GatewayEventListener writing behind the question

Similar Questions

• Re: Satellite A300-15 has recovery question: couldn't get a writing of the language of the ini

  I am of the Greece.

  I'm going to start the recovery cd, and it returns the following error:
  + Not able to get a writing of the language of the ini file.
  http://free4U.gr/pics/view-152_DSC01468.jpg

  What to do. ?

  Hello

  Have you tried to repeat the recovery procedure?
  Have you used the recovery disk Toshiba or did you start from HARD drive recovery?

  Check the two procedures;
  First try the recovery of HARD drive; Press F8, and then choose fix my computer and in the new window, follow with HARD drive recovery.

• What is the symbol that looks like a horizontal Z and appears in the gray area behind the image in Lightroom CC? [was: Question]

  Anyone know what the symbol that looks like a horizontal Z and appear in the box grey behind the image in Lightroom CC please?

  It's the sync symbol.

• List of places calendar appears behind the window

  Recently, when I create an event in the calendar v8.0 and start to get into a place, the list of proposed locations appears behind the window of the event, so I can't display the entries of the first on the list. No matter where the event is located on the page, and it comes up with new events or by updating an existing event. Any ideas?

  

  Jac answered my own question but the display if someone else has this problem.

  I use the calendar view to full screen. Toggle mode FS fixed the problem, and he has not returned when return to the FS mode.

  Accumulate points for that?

• new message notification behind the account set-up after the Inbox?

  Hello

  Normally, you have an account with folders by default such as:
  [email protected]
  > Inbox
  > concept
  > model (sjablonen in Dutch)
  > Envoy
  > etc.

  Is there a new mail then it is notified by:
  [email protected]
  > inbox (x)
  > etc.
  And x = 1, 2, 3 (number of messages)

  But my question is, is - it possible to put this behind the accountname as:
  [email protected] (x)
  > Inbox
  > etc.

  Why i ' am asking this? I have several e-mail accounts. Some of them are test accounts. But do not develop all, because it's a long list. Only the first three mail accounts that I use frequently, so they are developed. But if there are new messages for other accounts, then I see immediately, without first developing the account.

  Nico

  Records may be unified are for you.

  View (alt + V) menu > folders > unified

  In this way, you see a single Inbox for all accounts with them individually below.

  This add-on simplifies the views of changing files, if you find that you need to do more than a few times per day.

• 'Reply' / 'Write' form is hidden behind the main screen of you bird

  Since I updated to the latest version of you bird (v.24.6) last week, I am unable to make the electronic form forward when displaying the main screen of boxes to letters. By clicking on the edge of the screen to answer/write will show it only momentarily, then he is hiding behind the screen of mailboxes. To write a new email, I have to minimize the mailbox main screen.

  I looked for an option that will allow the form of response/writing stay on top, but fails. I made no changes to the options when I updated. I forget a new option somewhere?

  Thanks for any help
  P.S. Win 7 x 64

  Matt,

  You nailed it. Without the Add-ons, it works as it should. Now, I have to determine which of my modules is the culprit. I have day some after I installed the last you bird. I have not that much, so it should be an easy thing to disable all and then putting back one by one.

  Thank you.

• Writing in the spreadsheet with the queue

  Hello

  I am a beginner with queues and I have a few questions.  I have attached a simple example of code that I wrote to better implement a consumer who can queue data and write on a worksheet after running the code.

  First of all, I noticed that the queue still has residual remaining after the code ends.  It then writes this element to the file to run the vi.  I can't figure how to get rid of this element.

  Second, anyone have any suggestions to improve this code?  I've been playing with it for quite some time and I finally got to work like that, but it is certainly configured differently from the other examples I've seen.

  Thirdly, I am reading the number of items in the queue, but the two in the loop of the producer and the consumer, told me that there is no element.  How can this be?  My output file seems to work and I certainly put items in the queue.

  Finally, in the future I'll use data from the queue in two places.  Here I've implemented a notifier to do the job.  This is the best method?

  Thanks for your help!

  Jason

  The reason why you do not get the last element of the queue (at least not until you restart the VI) is that you have your automatic indexation tunnel that collects all the data to send to the writing on file SS service cable for moving to register.  So this last piece of data from the queue to get into the shift register, but it is not getting into the 2-D chart by the tunnel of automatic indexing up to the next iteration of the loop.  When you rerun the VI, as the shift register is not initialized, it is already there and became the first point of your next data execution.

