Gamepad Xbox 360 as seen in "Device Manager", but not recognized as "Game controller" and will not be installed all the drivers
My problem is very similar to the one raised here:
UPDATE: I finally got to work. Everything is beautifully detailed in this video from Youtube:
Tags: Windows
Similar Questions
-
I connected my xbox 360 controller to my pc with the usb cable and downloaded the driver (I run XP Pro 32). His does not work in-game. I can see the controller in Device Manager (under the new group called xbox 360 devices) but it does not appear under "game controllers" in the control panel. Im trying to use it with the Flight Simulator x.
Hi Absolutemar,
Welcome to the Microsoft Answers Community Forum site!
In order to resolve your problem, please visit the below mentioned link.
http://www.xbox360forum.com/Forum/
Please perform the following steps also suggests:
First we suggest you to download the Xbox 360 controller from the below mentioned link:
http://www.Microsoft.com/hardware/gaming/ProductDetails.aspx
Then install the Xbox 360 on your computer:
Note You must install the software on your computer before you connect the gamepad Xbox 360 for Windows on your computer.
To install the software, follow these steps:
1. open the software that you downloaded from the Microsoft Windows gaming website or insert the Xbox 360 Controller for Windows installation disc in your computer's DVD or CD drive.
If the screen does not appear automatically, click Start, click run, type the following command in the Open box and then click OK:
DriveLetter : Setup
For example, if the CD-ROM or DVD drive is drive E, type type, and then click OK.
2. on the configuration screen, click install.
3. follow the instructions in the Installation Wizard to complete the installation.
Note You may be prompted to restart the computer.
For more information about the Xbox 360 installation on your computer, visit the below mentioned link:
http://support.Microsoft.com/kb/906347
In this case, you need more information, you can visit the link below.
http://www.Microsoft.com/games/en-us/community/pages/forums.aspx
I hope this helps!
Thank you best regards &,.
Calogero - Microsoft technical support.
Visit our Microsoft answers feedback Forum
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/threads/ and tell us what you think -
When I plug in an external hard drive usb, it is recognized in Device Manager, but not in Solution Explorer. I use windows 7 on a laptop Pavilion dv7-6b77dx.
Thank you. I followed your instructions and it worked. I am amazed by these forums. No matter what a person has problems, there is someone out there who has the knowledge and the willingness to share with the less informed. Thanks again for you information.
lacroos
-
I formatted my computer and install windows xp and I installed all the drivers, including the audio driver and it asked me to restart my pc after installing the audio driver. Later, when I tried to play the song on pc then Windows media player displays an error not saying no audio device installed... I almost tried everything but nothing is done... there no sound option in Device Manager and I'm really scared... what to do now? Help, please
Seriously? Not really... it's just a matter of eliminating the current
sound card and install a new one.If you're not a repair person computer DIY that it would be
be the best if you take it to a professional.They might find that you don't need even a new sound card.
And, the following links will give you an idea what it is:
Windows XP - How to install a sound card
http://www.LIUtilities.com/how-to/install-a-sound-card/Windows Vista - install or remove a sound card
http://Windows.Microsoft.com/en-us/Windows-Vista/install-or-remove-a-sound-cardWindows 7 - install or remove a sound card
http://Windows.Microsoft.com/en-us/Windows7/install-or-remove-a-sound-card -
Installed all the drivers from HP for HP17-3077NR site, still a PCI device is uninstalled
Hi all
I had recently no other choice, then to reinstall Windows 7 64 bit on my HP Envy 17-3077NR. Everything works well so far, but I noticed that in Device Manager, a PCI device seems not to be installed. I tried an extensive search on the internet, has tried to update the driver on Windows. Uninstalled the resettled drivers and the device new & again. I installed all the drivers from the hp website for my 17-3077nr, but still a PCI device is uninstalled. Nothing seems to work. This is the first time that I am reaching out in a forum, because I'm desperate.
Anyone have an idea I was not yet executed?
