my dvd does not recognize the UDF files

Similar Questions

• CD/DVD does not recognize the drive.

  CD/DVD does not recognize the drive.  Error message-"Insert a disk." "" "Insert a disk in the drive (E or F, depending on whether one in use).  I bought a DVD/CD thought exteranl today that might work.  Same error message with the external dvd/cd.  Can hear the disc turning when it is inserted during a short period of time, maybe 20 seconds, then it stops.  Sometimes, the disc is ejected when the error message appears, sometimes not.  Same results even with blank CDs.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Windows Media Player-does not recognize the mpeg4 files

  My media playes does not recognize the mpeg4 files

  I recently had to re - install windows vista, after that everything works well, but when I try to read a MPEG4 file, it gives me an error message that it can't play at this time of the fine.  It plays music, mpg3 files fine... I tried to do a 'quickfix' but it didn't work.

  Hello

  I suggest you to download and install the latest pack of codec for Windows Media Player. Make a search using your favorite for more information search engine.

  See also:
  http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

  
  Note: software use of third parties, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Movie Maker does not recognize the MPEG2 files that are created from my new video camera. What can I do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  I bought a new video camera and Movie Maker on my computer does not recognize the MPEG2 files as video files. He brings only in the sound. Is there something I can do?

  ======================================
  You run Vista Movie Maker 6? Might be interesting to try
  Convert MPEG files to WMV format before importing.

  Or... it may be interesting to try to install Windows Live Movie Maker...
  which could be compatible with the MPEG2 files.

  Windows Live Movie Maker
  http://explore.live.com/Windows-Live-Movie-Maker
  (There are other applications included in the download...
  Uncheck the ones you don't want)

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• 6 Lightroom does not recognize the raw files of Nikon D800

  I have a nikon D800 and Lightroom does not recognize the raw files yet of this camera.  I've updated the LR software to 6.1.1 yet still cannot import files.

  Can you help me

  Thank you

  Ruben

  The D800 has been supported since Lightroom 4.1.

  You use an earlier version of the Nikon software to transfer files from camera to computer? Older versions are known to make Raw files unreadable by Adobe software.

  Try to download a version update of Nikon. Or use a different card for example reader method.

• Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Hello - I have just brought a Panasonic Lumix FZ70 but CS5 does not recognize the raw file (.) RW2). but aid for raw files says that the Lumix FZ70 is supported. Help

  Need of this camera camera raw 8.2 or later. Cannot use this CS5 version. You will need to download the 9.1 free dng converter and convert your images to DNG version CS5 can handle.

  Using Photoshop | Digital Negative (DNG)

• filmmaker does not recognize the MTS files

  I use Widows VIsta.
  I used the windows Director to edit MTS files and was very satisfied of this. Then it stopped working, it does not recognize the files more. As I have understood, by browsing forums, Director of windows LIVE should treat this type of video file. I've updated Windows LIVE essentials and requirements. Still not recognize the MTS file.  Can someone help me? Thank you.

  Your computer may be missing code, download and install K-lite code pack can solve the problem. K-lite code Pack is free and safe, and it includes almost every video code and audio code. Or it can convert your video to wmv video for a test, I know that windows movie maker supports wmv video well. And this guide will show you how to convert mts video to wmv video.

• Windows does not recognize the .themepack files

  Hello

  Microsoft, I downloaded several .themepack files.  I have Windows 7 Home Premium (32 bit), and it does not recognize the files.  In other words, when I click on the files, they do not open and install.

  " Strangely, when I click the .themepack file properties, it says"Opens with"the" Windows Shell common DLL. "Still more strangely, when I go in the file Extensions Manager in Control Panel, the .themepack extension does not appear.

  I tried to reboot, etc.  Is there a way to fix this?  Otherwise, there is a long workaround solution that I can do to get funds from the .themepack file and install it manually?

  Hi harpsichord,.

  Can you check something:

  1. Press the Windows key + R > type regedit and press enter
  2. Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\FileExts\.themepack
  3. Make sure that there is no key UserChoice (subfolder)

• LR 1.4 does not recognize the raw files of Pana LX-3

  I use LR 1.4 and I try to import my new Panasonic LX-3 raw files. LR does not recognize the file type - told me there is nothing to download. I downloaded DNG converter 5.4 with the hope that that would do the trick. LR does not communicate with the DNG Converter, or, well, I don't know what.

