G7-1310us Pavilion: touchpad gets frozen for 3 seconds after the use of the keyboard
I use my laptop in my class of coding and programming. The problem is related to the touch pad. It works but for some reason when I use the keyboard (just by pressing a key will do) it locks the key for three seconds.
can you help me with?
Hello
Normally, you just have to disable SmartSense or PalmCheck Control Panel of Synaptics - but from what I've seen, it seems no longer works for Windows 10 versions of this driver.
You may be able to work around this problem as follows.
First, download the Synaptics driver on the link below and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp59001-59500/sp59155.exe
Disable your wireless card (should be f12 ).
Open Control Panel, open programs and features, right click on the Synaptics driver and select uninstall.
When finished, restart the laptop.
When windows rebooted, open your download folder and re-run the installer of Synaptics - when it is finished, restart the laptop.
Open the Synaptics settings panel, disable SmartSense or PalmCheck , then check if the touchpad works now with a key on the keyboard is pressed.
If so, turn on your wireless card and use the utility on the following link to prevent Windows 10 to update automatically the Synaptics driver.
https://support.Microsoft.com/en-GB/KB/3073930
Kind regards
DP - K
Tags: Notebooks
Similar Questions
-
Folio 1020 G1 keyboard works not for 30 seconds after the computer wakes from sleep
I have several books of Folio 1020 G1 where the integrated keyboard does not work for about 30-60 seconds after the resumption of the operation of the standby mode. Everyone met this problem or a solution?
The touch pad, touch screen and a usb keyboard immediately all work.
They work on the load of the plant, but these machines were photographed with Windows Enterprise 8.1 x 64 using Configuration Manager 2012. The pack of drivers for this model of http://ftp.hp.com/pub/caps-softpaq/cmit/HP_Driverpack_Matrix_x64.html, http://ftp.hp.com/pub/softpaq/sp70001-70500/sp70362.exe is applied successfully during the imaging task sequence. I also miss the key features of the FN for brightness and microphone mute, but sp70321.exe (http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=7343091 & swItemId = ob_144333_1 & swEnvOid = 415... does not solve this problem.
This question has been somehow created by installing a software Synaptics 17.x version followed by the installtion of the 18.x software required above it. I don't know if this software was automatically installed from Windows builtin drivers or other drivers imported into Configuration Manager have been incorrectly applied, but running "rundll32.exe"% ProgramFiles%\Synaptics\SynTP\SynISDLL.dll",SilentUninstall_CallerWillReboot" in the sequence of tasks before apply the package stops sp71067.exe the problem didn't happen. "
-
Adobe Reader 11.0.09 stop responding for 30 seconds after the start
When starting 11 AR (whether via its icon or a .pdf document), AR starts normally, but after a few seconds the interface freezes and unresponsive for about 30 seconds. Connection at startup with Process Monitor gives the result below (actually two instances, only is indicated). When the second instance times out (I guess this is what happens), AR11 starts responding again.
The problem disappears if the Weblink.api plugin is deleted, with the side unhappy effect as the tool on the right pane also disapperas (replaced by a spinning icon but AR11 otherwise responsive).
AR11 installed on the server doesn't have any Internet access either. My guess is that AR11 is looking for the host above for some reason any and need some time before it becomes available for use. This is obviously a very poor design and we want to solve somehow... Ideas anyone?
/ Patrik
Workaround. By activating the locking function, we prevented Adobe for trying to muck about online. In fact NSA provides recommendations on how to lock Adobe Reader, google 'Recommendations NSA to configure Adobe Reader XI in a Windows environment'. We only use:
HKLM\Software\Policies\Adobe\
- \FeatureLockDown\cCloud bDisableADCFileStore REG_DWORD set to 1
-
Hello. Where can I get documentation for HP Capture and the road? As a user/administrator's guide? I recently installed a trial version, but he did not come all documentation.
little late? ;-)
Seems many is research. Look at
-
Satellite A500 - it gets stuck one second after the BIOS update
I knew I shouldn't update BIOS unless I have problems. A message came Toshiba Bulletin Board and I was stupid enough to trust him and I have updated my BIOS. The update has been successful, my computer seems to work very well.
Except, now when I try to watch a movie, I downloaded every 10 seconds or if it gets stuck for a second and then plays normally and it happens when I play music on itunes. Because I didn't have this problem before, I'm not accusing the update. Is there a way I can go back or how can I return to normal?
Oh God, what have I done? :(
You can try to update a sound/display drivers on the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp] Bios update should not cause a problem like yours, but who knows... (You can also try to load the default settings in the Bios)
Updated version of itunes and try how movies on VLC and Kmplayer -
Can I delete my recovery for WIN7 partition after the upgrade
Can I delete my recovery for WIN7 partition after the upgrade.
What can I INSTALL CLEAN so I want
What should I do when I need to reinstall Windows 10?
The upgrade is a download of ISO or just installed on WIN7?
The application upgrade says to reserve my copy so I did but I never got confirmation of this email?
July 29, 2015.
