Fuze does not recognize the .ogg files?

Similar Questions

• Windows Media Player-does not recognize the mpeg4 files

  My media playes does not recognize the mpeg4 files

  I recently had to re - install windows vista, after that everything works well, but when I try to read a MPEG4 file, it gives me an error message that it can't play at this time of the fine.  It plays music, mpg3 files fine... I tried to do a 'quickfix' but it didn't work.

  Hello

  I suggest you to download and install the latest pack of codec for Windows Media Player. Make a search using your favorite for more information search engine.

  See also:
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  
  Note: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Movie Maker does not recognize the MPEG2 files that are created from my new video camera. What can I do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  ======================================
  You run Vista Movie Maker 6? Might be interesting to try
  Convert MPEG files to WMV format before importing.

  Or... it may be interesting to try to install Windows Live Movie Maker...
  which could be compatible with the MPEG2 files.

  Windows Live Movie Maker
  http://explore.live.com/Windows-Live-Movie-Maker
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• 6 Lightroom does not recognize the raw files of Nikon D800

  I have a nikon D800 and Lightroom does not recognize the raw files yet of this camera.  I've updated the LR software to 6.1.1 yet still cannot import files.

  Can you help me

  Thank you

  Ruben

  The D800 has been supported since Lightroom 4.1.

  You use an earlier version of the Nikon software to transfer files from camera to computer? Older versions are known to make Raw files unreadable by Adobe software.

  Try to download a version update of Nikon. Or use a different card for example reader method.

• Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Need of this camera camera raw 8.2 or later. Cannot use this CS5 version. You will need to download the 9.1 free dng converter and convert your images to DNG version CS5 can handle.

  Using Photoshop | Digital Negative (DNG)

• filmmaker does not recognize the MTS files

  I use Widows VIsta.
  I used the windows Director to edit MTS files and was very satisfied of this. Then it stopped working, it does not recognize the files more. As I have understood, by browsing forums, Director of windows LIVE should treat this type of video file. I've updated Windows LIVE essentials and requirements. Still not recognize the MTS file.  Can someone help me? Thank you.

  Your computer may be missing code, download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code. Or it can convert your video to wmv video for a test, I know that windows movie maker supports wmv video well. And this guide will show you how to convert mts video to wmv video.

• Windows does not recognize the .themepack files

  Hello

  Microsoft, I downloaded several .themepack files.  I have Windows 7 Home Premium (32 bit), and it does not recognize the files.  In other words, when I click on the files, they do not open and install.

  " Strangely, when I click the .themepack file properties, it says"Opens with"the" Windows Shell common DLL. "Still more strangely, when I go in the file Extensions Manager in Control Panel, the .themepack extension does not appear.

  I tried to reboot, etc.  Is there a way to fix this?  Otherwise, there is a long workaround solution that I can do to get funds from the .themepack file and install it manually?

  Hi harpsichord,.

  Can you check something:

  1. Press the Windows key + R > type regedit and press enter
  2. Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.themepack
  3. Make sure that there is no key UserChoice (subfolder)

• LR 1.4 does not recognize the raw files of Pana LX-3

  I use LR 1.4 and I try to import my new Panasonic LX-3 raw files. LR does not recognize the file type - told me there is nothing to download. I downloaded DNG converter 5.4 with the hope that that would do the trick. LR does not communicate with the DNG Converter, or, well, I don't know what.

  Can someone tell me how to import LX-3 raw files in LR 1.4? I'd rather not spend the money to upgrade to LR 2.4

  Thank you-

  Use the raw DNG Converter to convert raw files to DNG (keep the original raw files). Then you can import the dng files in LR and they have to be posted.

• Combine files to a single PDF does not recognize the .ai files. If this happens?

  Im working with .ai files and I was wondering if I were to convert before a meet in a single PDF file? When I "Combine files into a single PDF" the finder window does not display the .ai files. I was wondering if that is supposed to happen? It is absolutely necessary first convert them to PDF format?