  Can someone tell me how to import LX-3 raw files in LR 1.4? I'd rather not spend the money to upgrade to LR 2.4

  Thank you-

  Use the raw DNG Converter to convert raw files to DNG (keep the original raw files). Then you can import the dng files in LR and they have to be posted.

• Combine files to a single PDF does not recognize the .ai files. If this happens?

  Im working with .ai files and I was wondering if I were to convert before a meet in a single PDF file? When I "Combine files into a single PDF" the finder window does not display the .ai files. I was wondering if that is supposed to happen? It is absolutely necessary first convert them to PDF format?

  You can always store as .ai files and should. But create a PDF file for the feature of the combine. Just to be sure, have you tried to open a .ai file in Acrobat (not combine) and doing a job? I do not suspect. If this isn't the case, then it is clear that you must first create the PDF file for the graphic illustrator. Acrobat cannot convert automatically all types of files as PDF documents, but only selected application files. I'm not sure that the illustrator files are a selected application. You seem to assume that Acrobat should be able to open any file and it is not the case.

• DVD does not recognize the drive after installing updates from micorsoft

  After microsoft updates have been installed on our system the DVD - RW drive does not recognize DVD or CD the drive tries to read the disc and then the door opens and DVD/CD is ejected and then it asks to insert the disc.

  Hello

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit for the link.

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Method 2:

  Follow the steps in the link.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/314060

• Video importer does not recognize the .wav files

  When I click on get the media, then click on files and folders in PE10, then click a .wav file I want to import, I get the pop-up "Please use importing video. The problem is that the video importer only recognizes the video, mpeg2 files for example. The .wav files that I researched before being forced to use the "importer" video is not in the list. It was so easy to import audio files in earlier versions of Premiere Elements. Why the "importer" video should be used if it does not list the common .wav files? The video importer settings can be adjusted, or this application may be avoided? Gee, I don't know why the things that worked well are made more complicated or is no longer can be made.

  In addition, please download the appropriate help file or manual user to save? I'm willing to pay for this service that we have already taken for granted. Gee, I've been a loyal fan of Premiere Elements. However, things become useless and obscure. I hope moderators help despite this negativity found mine. I'd think again of a program that I made the praise of many people.

  There is no real manual for the program - that's why I wrote my books.

  http://Muvipix.com/pe10.php

  But I'm not sure it would help you in this case.

  Where is the WAV file? It is on the hard drive of your computer?

  You certainly should not use the importer of the video to get the WAV file - assuming that it is not coming from an external device, such as a camcorder or a smartphone or iPad or another similar term.

  But if you have problems, try just open Windows Explorer (or Finder on Mac), locate the file and then just by dragging from Windows Explorer WAV file in your media Panel. It should fall right into.

• creating Windows dvd does not recognize the music in my itunes library

  I'm trying to finialize the title page for a slide show I did in windows movie maker, which includes several songs from my itunes library, but it will not be recognized all my itunes files. It allows me to choose the sample songs in the music folder however. any suggestions on how to add my music?

  Windows, be it the media player, movie maker and DVD maker, do not accept MP4 file formats.
  Windows do not accept Apple file formats, be it video or audio files.

  Here is the list of formats of audio files supported by Windows:

  • Audio files: ".aif", ".aifc", ".aiff", ".asf", ".au", ".mp2", ".mp3", ".mpa", ".snd", ".wav" and ".wma".

  Your itunes MP3 Google for an audio converter and change file formats. Then re - import to Movie Maker.

  PS You can bypass Windows Movie Maker... as the title of your message create dvd windows says.
  Use Windows DVD Maker and add your items directly in the creation of DVD.
  You will still need to convert the audio files to itunes.

  Windows DVD Maker user guide

  http://www.windowsvistauserguide.com/windows_dvd_maker.htm

• CS4 does not recognize the MPG files that it captured previously

  Hello

  I have spent some time in the knowledge base and search the Forum, but don't see anything that could help me.

  Windows 7 64-bit on Intel I - 7 920 quad 12 GB of ram CS4 version 4.2.1.  This problem developed there months after installing the suite CS.  Other than what is explained here, there were no changes to the operating system or CS4.

