GC installation fails on the WHO with NodeManager Configuration step

I try to install OEM Grid Control and I'm having some trouble to make it past step in the installation of the Configuration of the WHO. I'm not very familiar with Oracle products. I finished all the configuration steps listed in the documentation, and in order to solve a problem earlier, I deleted the Keynectis and Telesec certificates since the cacerts file java keystore. NodeManager is run as a service, even if I think that the Setup process starts a new instance because it cannot connect to the service. I was also unable to connect to the service through the nmConnect WLST function, if it is possible my settings are incorrect. If the only problem is that GCDomain is not saved in the file nodemanager.domains, I'm not sure what I'm doing wrong, because I put it in the nodemanager.domains file located at C:\Oracle\Middleware\wlserver_10.3\common\nodemanager:

---
#Domains and directories created by the Configuration Wizard
#Fri 22 April 15:23:16 EDT 2011
wl_server=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\wl_server
MEDREC-Spring=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec-Spring
GCDomain = C\:\\Oracle\\gc_inst\\user_projects\\domains\\GCDomain
MEDREC=C\:\\Oracle\\Middleware\\wlserver_10.3\\samples\\domains\\medrec
---
Note: the file paths are correct and using escaped slashes, as appropriate, but this message board system turns the last double backslash in a line break. I can't find any html solution that works, so just take my word for it

I restarted NodeManager after making the change as well. Any help would be appreciated. Thank you.

Details:
Machine - Windows Server 2008 x 64
DB - 11 GR 2
WLS - 10.3.2
GC - 11.1.0.1

