Microsoft 5000 wireless mouse does, even with new batteries

Similar Questions

• Microsoft 5000 wireless mouse

  Just installed new mouse microsoft 5000 wireless and it does not.

  Hello
   
   
  Try these things and then let us know if it worked for you.

  The Microsoft mouse pointer moves of erratically or does not respond, the pointing device buttons do not respond, or the pointing device is not detected or does not work.
  http://support.Microsoft.com/kb/321122

  How to troubleshoot problems that you may experience when you use a Microsoft pointing device
  http://support.Microsoft.com/kb/315973

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Microsoft 5000 wireless mouse and keyboard does not.

  I have a problem with the mouse, because the battery led indicator does not work and why I never know when I have a low battery level and this problem also occurs in the keyboard, I use batteries no rechargeable ones, but also tested with rechargeable, and when I put new batteries green light led displays , but then the led turns off and doesn´t work once again, even if it should indicate low battery, I installed the latest drivers for the keyboard and mouse and I Don t know what may cause this situation, I, apreciate your help.

  Hello

  Please contact the Microsoft Community.

  I you have to check out these items-

  http://support.Microsoft.com/kb/838398/en-us

  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/mouse/wireless-Bluetooth

  If nothing is done, then I wish you contact Microsoft Hardware Support for assistance more -.

  http://www.Microsoft.com/hardware/en-us/support/contact-us

  Let us know if you need help pertaining to the Windows operating system.

• My Microsoft 2000 wireless mouse does not work

  Good then when I changed the batteries in the wireless mouse, the led will turn green and then all go off and my mouse does not work, even when he is on the Green, green light is only on during a few seconds.

  Hello

  Please see two items of the below knowledge base for help.

  Troubleshoot a wireless mouse that does not correctly
  http://support.Microsoft.com/kb/321122

  
  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  Kind regards
  Afzal Taher
  Microsoft technical support engineer

• Suddenly, my magic mouse not, turn on even with new batteries.

  Magic mouse does not light

  Are the batteries installed correctly (polarity?) If Yes, then you may need a new mouse.

• FIXED: Photosmart 635 does (even with fresh batteries)

  have not used the camera in a year.  I put new batteries.

  -green light comes on but nothing works.

  -on/off switch causes nothing (the lens does not move)

  -is there some sort of factory reset available?

  FIXED: used end of the paperclip to reset hardware camera (hole in the battery compartment)

  In fact, I found a manual online that says where the hard-reset

  (a small hole hidden inside the battery compartment).

  I used the end of a paper clip.  has had 2 tried, then camera work!

• Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Wireless Microsoft notebook optical mouse does not work with g42 - 410 us laptop

  Hi Mary,

  Did you install all the necessary drivers, firmware and/or software Intellisoft of the mouse and then restart?

  You have good batteries in the mouse?

  Verify that the mouse is compatible with working computer and your operating system?

  Have you checked the mouse icon in the control panel (after all of the above) to a setting to activate?

  Contact the vendor of your computer and see if you need to update something else.  When I installed my wireless mouse, it wouldn't work until I updated the touchpad, the firmware drivers and.

  Good luck!

  Kosh

• MS point 5000 laser wireless mouse does not work, but scrolling and magnifying glass works

  My point of 5000 MS wireless laser mouse does not work, but work wheel Magnifier button and scroll.  What could cause this problem?  I there something wrong with the mouse or something should be cleaned?  This is the first question I had after 3 years of use.

  I have not any hardware or software changes, and the problem is constant, not specific to any application.

  I restored my system to my latest backup when the mouse was working, but it has not solved the problem.  The software update has not solved the problem.

  I installed a different mouse, which works very well. The wireless mouse does not work on another system, I assume that it's broken and I will replace it.

  Thanks for your suggestions.

• can I use a microsoft wireless mouse 4000 bleutooth with a microsoft no nano Transceiver

  The nano microsoft tranciever overheated and stopped working. So I wonder if an another brand nano Transceiver can again function microsoft 4000 wireless mouse?

  Hello

  Transceiver nano Bluetooth USB (Universal Serial Bus) is a Plug-and-Play device, and it should work with Microsoft Bluetooth Mouse.

  I suggest to login and check if it works with Windows7 and let us know if you have any questions, so that we can better help you.

