GANYMEDE + failing during the web connection, succeeding the SSH connection.
I have a Ganymede server + configured (tac_plus, freeware). I have one point of access configured to use Ganymede + local as default authentication method. Name of user and password works fine at the guests of SSH/vty, Console connection. However, it fails when you try to access the web interface. When you try to access the ip point http://[access] / he asks a login:
The server [ap ip] request your username and password. The server reports that it is Level_15_access.
If I put in my credentails Ganymede, the authentication prompt appears again.
If I add ip http authentication aaa - authentication of [name of the authentication list] connection, it allows access. I was under the impression that I would not need to add this if RADIUS is configured as the default authentication method.
Current config:
aaa new-model ! ! aaa authentication login default group tacacs+ local aaa authentication login TACAL group tacacs+ local aaa authorization exec default group tacacs+ local aaa authorization commands 15 default group tacacs+ local aaa accounting commands 15 default start-stop group tacacs+ aaa session-id common
tacacs-server host [tacacs+ server IP] key 7 [password] tacacs-server directed-request
ip http server ip http authentication aaa login-authentication TACAL ip http secure-server ip http help-path http://www.cisco.com/warp/public/779/smbiz/prodconfig/help/eag !
It's been a while since I've done AAA on the part of a switch HTTP. However, looking at my notes I used only:
ip http authentication aaa
Basically, without specifying the method. Give that a try and let me know if it works. If it does not do a debugging on Ganymede authentications and after the output here.
Thank you for evaluating useful messages!
Tags: Cisco Security
Similar Questions
-
Hello
first of all, thank you for providing tools such as vCenter Converter for free.
I tried to convert a physical machine to Windows 7 using the current vCenter Converter Standalone (version = 4.3.0 build = build-292238). The target of the conversion is an external USB disk. I am to convert the entire machine, including a disc of about 280 GB in size.
The conversion takes more than 24 hours, but seems to work quite well. Right after training is converted (to about 98% of the whole process), the conversion fails during the reconfiguration with the following error message:
Unexpected exception: converter.fault.FileCreationFault
-ERROR - convert: converter.fault.FileCreationFault
{(converter.fault.FileCreationFault)
dynamicType = < unset >
faultCause = (vmodl. NULL in MethodFault),
file ="
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$ «»MSG = ""
}
There is no other message log of the recent in the converter - server.log. The converter - worker.log says:
from reconfiguring the system...
using temp dir C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig
ReconfigurationTransaction: cached reviews system volume
LocalPathToGuestSystemFolder:
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\LocalUndoFolder:
.\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$Cleaning up the C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory...
TaskImpl failed with MethodFault::Exception: converter.fault.FileCreationFault
Scheduled timer cancelled, succeeds StopKeepAlive
InternalTask2VmomiTaskAdapter updates, States: 4, percentage: 0, xfer rate (Bps): < unknown >
BaseParserImpl::Parse Config info is not cached
F:\VM\wartberg\wartberg.vmx analysis
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
NIC has no info support, unable to determine connectionType
Registry hive
. \vstor2-mntapi10-shared-468030AD0004C435020000000C000000
Boot\BCD is responsible under the name mntApi397493888030118019Error 13 read the value of the element of key mntApi397493888030118019\Objects\ {9dea862c-5cdd-4e70-acc1-f32b344d4795} \Elements\24000001
MntApi397493888030118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi3984454896301180192 error reading value CSDVersion key mntApi398445489630118019\Microsoft\Windows NT\CurrentVersion
2 error reading information SP
CurrentType key is multiprocessor free
2 error reading CurrentType mntApi398445489630118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value
2 error reading 64 bits of information, probably not a 64-bit system
the product name is Windows 7 Home Premium
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi404763500730118019Error reading the mntApi404763500730118019\ControlSet001\Services\vmxnet - 2.
Error 2 vmxnet information, assuming that vmxnet is not installed
MntApi404763500730118019 hive unloaded
MntApi398445489630118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi406994304730118019MntApi406994304730118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi4192247261301180192 error reading value CSDVersion key mntApi419224726130118019\Microsoft\Windows NT\CurrentVersion
2 error reading information SP
CurrentType key is multiprocessor free
2 error reading CurrentType mntApi419224726130118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value
2 error reading 64 bits of information, probably not a 64-bit system
the product name is Windows 7 Home Premium
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi425417937030118019Error reading the mntApi425417937030118019\ControlSet001\Services\vmxnet - 2.
Error 2 vmxnet information, assuming that vmxnet is not installed
MntApi425417937030118019 hive unloaded
MntApi419224726130118019 hive unloaded
Registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi427773541230118019MntApi427773541230118019 hive unloaded
Failed to get the volume mount points 640 (03 = * 00 > 7000000000000: 4146 (type = 2, code = 259))
VMOUNT library: 1450 error communication error with the pilot while
Error 1016 (hive to load error: unknown error 1016 (0x3f8) (1016)) temporary hive loading
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE under the name of the mntApi367215230118020 key.Unable to load the registry hive
.\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE, error 0x3f8.Error 16258 when you open the software hive
Failed to get the volume mount points 640 (03 = * 5320000000:00404, 16258 (type = 2, code = 1016))
MNTAPI Info OS: Microsoft Windows 7 Home Premium edition: root of home: Windows Service Pack: worm 0: 6.1
OS resides on the disk partition 2 F:\VM\wartberg\wartberg.vmdk path
BaseComputerImpl::Open configuration file: F:\VM\wartberg\wartberg.vmx
WorkerConvertTask: production bundle task agent for task with id = 'task 3 '.
bundle of newspaper http://Converter.Agent.DiagnosticManagerImpl[task-3] Generating task.
http://Converter.agent.DiagnosticManagerImpl creation bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."
http://Converter.agent.DiagnosticManagerImpl adjusted bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."
WorkerConvertTask: recovery agent special newspaper bundle to "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip".
http://Converter.agent.DiagnosticManagerImpl recovery bundle of newspaper with key ' task-3 - qfyxaphl.zip "at offset = '0' and max size ="11155.
WorkerConvertTask: Bundle successfully retrieved from "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip"
Scheduled timer cancelled, succeeds StopKeepAlive
bundle of newspaper http://Converter.Worker.DiagnosticManagerImpl[task 1] Generating task.
As the conversion took more than 24 hours, I would be happy to learn how to avoid this problem or even how to save the VM already created (I don't know if this is possible, but at least the virtual machine appears to be underway, but then crashes saying that a required device is not present).
Any help is appreciated!