Install the Log:
...
FINE: Connection to the node Manager... April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA 'CN = AC KEYNECTIS ROOT, OU = ROOT, O is KEYNECTIS, C = EN ". Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 3, OU = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:19 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: April 22, 2011 21:23:19 CEST > < opinion > < security > < BEA-090898 > < without taking account of the approved CA ' CN = T-TeleSec GlobalRoot class 2, OR = T - Systems Trust Center, O = T - Systems Enterprise Services GmbH, C = OF. Loading certificate trust list triggered a certificate of analysis exception PKIX: OID not supported in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11. > April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: This Exception occurred at Fri Apr 22 15:23:20 EDT 2011. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: weblogic.nodemanager.NMConnectException: Connection refused: connect. Cannot connect to NodeManager. Check that they are running to win2008x64-2:7, 401. April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: java.net.PlainSocketImpl.socketConnect(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: java.net.SocksSocketImpl.connect(SocksSocketImpl.java:366) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: java.net.Socket.connect(Socket.java:525) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: weblogic.nodemanager.client.SSLClient.createSocket(SSLClient.java:38) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: weblogic.nodemanager.client.NMServerClient.connect(NMServerClient.java:227) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:199) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: weblogic.nodemanager.client.NMServerClient.checkConnected(NMServerClient.java:205) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: weblogic.nodemanager.client.NMServerClient.getVersion(NMServerClient.java:52) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: weblogic.management.scripting.NodeManagerService.verifyConnection(NodeManagerService.java:175) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: weblogic.management.scripting.NodeManagerService.nmConnect(NodeManagerService.java:168) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.core.PyReflectedFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.core.PyMethod.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.core.PyObject.invoke(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: to $3 org.python.pycode._pyx2.nmConnect (< iostream >: 118) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: to org.python.pycode._pyx2.call_function (< iostream >) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.core.PyObject.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: to org.python.pycode._pyx41.startNM$1(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py:20) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: to org.python.pycode._pyx41.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\start_server.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.core.PyFunction.__call__(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: to org.python.pycode._pyx39.f$0(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py:74) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: to org.python.pycode._pyx39.call_function(C:\Oracle\Middleware\oms11g\sysman\omsca\scripts\wls\create_em_infra.py) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: org.python.core.PyTableCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.core.PyCode.call(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.core.Py.runCode(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: org.python.util.PythonInterpreter.execfile(Unknown Source) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: weblogic.management.scripting.WLST.main(WLST.java:131) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: java.lang.reflect.Method.invoke(Method.java:597) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run.
FINE: in weblogic. Run WLST.main(WLST.java:29) April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader
FINE: Wed Apr 22 15:23:20 EDT 2011 Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: Node Manager down from this April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader works
FINE: Not connected to the Node Manager Apr 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: Launch NodeManager...
April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: Properties: {ListenAddress=win2008x64-2,ListenPort=7401,NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239,StartScriptEnabled=true,StartScriptName=startEMServer.cmd}.
April 22, 2011 15:23:20 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: Command: C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\bin\javaw.exe - classpath "C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\rt.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre\lib\i18n.jar; C:\Oracle\MIDDLE~1\patch_wls1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\patch_oepe1032\profiles\default\sys_manifest_classpath\weblogic_patch.jar; C:\Oracle\MIDDLE~1\JROCKI~1.5-3\lib\tools.jar; C:\Oracle\MIDDLE~1\utils\config\10.3\config-launch.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar; C:\Oracle\MIDDLE~1\modules\features\weblogic. Server.modules_10.3.2.0.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar; C:\Oracle\MIDDLE~1\modules\ORGAPA~1.0\lib\ant-all.jar; C:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1\lib\ant-contrib.jar; C:\Oracle\Middleware\oms11g\sysman\jlib\emConfig.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jrf_11.1.1\jrf-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.odl_11.1.1\ojdl2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dms_11.1.1\dms.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.dConfig-infra_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.fabriccommon_11.1.1\fabric-common.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xmlparserv2.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.xdk_11.1.0\xml.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-pmlib.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-policy-core.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-secpol.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.WSM.common_11.1.1\wsm-dependencies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. WSM.policies_11.1.1\wsm-Seed-Policies.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\orawsdl.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\mdds.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.webservices_11.1.1\ws_confmbeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\org.Apache.Commons.digester_1.7.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.bind_2.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax.activation_1.1.jar. C:\Oracle\MIDDLE~1\ORACLE~1\... \modules\javax. XML.stream_1.1.1.0.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.http_client_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxframework.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jmx_11.1.1\jmxspi.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.dconfigbeans_11.1.1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-base.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share.CA_11.1.1\adf-share-ca.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adflogginghandler.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\adfsharembean.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\commons-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\jsp-El-API.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle. ADF.share_11.1.1\oracle-El.