FXML: < fx: include / > with the attribute of resources. How does it work?

Similar Questions

• My computer starts slowly, infected with the virus. Microsoft Security does not work

  Original title: keep the slow start
  How do I remove trozens in the computor & to I have no few of them didn't have on this computor Microsoft Security Essentrials keep turning off as his red everrytime I restart the computor

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Using fault-political with the Ombudsman and db adapter does not work

  Help, please! I am stuck on this during 2 days...

  Hi friends.

  In my project I am trying to give a treatment with the exception of a db adapter executes a pl/sql procedure.

  I'm forcing a raise_application_error in the procedure to handle the exception, and I would fault the police to treat it as "action man".

  The db adapter is wired to a mediator:

  JMS-service-> Ombudsman-> db Jca adapter

  When I'm with the exception of the log says:

  9d8bff56a1 due to: LINK. JCA-12563 []

  Exception occurred when the link was invoked.

  Exception occurred during invocation of the JCA binding: "JCA binding run operations reference 'PersistirODS' has no reason to: stored procedure call error.»

  Error trying to prepare and execute the FORNECEDOR. UPSERTFORNECEDOR API.

  There is an error occurred so that the preparation and execution of the FORNECEDOR. UPSERTFORNECEDOR API. Cause: java.sql.SQLException: ORA-20101: Deu Merda

  ORA-06512: at the 'FORNECEDOR. UPSERTFORNECEDOR', line 405

  ORA-06512: at line 1

  Make sure that the API is defined in the database and that the settings match the signature of the API.  This exception is considered non reproducible, probably due to an error of modeling.  To be classified as reproducible to the contrary to add property nonRetriableErrorCodes with the value "-20101" to your deployment descriptor (i.e. weblogic - RA.Xml).  Auto retry a reproducible fault set composite.xml for this invoke these properties: jca.retry.interval, jca.retry.count and jca.retry.backoff.  All properties are integers.

  ".

  The called JCA adapter threw an exception of resource.

  Please review the error message above carefully to determine a resolution.

  ]]

  and then it looks like it tries to run police of fault, but it says:

  [2014 04-10 T 20: 01:39.667 - 03:00] [AdminServer] [WARNING] [] [oracle.integration.platform.faulthandling] [tid: Workmanager:, Version: 0, scheduled = false, started = false, queue time: 0 ms\n] [userId: weblogic] [ecid: 11d1def534ea1be0:-1fa77a00:145468d59e7: - 8000 - 000000000002801 a, 0] [APP: soa-infra] [RejectedMsgHandling] Impossible to enforce policies on the message rejected with id - 60046 []

  oracle.fabric.common.FabricException: cannot resolve the link to a fault policy [blamed the activity details:]

  Name of activity = null

  The activity Id = null

  Activity lineNumber = null

  Reference name = null

  WsdlLocation = null

  ActivityType = null

  ]

  Here are my files fault-policies and fault-links:

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < faultPolicyBindings xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  " xsi: schemaLocation =" " http://schemas.Oracle.com/BPEL/faultpolicy .. / xsd/FaultBindings.xsd '

                       xmlns=" http://schemas.Oracle.com/BPEL/faultpolicy "> "

  < faultPolicy composite = "political malpractice" / >

  < / faultPolicyBindings >

  <? XML version = "1.0" encoding = "UTF-8"? >

  " < faultPolicies xmlns: xsi =" http://www.w3.org/2001/XMLSchema-instance "

  " xsi: schemaLocation =" " http://schemas.Oracle.com/BPEL/faultpolicy .. / xsd/FaultPolicies.xsd '

                 xmlns=" http://schemas.Oracle.com/BPEL/faultpolicy "> "