  Why did you put the register shift in?  Just remove and just use the tunnel of automatic indexation.

  I don't know what you really want to do with the 2nd loop to say if the Notifier is correct or not.  But if you do not want to lose data in the other loop, then you need to use a second queue and have your producer loop enqueue data in the two queues, a queue for each consumer loop.

  With regard to the elements draws in the queue, seeing how your code is configured, the queue will almost always empty because the dequeue function will be ready to pull out the element immediately after the enqueue function puts in.  Unless you have your loop producer much faster than your consumer loop running, you will not see a build up of the elements.  (Try putting an expectation of more of 100 msec in your loop of consumer.  Then you will see elements accumulate in the queue.)

  I don't know why you put the spreadsheet feature writing after the loop.  Normal use for queues in an architecture of producer/consumer must transmit the data to a separate loop that contains the functions write file.  This way he can work at his own pace, but write the data and make sure that you do not lose it.  As you have now, if your code runs a long time, you may run out of memory when at the tunnel of automatic indexing table becomes too large.  And if your application crashes before you complete it with your stop button, then all data are lost because you did not it writes the file.

• Sequential simultaneous writing of the queue

  Hello everyone, nice day.

  I have what should be a very simple matter.

  I'm currently implemented a producer consumer-consumption-consumer architecture. (Loop acquisition > write disk acquisition > read data from disk data > display of the user based on the data.) In plain language, I have a created the data loop, a loop of these data, a loop of disc storage and a loop displays a user interface. (This isn't supposed to be a real-time application, and I am aware of the charge created by the writing and the reading of the disc). Just stick with me on this one.

  So my problem occurs concerning the second loop. This loop is responsible to write the data be queued (produced in the loop 'Acquisition') on the disk. The problem is also, feeds on a queue to the loop of "reading disc". This configuration causes a few obstacles. The main obstacle arising from the nature of queues of LabVIEW. The loop "write to disk" writes only a part of the queue of the 'Acquisition' at the same time. This general is not really a problem, until you consider that this loop also determines the execution of the loop of "reading disc", with the use of queues. As a result, this loop determines the rate of the next loop and was therefore likely to slow demand and leave a large number of items in the queue. In addition, you must keep in mind, I'm only queueing about 7 MB of data per element, and my HARD drive has a write speed average of 60 MB with a 64 MB cache. Therefore, my installation I can only write one item at a time, therefore making me use only 7 / 60MB of bandwidth from my drive.

  My question is; It be possible to have the loop "write to disk" write several items in the queue at the same time. I hope that I can write simultaneously enough items that I can use my bandwidth 60MO together writing and speed up execution of any sub routines that depend on data written to disk.

  I know there is probably best architecture for this application, but for the moment, I am limited to this architecture. If you have any suggestions for other architectures, I'm more willing to listen to, but coming back I am looking for a way to improvise simultaneous tail reads and then write them to disk with my current structure.

  Thank you all, thank you for the help.
  Taylor S. Amarel
  Learning is alive.

  You can put your element Dequeue function in a loop For and set N to a number so that you get several items from the queue at a given time.  Turn on indexing and you will have a table of data.  Write the table in its entirety on the disc.  This should speed things up a bit.  Don't forget to use shift registers for the sons of the error and the reference to the queue in the loop For and also put a little delay in the loop to stop 100 percent CPU usage.

• Writing to the nodes property DAQmx channel does not refresh the channel values

  Hi all

  I have a riddle.  I created a task programmatically in LabVIEW and programmatically added several analog input channels to the task.  It's easy.

  I wish that my user must be able to modify the individual channels within the task.  To this end, I created a set of screws that allow it to change the settings appropriate to the channel (for example, if it is a channel of thermocouple, it can change the type of thermocouple, CRC value, etc... If it is a strain gauge channel, it can change the coefficient of fish and so on).  These screws all works beautifully, like the VI where they live.

  The specific question that I have is that writing to the channel property nodes refreshes not communication channels.  See the images below.  The first image is the code that needs to define new channels of communication:

  

  Note that immediately after setting the property nodes, I read their values back, just to see what comes out back.

  The second image is an image of the public Service immediately after the execution of this VI.  Note that the values read from the channel property nodes did not updated to match to the set of values, but instead kept their initial configuration values:

  

  What I am doing wrong?  I fought this for a few days now and I'm stumped.

  Thanks for your time!