Thank you
nepper
OK - I'll upload versions changed in maybe 15 minutes
muss weg kurz
_________________________
VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual
-
Photoshop elements 12 fails during the installation of the shared technologies.
I have the same problem as all these people. Yes, I tried all these things, yes I followed all the links and scoured the internet:
http://forums.Adobe.com/message/5914286
http://forums.Adobe.com/message/5909390#5909390
http://forums.Adobe.com/message/5904696#5904696
Elements of 12 install fails during the installation of Adobe Organizer. No indication of problems in the newspapers, just fails and rolls back. Near as I can tell that people at adobe don't know what is the real problem, they have only a long series of very complicated and obscure tricks that _might_ "solve" the problem. I tried all in all imaginable combinations and still can not get 12 items to install. I installed win7 vanilla stock, plain, applied patches, tried to install it and it always fails.
I repeat. This facility has failed me in the same way on a box own win7.
Any software that still requires one of these measures of hack to install must be sent to the shop for more tests. I mentioned to try all these things and more!
Copy the installer to the root of c:
Delete this folder or what
Make a new admin account and install with
Edit the registry
Disable services in msconfig
Install in safe mode
What would be more useful for me now would be either 1) a patch to correct this error of critical installation or 2) explicit explanation from Adobe on what the real problem is so I can fix it myself.
I'm a little upset, sorry for the tone. It is the worst single installation experience that I have ever met.
Hi Jeff,
To follow up, I got an adobeconnect session today with a very competent and friendly adobe technology. It seems that we have solved the problem. There was some kind of problem with air and/or bridge do not store their files updated, not 100% on the part so don't quote me, he said. He said the challenge is to completely uninstall anything adobe and start from scratch. The other option is a bit of hackers, but it works for me and saves me the trouble to completely redo the installation. To track here are the steps to achieve this work, ymmv:
-Go through the Adobe Premiere elements 12 install the process up to the point where the shared components installation crashes. Do not click OK.
-To start the task (ctrl + alt + delete) Manager
-Go to the pane and kill msiexec.exe * 32 process, the adobe Installer must die.
-Remove the Adobe Premiere elements 12 link that is created on the desktop. Do not use this link, it points to the Welcome screen and crashes.
-Also delete C:\Program Files\Adobe\Adobe first Elements, Premiere Elements 12\Adobe 12.exe, for the same reason as above.
-L'exe that works is in this same directory called "Adobe first Elements.exe", he does not attend the Welcome screen and it doesn't seem to work.
-Now it takes Adobe Application Manager to run, and we just killed the installer, so go to catch it:
http://www.Adobe.com/appsmanager
-You don't even have to actually run, just download and install and you're good (if you are not running it she updates to Adobe Creative cloud that is unknown to the consequences).
-Now start Adobe first Elements.exe and connect your adobe ID
-ftw, should be good to go.
I tried this on 3 different machines. The installer beat identical overall and this procedure has got it to work. NB - Organizer apparently still is not installed, but that doesn't bother me. Don't know if this will have an impact long term operations.
Thanks for your help, this doesn't seem to work for me now.
-isaac
-
Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
Qosmio G20 failed during the installation of SP3, now bluescreens on startup!
Any suggestions?
I can't restore to a date prior to the node without danger, he keeps failing?
Please help me...Hello
Have you tried booting with the CD of Microsoft WXP facilities and try to fix it?
Sorry, but I don't see any other solution.A few months ago, I got a blue screen after installing the new software. I tried to do the same with the safe mode and system restore, but it has not t worked for me.
At the end I backed up all my important data and installed new WXP. -
* Original title: 513 CAPI2 event
Hello. We receive an error in the Event Viewer indicating event 513, CAPI2 that contains:
Cryptographic services failed during the processing of the OnIdentity() call in the System Writer object.Details:
TraverseDir: Impossible to push the subdirectory.System error:
Unspecified errorHere are the details:
-
-
513
0
2
0
0
0 x 80000000000000
1039076
Application
KFI - SBS.kfi.local
-
Details: TraverseDir: impossible to push the subdirectory. System error: unspecified error
We did most of the procedures here as well as the patch that has not worked since our server is a Windows Server 2008 SP2. What else can be done so that we can solve the problem of System Writer. Thank you.
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
New installation fails during the expansion of the files Windows 7 Pro
Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.
Motherboard: MSI MPower MaxCPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHzSSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)HARD drive: Seagate 750 G 7200 RPM SATA IIVideo: EVGA GeForce GT 2 640 GBCase: Corsair 400RPower supply: Corsair TX650MCPU cooler: H80iDVD: HP, BluRay BD R/W driveOS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)CPU Temp is around 42 C.If Memtest86 fails then you need to get into the BIOS and set the RAM timing. Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory. Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.
As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.
=============================================================
It's the set of test utilities that I use on every new system that I'm building.
Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.
Disconnect any other (additional) internal hard drives and external USB devices.
Look for any loose hard drive power or cables SATA, graphics card or other power cables.First run Memtest86 +:
It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
sticks are bad or the values of the SPD in the BIOS are correct.
Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
http://www.memtest.org/
Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
http://www.overclockers.com/forums/showthread.php?t=409152Hard drive test:
If you do not know your readers of the brand and model, try "Speccy",.
It provides information from the computer/system in detail:
OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
Note: Option RAM indicates number of slots, DRAM Timing.
Works your memory speed (frequency). The nominal frequency of your memory.
http://www.Piriform.com/SpeccyTest your player - create a Bootable CD:
Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
Note: Reliability of HDD sank medium over the past 18 months.Test your drive with the car manufacture utility.
If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
(bootable CD) and check bad sectors.
SeaTools for information: http://www.seagate.com/support/downloads/seatools/
SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
SeaTools for DOS download:
http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en
Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htmHitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilitiesNotice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/
Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic============================ SSD Test Software =============================
Intel® drive SSD Toolbox
https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455Life of the SSD: http://ssd-life.com/
OCZ Toolbox: http://ocz.com/consumer/download/firmware
SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/
= Once Windows installed =.
Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
Check their support site for the latest drivers as the CD that came with the computer
or motherboard may be older and less stable drivers.Visit the download of the manufacture of the graphics card:
Download and install the most recent Windows 7 or 8 drivers for your card.
ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-usSee also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
or equivalent ATI.Prime 95:
http://www.Mersenne.org/freesoft/
It's a stand alone .exe file contained in an archive .zip.
Simply choose to run the 'stress test' option for 8 hours or more.
If your PC can pass this test, your memory and CPU
are very good (close the housing cover in order to maintain adequate ventilation)Core Temp:
The temperature of each core of the processor.
Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
http://www.alcpu.com/CoreTemp/CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
Watch the clock speed of the CPU under various conditions of loading
(when using speed step technology Intel EIST).
#1 Note:
CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
and the "SPD" tab shows the nominal speeds for each memory location that is filled.
#2 Note:
COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
voltages, temperatures, fans speed.
http://www.CPUID.com/HWMonitor.phpTest of Stress of FurMark GPU (graphics card):
http://www.oZone3D.NET/benchmarks/fur/Pass marks burn in test: http://www.passmark.com/
Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.HD Tune:
Provides information of the car and has an option (tab scan error) to test your drive.
http://www.hdtune.com/CrystalDiskInfo:
http://CrystalMark.info/software/index-e.html
User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).SpeedFan:
Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
It displays your drives model number and compares your drive with other discs of the same brand and model.
Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
http://www.almico.com/SpeedFan.phpGPU - Z:
A utility light, designed for you give information about your video card and GPU.
http://www.techpowerup.com/GPUZ/PC WIZARD:
A powerful utility designed especially for detection of hardware, also analyses more.
He is able to identify a large scale of system components and supports the latest technologies
and standards.
http://www.CPUID.com/pcwizard.phpJ W Stuart: http://www.pagestart.com
-
Original title: Windows 7 system restore always fail.
I get error code 0 x 80070005 that reads "system restore failed during the restoration of the registry since the restore point. I don't have Norton AntiVirus.
If anyone can help solve me this problem I would be very grateful.
Thank you for your response. I forgot to mention in my first post, I tried both methods without success. However, I finally understand how to solve the problem that led me to want to do a restore of the system in the first place. for now, I am therefore able to avoid a system restore.
Thanks again.
-
Test installation of the elements fails during the installation of shared technology
Have tried to install the trial of 10 items on a XP Pro and a Win7 Pro PC and have the same problem.
Test installation fails during the installation of shared Technologies, and then restores the installation of the elements Organizer.
Someone at - he seen this before? Any ideas?
This Adobe document lists installation troubleshooting steps, including the 'Shared Technologies' error:
http://kb2.Adobe.com/CPS/858/cpsid_85843.html
Ken
-
BT Stack installation fails during the installation of device driver - Satellite R830 Windows 7
I have a Toshiba Satellite Pro R830 x 64 with Windows 7.
Recently, I downloaded new Bluetooth drivers from the Toshiba website support for this laptop and tried to install.
The Bluetooth software is installed but the driver (RFBUS) installation fails with the message "Bluetooth RFBUS driver was not installed successfully".I don't understand how the Toshiba Setup program cannot recognize Toshiba hardware.
As a user deaf that I used successfully the function of Bluetooth with my hearing aids to make Skype calls, now whole Bluetooth function is completely non-functional because of failure battery BT driver install.I tried to uninstall and reinstall several times but still get the same message
Help, what do I do to fix this?
File downloaded to install the site Web of Toshiba's v80012_T20110809_x64 as dated 18/08/2011 11.53
Hello
A question: could you please post you completely portable model number?
I'm not quite sure of this model laptop but most of the portable m press a combo of WLan/BT card. This means that a single module shares WiFi and BT connectivity.In this case its need to install an additional driver like BT filter driver package, but this depends on the module that is installed in the unit.
However, I m wondering why try you to install/upgrade to update this BT stack if it worked correctly in the past
-
Update of the WSF fails during the installation of OLIVIER 11.1.1.9.2 on windows
Hello
By updating the WSF using psa.bat when OLIVIER 11.1.1.9.2 on Windows installation I get the following error.
Downloads have been collected from delivery
All other steps are completed successfully until ATGLite update, but following the step to update "update of the WSF" fails with the following error. There was no error in one of my previous steps for this installation.
It is an open question in the forum for the same mistake by an another developed for which there is no resolution.
Please advice.
[2015-09 - 04T 14: 09:19.272 + 05:30] (Framework) [NOTIFICATION] [update. Framework] addition of dependence on dimension MDS for the invocation BI1 plugin
[2015-09 - 04T 14: 09:25.711 + 05:30] (Framework) [NOTIFICATION] [update. Framework] user confirms the condition has been met: complete database backup
[2015-09 - 04T 14: 09:25.711 + 05:30] (Framework) [NOTIFICATION] [update. Framework] user confirms the condition has been met: database version is certified by Oracle Fusion Middleware upgrade
[2015-09 - 04T 14: 09:55.898 + 05:30] (Framework) [NOTIFICATION] [update. Channel for WSF JDBC connection Db framework]: thin: *.
[2015-09 - 04T 14: 10:02.746 + 05:30] (Framework) [NOTIFICATION] [update. Channel for WSF JDBC connection Db framework]: thin: *.
[2015-09 - 04T 14: 10:02.855 + 05:30] (Framework) [NOTIFICATION] [update. Framework] begins to examine the components.
[2015-09 - 04T 14: 10:02.855 + 05:30] (Framework) [NOTIFICATION] [update. The Framework libraries] for WSF. WSF
[2015-09 - 04T 14: 10:02.855 + 05:30] (Framework) [NOTIFICATION] [update. C:/Oracle/middleware/Oracle_BI1/jlib/FunctionalSetupManagerLitePlugin.jar frame]
[2015-09 - 04T 14: 10:02.871 + 05:30] (Framework) [INCIDENT_ERROR] [UPGAST-00056] [update. Framework] error of initialization of the plugin update for the WSF. WSF
[2015-09 - 04T 14: 10:02.871 + 05:30] (Framework) [INCIDENT_ERROR] [update. Framework] Cause: a unexecpted error occurred a upgrade plug-in initialization.
[2015-09 - 04T 14: 10:02.871 + 05:30] (Framework) [INCIDENT_ERROR] [update. Framework] Action: contact Oracle Support. See the secondary error for more details.