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\auditwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\sslconfigwlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\oamap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\ossoiap_help.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\resources\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.auditprovider_11.1.1\jps-WLS-auditprovider.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-manifest.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-MBeans.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-upgrade.jar; C:\Oracle\MIDDLE~1\ORACLE~1\modules\oracle.jps_11.1.1\jps-patching.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\ADF-sh~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\lib\mdswlst.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\AUDITW~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jps-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\jrf-WLST.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAP_~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OAMAUT~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\ossoiap.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\OSSOIA~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\SSLCON~1.jar; C:\Oracle\MIDDLE~1\ORACLE~1\common\wlst\RESOUR~1\wsm-WLST.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbembedded57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar; C:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbtools57.jar"weblogic. NodeManager '-v '.
April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:21 > < INFO > < domains file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: INFO: loading areas file: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:21 > < WARNING > < domains file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains > 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:21 weblogic.nodemanager.server.NMServerConfig initDomainsMap 22 April 2011 15:23:21 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: WARNING: areas file not found: C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:22 > < INFO > < store loading identity keys: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true > 22 April 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:22 weblogic.nodemanager.server.SSLConfig loadKeyStoreConfig April 22, 2011 15:23:22 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: INFO: loading storage identity key: FileName=C:/Oracle/MIDDLE~1/WLSERV~1.3/server\lib\DemoIdentity.jks, Type = jks, PassPhraseUsed = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:23 > < WARNING > < folder properties for configuration manager node 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: WARNING: configuration properties manager node of the file 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' not found. Using the default settings. April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Saving configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.NMServer < init > 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: INFO: save the configuration properties node manager 'C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.properties' April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: node Manager v10.3 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: Configuration settings: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: NodeManagerHome=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: ListenAddress = win2008x64-2, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: ListenPort = 7401 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: ListenBacklog = 50 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: SecureListener = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: AuthenticationEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: NativeVersionEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: CrashRecoveryEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: JavaHome=C:\Oracle\MIDDLE~1\JROCKI~1.5-3\jre April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: StartScriptEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: StopScriptEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: StartScriptName = startEMServer.cmd April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: StopScriptName = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: LogFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.log April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: LogLevel = INFO April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: LogLimit = 0, April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: LogCount = 1 April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: LogAppend = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: LogToStderr = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: LogFormatter = weblogic.nodemanager.server.LogFormatter April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: DomainsFile=C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239\nodemanager.domains April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: DomainsFileEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: StateCheckInterval = 500 22 April 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: QuitEnabled = true April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: Interface = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: NetMask = April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: UseMACBroadcast = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: DomainRegistrationEnabled = false April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: mappings of domain names: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:23 > < INFO > < Secure socket listener started on 7 401, host WIN2008x64-2/192.168.182.135 port > April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:23 weblogic.nodemanager.server.SSLListener run April 22, 2011 15:23:23 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: INFO: Secure socket listener started on port 7 401, host WIN2008x64-2/192.168.182.135 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: Successfully launched the Node Manager. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: The Node Manager process runs independent of the WLST process. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: Exit WLST won't stop the Node Manager process. Please see April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: to the Node Manager records for more information. April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: Node Manager logs will be under C:\Oracle\MIDDLE~1\WLSERV~1.3\common\emnodemanager20110422152239 April 22, 2011 15:23:30 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: Connection to the node Manager... April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: April 22, 2011 15:23:41 > < WARNING > < directory domain read when Configuration Error > April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: weblogic.nodemanager.common.ConfigException: the field 'GCDomain' to 'C:\Oracle\gc_inst\user_projects\domains\GCDomain' was not saved in the file nodemanager.domains and dynamic domain registration is not supported. Please register the domain in the file nodemanager.domains. April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: to weblogic.nodemanager.server.NMServer.getDomainManager(NMServer.java:257) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleDomain(Handler.java:224) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: to weblogic.nodemanager.server.Handler.handleCommand(Handler.java:108) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: to weblogic.nodemanager.server.Handler.run(Handler.java:70) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
FINE: NMProcess: at java.lang.Thread.run(Thread.java:619) April 22, 2011 15:23:41 oracle.sysman.omsca.util.ProcessOutputReader run
...

