Gateway network change after deployment of each will

Similar Questions

• The TS engine insists that my VI prorotype changed after deployment

  But I don't see how, or when, and where.

  I hope I'm just something wrong. My situation is:

  System dev has Dev Suite, using TS 4.2 and LV 8.6.1

  Target system has 4.2 TS, LV 8.6.1 TIME std Base deployment engine

  @ Dev system (TS Seq Ed)

  • TS workspace
  • Outside the program is screw, the workspace includes 3 screws loaded dynamically and the executable file generated from the interface chart single of TS in LV
  • Configure-> adapter-> LV Dev system 8.6.1
  • Tool-> update VI calls
  • (Note that no prototypes have been updated)
  • Tools-> TS unfold
  • Load the deployment configuration file
  • The different ha from the default deployment configuration:

  "Deploy the TS file files" checked

  In "Options of LV' of files distributed:
  'Check for screws broken when parsing' checked

  "Check for broken screw after the Build" checked

  "Remove Unused Components VI" checked

  A program element for the executable of the user interface

  'Create an Installer' checked with the specified directories

  No drivers or selected engines

  • BUILD
  • Tell it to erase the old build directory
  • Generation seems OK - 1 caution regarding the name not renamed/moved (Blasted HP8341 driver)

  Copy the directory Vol 1 tree that results in my flash drive.

  @ The target system (even once, at TS 4.2 base deployment, LV 8.6.1 std RTE)

  • Plug a flash drive
  • Navigate to the installation directory
  • Run "setup.exe".
  • Click on Installer
  • See install go
  • Launch the executable file of the user interface
  • Press 'OK' to the admin, no passwd login
  • Point it @ my SuperDuperSpiffyCoolTS.seq file
  • "Single Pass".
  • BOOM

  "Error loading step"xxxxx"in sequence 'MainSequence' in the file 'SuperDuperSpiffyCoolTS.seq'.

  The prototype of the VI '' has changed.

  The prototype must be updated before you run the VI.

  To update the protytpe, open the dialog box specify Module

  Could not load the related module of a mandatory step. [Error code:-17600]

  • The stage on which it fails is the first step of the 'action' with a LV module in the sequence.

  I can fix by running the sequence 'programmatic_reload.seq' TS OR on the SuperDuperSpiffyCoolTS.seq installed on the target machince and everything works as expected after that.

  So where are my prototypes VI being changed? As part of the deployment step?

  Thanks for any idea/thoughts/help

  Tom McManus

  Hi Tom,

  In my opinion, that you see this behavior because you have the option to "Delete unused components VI" checked in the dialog box Options of LabVIEW VI. If you uncheck this option, your deployment will build properly and you will not see this error on your target computer.

  I tested your attached files with the 'delete unused components VI' option checked and reproduced the error but was unable to reproduce the error with the option unchecked.

  Please test this workaround solution to see if it behaves correctly your side also. Thanks for that bring to our attention! We will work to fix this in a future version of TestStand.

• NOMCLUSTER Essbase 11.1.2.2 change after deployment

  Hello

  We have configured Essbase 11.1.2.2 with NOMCLUSTER evil. Is it possible to change the NOMCLUSTER for this instance? Kindly advice.

  Thank you

  Andy

  Hello

  No, it is not possible to rename cluster or Essbase instance names after the initial Setup. If you must change the instance names and cluster, create the cluster and the new instance. Applications for the export of the old cluster and import them into the new cluster.

  Thank you

  ~ KKT ~.

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• See the settings that will change after Oracle restart

  Hi all

  Oracle 11g

  Linux

  My current SGA is 700M.

  If I give you:

  SQL > alter system set sga_max_size = 2G scope = spfile;

  Modified system.

  SQL > alter system set sga_target = 2G scope = spfile;

  Modified system.

  After that, I won't have to restart the database. But, now, I type "CMS show", that is to show 700M.