  The problem is that CS4 has ceased to recognize imported MPG files to a HDV camera about a month, using the PrPro capture utility (F5?).  These files have been imported into the project and then treatment Panel (MIC, effects, etc.) on a 64 THAT HDV preset timeline minute.  The entire sequence has been made and read successfully.

  After completing the sequence, I exported it with SOUL to create the elementals of blue ray MPEG to add in yet.  The TEA code finished without obvious mistake.

  Then I created a project again and tried to add the asset - an audio and a video file.  The audio file is added without problem.  Importing video files failed 99% with encorr and Windows hung.  Power off required stop.

  Suspecting a problem with the video file, I open the video file in Windows Media Player and it played ok.  (I note here that this was the first time on this machine that I used WMP, and he did a few configuration steps?)

  I tried yet again without success.  At the next reboot, I open the windows task manager and placed on the second screen so I could watch the CPU to use.  The use of the CPU ran 3 to 8% but when still hung, grew the Task Manager

  I have uninstalled and reinstalled again and SOUL and then upgraded for current levels of the rev.  Same answer as before.

  Based on a post on the site again, I deleted the cache of media key in the registry and rebooted.  Always without success.

  At this point, I decided to see if one of these manipulations had affected the PrPro project.  The project, the sequence and the project Panel all come up as before.  However, all the MPG files were marked OFFLINE.  AVI files and PSD image files were unaffected - they remain linked. These files are all on the HARD disk in the PC itself - no removable disks or network

  I tried to re bind the file by clicking on the main capture file, but each attempt resulted in the error message "unsupported format". or corrupted file.

  Using WMP, I found that the files were not damaged.  I also confirmed that ADobe had recreated the media cache keys and was in fact identified files files.

  I tried to reimport the original capture file and received the same error message.

  I have paid full CS4 and I confirmed that I had options MPEG, when I created a new project.

  For now, I'm more interested fixed the PrPro reason no longers recognizes MPG files he captured, processed and made yesterday. I will fight the problem still on this site.

  Everyone knows this or can make a suggestion how to fix this?

  I do not see why reinstall again and SOUL would have caused this.  I can suspect WMP.  Where can I find which codecs are charged and their priority? What is the codec for prpro would look? MainConcept?

  I intend to use Gspot to see this as code mpg files - need the codec used by adobe.

  Any help you give would be appreciated.

  I can help you with one of those - project files/folders are intact. I am paranoid that I save things like that, even if they should not be affected in some way.

  Like the Adobe Clean Script, run several times is designed to eliminate all things Adobe CS4, I don't know how it might affect the other Adobe programs in a suite. Maybe others can give you a definitive answer.

  I also usually recommend run a cleaner registry, like CCleaner (and to let the default registry backup first), before the reinstall. IIRC, a user had a problem with him, but could have been OE, as most of the users here swear by it, and I've never had a problem (always do the backup of the registry but).

  Good luck and sorry for the bad news. Maybe someone from Adobe can shed more light on why, but I have yet to hear of what happens with CS5, so maybe all that has allowed the reversion has been fixed.

  Furthermore, it seems important to make all updates immediately after reinstalling, before launching the program. It is in any case the recommendation.

  Hunt

• CD/DVD does not recognize the disks and will not be closed

  original title: problem with tray D

  I use a unit of reconditiioned Dell 8300 with XP Professional system.  The unit was slow and gel a bit so, in one of the slow itls break cycles I insereted in the toolbar an old XP disc I had to front to see if that would help and after I closed the tray I noise loud crash and the tray came out showing broked pieces of the disc. I flipped the unit and hit the bottom and more pieces of the disc came out.  Now the set is not closed.  If I insert a workable disc and maintain status bar tap it will not do anything and a window tells me to insert a disc. Shou ld I try to disassemble the unti to see if there's still some piece or pieces preventing reset the tray? Or is it to say that I'm going to my repairman authorized Microsoft for the rerpair?  E-mail address is removed from the privacy *.

  I'm really sorry to laugh, but this is a funniest post I've ever seen. Apparently you've damaged the device rom (cd/dvd drive) replace it with a new one. They measure less $ $30 .00usd. Furthermore, placing the old drive in the drive xp will not improve the performance of the computer. Looks like you have some malware. I recommend that you post in the section virus/malware of the forum on the link below for a complete analysis. The forum is free. While I could recommend some scanners, I think you need a full inspection.

  Free Forum: repair-Bots Online