Vijay,

Your correct. Even with regard to the OEMGC 10 g Oracle still doesn't have a Windows 64 bit for OEMGC 11 g version.
It sometimes means that are all companies except 1, the GC server 64-bit Windows servers.

Eric

Tags: Enterprise Manager

Similar Questions

  • LyncVDI.exe installation fails on the t610 with WES7

    I tried to install LyncVDI.EXE on a t610 with WES7.

    I have looged on administrator, disabled the filter entry and I just got a message "installation failed."

    Any hint to someone?

    You must ensure that your TEMP folders are not z:\temp.

    z:\Temp is a based RAMdrive folder and the RAMdrive is 32 MB by default.

    You can use a temporary folder on C: (for example, c:\temp), a network of road; a USB key.

    You can temporarily change the folder temp with the following commands in a Command. The EXE window:

    If not exist c:\temp\nul mkdir c:\temp

    Set temp = c:\temp

    the value of the tmp = c:\temp

    [PathToLyncvdi] \lyncvdi.exe

    If you want to use something other than c:\temp, change the commands accordingly.

    [PathToLyncVDI] should be replaced with its actual path.

    Tell me if it worked for you

  • The iOS to iPhone 4S 9.3 installation fails during the audit with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected.

    Greetings, Installation of iOS 9.3 to my iPhone 4S (model MD234X/A with iOS 9.2.1 (13D15)) fails when checking with the message "...". iOS 9.3 failure of verification because you are no longer connected to the Internet"even if the phone is connected. as I can browse with Safari ok. I tried "Retry" several times, has waited several hours and "Try again" and turned the phone off and then on again then "Retry", all with the same problem! Help, please?

    Hi Bloggsj,

    Thank you for using communities Support from Apple.

    I see that you get an installation error when installing iOS 9.3 OTA.  I suggest that you try following the steps below to download the latest version of the update:

    If you have downloaded iOS 9.3, but you can not install it, you will need to download the update again. First of all, remove the update of your device:

    1. Go to settings > general > storage & use of iCloud. Under storage, click on storage management.
    2. Find iOS 9.3 in the list of applications.
    3. Press on iOS 9.3, then remove the update.

    Now you can go to settings > general > software update and download the latest iOS update.

    If you can't put day to iOS 9.3 on your iPhone 5s or earlier, iPad Air or an earlier version, or iPod touch

    Take care.

  • Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks.

    Hello. I purchased a CS2 product and im having problems with activation. I have the key but my installation failed in the 'summary '. Please help thanks. This is what im seeing.

    Screen Shot 2016-03-01 at 9.09.51 PM.png

    See my response in audition 3 error with installation

  • Deeper debugging on the "deployment operation failed on the agent with an error...".

    I tried to deploy a very simple plugin, a couple of settings with Snmp Fetchlet. Nothing complex.

    ILINT pass (although I'm not specifying a file of target.xml as examples and models do not seem to correspond to what expected the DTD), here is the result:
    -bash-3, 00 #... /emctl ilint d 0-i sysman/emd/no_targets.xml m sysman/admin/metadata/my_storage.xml - c sysman/admin/default_collection/my_storage.xml
    Oracle Enterprise Manager 10g Release 10.2.0.1.0
    Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
    Not analysis Instance file target (targets.xml)
    Validate the Collection target sysman/admin/default_collection/my_storage.xml file
    Validating target metadata file sysman/admin/metadata/my_storage.xml...
    Target the sysman/admin/metadata/my_storage.xml successfully validated metadata file

    The plug-in is imported into Oracle EM GM 10 5 correctly.

    When I try to deploy, I get an 'error '. I go to the screen deployment errors and warnings and that's:
    Deployment operation failed on the agent with an error state

    Where can I find some sort of journal or information more deeply in the error state?

    Paul

    The preferred credentials you set for the agent where you try deploy it, are the same identifying information for the user who owns this agent install? During the deployment, files that are placed on the agent receive the same permissions and owner as install other files on the agent.

  • The message says the inconsistency in the data base of the installer and the installation fails. The summary of errors not display any errors. How to install LR?

    Message on the notification window "Inconsistency in the database of the installation program"and the installation fails. The summary of errors not display any errors. How LR to install?

    HI Pauld48784098,

    It will help us solve your problem if you can provide additional information. What version of Lightroom are you trying to install and what is your OS?

    In the meantime, this discussion forum, in which a user has experienced a similar problem, can help: "Inconsistency in the database of the installation program".

    Best,

    Del

  • Conversion of physical Windows 7 machine fails during the reconfiguration with converter.fault.FileCreationFault

    Hello

    first of all, thank you for providing tools such as vCenter Converter for free.

    I tried to convert a physical machine to Windows 7 using the current vCenter Converter Standalone (version = 4.3.0 build = build-292238). The target of the conversion is an external USB disk. I am to convert the entire machine, including a disc of about 280 GB in size.

    The conversion takes more than 24 hours, but seems to work quite well. Right after training is converted (to about 98% of the whole process), the conversion fails during the reconfiguration with the following error message:

    Unexpected exception: converter.fault.FileCreationFault

    -ERROR - convert: converter.fault.FileCreationFault

    {(converter.fault.FileCreationFault)

    dynamicType = < unset >

    faultCause = (vmodl. NULL in MethodFault),

    file ="
    .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$ «»

    MSG = ""

    }

    There is no other message log of the recent in the converter - server.log. The converter - worker.log says:

    from reconfiguring the system...

    using temp dir C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig

    ReconfigurationTransaction: cached reviews system volume

    LocalPathToGuestSystemFolder:
    .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\

    LocalUndoFolder:
    .\vstor2-mntapi10-shared-468030AD0004C435020000000A000000\Windows\$reconfig$

    Cannot create undo file

    Cleaning up the C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\sysReconfig temp directory...