  < faultPolicy id = "political malpractice" >

  < condition >

  " < faultName = xmlns:medns ' http://schemas.Oracle.com/mediator/faults "" "

  name = "medns:mediatorFault" >

  < condition >

  < Ref action = "by default-human-intervention" / >

  < / condition >

  < / faultName >

  " < faultName = xmlns:rjm ' http://schemas.Oracle.com/SCA/rejectedmessages "name ="rjm:PersistirODS"> "

  < condition >

  < Ref action = "by default-human-intervention" / >

  < / condition >

  < / faultName >

  < faultName >

  < condition >

  < Ref action = "by default-human-intervention" / >

  < / condition >

  < / faultName >

  < / conditions >

  < action >

  < Code action = "by default-human-intervention" >

  < humanIntervention / >

  < / action >

  < / actions >

  < / faultPolicy >

  < / faultPolicies >

  Once again

  Help, please! I am stuck on this during 2 days...

  Guys... My fault...

  Just changed from parallel sequencial and it worked...

• The new update with the Patch for Camera Raw does not work. Code U44M1P34

  Hello

  I have a problem with the new CC update - including the patch for Camera Raw 8.7.1

  Error code: U44M1P34

  Photoshop CC (2014)

  After Effects CC (2014)

  Brisge CC

  The log file shows 1 fatal error:

  FATAL: Payload ' Photoshop Camera Raw 8_8.7_AdobeCameraRaw8.0All 8.0.0.22 with a number that follows.

  I tried to uninstall reinstall. Did not work at all, because the same problem appears.

  I have not installed in other folders. All other updates worked - but not this update. The problem seems to bee only caused by the Camera Raw update.

  Are there other people with the same problem? Any ideas?

  Thanks in advance and greetings,

  Joerg

  Hi Jeff,

  It seems I found a dirty solution, but work for my problem on this site: Getting fatal exit Code 34 when installing an application

  To change these 3 names of folders and reinstall my programs worked fine without error:

  Adobe PCD-> Adobe PCDold

  backup-> backupold

  Caps-> capsold

  Now, the programs are on the actual status with all the updates that are included and everythings looks fine.

• USB formatted on the windows computer and then loaded with the IOS El Capitan files does not work on the Windows computer

  I tried to format a usb drive on my iMac home for use on a Windows computer. I tried to format it on the iMac with El Capitan and format on the Windows computer, but with the same question.  The files are corrupted and do not function correctly on the Windows computer at work.  The files are a combination of audio files and writing.  Is there a way to overcome this problem.  When I used earlier versions of IOS are not usability issues.

  iOS is for iPhones and iPads, but you also state El Capitan, so I guess that's what you're talking about.

  There are a lot of audio formats, many writing programs, so it is quite difficult to determine if this is a problem of format of file or a problem of disc format.

  Even if it's an mp3 player, wmv or any other file extension, there are more for the 'format' of an audio file of the extension.

  These designations are just wrappers that contain audio information. Audio information can be encoded in a variety of different formats and still be an mp3 or wmv. An mp3 player that plays on Windows cannot play on a Mac due to using a codec that is not installed on the Mac. Apple recently purged the operating system of older, obsolete codecs. As a general rule, VideoLan VLC can play most audio and video files on Mac and Windows.

  Were what type of writing files? Word, Pages, TextEdit,...?

• I wish I had a client on my PC to communicate with the Lync server, but it does not work.

  Evaluation of the VHD Lync 2010 program

  I'm quite new to Lync and I'm trying to understand how it all works. I downloaded the virtual computer files and got successfully throughout the environment, but now, I would like to have a client on my PC to communicate with the Lync server but I'm not having any luck.

  Here are the servers that I have:

  DC

  Exum

  Lync-Qms

  Lync-Se

  SPS2010

  These are all in an internal network and I gave the Lync-SE server outside access, assuming that it's the server that my client needs to communicate with because he runs the Lync server. Initially, I was getting a certificate error. I exported the certificate of the server DC, installed on my client and the client toward the DC server who gave me the certificate number, but now I get an error that the server is temporarily unavailable. I'm far from base here?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/OCs

  I hope this helps.