  My question is: How can I see the values of the parameters that will change after the instance is restarted? Thank you

  Select *.

  v $ spparameter

  less

  Select *.

  the parameter $ v

  See V$ SPPARAMETER

  --------

  Sybrand Bakker

  Senior Oracle DBA

• FiaW will change after the announcement of the 4.5.1?

  FiaW will change after the announcement of the 4.5.1?

  I know that there is a video while waiting in the 5 days, but in addition to that.

  Thank you.

  We are currently assessing whether update existing videos and exercises for Flex 4.5.1 in anticipation of demand. Please note that existing videos and exercises are always accurate learning help to get in tune with the Flex framework and using Flash Builder.

  We are also finalizing the video pending on the day 5.

  Michael Koch

  Adobe Developer Connection

• Microsoft Movie Maker - cannot change the length of each clip.

  Cannot change the length of each clip on Microsoft Movie Maker.

  I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.

  I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.

  Thank you

  Cannot change the length of each clip on Microsoft Movie Maker.

  I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.

  I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.

  Thank you

  ================================
  The change of setting to: Tools / Options /.
  Advanced... tab applies only to the added clips
  to the timeline * after * you change the setting.

  If you switch to view "Storyboard" and select
  all of the clips as a batch (select one and the type...
  CTRL + A)... you can add the 'Speed Up, Double.
  or "Slow down, half" effect of changing the
  duration. Simply select all clips / right click
  the effect on the menu... Choose...
  Add to storyboard table.

  'Speed Up, Double' cuts the duration of half.

  "Slow Down, half ' double life.

  These effects can be added up to six times.

  If you need finer adjustment...
  the info may be useful:

  You can change the duration for each clip
  manually. Move your pointer autour the
  edge of an element until you see a double red
  arrow. Now, drag the double red arrow...
  you will see if show a ToolTip displays the duration
  train to change.

  Or... just to redo the project after changing
  the long-term: Tools / Options / Advanced
  tab.
  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• VM restarts once after deployment

  Hello

  I use the VMware API Python bindings to deploy new virtual machines templates.

  Part of the deployment is to create a file specification, with a new NETWORK card, for different Mac.

  The virtual machine is ok, boots with the OS image that I want.

  However, I could see that it starts up to a certain point and then restarts once.

  After that everything works fine.

  I'm trying to understand why he did this.

  The model is a RHEL installation, without any currently configured NETWORK card.

  These will be added via the file spec for the deployment.

  My suspicion is that entails once reboot after deployment.

  But I have never seen a VM restarts after I added a NETWORK card to it.

  Any help is very appreciated.

  Thank you

  Christian

  Hi Christian,

  I recommend checking out /var/log/vmware-imc/toolsDeployPkg.log to find out what triggers this restart, and unpacking of the entries in the guest operating system.

  To confirm whether the scripts of customization, the cause, you might want to test the deployment without the customization applied to see how the virtual machine behaves on its own, with none of the steps additional process post-clone.

• Can not activate changes after activation HTTP Tunneling

  Hi Techies,
  
  I'm stuck with OOM while activating the changes after activate us HTTP Tunneling on our PROD environment. using the administration console. Tried to do through WLST aswell but without success. It worked fine on UAT. I wonder why it is not on the PROD. I copy the stack for your reference. Any suggestions on this?
  