    TaskImpl failed with MethodFault::Exception: converter.fault.FileCreationFault

    Task failed:

    Scheduled timer cancelled, succeeds StopKeepAlive

    Completed task: Task 3

    InternalTask2VmomiTaskAdapter updates, States: 4, percentage: 0, xfer rate (Bps): < unknown >

    Creation of vmx file Analyzer

    BaseParserImpl::Parse Config info is not cached

    F:\VM\wartberg\wartberg.vmx analysis

    NIC has no info support, unable to determine connectionType

    NIC has no info support, unable to determine connectionType

    NIC has no info support, unable to determine connectionType

    NIC has no info support, unable to determine connectionType

    NIC has no info support, unable to determine connectionType

    NIC has no info support, unable to determine connectionType

    Registry hive
    . \vstor2-mntapi10-shared-468030AD0004C435020000000C000000
    Boot\BCD is responsible under the name mntApi397493888030118019

    Error 13 read the value of the element of key mntApi397493888030118019\Objects\ {9dea862c-5cdd-4e70-acc1-f32b344d4795} \Elements\24000001

    MntApi397493888030118019 hive unloaded

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi398445489630118019

    2 error reading value CSDVersion key mntApi398445489630118019\Microsoft\Windows NT\CurrentVersion

    2 error reading information SP

    CurrentType key is multiprocessor free

    2 error reading CurrentType mntApi398445489630118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

    2 error reading 64 bits of information, probably not a 64-bit system

    the product name is Windows 7 Home Premium

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi404763500730118019

    Error reading the mntApi404763500730118019\ControlSet001\Services\vmxnet - 2.

    Error 2 vmxnet information, assuming that vmxnet is not installed

    MntApi404763500730118019 hive unloaded

    MntApi398445489630118019 hive unloaded

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi406994304730118019

    MntApi406994304730118019 hive unloaded

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE is charged under the name mntApi419224726130118019

    2 error reading value CSDVersion key mntApi419224726130118019\Microsoft\Windows NT\CurrentVersion

    2 error reading information SP

    CurrentType key is multiprocessor free

    2 error reading CurrentType mntApi419224726130118019\Wow6432Node\Microsoft\Windows NT\CurrentVersion key value

    2 error reading 64 bits of information, probably not a 64-bit system

    the product name is Windows 7 Home Premium

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi425417937030118019

    Error reading the mntApi425417937030118019\ControlSet001\Services\vmxnet - 2.

    Error 2 vmxnet information, assuming that vmxnet is not installed

    MntApi425417937030118019 hive unloaded

    MntApi419224726130118019 hive unloaded

    Registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SYSTEM is charged under the name mntApi427773541230118019

    MntApi427773541230118019 hive unloaded

    Failed to get the volume mount points 640 (03 = * 00 > 7000000000000: 4146 (type = 2, code = 259))

    VMOUNT library: 1450 error communication error with the pilot while

    Error 1016 (hive to load error: unknown error 1016 (0x3f8) (1016)) temporary hive loading
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE under the name of the mntApi367215230118020 key.

    Unable to load the registry hive
    .\vstor2-mntapi10-shared-468030AD0004C435020000000C000000\Windows\system32\config\SOFTWARE, error 0x3f8.