Best regards
Peg Leg
Hello
I think it's the card reader. Please try:
http://ftp.HP.com/pub/SoftPaq/sp52501-53000/sp52798.exe
or newer:
http://ftp.HP.com/pub/SoftPaq/sp56501-57000/sp56908.exe
Kind regards.
-
External hard drive in the Device Manager but not in disk management
So I have this external hard drive Western Digital 1 TB. I've had for over a year now and it was working fine. I would like to trade my XBox 360 and the computerregularly. Then one day I brought home, plugged into the computer and nothing. My friend and I couldn't understand anything. We have gone as far as removing the hard drive and put it directly into the computer. I have reviewed, that he has lost.
Then yesterday, on a whim, I tried to connect it again to the USB port. It is presented in the Device Manager but says that its drivers have not been installed. Then, I changed the USB ports on the back of the computer and as if by magic, that this is once again. I had full access. Stupid (and you can see where this is going) did not immediately transfer anything off the hard drive. I'm looking for an image and listen to a song off of said hard drive when the drive went suddenly not recognized.
I can see now the reader in the Manager of devices under disk drives, and USB devices. However it does not appear in the disk management window. And Yes, I checked as well the Productdocumentation upper and lower, that it is not listed. Go to the area where you assign drive letters not shown not be. Normally this is E:.
I also tried to remove the UpperFilters registry in regedit. It was not to remove LowerFilters. Obviously, that didn't work or the other.
I tried several cords and all my USB ports with no luck either.
I went on the WD Web site, but they do not offer anything other than a partitioner that I would save rather than as a last resort as there are a number of things on the hard drive I want to save.
So it's not like it's a new HD to be partitioned or an old man who comes out crapped. I know there's the data I just need to get home long enough to get what I need. Maybe I missed my window, but maybe I did not. Maybe someone can help. I'm at the end of my mind on this thing.
Sounds like a problem of partition (maybe corrupted partition tables) if the device is recognized, but not the 'disk '.
There are recovery/repair partition about tools. Western Digital actually have some but I think that they are made for internal drives.
If I were you, I start with WD and start looking for partition recovery/repair tools. If this is the problem then it is the right kind of problem and you using the right type of solution can fix it easily.
If this is not the case, some data recovery tools can help you recover some files even if you have to recreate a new partition, although I wish you much luck with this approach!
Good luck whatever you try and make sure that you do not overwrite the what partition information, you have without making backups (many partition edititing software will offer backups)
-
USB-6008 appears in Device Manager but not in MAX or Labview
I use Windows 7 Ultimate 32-bit and you want to use a USB-6008 in LabVIEW 8.5.1. The device appears under data acquisition devices in the Windows Device Manager. The flashing on the device, but the device does not appear in the Explorer of Measurement & Automation 8.7.1. am I missing something?
He doubts.
First, check the easy things... to refresh the list of devices to MAX and see if it comes to that. I'm guessing you've already tried this, but it never hurts to check.
My bet is that it's a database corrupted Max. This happens from time to time. Usually when I see it, the 'Dev1' always appears in LabVIEW if you plop down constant DAQ hardware or control.
There are tools and processes to erase and start over with a new database, but in my experience, the best way to resolve it is simply update or reinstall MAX.
-
HP Pavilion DV6-1245dx update to Windows 7 (from Vista).
I had the problem of no sound on my TV with the HDMI connection. I had the brilliant idea to remove the driver and reinstall. The problem is that after I deleted the driver (do not know exactly what other that it was connected to the HDMI audio), the HDMI option as a playback device has disappeared. I clicked on "update driver software" (Intel High Definition Audio HDMI) in Device Manager (he said I had the current driver) and restarted. Yet, no HDMI option on the 'reading devices' screen. Any thoughts would be much appreciated!
Thanks DP - K. I've updated the OP with model and noted the upgrade.
In other news, I plugged a cable HDMI to the TV and then the HDMI in the "playback devices" window option became available. I removed the cable HDMI and sound still there. Again, I don't have audio, but will follow the fixes posted in other threads for that one. So I guess I'm fixed - I call this 'resolved' - thank you!