[2015-09 - 04T 14: 10:02.871 + 05:30] (Framework) [INCIDENT_ERROR] [update. Framework] []
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeConstructorAccessorImpl.newInstance0 (Native Method)
at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:62)
at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:45)
at java.lang.reflect.Constructor.newInstance(Constructor.java:422)
at oracle.ias.update.plugin.Plugin.instantiatePlugin(Plugin.java:241)
to oracle.ias.update.plugin.Plugin. < init > (Plugin.java:222)
at oracle.ias.update.plugin.Plugin.getPlugin(Plugin.java:156)
at oracle.ias.update.plan.PlanStep.getPlugin(PlanStep.java:273)
at oracle.ias.update.plan.PlanStep.examine(PlanStep.java:286)
at oracle.ias.update.UpgradeDriver.doExamines(UpgradeDriver.java:395)
at oracle.ias.update.gui.UAExamineThread.run(UAExamineThread.java:44)
Caused by: java.util.MissingResourceException: can't find oracle.apps.setup.lite.upgrade.plugin.UpgradePluginResourceBundle bundle
at java.util.logging.Logger.setupResourceInfo(Logger.java:1945)
to java.util.logging.Logger. < init > (Logger.java:380)
to java.util.logging.Logger. < init > (Logger.java:374)
to oracle.ias.update.UpgradeLogger. < init > (UpgradeLogger.java:57)
at oracle.ias.update.UpgradeLogger.getLogger(UpgradeLogger.java:90)
at oracle.ias.update.LoggingManager.create(LoggingManager.java:287)
at oracle.ias.update.plugin.UpgradePlugin.createPluginLogger(UpgradePlugin.java:142)
to oracle.ias.update.plugin.UpgradePlugin. < init > (UpgradePlugin.java:127)
to oracle.apps.setup.lite.upgrade.plugin.UpgradeSchemaPlugin. < init > (UpgradeSchemaPlugin.java:57)
... 11 more
]]
[2015-09 - 04T 14: 10:02.871 + 05:30] (Framework) [ERROR] [UPGAST-00182] [update. Frame] the phase of investigation for WSF plugin. WSF will not run due to a previous error.
[2015-09 - 04T 14: 10:02.871 + 05:30] (Framework) [ERROR] [update. Framework] Cause: an error occurred when loading or initialization of the plug-in which prevents the implementation of the phase requires.
[2015-09 - 04T 14: 10:02.871 + 05:30] (Framework) [ERROR] [update. Framework] Action: review the log file for more details.
[2015-09 - 04T 14: 10:02.871 + 05:30] (Framework) [NOTIFICATION] [update. Finishing frame] examination of the components.
Hi, it solved finally got with this
Navigate to the following location and run the command
\Middleware\Oracle_BI1\biapps\tools\lib
update the settings in the following command and run it, it works very well
java-jar biappsrepositoryutil.jar upgradeFSM bi.oracle.home=C:\Oracle\Middleware\Oracle_BI1 work.dir = C:\wkdir biacomp.user = DEV_BIACOMP biacomp.password = db.conn.sid.url = localhost:1521:orcl fsm.db.seed.url=localhost:1521/orcl db.sys.user = sys db.sys.password oracle = *.
-
root.sh failed during the installation of RAC11.2g
Dear,
I try to install RAC 11.2 (version of the grid Infrastructure is 11.2.0.1) on both nodes of linux (OS version is 2.6.39 - 400.215.10.el5uek Oracle Linux 5.11)
SELinux + Firewall is stopped, ASM works fine (listdisks and querydisk has my drives correctly), ping between two nodes on public and private IPs is OK, the hosts file, configured for good.
Owner of the DSO is grid user, and this user is the same used during the installation of the grid infrastructure.
# /sbin/modinfo oracleasm filename: /lib/modules/2.6.39-400.215.10.el5uek/kernel/drivers/block/oracleasm/oracleasm.ko description: Kernel driver backing the Generic Linux ASM Library. author: Joel Becker <[email protected]> version: 2.0.8 license: GPL srcversion: 28484D2A43A6D981AAB9246 depends: vermagic: 2.6.39-400.215.10.el5uek SMP mod_unload modversions parm: use_logical_block_size:Prefer logical block size over physical (Y=logical, N=physical [default]) (bool)
Installation was fine, no errors or warnings until running root.sh, the result was:
# /opt/app/grid/product/11.2.0/grid/root.sh Running Oracle 11g root.sh script... The following environment variables are set as: ORACLE_OWNER= grid ORACLE_HOME= /opt/app/grid/product/11.2.0/grid Enter the full pathname of the local bin directory: [/usr/local/bin]: Copying dbhome to /usr/local/bin ... Copying oraenv to /usr/local/bin ... Copying coraenv to /usr/local/bin ... Creating /etc/oratab file... Entries will be added to the /etc/oratab file as needed by Database Configuration Assistant when a database is created Finished running generic part of root.sh script. Now product-specific root actions will be performed. 2015-04-20 17:06:03: Parsing the host name 2015-04-20 17:06:03: Checking for super user privileges 2015-04-20 17:06:03: User has super user privileges Using configuration parameter file: /opt/app/grid/product/11.2.0/grid/crs/install/crsconfig_params Creating trace directory LOCAL ADD MODE Creating OCR keys for user 'root', privgrp 'root'.. Operation successful. root wallet root wallet cert root cert export peer wallet profile reader wallet pa wallet peer wallet keys pa wallet keys peer cert request pa cert request peer cert pa cert peer root cert TP profile reader root cert TP pa root cert TP peer pa cert TP pa peer cert TP profile reader pa cert TP profile reader peer cert TP peer user cert pa user cert Adding daemon to inittab CRS-4123: Oracle High Availability Services has been started. ohasd is starting acfsroot: ACFS-9301: ADVM/ACFS installation can not proceed: acfsroot: ACFS-9302: No installation files found at /opt/app/grid/product/11.2.0/grid/install/usm/EL5/x86_64/2.6.18-8/2.6.18-8.el5uek-x86_64/bin. CRS-2672: Attempting to start 'ora.gipcd' on 'node01' CRS-2672: Attempting to start 'ora.mdnsd' on 'node01' CRS-2676: Start of 'ora.gipcd' on 'node01' succeeded CRS-2676: Start of 'ora.mdnsd' on 'node01' succeeded CRS-2672: Attempting to start 'ora.gpnpd' on 'node01' CRS-2676: Start of 'ora.gpnpd' on 'node01' succeeded CRS-2672: Attempting to start 'ora.cssdmonitor' on 'node01' CRS-2676: Start of 'ora.cssdmonitor' on 'node01' succeeded CRS-2672: Attempting to start 'ora.cssd' on 'node01' CRS-2672: Attempting to start 'ora.diskmon' on 'node01' CRS-2676: Start of 'ora.diskmon' on 'node01' succeeded CRS-2676: Start of 'ora.cssd' on 'node01' succeeded CRS-2672: Attempting to start 'ora.ctssd' on 'node01' CRS-2676: Start of 'ora.ctssd' on 'node01' succeeded DiskGroup DATA creation failed with the following message: ORA-15018: diskgroup cannot be created ORA-15130: diskgroup "DATA" is being dismounted Configuration of ASM failed, see logs for details Did not succssfully configure and start ASM CRS-2500: Cannot stop resource 'ora.crsd' as it is not running CRS-4000: Command Stop failed, or completed with errors. Command return code of 1 (256) from command: /opt/app/grid/product/11.2.0/grid/bin/crsctl stop resource ora.crsd -init Stop of resource "ora.crsd -init" failed Failed to stop CRSD CRS-2673: Attempting to stop 'ora.asm' on 'node01' CRS-2677: Stop of 'ora.asm' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.ctssd' on 'node01' CRS-2677: Stop of 'ora.ctssd' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'node01' CRS-2677: Stop of 'ora.cssdmonitor' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.cssd' on 'node01' CRS-2677: Stop of 'ora.cssd' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.gpnpd' on 'node01' CRS-2677: Stop of 'ora.gpnpd' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.gipcd' on 'node01' CRS-2677: Stop of 'ora.gipcd' on 'node01' succeeded CRS-2673: Attempting to stop 'ora.mdnsd' on 'node01' CRS-2677: Stop of 'ora.mdnsd' on 'node01' succeeded Initial cluster configuration failed. See /opt/app/grid/product/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_node01.log for details
I found the rootcrs_node01.log file:
2015-04-20 17:06:20: Removing "/etc/rc.d/rc3.d/S96ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc3.d/S96ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc3.d/S96ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc3.d/S96ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc5.d/S96ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc5.d/S96ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc5.d/S96ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc5.d/S96ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc0.d/K19ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc0.d/K19ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc0.d/K19ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc0.d/K19ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc1.d/K19ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc1.d/K19ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc1.d/K19ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc1.d/K19ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc2.d/K19ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc2.d/K19ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc2.d/K19ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc2.d/K19ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc4.d/K19ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc4.d/K19ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc4.d/K19ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc4.d/K19ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: Removing "/etc/rc.d/rc6.d/K19ohasd" 2015-04-20 17:06:20: Removing file /etc/rc.d/rc6.d/K19ohasd 2015-04-20 17:06:20: Failure with return code 1 from command rm /etc/rc.d/rc6.d/K19ohasd 2015-04-20 17:06:20: Failed to remove file: 2015-04-20 17:06:20: Creating a link "/etc/rc.d/rc6.d/K19ohasd" pointing to /etc/init.d/ohasd 2015-04-20 17:06:20: The file ohasd has been successfully linked to the RC directories
What did I miss?
Kindly advice...
Best regards
Hello
It seems some problems with the drive carrier
Create DiskGroup DATA failed with the following message is displayed:
ORA-15018: diskgroup cannot be created.
ORA-15130: diskgroup 'DATA' is currently disassembled
Check below link, seems a similar question:
ASM error in root.sh createdisk
Thank you
Monowar
-
WebService call failed during the test adapter for oracle applications
In SOA 11 g, when I test my application that uses Oracle Applications card it gives an error "Webservice invocation failed. The error stack is
oracle.sysman.emSDK.webservices.wsdlapi.SoapTestException: Exception occurred when the link was invoked.
Exception occurred during invocation of the JCA binding: "binding JCA execute of operation 'getDailyRatesAdpSelect' failed due to the reference: connection problem component binding JCA.".
JCA Binding component is unable to create an outgoing connection of JCA (CCI).
+ OutboundR12:getDailyRatesAdp [getDailyRatesAdp_ptt::getDailyRatesAdpSelect (getDailyRatesAdpSelect_inputParameters, GlDailyRatesInterfaceCollection)]: the JCA Binding component was unable to establish an outgoing connection of JCA CCI due to the following problem: BINDING. JCA-12510 +.
Location of JCA resource adapter error.
Cannot find the adapter in JCA resources via the element of the binding .jca file
The Binding of JCA component is unable to the adapter resources specified in the startup item: location = "jdbc/EI/R12.
The reason is most likely to be
+ 1) the resource adapter RAR file has not been deployed successfully to the WebLogic application server or +.
+ 2) the "element in weblogic - ra.xml has not been defined in eis/jdbc/R12. In the latter case, you need to add a new factory of connections from WebLogic JCA (deploy a RAR). +
Please fix this and then restart the application server
The same as xADataSourceName the value of the Data Source JNDI name, but still get this error.
Specify the location of the ra.xml file - weblogic and steps to guide to solve this problem.
Thank you
SadiaLooks like the Oracle Application adapter is not running.
Connect to the weblogic administration console on your left window, click on * "Deployments" *, and then click your right window, under summary of deployments, check the status of * "OracleAppsAdapter."
It should be in Pavilion OK, so that it can reproduce and accepting applications.Thank you
Vijay -
dbAdapter fails during the call to procedure package oracle object type in the parameter out
JDeveloper 1.1.1.6
Oracle 11g
Existing package procedure is defined with the table of objects in input parameters and.
Package myPackage
procedure processRecon (numero_projet VARCHAR2,
INST_ID select NUMBER,
recon_type VARCHAR2,
gis_design_stock GMPVT. GMPVT_GIS_DESIGN_STOCK_T,
stock_uop GMPVT. GMPVT_STOCK_CODES_T,
x_status OUT VARCHAR2,
x_escalation OUT VARCHAR2,
x_recon_error ON GMPVT. GMPVT_GIS_RECON_ERR_T) IS
GMPVT. GMPVT_GIS_RECON_ERR_T is an array of GMPVT objects. GMPVT_GIS_RECON_ERR, who has 12 fields including the new I added it.
I have added a new field to the GMPVT object. GMPVT_GIS_DESIGN_STOCK, where GMPVT. GMPVT_GIS_DESIGN_STOCK_T is a table of GMPVT. GMPVT_GIS_DESIGN_STOCK, no problems encountered during the test.
Next, I added a new field for the object of type GMPVT. GMPVT_GIS_RECON_ERR, the following error below occurs when the DBAdapter is called
< Summary > Exception occurred when the link was invoked. Exception occurred during invocation of the JCA binding: "JCA binding run operation 'processStockRecon' failed due to the reference: Interaction processing error." Error in the processing of applications from running. GMP_SOA_RECON_PKG. Interaction of the PROCESSRECON API. An error occurred during the processing of the interaction to invoke APPS. GMP_SOA_RECON_PKG. PROCESSRECON API. Cause: java.lang.ArrayIndexOutOfBoundsException: 12 check to make sure that the XML file containing the data of the parameter matches the parameter definition in the XSD. This exception is considered non reproducible, probably due to an error of modeling. ". The called JCA adapter threw an exception of resource. Please review the error message above carefully to determine a resolution. < / Summary >
I confirmed that the XSD for the stored procedure has in fact change, which has been generated by JDeveloper as I refreshed the database adapter.
The statement "Cause: java.lang.ArrayIndexOutOfBoundsException: 12" I can't that assume somehow SOA has 12 parameters but the 12 setting was not saved.