  
  # < 26 April 2012 0:01:51 EDT > < error > < Console > < machine01 > < AdminServer > < ExecuteThread [ASSET]: '1' for the queue: '(self-adjusting) weblogic.kernel.Default' > < wlsadmin > <><>< 1335412911650 > < BEA-240003 > < Console met the following error weblogic.management.provider.UpdateException: [management: 141191] the phase of preparation of the configuration update failed with an exception :
  at weblogic.management.provider.internal.RuntimeAccessDeploymentReceiverService.updateDeploymentContext(RuntimeAccessDeploymentReceiverService.java:652)
  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.doUpdateDeploymentContextCallback(DeploymentReceiverCallbackDeliverer.java:133)
  at weblogic.deploy.service.internal.targetserver.DeploymentReceiverCallbackDeliverer.updateDeploymentContext(DeploymentReceiverCallbackDeliverer.java:27)
  at weblogic.deploy.service.internal.statemachines.targetserver.ReceivedPrepare.callDeploymentReceivers(ReceivedPrepare.java:203)
  at weblogic.deploy.service.internal.statemachines.targetserver.ReceivedPrepare.handlePrepare(ReceivedPrepare.java:112)
  at weblogic.deploy.service.internal.statemachines.targetserver.ReceivedPrepare.receivedPrepare(ReceivedPrepare.java:52)
  at weblogic.deploy.service.internal.targetserver.TargetRequestImpl.run(TargetRequestImpl.java:211)
  to weblogic.deploy.service.internal.transport.CommonMessageReceiver$ 1.run(CommonMessageReceiver.java:410)
  to weblogic.work.SelfTuningWorkManagerImpl$ WorkAdapterImpl.run (SelfTuningWorkManagerImpl.java:516)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
  Caused by: means: allocLargeObjectOrArray - size of the object: 2106432, elements of Num: 2106409
  
  at java.util.jar.JarFile.getBytes(JarFile.java:358)
  at java.util.jar.JarFile.initializeVerifier(JarFile.java:317)
  at java.util.jar.JarFile.getInputStream(JarFile.java:386)
  to sun.misc.URLClassPath$ JarLoader$ 2.getInputStream(URLClassPath.java:689)
  at sun.misc.Resource.cachedInputStream(Resource.java:59)
  at sun.misc.Resource.getByteBuffer(Resource.java:155)

  If the OOM error occurs when you deploy for the first time, so we cannot really do much here rather than the two options below:
  1. If it's a great app, then split the application into multiple parts if this is possible, if the application has several modules.
  2 increase the bunch of 1.7 GB and hope that the slight increase will solve the problem.

  If the error occurs after several OOM earthwards, there is a possibility that you hit a bug.
  There are a few bugs of redeployment in WLS10.0. You can request a fix via a request for service support (SR)
  Once again remember that these are bugs related to redeployment only.

  Arun

• G560 - network disconnected after waking up from hibernation

  During the last two days, my laptop Lenovo G560 (running Windows 7, 64-bit, BIOS 2.10) has had problems with its (wired) network card after waking from hibernation. It is shown as disconnected (even as if the cable was physically detached). The only big change I played in the last few days has been installed Service Pack 1. However, the problem only appeared about two days after, so I don't know if this is related at all.

  In this case, IPCONFIG shows the following for the NETWORK card:

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected

  If I try IPCONFIG/renew, I get

  Windows IP configuration

  No operations can be performed on the connection to the Local network, although it has its media disconnected.

  Hovering over the said tray icon "not connected". Troubleshooting of course can't find anything. Also, there is no weird in event viewer entries (unless they are hidden somewhere in other modes). Basically, the behavior is identical to when the network cable is physically disconnected (disconnected).

  In addition, disconnect the network cable, wait a few minutes and in him plugging back again once does nothing.

  For now, I have two workaround solutions:

  -system reboot

  -right click on the connection to the Local network (in network connections), select DISABLE from the menu, wait a few moments and then choosing the option ENABLE on the shortcut menu.

  Is there a better solution to this? Speculation on what might be the reason for this problem all of a sudden?

  Right click on my computer > manage > device management > network cards > select wireless adapter > properties > under power management tab, clear the check box to be able to save "allow the computer to turn off this device to save power".

  Restart your computer and check if it works.

  Please post back with the results.

• Disk space free (compress old files) does not change after you run Disk Cleanup.

  Original title: win. XP disk cleanup

  Win. XP: Free Disk Space (compress old files) does not change after you run Disk Cleanup.  Confused.

