death.

  I then used a product recovery disc now, it's a drive of windows XP is usless. But I did anyway, and same thing again, it turns the disc fine install XP fine but the flag windows and blue screen of death.

  I finally intertwined a hardrive work 1 different working laptop and a same new blue screen of death in wondows flag.

  It seems to me there must be something on the bios that is
  (A) stop the network port in the bios
  (B) stopping the different hard drives to work in the laptop, even if it's exactly the same laptop.

  They built from the network before for the wondows current installation works, but I have no idea what to do now.

  The error PXE - E61 Media Test failed, check the cable means that the laptop has attempted to boot from LAN, but the configuration of the installation could not proceed.
  Why?
  I m not very well why, but probably there is something wrong with the PXE server settings, etc.

  Are you sure that PXE server has been correctly configured to 100%?
  If this is not the case, check this box.

  > I then used a product recovery disc now, it's a drive of windows XP is usless. But I did anyway, and same thing again, it turns the disc fine install XP fine but the flag windows and blue screen of death.

  Always is Win XP installation could be completed, and this means that the HARD drive should be ok.
  The BSOD could be due to incompatible software or wrong / driver that is part of the recovery disk

  Are you sure that the Win XP Recovery disk you used was the right one?

  How about installation using charge Windows 7 system using the disk of Microsoft?