Any thoughts on what I might be missing. I can provide more information if necessary.
Hello
This problem has been resolved. Not deployed SOA composite and then deployed to the server of the SOA. For some reason, SOA has been either you see does not changes in the file XSD (cached?) or the XSD was not get updated.
Thank you
-
Setting UP SSH without PASSWORD fails during the installation of the grid
Hello
The operating system and the virtual machine configuration:
There are 2 physical Oracle servers base (model # 2 - Oracle SPARC Solaris 11.1, T4). On both machine 'Oracle VM for SPARC' software is installed and logical domains are configured with Solaris 11.1. Oracle RAC 2 node cluster is currently Setup between the logical field in each of the servers.
Objective:
We plan to install and configure Oracle RAC 11 g R2 (11.2.0.4) on two machines of Oracle VM. Control script of pre-installation (runcluvfy.sh) on the RAC node is completed without errors/warning.
Question:
During the installation of oracle grid infrastructure, SSH configuration failed and on the shell prompt shows JVM CRASH LIB...
I'm not able to install RAC because of this problem.
Your suggestions/help will be greatly appreciated.
Thank you.
Support of Oracle suggested to commented LD_LIBRARY_PATH to the grid user profile
So I think that you should continue to discuss with Oracle Support.
They are more that we know.
Concerning
Mr. Mahir Quluzade
-
DAC: task failed during the ETL for financial applications
I'm looking for my first ETL on OLIVIER 7.9.6.4
I use Oracle EBS 12.1.1 as source system.
the ETL full 314 tasks successfully, but it fails at the task named:
'SDE_ORA_GL_AR_REV_LinkageInformation_Extract '.
DAC error log:
=====================================
STD OUTPUT
=====================================
Informatica (r) PMCMD, version [9.1.0 HotFix2], build [357.0903], 32-bit Windows
Copyright (c) Informatica Corporation 1994-2011
All rights reserved.
Called Wed Sep 18 09:46:41 2013
Connected to the Service of integration: [infor_int].
File: [SDE_ORAR1211_Adaptor]
Workflow: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Instance: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
Mapping: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract]
Session log file: [C:\Informatica\server\infa_shared\SessLogs\. SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log]
Success of the source lines: [0]
Source has no lines: [0]
Target lines of success: [0]
Target lines failed: [0]
Number of errors in transformation: [0]
First error code [4035]
First error message: [[error SQL RR_4035
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATI]
Task run status: [failure]
Integration service: [infor_int]
The integration of Service process: [infor_int]
Grid integration Service: [infor_int]
----------------------------
Name of node [node01_AMAZON-9C628AAE]
Fragment of preparation
Partition: #1 [Partition]
Instance of transformation: [SQ_XLA_AE_LINES]
Transformation: [SQ_XLA_AE_LINES]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last [16004] error code, message [ERROR: prepare failed.: []]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_CO]
Departure time: [Sat Oct 18 09:46:13 2013]
End time: [Sat Oct 18 09:46:13 2013]
Partition: #1 [Partition]
Instance of transformation: [W_GL_LINKAGE_INFORMATION_GS]
Transformation: [W_GL_LINKAGE_INFORMATION_GS]
Apply the lines: [0]
Number of rows affected: [0]
Rejected lines: [0]
Throughput(Rows/sec): [0]
Throughput(bytes/sec): [0]
Last error code [0], message [no errors].
Departure time: [Sat Oct 18 09:46:14 2013]
End time: [Sat Oct 18 09:46:14 2013]
Disconnection of Service integration
Completed at Wed Sep 18 09:46:41 2013
-----------------------------------------------------------------------------------------------------
Informatica session log files:
DIRECTOR > VAR_27028 use override the value [DataWarehouse] session parameter: [$DBConnection_OLAP].
DIRECTOR > VAR_27028 use override the value [ORA_R1211] for the session parameter: [$DBConnection_OLTP].
DIRECTOR > VAR_27028 use override the value [.] SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full.ORA_R1211.log] for the session parameter: [$PMSessionLogFile].
DIRECTOR > VAR_27028 use override the [26] value for parameter mapping: [$DATASOURCE_NUM_ID].
DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_ID].
DIRECTOR > VAR_27028 use override the value [' n '] parameter mapping: [$FILTER_BY_LEDGER_TYPE].
DIRECTOR > VAR_27028 use override value for the parameter mapping]: [$$ Hint1].
DIRECTOR > override VAR_27028 use value [01/01/1970] parameter mapping: [$INITIAL_EXTRACT_DATE].
DIRECTOR > override VAR_27028 use value [01/01/1990] parameter mapping: [$LAST_EXTRACT_DATE].
DIRECTOR > VAR_27028 use override value [1] to parameter mapping: [$LEDGER_ID_LIST].
DIRECTOR > VAR_27028 use override the value ["NONE"] parameter mapping: [$LEDGER_TYPE_LIST].
DIRECTOR > session initialization of TM_6014 [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] at [Sat Oct 18 09:46:13 2013].
DIRECTOR > name of the repository TM_6683: [infor_rep]
DIRECTOR > TM_6684 server name: [infor_int]
DIRECTOR > TM_6686 folder: [SDE_ORAR1211_Adaptor]
DIRECTOR > Workflow TM_6685: [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] running Instance name: Id series []: [2130]
DIRECTOR > mapping TM_6101 name: SDE_ORA_GL_AR_REV_LinkageInformation_Extract [version 1].
DIRECTOR > TM_6963 pre 85 Timestamp compatibility is enabled
DIRECTOR > the TM_6964 Date of the Session format is [HH24:MI:SS DD/MM/YYYY]
DIRECTOR > TM_6827 [C:\Informatica\server\infa_shared\Storage] will be used as the storage of session directory [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full].
DIRECTOR > cache CMN_1805 recovery is removed when running in normal mode.
DIRECTOR > CMN_1802 Session recovery cache initialization is complete.
DIRECTOR > configuration using [DisableDB2BulkMode, Yes] TM_6708 property
DIRECTOR > configuration using [OraDateToTimestamp, Yes] TM_6708 property
DIRECTOR > configuration using [overrideMpltVarWithMapVar Yes] TM_6708 property
DIRECTOR > TM_6708 using the configuration property [SiebelUnicodeDB, [APPS] @[54.225.65.108:1521:VIS] [DWH_REP2]@[AMAZON-9C628AAE:1521:obiaDW1]]
DIRECTOR > TM_6703 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] is headed by [node01_AMAZON-9C628AAE], version [9.1.0 HotFix2] 32-bit integration Service, build [0903].