    Error 16258 when you open the software hive

    Failed to get the volume mount points 640 (03 = * 5320000000:00404, 16258 (type = 2, code = 1016))

    MNTAPI Info OS: Microsoft Windows 7 Home Premium edition: root of home: Windows Service Pack: worm 0: 6.1

    OS resides on the disk partition 2 F:\VM\wartberg\wartberg.vmdk path

    BaseComputerImpl::Open configuration file: F:\VM\wartberg\wartberg.vmx

    WorkerConvertTask: production bundle task agent for task with id = 'task 3 '.

    bundle of newspaper http://Converter.Agent.DiagnosticManagerImpl[task-3] Generating task.

    http://Converter.agent.DiagnosticManagerImpl creation bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

    http://Converter.agent.DiagnosticManagerImpl adjusted bundle of newspaper "task-3 - qfyxaphl.zip ' and size '11155" CRC "1600250029."

    WorkerConvertTask: recovery agent special newspaper bundle to "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip".

    http://Converter.agent.DiagnosticManagerImpl recovery bundle of newspaper with key ' task-3 - qfyxaphl.zip "at offset = '0' and max size ="11155.

    WorkerConvertTask: Bundle successfully retrieved from "C:\Windows\TEMP\vmware-temp\vmware-SYSTEM\agentTask-task-3-geckipbm.zip"

    Task failed:

    Scheduled timer cancelled, succeeds StopKeepAlive

    Completed task: task-1

    bundle of newspaper http://Converter.Worker.DiagnosticManagerImpl[task 1] Generating task.

    As the conversion took more than 24 hours, I would be happy to learn how to avoid this problem or even how to save the VM already created (I don't know if this is possible, but at least the virtual machine appears to be underway, but then crashes saying that a required device is not present).

    Any help is appreciated!

    Thank you

    nepper

    OK - I'll upload versions changed in maybe 15 minutes

    muss weg kurz

    _________________________

    VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

  • New installation fails during the expansion of the files Windows 7 Pro

    Recently, I built a new computer after my old man died. I installed Windows 7 Pro, I had on the old system. Everything worked well for about a month. Then I started having various errors, some suggesting a memory error. I ran several times using the most comprehensive parameters of memtest and no problem not found. Further inspection, I discovered that a critical system update was applied just before that the problems started. I decided to roll back the change. It does not solve the problem. I tried to do a system repair. That did not work. She only had basic as IE11 and Skype applications. I had also installed the utilities for the motherboard and graphics card. So, I decided to do a clean install. Each time, it fails during the expansion of the files. The error message is, "Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. "Error code: 0 x 80070570." He gets up to 30% each time. I tried to install for a V300 Kingston SSD (120GB). I also tried another SATA II HDD (750 GB) with the same problems. I downloaded a new ISO and tried to install from that. Yet once, it is not at the same point. I noticed that whenever it creates a partition system reserved 100 MB which is almost full. At one point, I got a message saying that there are about 8 000 MB of free space. (I think that was all trying to manually unzip the files by a tip I found online). I found several suggestions for similar problems, but the solutions proposed did not help. I'm sure it will be a simple solution, but I'm out of ideas. Any help would be appreciated.

    Motherboard: MSI MPower Max
    CPU: Intel i7 - 4770 K 3.5 GHz (not overclocked)
    RAM: Crucial Ballistix Sport 16G (2x8G) DDR3 - 1600 MHz
    SSD: Kingston SSDNow V300 Series 120 GB (no special driver needed)
    HARD drive: Seagate 750 G 7200 RPM SATA II
    Video: EVGA GeForce GT 2 640 GB
    Case: Corsair 400R
    Power supply: Corsair TX650M
    CPU cooler: H80i
    DVD: HP, BluRay BD R/W drive
    OS: Windows 7 Professional 64-bit upgrade (the old computer was an XP update)
    CPU Temp is around 42 C.

    If Memtest86 fails then you need to get into the BIOS and set the RAM timing.  Memtest86 + displays the calendar then use the value displayed and compare to the real specs for your memory.  Also, you may need to increase the voltage to the RAM (in BIOS) place a small amount.

    As regards the function of Intel EIST, let her enabled for now. Then enable it after installing Windows successfully.

    =============================================================

    It's the set of test utilities that I use on every new system that I'm building.