-
Hard drive shows in the Bios and Device Manager but not in disk management.
I recently had a hard drive fail because of the excessive heat in the computer case (he also took a memory too). When I plug the drive as a secondary drive in any computer it will appear in the Bios and the Manager of devices, but not in disk management, nor can it be considered be as ZAR and Spinrite disk utility.
The disc spins up and down when turned on and seems to work. Just trying to recover data from the disk, so I can put it on a new drive.
Any ideas?
If its not shown in disk management I would use this bootable HD to the utility check disk (probably all riders is set correctly?)
-
Hard drive shows up in Device Manager, but not in 'my computer '.
I have a Samsung HD103UI SATA hard drive in a dual docking station Thermaltake Black Widow hard drive. I connected it to my laptop via a USB port. It appears in Device Manager and says it's working properly. It however does not appear in my computer. I go to disk management and presents itself, he says "Dynamic Disk 1, invalid. If I right click on the drive, it asks if I want to convert it to base, but if I do that I will lose my data. I hooked this same configuration of my XP machine and it worked fine, no problem. How can I fix without basic conversion and how do I get it to appear in my computer?
End to this problem, that I had the hard drive on the xp machine unload everything out of it and reformat the hard drive on my Vista laptop. I did once it worked fine and I can move it back from my xp and vista machine. It's the only way I could get this drive to work.
-
I'm trying to connect to my external hard drive, but the auto test failed
and I know that the problem is not the cable or anything like this cause it works on other 2 computers
It won't work on my laptop
I tried many solutions but most of them that the hard disk appears in disk managementand they change its trajectory
but in my case that's not she appears only in management device that I tried to uninstall it but also did not work
After that I did any suggestions? !Go to your computer manufacturer's support web site and search for the latest Windows 7 drivers for your specific model number.
Download the drivers to a folder on your hard drive and install all of them, from the card mother/chipset drivers, LAN, Audio, USB, Graphics, SATA, Webcam, Etc., and so on.
List of computer manufacturer support sites:
http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturersIf you have an Intel motherboard, you can try the Intel driver update utility: http://www.intel.com/support/detect.htm?iid=dc_iduu
Tips for solving common driver problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problemsUpdated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctlyJ W Stuart: http://www.pagestart.com
-
CD-ROM drive detected in BIOS and Device Manager but not Explorer or lag when you click
The last time I tried to use my CD player, it worked very well. I recently got a game perfect state (checked on other computers, so it's good), and I can't install it because of the CD player.
Already, it is detected by the BIOS and in Device Manager it's all updated with all its drivers and no yellow triangles.
The rare opportunity that explore (thus, libraries in my case but nevertheless explorer.exe) fact feel the drive, I click on it and explore lagging until I opened the player and then I get the message "no disc in the drive (bah, I just opened the thing after you moved for hours)" I went to explore running for some time and eventually he listed things that were ready to write on a disk, not to read.
Most of the time traveller feeling even the reader, even though Device Manager and BIOS a. Mr. Fix - It does not work either. They just keep running with nothing doesn't.
On a side note, autorun does not start or when I put in the drive, so windows does not read the disc. The drive works perfectly as I see the LED flashes very quickly and spins the disc.
Hello Izy - H,
The CD/DVD drive may disappear if it has installed third-party filters. I suggest that you try the methods below to resolve this issue.
Method 1:
You can follow the link below and run the Fix - it who will automatically diagnose and repair problems with your CD or DVD drive when trying to read or burn media:
http://support.Microsoft.com/GP/cd_dvd_drive_problems
Method 2:
You can also try to remove the filters manually:
a. Click Start and then click all programs.
b. click Accessories and then click Run.
c. type regedit, and then click OK, if you are prompted for an administrator password or a confirmation, type the password or click on allow.
d. in the navigation pane, search for, and then click the following registry subkey:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
e. in the right pane, click UpperFilters.