  You can always store as .ai files and should. But create a PDF file for the feature of the combine. Just to be sure, have you tried to open a .ai file in Acrobat (not combine) and doing a job? I do not suspect. If this isn't the case, then it is clear that you must first create the PDF file for the graphic illustrator. Acrobat cannot convert automatically all types of files as PDF documents, but only selected application files. I'm not sure that the illustrator files are a selected application. You seem to assume that Acrobat should be able to open any file and it is not the case.

• Video importer does not recognize the .wav files

  When I click on get the media, then click on files and folders in PE10, then click a .wav file I want to import, I get the pop-up "Please use importing video. The problem is that the video importer only recognizes the video, mpeg2 files for example. The .wav files that I researched before being forced to use the "importer" video is not in the list. It was so easy to import audio files in earlier versions of Premiere Elements. Why the "importer" video should be used if it does not list the common .wav files? The video importer settings can be adjusted, or this application may be avoided? Gee, I don't know why the things that worked well are made more complicated or is no longer can be made.

  In addition, please download the appropriate help file or manual user to save? I'm willing to pay for this service that we have already taken for granted. Gee, I've been a loyal fan of Premiere Elements. However, things become useless and obscure. I hope moderators help despite this negativity found mine. I'd think again of a program that I made the praise of many people.

  There is no real manual for the program - that's why I wrote my books.

  http://Muvipix.com/pe10.php

  But I'm not sure it would help you in this case.

  Where is the WAV file? It is on the hard drive of your computer?

  You certainly should not use the importer of the video to get the WAV file - assuming that it is not coming from an external device, such as a camcorder or a smartphone or iPad or another similar term.

  But if you have problems, try just open Windows Explorer (or Finder on Mac), locate the file and then just by dragging from Windows Explorer WAV file in your media Panel. It should fall right into.

• my dvd does not recognize the UDF files

  My DVD will not recognize a video which is burned as a UDF. Is there something I can do to make it read these types of files?

  Hi James Major.

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  CD-ROM drive may not be able to read a disc in UDF format in Windows XP

• CS4 does not recognize the MPG files that it captured previously

  Hello

  I have spent some time in the knowledge base and search the Forum, but don't see anything that could help me.

  Windows 7 64-bit on Intel I - 7 920 quad 12 GB of ram CS4 version 4.2.1.  This problem developed there months after installing the suite CS.  Other than what is explained here, there were no changes to the operating system or CS4.

  The problem is that CS4 has ceased to recognize imported MPG files to a HDV camera about a month, using the PrPro capture utility (F5?).  These files have been imported into the project and then treatment Panel (MIC, effects, etc.) on a 64 THAT HDV preset timeline minute.  The entire sequence has been made and read successfully.

  After completing the sequence, I exported it with SOUL to create the elementals of blue ray MPEG to add in yet.  The TEA code finished without obvious mistake.

  Then I created a project again and tried to add the asset - an audio and a video file.  The audio file is added without problem.  Importing video files failed 99% with encorr and Windows hung.  Power off required stop.

  Suspecting a problem with the video file, I open the video file in Windows Media Player and it played ok.  (I note here that this was the first time on this machine that I used WMP, and he did a few configuration steps?)

  I tried yet again without success.  At the next reboot, I open the windows task manager and placed on the second screen so I could watch the CPU to use.  The use of the CPU ran 3 to 8% but when still hung, grew the Task Manager

  I have uninstalled and reinstalled again and SOUL and then upgraded for current levels of the rev.  Same answer as before.

  Based on a post on the site again, I deleted the cache of media key in the registry and rebooted.  Always without success.

  At this point, I decided to see if one of these manipulations had affected the PrPro project.  The project, the sequence and the project Panel all come up as before.  However, all the MPG files were marked OFFLINE.  AVI files and PSD image files were unaffected - they remain linked. These files are all on the HARD disk in the PC itself - no removable disks or network

  I tried to re bind the file by clicking on the main capture file, but each attempt resulted in the error message "unsupported format". or corrupted file.

  Using WMP, I found that the files were not damaged.  I also confirmed that ADobe had recreated the media cache keys and was in fact identified files files.

  I tried to reimport the original capture file and received the same error message.

  I have paid full CS4 and I confirmed that I had options MPEG, when I created a new project.

  For now, I'm more interested fixed the PrPro reason no longers recognizes MPG files he captured, processed and made yesterday. I will fight the problem still on this site.