• Problem with the touchpad: Tap to click does not work if I use a standard account

  Hi all

  I have a problem with my laptop that I don't understand and I need help from the community.
  As the title says... If I connect to my laptop using a standard account the touchpad does not work if I try to tap to click. Left and right buttons work, move the slider works, works of scrolling, but endearing tape... not even a single tap. If I log in with my account as an administrator, the touchpad works like a charm, no problems. Tap to click and everything you want. If I disconnect the admin account and sign in as a standard user, the problems are back again. I can move the cursor, click on the two buttons (left, right), but I can't type to click...

  I tried to reinstall the driver for the touchpad (which is MOMENTUM...) but it did not. I tried to see if there is any option that can prevent this tapping or something... but in the control panel > Touchpad > Tap is turned on. A strange thing in the control panel of the Touchpad is that [when loggend as a standard user] I get an error "unhandled exception has occurred in your application. If you click on continue the application will ignore this error and attempt to continue. If you click on exit the application will close immediately. "and a new line saying"index was outside the bounds of the array. If I click on continue the error disappears, but reappears if stationary "double-tap" enable/disable option. If I click on leave the Touchpad Control Panel closes...

  All this trouble occurs only when I use the standard account. With the administrator account, I don't get any errors so I soar options, disable them, activate them and most importantly, the tap to click works.

  What is the problem with the standard account?

  I have Windows 7 Home Premium 64-bit Service Pack 1.

  Can someone help me please?

  Hi Johnxf,

  ·         Did you do changes on the computer before the show?

  As he works in an administrator account, then probably your standard user account have been damaged and would need a fix.

  Follow the article provided below to fix the corrupted user profile:

   

  Difficulty of a corrupted user profile

  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Let us know if that helps.

• I have a problem with the cloud creative apps install does not work

  Hi, there is a problem with the Office of cloud when I tried to update or the Office checks the update there is an error message that I need to contact support.

  I am tired of the destop to uninstall and reinstall it but the problem still there.

  Could you please help me?

  what I have to do. I validate responses to your help page but nobody not corresponding to my problem...

  Thank you for your kind reply

  Soniablanco please try to remove the following directories from users / Library/Application Support/Adobe

  • AAMUpdater
  • OOBE

  Please make sure that you are in the library folder of the user rather than the main folder of the library.  Remove these files in/Library/Application Support / Adobe / will require a reinstallation of applications to recover the files.

  AAMUpdater and OOBE records are therefore two specific users may be why you see the behavior under only the migrated user account.

• Reformat and re-install XP SP2 but now struggling with the updates. Windows Update does not work. Loading SP3 will fix this?

  After repeated BSOD (FLTMGR_FILE_System 0x000000F5, 0 x 00000066, etc.) errors usually 7 to 8 minutes after the start, I reformatted the drive C: and re-installed XP SP2.  But since then, I had a very hard time updated.  I even got again the WORC and had to go back to a previous restore point after installing IE8.

  Windows Update does not work.

  [Error number: 0x8024400A] The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. For self-help options: Frequently asked Questions Find Solutions Windows Update Newsgroup To support options: Microsoft online assisted support (no cost for Windows Update issues

  Hello.

  Try the suggestions on this site:

  http://support.Microsoft.com/kb/836941

• Application of windows 8... can I use to open the ram files and how does it work?

  application of windows 8... can I use to open the ram files and how it works

  I think you are talking about the files with a. Extension of RAM. If that is the case, have a read of the information at the link following, be careful, do not click on the buttons of the big 'Download Now' here, they are simply advertisements:

  http://www.FileInfo.com/extension/RAM

  Real Player is a program that should help you to open these files. You can search and download the Windows Real Player 8 compatible version on their site.

  I hope this helps!

• Calls for Freeway with the required forced authorization code does not work.

  Hi all!

  I have implemented a collaborative edge Expressway, seems to work fine, except for calls limited requiring a forced authorization code.