Note: You may also see an UpperFilters.bak registry entry. You don't have to delete this entry. Click UpperFilters. If you do not see the UpperFilters registry entry, you may still have to delete the LowerFilters registry entry. To do this, go to step h.
f. in the Edit menu, click on delete.
g. When prompted to confirm the deletion, click Yes.
h. in the right pane, click LowerFilters.
Note: If you do not see the LowerFilters registry entry, unfortunately this content cannot help you further. Go to the section "Next steps" to learn how you can find more solutions or more help on the Microsoft Web site.
i. in the Edit menu, and click on delete.
j. When you are prompted to confirm the deletion, click Yes.
k. exit from the registry editor.
a. restart the computer.
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756 ) how to back up and restore the registry in Windows
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think. -
COM3 showing in Device Manager but not in the list of printer port
I have a Datamax Allegoro printer that uses a USB series converter. The poster converter as installed correctly (in devices and Device Manager) and received COM3.
When I go to change the player of the printer to use the COM3 port, it is not in the list. How can I get the COM port appears in the list of printer ports?
Note: this port was already there, but anyway when I was working on some of the settings (I changed the adapter to use COM1 temporarily as a test, then when I went to change it back, it was gone). I tried to uninstall the driver for the adapter and then re-install again, it did not work.
Thank you.
Use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.
Good luck.
-
I'm putting this new image that I have loaded by ASDM version 5.0 and the name of the image is in my config and I wrote from memory, but all I get is the error message above.
Hello
Referring to the new image of ASDM image ASA (pix 7.x) file?
Anyway, if it doesn't work, try reinstalling the image again through CLI.
a. to load image PIX 7.0-> copy flash tftp:
b. to load ASDM image-> copy tftp flash: asdm
* Make sure that the tftp Protocol is ready, and probably to remove previous load from file.
Once the installation is completed and after reboot, check the loaded file using 'sh version' command. You can also use 'sh bootvar' command to check system startup properties and image which is responsible for operating the unit.
Rgds,
AK
-
Hard drive of device cleaning but not in Solution Explorer.
My second hard drive appears in Device Manager but not in Explorer Windows.
Are you sure that your second hard drive is already partitioned & not empty?
If you are sure then:
Open the command prompt > type "diskpart" & press enter > type "rescan" & press enter
You need administrator account to perform this task.
To affect readers:
Right-click on the computer icon on desktop > Manage > double-click Disk Management > see if there any unassigned disk exist or not
If exists then manually 'change the letter from reader & Path '.
If not exist to them discuss the second drive hard condition seen here as a schema Partition table. If possible, take a screenshot and upload it & share it with us.
For more information download a screen shot here:
http://social.answers.Microsoft.com/forums/en-us/answersfeedback/thread/dfd9a97c-E6A1-4226-8c9d-59101a62bf7c
Let us know if you need additional assistance.
If you get the answer to your question, please go back and mark the reply as an answer while others may find it.
If you get helped by a response to someone else's question, please indicate the useful post.
S.Chatterjee
Maybe you are looking for
-
Problems with the feature 'Parked' (iOS 10 cards)
I have upgraded to iOS 10 on my iPhone 5 yesterday. I can't get the car parked cards function to work. I activated the following: -All maps Apple Notification options -Location services of maps (when using). 'Always', is not available as an option. -
-
How to export bookmarks in FF4? (I have the option "Organize bookmarks")
On the Bookmarks tab, I don't have an option to organize the bookmarks. I have a new pc and I am trying to export and import my favorites. I use FF 4 on both computers.
-
The problem with the bureau.
Hello All my important icon on my desktop like Skype, Google Chrome etc. show as a microsoft powerpoint icon and I can not enter one any of them, is it a virus or what I can do? Thank you.
-
Can someone tell me how to determine if I have an infrared port on my laptop? I know that an infrared port should have a bit of shiny, dark, plastic that resembles a black window. I have an area above the screen near where the web camera. Can I use m
-
Windows Mail won't let me no in.o2 made all suggested steps nothing helps
How can I access windows mail to me it.o2 tried all the proposed solutions without success