MANAGER > PETL_24058 Running score of the Group [1].
MANAGER > initialization of engine PETL_24000 of parallel Pipeline.
MANAGER > PETL_24001 parallel Pipeline engine running.
MANAGER > session initialization PETL_24003 running.
MAPPING > CMN_1569 Server Mode: [ASCII]
MAPPING > code page of the server CMN_1570: [MS Windows Latin 1 (ANSI), superset of Latin1]
MAPPING > TM_6151 the session to the sort order is [binary].
MAPPING > treatment of low accuracy using TM_6156.
MAPPING > retry TM_6180 blocking logic will not apply.
MAPPING > TM_6187 Session focused on the target validation interval is [10000].
MAPPING > TM_6307 DTM error log disabled.
MAPPING > TE_7022 TShmWriter: initialized
MAPPING > Transformation TE_7004 Parse WARNING [IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || > > > > DISTRIBUTION_ID < < < <.
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
< < WARNING PM Parse > > [|]: operand is converted to a string
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | (> > > > DISTRIBUTION_ID < < < <).
SOURCE_TABLE | '~' || DISTRIBUTION_ID)
< < WARNING PM Parse > > [|]: operand is converted to a string
... IIF (EVENT_TYPE_CODE = 'RECP_REVERSE',
IIF (UPG_BATCH_ID > 0,
SOURCE_TABLE | '~' || DISTRIBUTION_ID,
SOURCE_TABLE | ' ~ RECEIPTREVERSE ~' | DISTRIBUTION_ID),
SOURCE_TABLE | '~' || (> > > > DISTRIBUTION_ID < < < <)
]; transformation continues...
MAPPING > Transformation TE_7004 Parse WARNING [JE_HEADER_ID |] '~' || JE_LINE_NUM]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... > > > > JE_HEADER_ID < < < < | '~' || JE_LINE_NUM < < PM Parse WARNING > > [JE_LINE_NUM]: operand is converted to a string
... JE_HEADER_ID | '~' || [> > > > JE_LINE_NUM < < < <]; transformation continues...
MAPPING > Transformation TE_7004 Parse WARNING [AE_HEADER_ID |] '~' || AE_LINE_NUM]; transformation continues...
MAPPING > TE_7004 processing Parse WARNING [< < PM Parse WARNING > > [|]: operand is converted to a string.
... > > > > AE_HEADER_ID < < < < | '~' || AE_LINE_NUM < < PM Parse WARNING > > [AE_LINE_NUM]: operand is converted to a string
... AE_HEADER_ID | '~' || [> > > > AE_LINE_NUM < < < <]; transformation continues...
MAPPING > TM_6007 DTM initialized successfully for the session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full]
DIRECTOR > PETL_24033 all the DTM connection information: [< NO >].
MANAGER > PETL_24004 from the tasks before the session. : (My Sep 18 09:46:13 2013)
MANAGER > task PETL_24027 before the session completed successfully. : (My Sep 18 09:46:13 2013)
DIRECTOR > PETL_24006 from data movement.
MAPPING > Total TM_6660 Buffer Pool size is 12582912 bytes and block size is 128000 bytes.
READER_1_1_1 > DBG_21438 Reader: Source is [54.225.65.108:1521/VIS], [APPS] users
READER_1_1_1 > BLKR_16003 initialization completed successfully.
WRITER_1_ * _1 > WRT_8146 author: target is the database [AMAZON - 9C628AAE:1521 / obiaDW1], [DWH_REP2], loose [on] mode users
WRITER_1_ * _1 > WRT_8106 WARNING! Session Mode Bulk - recovery is not guaranteed.
WRITER_1_ * _1 > target WRT_8124 W_GL_LINKAGE_INFORMATION_GS of Table: SQL INSERT statement:
INSERT INTO W_GL_LINKAGE_INFORMATION_GS(SOURCE_DISTRIBUTION_ID,JOURNAL_LINE_INTEGRATION_ID,LEDGER_ID,LEDGER_TYPE,DISTRIBUTION_SOURCE,JE_BATCH_NAME,JE_HEADER_NAME,JE_LINE_NUM,POSTED_ON_DT,GL_ACCOUNT_ID,SLA_TRX_INTEGRATION_ID,DATASOURCE_NUM_ID) VALUES ( ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?, ?)
WRITER_1_ * _1 > connection WRT_8270 #1 target group consists of target (s) [W_GL_LINKAGE_INFORMATION_GS]
WRITER_1_ * _1 > WRT_8003 writer initialization complete.
READER_1_1_1 > BLKR_16007 player run began.
READER_1_1_1 > RR_4029 SQ [SQ_XLA_AE_LINES] User Instance specified SQL query [SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
[AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ("NO")]
READER_1_1_1 > RR_4049 SQL query sent to the database: (Wed Sep 18 09:46:13 2013)
WRITER_1_ * _1 > WRT_8005 writer run began.
WRITER_1_ * _1 > WRT_8158
START SUPPORT SESSION *.
Startup load time: Fri Sep 18 09:46:13 2013
Target table:
W_GL_LINKAGE_INFORMATION_GS
READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]
READER_1_1_1 > RR_4035 SQL Error]
ORA-00904: "XLA_EVENTS." "" UPG_BATCH_ID ": invalid identifier
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
Fatal error Oracle
Database driver error...
Function name: run
Stmt SQL: SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
[Error fatal Oracle].
READER_1_1_1 > CMN_1761 Timestamp event: [Thu Sep 18 09:46:13 2013]
READER_1_1_1 > BLKR_16004 ERROR: prepare failed.
WRITER_1_ * _1 > WRT_8333 roll back all the targets due to the fatal error of session.
WRITER_1_ * _1 > rollback WRT_8325 Final, executed for the target [W_GL_LINKAGE_INFORMATION_GS] at end of load
WRITER_1_ * _1 > time full load WRT_8035: Sun Sep 18 09:46:13 2013
SUMMARY OF THE LOAD
============
WRT_8036 target: W_GL_LINKAGE_INFORMATION_GS (Instance name: [W_GL_LINKAGE_INFORMATION_GS])
WRT_8044 responsible for this target data no.
WRITER_1_ * _1 > WRT_8043 * END LOAD SESSION *.
MANAGER > PETL_24031
PERFORMANCE INFORMATION FOR TGT SUPPORT ORDER [1] GROUP, SIMULTANEOUS GAME [1] *.
Thread [READER_1_1_1] created [stage play] point score [SQ_XLA_AE_LINES] is complete. Running time total was enough for significant statistics.