  Everyone knows this or can make a suggestion how to fix this?

  I do not see why reinstall again and SOUL would have caused this.  I can suspect WMP.  Where can I find which codecs are charged and their priority? What is the codec for prpro would look? MainConcept?

  I intend to use Gspot to see this as code mpg files - need the codec used by adobe.

  Any help you give would be appreciated.

  I can help you with one of those - project files/folders are intact. I am paranoid that I save things like that, even if they should not be affected in some way.

  Like the Adobe Clean Script, run several times is designed to eliminate all things Adobe CS4, I don't know how it might affect the other Adobe programs in a suite. Maybe others can give you a definitive answer.

  I also usually recommend run a cleaner registry, like CCleaner (and to let the default registry backup first), before the reinstall. IIRC, a user had a problem with him, but could have been OE, as most of the users here swear by it, and I've never had a problem (always do the backup of the registry but).

  Good luck and sorry for the bad news. Maybe someone from Adobe can shed more light on why, but I have yet to hear of what happens with CS5, so maybe all that has allowed the reversion has been fixed.

  Furthermore, it seems important to make all updates immediately after reinstalling, before launching the program. It is in any case the recommendation.

  Hunt

• ColdFusion does not recognize the CSV files

  I have a local version of ColdFusion developer 10 on my local machine.

  I use ColdFusion to create a CSV file and save it on the server and create a link by using the following code.

  Browsers open the CSV file in a text file and I use link right click to save target, my Windows Explorer save a html file.

  It works on the other server, using the same code.

  I want to know are there any which configuration to set ColdFusion recognize the format of CSV file when saving the target and he lets browsers know how to use Excel to open CSV files.

  Your information and help is much appreciated,

  Kind regards

  Mouses,

  < Cfset thisPath = ExpandPath("*.*") >

  < cfset f_dir = GetDirectoryFromPath (thisPath) >

  < cfset what = "#dateformat (now (), 'mmddyy') ##timeformat (now (), 'hhmm') # .csv" >

  < cffile action = "WRITE" line = "" f_dir # # how # ""

  output = "MtField1, MyField2" addnewline = "Yes" >

  < cfloop query = "#myQuery #" >

  < cffile action = "APPEND" file = "" f_dir # # how # ""

  output = "Field1 # #, #Field2 # ' addnewline ="Yes">

  < / cfloop >

  < cfset lelien = "MyServer/report /" & what > »»

  < cfoutput > < a href = "#theLink #" > here is the file < /a > < / cfoutput >

  < br >

  There are several different themes play. I have them separate to make the code more manageable and scalable.

  Using your code, I've implemented the following quick test. It uses the embedded, cfartgallery data source, you have also.

  I placed the 3 files in the same directory. But this is usually unnecessary because you can pass the path of the directory as a variable.

  fileWrter.cfm

  Select the city, email

  artists

  Here is the file

  fileDownload.cfm

  You must first create the download file.

  File.CFC

• Lightroom does not recognize the raw file

  LIghtroom import my my new D750 raw NEF photos.  Help!  I had managed to do last week, and I thought that I shot raw and I just went and photographed my first wedding with her and I can't access the files.  Help!  I tried the DNG Converter also, and he says the same thing.

  Thanks, I found how to fix this problem.  I had not downloaded the last Capture NX and after I did I was able to import files.  Phewf!

• CS4 running on the iMac. Nikon D5100.  Does not recognize the .nef files.  Help?

  Currently I have CS4 11.0.2 with Camera Raw installed 5.7.0.213.  I tried to install the raw camera 6.4 version - which is what says their graph, I need for the D5100, but I get an error message: "update could not be applied.  This patch is not applicable to you.  Please check the updates from the Help menu on your product to see a list of the latest available updates. "My help menu shows:"there is no update at this time. "  I found a recommendation on clearing the cache for the Adobe Update Manager, but I searched everywhere and can not find such a file on the computer.  I'm puzzled.  Can anyone help?

  D5100 support has been added in ACR 6.4 you must download the converter DNG 8.6 and create your NEF files in the DNG for CS4 file.

  Camera Raw plugin | Supported devices