    Note: If you are OverClocking or use an automatic overclocking or BIOS power saving features, start by disabling: Intel EIST, Turbo Mode, Cool and pretty and fall back to the speed of stock as a starting point.

    Disconnect any other (additional) internal hard drives and external USB devices.
    Look for any loose hard drive power or cables SATA, graphics card or other power cables.

    First run Memtest86 +:
    It runs from a floppy disk or CD and should eliminate or confirm if one or more of your memory
    sticks are bad or the values of the SPD in the BIOS are correct.
    Let it run for as long as you can: 2,4,6,8 or several hours (at least 3 full passes), so no errors at that time then your ram is OK.
    http://www.memtest.org/
    Memtest86 + Guide/How To (use the.) ISO to create a bootable CD)
    http://www.overclockers.com/forums/showthread.php?t=409152

    Hard drive test:
    If you do not know your readers of the brand and model, try "Speccy",.
    It provides information from the computer/system in detail:
    OS, CPU, RAM, motherboard, graphics, Hard Drive, optical, Audio, peripherals, network.
    Note: Option RAM indicates number of slots, DRAM Timing.
    Works your memory speed (frequency). The nominal frequency of your memory.
    http://www.Piriform.com/Speccy

    Test your player - create a Bootable CD:
    Ranging from 5 to 25% (depending on the make and model) new hard disks are defective.
    Note: Reliability of HDD sank medium over the past 18 months.

    Test your drive with the car manufacture utility.
    If you have a new hard drive Seagate the very next thing would be to download Seagate Seatools
    (bootable CD) and check bad sectors.
    SeaTools for information: http://www.seagate.com/support/downloads/seatools/
    SeaTools for Windows download: http://www.seagate.com/support/internal-hard-drives/enterprise-hard-drives/saturn/seatools-win-master/
    SeaTools for DOS download:
    http://www.Seagate.com/support/internal-hard-drives/consumer-electronics/LD25-series/SeaTools-DOS-master/

    For Western Digital readers to download the .iso from WdDiag file: http://support.wdc.com/product/download.asp?groupid=611&sid=30&lang=en

    Samsung Estool: http://www.samsung.com/global/business/hdd/support/utilities/ES_Tool.html
    Samsung Disk Manager software: http://www.samsung.com/Products/HardDiskDrive/utilities/shdiag.htm

    Hitachi Drive Fitness Test Software: http://www.hgst.com/hdd/support/download.htm#DFT
    Diagnostic tool available for use by customers who believe that having a brand Toshiba Fujitsu hard drive:
    http://SDD.Toshiba.com/main.aspx?path=ServicesandSupport/WarrantySupport/SoftwareUtilities

    Notice of suport Fujitsu disk utility: http://www.fujitsu.com/us/services/computing/storage/hdd/

    Toshiba CD bootable: (BACK Diagnostic Tool version 7.0 for IDE/ATA/SATA hard disks)
    http://SDD.Toshiba.com/main.aspx?path=ServicesSupport/FujitsuDrivesUSandCanada/SoftwareUtilities#diagnostic

    ============================ SSD Test Software =============================

    Intel® drive SSD Toolbox
    https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=18455

    Life of the SSD: http://ssd-life.com/

    OCZ Toolbox: http://ocz.com/consumer/download/firmware

    SanDisk SSD Toolkit: http://kb.sandisk.com/app/answers/detail/a_id/9328/

    = Once Windows installed =.

    Device drivers: have you installed latest drivers from device of the manufacture of the motherboard?
    Check their support site for the latest drivers as the CD that came with the computer
    or motherboard may be older and less stable drivers.

    Visit the download of the manufacture of the graphics card:
    Download and install the most recent Windows 7 or 8 drivers for your card.
    ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
    NVIDIA: http://www.nvidia.com/Download/index.aspx?lang=en-us

    See also the test of 'Smoke box' Nvidia or other demos: http://www.nvidia.com/object/cool_stuff.html#/demos
    or equivalent ATI.