How to get the Windows 10 free upgrade
J W Stuart: http://www.pagestart.com
-
Single-pass does not work for Web sites after the last update of firefox
Single-pass does not work for Web sites after the last update of firefox. This works in IE and Chrome and it works under windows (when starting the computer), but not with any website in Firefox.
Firefox 30 spent some less commonly used "Always turned on" plugins "asking to activate. To check and change this to SimplePass, you can use the page modules. Either:
- CTRL + SHIFT + a
- "3-bar" menu button (or tools) > Add-ons
In the left column, click on Plugins. Then on the right, check the control on the right side of the SimplePass.
You may need to exit Firefox and start it again before it takes effect.
A little luck?
-
# zoom the browser constantly. (if u don't have to zoom-in for each unique site and links, and then zoom-in for them again after the closing by opening the browser)
I haven't seen good eye.
Install the extension to Default FullZoom Level and set a default zoom level:
https://addons.Mozilla.org/en-us/Firefox/addon/6965 -
Since the upgrade to 8.0, when navigation between screens, my computer screen becomes black for 1 second before the screen is redrawn. This happens regularly and is a major nuisance. It simulates a power failure. It does not happen with IE.
Here I answer to my problem: I upgraded my graphics card and the problem seems to have disappeared.
-
My iPad mini asks for a password after the upgrade to iOS 9.3, but no password was put on the device. What is the solution?
I guess it is asking you to CREATE an access code. You can disable it later.
-
The speed of the processor 1 group 0 is restricted by the system firmware. The processor has been in this state of reduced performance for 4 seconds since the last report.
Event ID: 37
Source: Kernel-processor-Power
Task category: 7-What it means and how to fix this?
: S
Make sure that the system has sufficient cooling, and that you have upgraded the BIOS most recent.
-
Original title: "sleep" mode
Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own
Hello
See if this information helps you, Vista and 7 work the same:
"How to restore the default power Plan settings in Vista"
http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html
"How to solve a problem of Mode Vista or Windows 7 sleep"
http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html
See you soon.
-
Hello
I live in Iran.
Here access to the original windows is not easy.
I have ultimate edition (eternity) win 7.
He let me to use during 30 days three times use "slmgr-rearm" to extend the trial period.
Hereby, I can use and update.
I have two questions.
1. is legal to use "slmgr-rearm" extend with period?
2-may I have reinstall win 7 and use it for 30 days after the expiration date (29 days)?with speciall thank you
original title: Reinstall windows 7 ultimate
According to the software Microsoft Windows 7 license, you must activate Windows 7 within 30 days of installation. You are not allowed to circumvent or bypass the product activation. After 30 days, you must enter a genuine Windows 7 product key for the edition you have installed, or remove Windows 7 by reformatting the hard drive, on which it is installed.
In addition, you must respect Export Basics.
-
I have a Sony KDF - E55A20 LCD TV. He will play for 30 seconds then the TV goes black, and the projection lamp turns off, sound and image of loser. In addition to 30 seconds the TV will go back on, picture and sound, with the projection light will come back on. This process goes on and on, for 30 seconds, 30 seconds, and so on and so forth. Is my problem the lamp of projection or something making the projection lamp go out? The lamp does blink.
I also have a Sony KF-50WE610. After that warm-up screen will be partially or entirely green, fuzzy television images, back to normal and then on and off the green. I replaced the projection lamp but the problem persists.
Any ideas?
Sounst like you have a lamp or a bad ballast Board... maybe the fuse thermal problem on the we610 a20, I had a... your optical block going bad... not much to do with a single, it is costly repairs for that old of a TV.
-
Where can I get help for a problem with the language?
I have 3 languages installed on this computer. It worked fine last night, but today it will not switch between them. Where can I get support for this problem? Thank you!
Restore point:
http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
Do Safe Mode system restore, if it is impossible to do in Normal Mode.
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
See you soon.
Mick Murphy - Microsoft partner
Maybe you are looking for
-
G6 D5F84PA #ABG Pavilion: pavilion g6 drivers
I had the computer laptop for a few years but never used.actually not even to take out of its box that I just made a few days ago, and of course that I was confronted with tons of updats let him run and download all updats so big problems.1 her comut
-
HelloHow are you?? I have toshiba tecra M2 and it's a real neat machine, I was wondering what can I upgrade my 64 MB graphics card 128? and also the speed of treatment? Thank youMaïwenn
-
GarageBand - easily sharing songs
So I created a song on garageband. I want to share this song with friends and family. I sent the song to a playlist of iTunes, but I have no idea how to send this song to my friends so that they can access it on their iPhone. I thought I could just
-
Error "this application has failed to start because iertutil.dll was not found" on startup
original title: iertutil.dll problem I have exactly the same problem as helpneeded1000. The message box that says: "this application has failed to start because iertutil.dll was not found. Re-install the program may fix this problem. "Get right after
-
Windows7 upgrade that went wrong
Hello My son got a machine running vista and it has upgraded to Windows7 with a free upgrade, which he received at the University that he attended. It was received at the campus bookstore, so it should have been a legal copy. We now have this machi