  Diane

  Hi, Diane.  A week ago, I also had a problem changing the channel properties (not sure that our situtions are exactly comparable, but...).  My 'solution' to want to change the appearance of the task was to just throw the original task and recreate all the elements of the task from scratch.

  I've not done enough 'experiments' to work when you can and cannot change, but am now much more cautious...

  Bob Schor

• What happened to the question/problem, that I just posted? You meet serious accidents on your servers that removes messages?

  I can't find the post I recently set up here. Have you had an accident which deleted all recent messages?
  I wanted to write comments to a suggestion that I got here, which was the use of Acronis as a backup manager...
  Manufactured by MowGreen - thank you for your comments.
  But you might have some use of the comment, what I am to do - I actually tried on the backup program you suggested; Acronis.
  I don't know if you have ever tried to restore a backup? You said that you never 'had to' restore...
  I tried to make a backup of my fresh without Norton and all windows and then tried to restore the backup.

  For me, Acronis 2010 ATI seems pretty useless!

  He could not read that a backup of my discs Inter Raid 5 - OK, can be forgiven.
  But he could not read from a SATA vanilla which contained a backup.
  And when I tried the last option to put a backup on a DVD, the program crashed when trying to read the DVD that contains the backup.
  So you better hope that you never have any of your backups - you will never be able to read from this backup.

  On the problem using Windows Update.
  You said that Norton 360 v2 Online is totally incompatible with Windows Vista (or Windows Update?). I am running Windows XP - is the same true for XP?
  Is this true for the Norton 360 Version 3 too? All products current Norton is not compatible with Windows?

  Here is the text that has been deleted on the Forum server:

  More effective than a virus - KB930494 MS update ends with true Msg that Windows cannot now work correctly

  I started to reinstall Windows XP, after he has screwed up and I discovered that all the system snapshot
  I created backups worthless - MS removes automatically after 90 days...

  But when reinstalling Windows XP Pro MCE 2005 I managed to beat or dodge the many problems - like all the
  famous error when update .NET Framework 1.1 Service Pack 1 and many others
  Suddenly I met an error generated by Microsoft of NONRECOVERABLE type!

  While trying to install Windows, I agreed that Windows was full of bugs and security flaws and
  need a large number of fixpacks installed via Windows Update.
  Such a group of patches is called KB930494 and the full name is:

  .NET framework 1.0 Service Pack 3 SYSTEM. WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Tablet PC Edition

  Windows Update gave a brief error msg that this update has failed and I have tried to run this update
  manually when it produces the following error message: (note he's telling the truth when it)
  claims that "Windows may not work correctly")

  ---
  KB930494 Setup error

  Error while updating your system.
  Windows XP has been partially updated and may not work properly.

  Ok
  ---

  So, this update of Microsoft killed my system - it sure that _ 'does not properly"more.
  Lots of things off, lots of BSOD...

  Og - of course I should have used the system restore and created a backup that I should come back...!
  I did well - but this bomb of viral type of Microsoft made sure it was not possible to create
  a valid system by restoring such a backup. Probably because half the file system matches the other.

  The worst part is - even if I try to reinstall Windows again, avoiding this Virus created by MS, how can I be sure that
  This will be the only disguised bomb nothing extraordinary provided by Windows Update as necessary security patches?

  So guys, what is the best utility backup/restore partition there?

  Rgds. E. Ben

  ---

  Have you checked on the KB930494.log that is in the WINDOW to see where the installation is a failure?
  
  On a clean install of MCE should no problem by installing the SYSTEM .NET Framework 1.0 Service Pack 3 WEB. DLL and MSCOREE. DLL Security Update for Windows XP Media Center Edition and Windows XP Edition Tablet PC less than security software interferes with the installation and/or corrupt .NET update package.

  In addition, it can be an order of updates for .NET 1.0 SP3 installation which will avoid the problem your system knows. You install updates in the order they are presented by automatic updates?

  See also:

  More detailed for .NET Framework 1.0 SP3 and 1.1 SP1 failures troubleshooting ideas
  Questions I've seen so far with the installation of .NET Framework 1.0 SP3 and 1.1 SP1

  As for the backup and restore utilities: http://www.google.com/#hl=en&safe=off&q=Disk+backup&aq=f&aqi=g10&oq=&fp=1&cad=b
  I use Acronis image on my MCE box, but have never had to restore it... yet.

  MowGreen MVP Data Center Management - update of safety Consumer Services

  ---
  Thank you for your response.