  If the Microsoft Mouse is under warranty then you can ask for the replacement of the mouse as it was affected by overheating.

  See the link below for more information.

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Drains battery in Microsoft 3500 wireless mouse

  Hi guys. I recently brought a Microsoft 3500 Wireless mouse. The battery of the mouse jumps on use continues to 6 hours (even if the transmitter is close), and mouse not responding after that. I noticed that the top surface of the mouse becomes very hot during use. I doubt if I can claim warranty coz I lost the transaction receipt. Any suggestions?

  Hello

  Looks like the mouse has problems.

  Wireless Mobile Mouse 3500 - has a 3 year warranty.
  http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=019&active_tab=systemRequirements

  Microsoft Hardware warranties
  http://www.Microsoft.com/hardware/warranties.mspx

  These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
  contact Microsoft at the number below.

  Hardware support of MS and warranty claims
  Tech Support 1-800-936-5700 for MS Hardware.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Tecra A3 - Creative wireless mouse does not work

  My Creative wireless mouse does not work while the touchpad is installed.

  Even if I turn off the touch pad, the seal of the mouse does not work.

  Anyone know how to fix this?

  Thank you
  R.P.

  Hello

  On this path, it is not easy to say what the problem is. I guess you have some software installations to your external device. Install it and it should work.

  As much I know external mouse functionality does not depend on the touchpad settings.

  Good bye

• Anatel Sony wireless mouse connects erratically with cursor. Battery life is very good. It also seems

  Anatel Sony wireless mouse connects erratically with cursor. The battery life is very good. The cursor problem also seems to be making the top and down arrows on my wired keyboard. When the cursor is engaged the arrows will work. When the cursor does not connect correctly the arrows do not work. The surace the mouse is on doesn't seem to be a factor.

  
  

• PSC 1400v 'check ink cartridges' seeing rest even with new cartridges

  My COPS 1400v 'check ink cartridges' stays on even with new cartridges. I have Windows 7.  I followed the troubleshooting tips to clean the contact points, but not luck.  I bought a carton of off - brand, who worked for a few weeks.  This is the error message at startup.  I replaced the cartridges with the HP brand, but the error light does not turn off.  All advice is appreciated.  I know that this thing is so outdated, but that's all I have right now.  Thank you very much.

  It looks like a case of rejection of the cartridge. You can have a bad ink cartridge, or something more serious. If you have tried all the steps in the document below, then you should try to do a hard reset. If this does not work, the cartridge may be bad and need replaced. Sometimes you get a bad right cartridge against the package. If after changing the cartridge again and again all the troubleshooting steps did not receive the printer print, then you may need to replace the printer.

  Check lights print cartridge flashing:
  http://goo.GL/viF23

  To do a hard reset:
  1. make sure that the printer is turned on.
  2. pull on the power cord from the printer.
  3. pull out the power cord from the wall.
  4. wait for 30 seconds.
  5. plug in the printer and turn it on.

• scrolling feature 4 way in Microsoft 2000 wireless mouse

  Hi, is it possible that I can scroll the 4 way to the average browser left back and the browser just before? Logitech can do that, but it can also do?

  Original title: Microsoft 2000 wireless mouse

  Hello

  Thank you for your update.

  I apologize for any misunderstanding, according to my research on the issue. In this case, I would say contact Microsoft support hardware for control over the issue. It is dedicated to products from Microsoft support and they would be more likely to help you.

  Microsoft: hardware support

  Hope this information is useful. Please do not hesitate to post, in this case, you are facing other problems with Windows in the future. We will be happy to help you again.

• HP wireless mouse does not work most of the time

  Original title: problem with my wireless mouse

  I have a problem, my wireless mouse does not work most of the time it's repair turning market sometimes, sometimes resembles
  dead, what is the problem I have the latest driver updates everything was ok, but 3 days ago, when I try to use it I see that it does not work
  now I can't use it, I try to restore my computer but locks is not any point of restoration and I plug a different usb port on the port still does not, for more than 2-3 minutes sometimes work! , look at these pictures when my mouse is not working the red light does not work!

  What should I do I have this mouse for 3 months when I buy with my hp touch desktop

  
  

  Thanks so much, I change my batteries and now works seems once again, the batteries will go fast
  can u help me to fix the error, I'm showing you pictured RunDll