[TRANSF_1_1_1] thread created for [the scene of transformation] partition has made to the point [SQ_XLA_AE_LINES]. Running time total was enough for significant statistics.
Thread [WRITER_1_ * _1] created for [the scene of writing] partition has made to the point [W_GL_LINKAGE_INFORMATION_GS]. Running time total was enough for significant statistics.
MANAGER > PETL_24005 from tasks after the session. : (My Sep 18 09:46:14 2013)
MANAGER > task of PETL_24029 after the session completed successfully. : (My Sep 18 09:46:14 2013)
MAPPING > TM_6018 the session completed with errors of processing row [0].
MANAGER > parallel PETL_24002 engine Pipeline completed.
DIRECTOR > Session PETL_24013 run duly filled with failure.
DIRECTOR > TM_6022
PLENARY OF THE LOAD
================================================
DIRECTOR > TM_6252 Source load summary.
DIRECTOR > Table CMN_1740: [SQ_XLA_AE_LINES] (name of the Instance: [SQ_XLA_AE_LINES])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6253 Target Load summary.
DIRECTOR > Table CMN_1740: [W_GL_LINKAGE_INFORMATION_GS] (name of the Instance: [W_GL_LINKAGE_INFORMATION_GS])
Output [0] lines, affected lines [0], applied [0] lines, rejected lines [0]
DIRECTOR > TM_6023
===================================================
DIRECTOR > TM_6020 Session [SDE_ORA_GL_AR_REV_LinkageInformation_Extract_Full] to [Sat Oct 18 09:46:14 2013].
------------------------------------------------------------------------------------------------------------------------------------------------------------------
* I made a few requests in my source (Vision) database, table "XLA_EVENTS" exists, column "UPG_BATCH_ID" exists also
* I added 'XLA_EVENTS' to the FROM clause and he ran in SQL Developer
* in the SELECT clause, I see a column named 'AEHEADER. EVENT_TYPE_CODE ".but there is no table named 'AEHEADER' in the FROM clause
so I added it manually, it is without doubt makes reference to 'XLA_AE_HEADERS '.
The final request looks like this:
SELECT DISTINCT
DLINK. SOURCE_DISTRIBUTION_ID_NUM_1 DISTRIBUTION_ID,
DLINK. SOURCE_DISTRIBUTION_TYPE TABLE_SOURCE,
AELINE. ACCOUNTING_CLASS_CODE,
GLIMPREF. JE_HEADER_ID JE_HEADER_ID,
GLIMPREF. JE_LINE_NUM JE_LINE_NUM,
AELINE. AE_HEADER_ID AE_HEADER_ID,
AELINE. AE_LINE_NUM AE_LINE_NUM,
T.LEDGER_ID LEDGER_ID,
T.LEDGER_CATEGORY_CODE LEDGER_TYPE,
JBATCH.NAME BATCH_NAME,
JHEADER.NAME HOSTHEADERNAME,
BY. END_DATE,
AELINE. CODE_COMBINATION_ID,
AEHEADER. EVENT_TYPE_CODE,
NVL (XLA_EVENTS. UPG_BATCH_ID, 0) UPG_BATCH_ID
DLINK XLA_DISTRIBUTION_LINKS
GL_IMPORT_REFERENCES GLIMPREF
XLA_AE_LINES AELINE
GL_JE_HEADERS JHEADER
GL_JE_BATCHES JBATCH
, GL_LEDGERS T
, GL_PERIODS BY
XLA_AE_HEADERS AEHEADER
XLA_EVENTS
WHERE DLINK. SOURCE_DISTRIBUTION_TYPE IN
("AR_DISTRIBUTIONS_ALL"
"RA_CUST_TRX_LINE_GL_DIST_ALL")
AND DLINK. APPLICATION_ID = 222
AND AELINE. APPLICATION_ID = 222
AND AELINE.GL_SL_LINK_TABLE = GLIMPREF.GL_SL_LINK_TABLE
AND AELINE.GL_SL_LINK_ID = GLIMPREF.GL_SL_LINK_ID
AND AELINE. AE_HEADER_ID = DLINK. AE_HEADER_ID
AND AELINE. AE_LINE_NUM = DLINK. AE_LINE_NUM
AND GLIMPREF. JE_HEADER_ID = JHEADER. JE_HEADER_ID
AND JHEADER. JE_BATCH_ID = JBATCH. JE_BATCH_ID
AND JHEADER. LEDGER_ID = T.LEDGER_ID
AND JHEADER. STATUS = 'P'
AND T.PERIOD_SET_NAME = BY. PERIOD_SET_NAME
AND JHEADER. PERIOD_NAME = PER. PERIOD_NAME
AND JHEADER. CREATION_DATE > =.
TO_DATE (JANUARY 1, 1970 00:00:00 ')
"MM/DD/YYYY HH24:MI:SS")
AND DECODE (', 'Y', T.LEDGER_ID, 1) (1)
AND DECODE (', 'Y', T.LEDGER_CATEGORY_CODE, 'NONE') ('NONE')
* When I run this query, it takes a lot of run time without return no result (it took 4 hours to cancel it, I got the last time)
my questions are:
-What is the problem with this query?-How can I change the query in the workflow?
could someone please help?
Check if the session is reusable or non-reusable. If his re-usable, so you may need to modify the sql query in the window of the tasks
Maybe you are looking for
-
Why text is distorted after windows update and how can I solve this problem?
Hello This morning my windows vista made some updates. Subsequently the Firefix text is exampe is bad, sometimes unreadable, attached. The text is not bad in IE, but change the return isn't desireble. Text was OK before the reboot of Windows Update.
-
page is asking me to update codec interpreter. Don't have not does this. When you try to install malwarebytes, it won't let me no and said that it is impossible to uninstall an old version uninstallation is missing. How can I install a new malwarebyt
-
HP 15 Notebook PC: Wifi connectivity problem
Please help me because I am unable to connect wifi normally. Whenever I want to connect to my wifi, I struggle with my computer for atlest 1/2 hour. For a while, it shows my network in the list of networks and after selection and pasword it throws an
-
You can remove the back cover of the Milestone 2?
Hi I just got my Milestone 2 today (9 December). Because I had to use my old phone for charging the battery I assembled the phone without the SIM card. I want to insert the SIM card now I can't remove the back. I try to push the lens of the camera an
-
I have 2 sets of two xy graphs, I would have both appear on only two graphs (as opposed to four)
I have a program that runs a set of parameters once forwards and graphical results on the graph 'A' and then performs the same settings, but back and graphics of these results on the chart "B". The graphics are in the loop 'For' so that they have a h