  If I connect to the local network (with Jabber, of course) I have no problem for any call restricted or unrestricted, but if I connect outside my firewall (using my expressway) I can't make tight calls, only unrestricted calls. In the jabber never complete call Office and in the jabber for android or iPhone the call drop instantly.

  TTE termination reason code is "(3) no route to the destination.» The user to call can not be reached, because the network serving the called user is unreachable.

  any idea?

  CUCM 10.5

  vcsce & vcs - c 8.2.1

  Jabber version (one more for Iphone, android, mac and windows)

  Hello

  I am facing the same issue.

  How you solved the problem?

  Kind regards

• Comfort provided with dv6-1299ea Artist Edition - How does it work wireless mouse?

  Hi, I just got a new laptop of artists Edition that came with a "comfort wireless mouse. The guide quick installation for the mouse seems to show some kind of USB dongle required, but nothing like this anywhere in the package. Does anyone know how to get me a?

  Thank you

  I was puzzled by that initially as well.  So I decided to read the instructions and found that there is a small USB transmitter/receiver inside the mouse battery compartment.  What explains that the cover is of irregular shape for a single battery.

• Cannot communicate with the device or resource - primary DNS server

  I have problems with my laptop using windows 7.
  I was able to connect to the internet until the 19/08/12 to the evening.   After having been online earlier that evening and closed, I rebooted the computer and found my computer connected to the wireless network but had access to Internet 'No '.
  Network Diagnostics has revealed: "Windows cannot communicate with the device or resource (primary DNS server). I had a full signal strength and I introduced myself to be connected to the network, but there is "no internet access.
  I have several computers and have no difficulty in connection with any other device (computer, video streaming, phone), to the internet through the network, home.
  I tried and am not able to connect wireless or ethernet over any network cable (tried 3 others) but can connect to these networks using other computers, telephone, etc.
  I have not recently installed/uninstalled anything.  System Restore says the last restore as on 15/08/12 point.
  Thank you.

  Hey, I uninstalled McAfee and that solved the problem.  Thanks a lot for the suggestion and encouragement.  I'm back online.

  Thank you again... Success!

• Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server)

  Many problems with Windows, Windows cannot communicate with the device or resource (primary DNS server), Internet Explorer browser does not.

  Hi Rachel,

  I understand that when you try to connect to the Internet, you get error "Windows cannot communicate with the device or resource (primary DNS server)", what other issues you are faced with Windows?

  • Using a cable or a wireless Internet connection?

  DNS (Domain Name System) translates the URL in IP (Internet Protocol) addresses (and vice versa). For example, if you type http://www.microsoft.com into the address bar in your web browser, your computer sends a request to a DNS server. The DNS server translates the URL to an IP address so that your computer can find the Microsoft web server.

  I suggest you to follow the methods in this article and check if it helps.
  http://support.Microsoft.com/kb/2779064/en-us

  Let us know if it helps.  If the problem persists, please answer, we will be happy to help you.

• The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  I use sync DIP at the end of migration of data from OID for target OUD. Everything seems great so far, I have found that pwdhistory being migrated is not being validated by OUD password policy

  I do import ldif for OUD and find this pwdhistory field is populated with the same OID value. When I reset password in OUD-DOHAD with the word in the history of password,.

  Expected Behavior: Error Message from the OUD "" LDAP: error code 20 - already the value of specified password exists in the user input " "

  Course Behavior: OUD is what allows to reset the password in the password history

  Also found that when I try again with the same password, then it throws the error 20 code. OUD replaces the old values in pwdhistory after the password resets and written new values with stamp of password.

  It is a Blocker for us for migration in the history of password, I would like to join the forum and check if someone had the same problem and how they managed it?

  Thank you

  Satya

  Support of Oracle confirmed that DIO history for the OUD password migration is not supported. The OID and OUD records and validates the pwdhistory differently