  Thank you. VC

  Compress your files, your computer will slow down a lot. I recommend that you don't try this.

• Help! All icons on the desktop has changed after downloading a program! __

  I downloaded a program and just suddenly all my desktop icons changed to the program's icon.  I can't change after reboot, or try to change each one individually through the Properties tab.  Don't know how to get back them.  Any ideas?  Thank you

  Hello

  Restore the. File associations LNK using the 1st link here and others as needed.

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html

  How to set default Associations for a program under Vista
  http://www.Vistax64.com/tutorials/83196-default-programs-program-default-associations.html

  How to associate a file Extension with a program Type in Vistahttp://www.vistax64.com/tutorials/69758-default-programs.html

  How to view and change an Extension of filename on Vista
  http://www.Vistax64.com/tutorials/103171-file-name-extension.html

  How Unassociate a Type of Extension file in Vista and a utility to help
  http://www.Vistax64.com/tutorials/91920-unassociate-file-extention-type.html

  Restore the Type Associations by default Vista file extensions
  http://www.Vistax64.com/tutorials/233243-default-file-type-associations-restore.html
  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• issue after deployment to windows 7. I get the error to follow "the Windows experience index.

  Original title: question after deployment to windows 7.

  I just roll back to windows 7 Windows 10

  the best thing I have ever done in my life.

  .

  Now when I try to run the windows experience index
  I get the follow error
  "The Windows experience index.
  your system could not be calculated.
  before, I update to windows 10

  I don't have this problem
  so, how do I solve this problem?

  Hello

  We appreciate your time and effort to get back to us.

  As the step above did not help, I suggest you to try the steps in the link below and check if it helps:

  Performance Windows ERROR index  

  Experience index Windows error "the windows experience index for your system could not be calculated.

  Let us know the status of the issue. We will be more than happy to help you further.

  Thank you and Merry Christmas to you also.

• product ID changed after linking key ID blackberry playbook

  I got an app BB10 for awhile, so I decided to support the PlayBook too.

  The problem is that my id 'product' somehow changed after you save the signature playbook (.csj) key pair and linking the barsigner.csk to my blackberry id.

  Now, I can not update my application, since even the csk and p12 files original (I had a backup) will produce a different product id.

  How to solve this?

  Connecting the BlackBerry ID token for signature used for development tools PlayBook keys would take the ID from the signature keys and use it when signing with the BlackBerry ID token.  This would cause the error of the Package ID, you get.

  The process is in place to support going the other way (older, keys PlayBook for new BlackBerry ID Token), not the other way around.  I can help to untie your keys.  Send me a private message to the e-mail address of your BlackBerry ID account

  Note that you can sign the PlayBook BAR file using the new blackberry - sign if you want to sign with your BlackBerry ID token.

• I would like to know if the change in the operating system will also change the product ID

  Original title: change of the operating system

  Hello

  I would like to know if the change in the operating system will also change the product ID.

  Please can you me this.

  Hi Agnes,.

  Thanks for posting the request in Microsoft Community Forums.

  1. are you referring to the product key or Product ID?

  2. you try to upgrade to Windows 8.1 with the same product key?

  Product ID is built into the hardware of the machine components. The product key is a 25 character alphanumeric code shown in five groups of five characters each (for example, BCDFG-12345-HJKLM-67890-NPQRS). When you change the operating system, product ID remains the same and not need to change.

  You can reuse the product key in the file product ID for multiple installations of the same version of the operating system. The product key in the product ID file is only used to install Windows.

  The edition of Windows that you are installing must match the product key used to activate Windows. If you use a product key to select a Windows edition, we recommend using the same key to activate Windows, so that the edition you are installing is the same as the edition that you select.

  Work with the keys and product activation

  http://TechNet.Microsoft.com/en-us/library/hh825195.aspx

  Hope this information helps.