  I didn't know about the log file, but watching her (she is very large) it seems is it can only be useful to those writing or working with
  updates...?
  You want to send me the file here? (Probably too big). Or you want I send you the file to watch?

  Only say unique error Code I find gives the following:
  Windows XP has been partially updated and may not work properly.
  29.641: Update.exe extended error code = 0xf070

  Interesting piece of info about security SW, because I have Symantec Norton 360 v2 online riddled with bugs, but I'm not
  optimist that disable Norton 360 Windows Update would do the trick, especially since I had so much
  problems with most of the time updates .NET Framework - it seems that this Windows component is full of problems...

  On the question of the "order of Installation" I initially let Windows Update handle this the way he wanted to.
  After that giving the briefest mention that only KB930494 had failed, I then tried to revive this one update.

  Do you think the system can be restored using the REPAIR, or whatever, or I have to reinstall all windows
  from scratch?

  Kind regards

  ---
  Ben,

  There is no need to send or post the log, because the whole .NET updates installation and OS stability problems are caused by Norton 360.
  Suggest you clean boot Vista as being expected to eliminate all processes and services of Norton to interfere with the installation of the update.
  In fact, you'd be much better off dumping Norton 360 and installing a Windows-compatible antivirus software.
  Then launch their removal tool for Norton ensure all remnants no longer stay or run this tool (AppRemover) as she removes a long list of security products.
  Then download and install one of the free AVs that work well with Windows Vista, Avast or Antivir .

  You can probably repair the OS running sfc/scannow from an elevated command prompt .
  If that can't do the job, then perform an upgrade on the spot .

  MowGreen MVP Data Center Management - update of safety Consumer Services
  ---

  I can't find the post I recently put up here...

  Your history of validation can be found here: http://social.answers.microsoft.com/Forums/en-US/user/threads?user=errbebe

  Always reply to your original thread, please.
  ~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

• How can I fix excerpt: error writing to the file and an unstable WiFi connection

  original title: How can I fix excerpt: error writing to the file

  Hello, I do not know anythingon fixing of my computer when I have problems. I looked at all the research sites and assistance, and none of them helped me with these problems and im getting ready to launch her aspire one mini laptop computer. im running xp and I bought it used and it has done this from day one. 2 weeks ago, that I got it. Please can you help me.

  How can I fix excerpt: error writing to the file C:docume~1\user\local~1\temp\nsvc.tmp\conduit-left.bmp

  and im having problems with my connection remaining on the port wireless what do I do, I can solve this problem too because I cannot even be in line for more then 5 minutes with the duty to stop and start over or repair the connection.

  For the first question, try to go to start | Programs | Accessories | System Tools | Disk Cleanup and that should clear of junk.  Then click Start | Run and type msconfig and disable the startup items, that you don't need, as many programs decide that they must run at startup and clutter the machine when they do not need to.  Also perform a defragmentation of the disk (under system tools also).  See if that helps with performance and other issues.

  Steve

• Add memory to HP ENVY Phoenix 800 - 070st - free space for the locations of memory behind the radiator.

  Hello

  I ordered a HP ENVY Phoenix 800 - 070st with 16 GB of memory and is to be delivered Friday. My question is how much clearance is here to the sticks of memory in the slots behind the radiator and the radiator has to be removed for adding memory to these two locations. Will it take low memory footprint, or is there room for mem sticks with heat sinks. It won't be here until next week, if just trying to plan ahead.

  Thank you

  Bryan

  Gateb, welcome to the forum.

  I can't find any warnings about any of your concerns in the specs of HP.  However, having said that, I suggest wait you receive the computer to make purchases.  HP isn't necessarily embracing third-party updates.  Memory performance with heat sinks can be very important, as you know, or you have asked the question.  Better safe than sorry.  Just my $. 02.

  Moreover, it is a great computer.

  If your problem is solved, please click "accept as a Solution.

• Number shaped with two digits "behind the point" :-)

  Hello

  Please excuse my very bad English because I'm french :-)

  I use the beta JDE v4.7 and the Blackberry Storm Simulator included.

  I would like to know how to format a calculated result as #. # (a floating-point value with two digits "behind the point') to display in a RichTextField instance.

  I tried this:

  """"
  String strSomme;
  String strSommeTTC;
  Double dblSomme;
  Double dblSommeTTC;
                 
  strSomme = saisieField.getText ();
                 
  dblSomme = Double.parseDouble (strSomme);
  dblSommeTTC = dblSomme * 119,6 / 100.0;
   
  Trainer fmt = new Formatter();
   
  strSommeTTC = fmt.formatNumber(dblSommeTTC,2);
   
  RichTextField affichageField = new RichTextField ("sum TTC:" + strSommeTTC, Field.NON_FOCUSABLE);
  Add (affichageField);
  """"
   
  Only the small portion of code compiles fine but I get an exception when you run the program in the Simulator: javax.microedition.global.UnsupportedLocaleException

  I don't know if the Formatter class is the best way to convert a 45.528652541 to 45.53 number for example.

  Thanks for any help.

  Nice day.

  Marc

  I ended up writing a method to do this...

      final static String toString(double sum)
      {
          // Turn random double into a clean currency format (ie 2 decimal places)
          StringBuffer result;
  
          if (Math.abs(sum) < .01)
          {
              result = new StringBuffer("0.00");
          }
          else
          {
              if (sum > 0)
                  sum = sum + 0.005;
              else
                  sum = sum - 0.005;
              result = new StringBuffer(Double.toString(sum));
              final int point = result.toString().indexOf('.');
              if (point > 0)  // If has a decimal point, may need to clip off after 2 decimal places
              {
                  if (point < (result.length()-2))  // eg "3.1415"
                  {
                      result =  new StringBuffer(result.toString().substring(0,point+3));
                  }
              }
          }
          return result.toString();
      }
  

  I would like to know if there is a better way!

• Remove a white glow behind the text?

  I just installed Windows 7 today and it measures almost entirely to my taste, but I have a question; I don't know how to remove the glow behind the text on top of the different windows.

  What I'm talking about-
  http://imgur.com/0v10y.PNG
  (I apologize for the poor quality of image)

  It is not just the air very well, and I'd appreciate any help to remove.

  In my opinion, that if you can disable this feature (glow), you would not be able to read the text of title under certain circumstances.

• L2l VPN between ASA with the IP address public and CISCO2911 behind the ISP router with port forwarding

  Hi all

  My apologies if this is a trivial question, but I spent considerable time trying to search and had no luck.

  I encountered a problem trying to set up a temporary L2L VPN from a Subscriber with CISCO2911 sitting behind the router of the ISP of an ASA. ISP has informed that I can't ignore their device and complete the circuit Internet on the Cisco for a reason, so I'm stuck with it. The Setup is:

  company 10.1.17.1 - y.y.y.y - router Internet - z.z.z.z - ISP - LAN - 10.x.x.2 - XXX1 - ASA - 10.1.17.2 - CISCO2911 - 10.1.15.1 LAN

  where 10.x.x.x is a corporate LAN Beach private network, y.y.y.y is a public ip address assigned to the external interface of the ASA and the z.z.z.z is the public IP address of the ISP router.

  I have forwarded ports 500, 4500 and ESP on the ISP router for 10.1.17.2. The 2911 config attached below, what I can't understand is what peer IP address to configure on the SAA, because if I use z.z.z.z it will be a cause of incompatibility of identity 2911 identifies himself as 10.1.17.2...

  ! ^ ^ ^ ISAKMP (Phase 1) ^ ^ ^!
  crypto ISAKMP policy 5
  BA 3des
  md5 hash
  preshared authentication
  Group 2
  lifetime 28800
  isakmp encryption key * address no.-xauth y.y.y.y

  ! ^ ^ ^ IPSEC (Phase 2) ^ ^ ^!
  crymap extended IP access list
  IP 10.1.15.0 allow 0.0.0.255 10.0.0.0 0.255.255.255
  Crypto ipsec transform-set ESP-3DES-SHA 3rd-esp esp-sha-hmac
  card crypto 1 TUNNEL VPN ipsec-isakmp
  defined peer y.y.y.y
  game of transformation-ESP-3DES-SHA
  match the address crymap

  Gi0/2 interface
  card crypto VPN TUNNEL

  Hello

  debug output, it seems he's going on IPSEC States at the tunnel of final bud QM_IDLE's.

  What I noticed in your configuration of ASA box, it's that you're usig PFS but not on 2911 router.

  So I suggest:

  no card crypto OUTSIDE_map 4 don't set pfs <-- this="" will="" disable="" pfs="" on="" asa="">

  Then try tunnel initiate.

  Kind regards

  Jan