    Prime 95:
    http://www.Mersenne.org/freesoft/
    It's a stand alone .exe file contained in an archive .zip.
    Simply choose to run the 'stress test' option for 8 hours or more.
    If your PC can pass this test, your memory and CPU
    are very good (close the housing cover in order to maintain adequate ventilation)

    Core Temp:
    The temperature of each core of the processor.
    Note: For the overclockers using stock radiator and cooling fan Intel/AMD you can expect
    a range of 35 to 40 at idle and 60 to 65 C max temperature when running Prime95.
    http://www.alcpu.com/CoreTemp/

    CPU-ID (CPUZ): http://www.cpuid.com/cpuz.php
    Watch the clock speed of the CPU under various conditions of loading
    (when using speed step technology Intel EIST).
    #1 Note:
    CPU - ID has two tabs - tab 'Memory' that shows the actual speed of the memory
    and the "SPD" tab shows the nominal speeds for each memory location that is filled.
    #2 Note:
    COMPARE the two values, the actual speed of the memory must not exceed the rated speed of your memory.

    CPUID HWMonitor: Hardware program that reads the sensors of health main PC monitoring systems.
    voltages, temperatures, fans speed.
    http://www.CPUID.com/HWMonitor.php

    Test of Stress of FurMark GPU (graphics card):
    http://www.oZone3D.NET/benchmarks/fur/

    Pass marks burn in test: http://www.passmark.com/
    Burnin test, and their test bench at the same time give a good workout from all the major parts of Windows.

    HD Tune:
    Provides information of the car and has an option (tab scan error) to test your drive.
    http://www.hdtune.com/

    CrystalDiskInfo:
    http://CrystalMark.info/software/index-e.html
    User Manual: http://crystalmark.info/software/CrystalDiskInfo/manual-en/
    Monitoring the State of health and the temperature. Solid State Drives brackets (value of the software).

    SpeedFan:
    Monitors internal temperatures and has a function of analysis health online (SMART tab) for hard disks drive.
    It displays your drives model number and compares your drive with other discs of the same brand and model.
    Note: Unfortunately now includes a lot of bloatware, be very careful when installing remove bloatware.
    http://www.almico.com/SpeedFan.php

    GPU - Z:
    A utility light, designed for you give information about your video card and GPU.
    http://www.techpowerup.com/GPUZ/

    PC WIZARD:
    A powerful utility designed especially for detection of hardware, also analyses more.
    He is able to identify a large scale of system components and supports the latest technologies
    and standards.
    http://www.CPUID.com/pcwizard.php

    J W Stuart: http://www.pagestart.com

  • BT Stack installation fails during the installation of device driver - Satellite R830 Windows 7

    I have a Toshiba Satellite Pro R830 x 64 with Windows 7.

    Recently, I downloaded new Bluetooth drivers from the Toshiba website support for this laptop and tried to install.
    The Bluetooth software is installed but the driver (RFBUS) installation fails with the message "Bluetooth RFBUS driver was not installed successfully".

    I don't understand how the Toshiba Setup program cannot recognize Toshiba hardware.
    As a user deaf that I used successfully the function of Bluetooth with my hearing aids to make Skype calls, now whole Bluetooth function is completely non-functional because of failure battery BT driver install.

    I tried to uninstall and reinstall several times but still get the same message

    Help, what do I do to fix this?

    File downloaded to install the site Web of Toshiba's v80012_T20110809_x64 as dated 18/08/2011 11.53

    Hello

    A question: could you please post you completely portable model number?
    I'm not quite sure of this model laptop but most of the portable m press a combo of WLan/BT card. This means that a single module shares WiFi and BT connectivity.

    In this case its need to install an additional driver like BT filter driver package, but this depends on the module that is installed in the unit.

    However, I m wondering why try you to install/upgrade to update this BT stack if it worked correctly in the past

  • Adobe DC installation fails after the most recent Windows and Mac updated

    During the installation of package (Adobe Creative Cloud) process stops, and then comes back.  Installation seems to be failing when the version check.  Tried the package and install separate;  No compatibility not test Adobe CC cleaning tool are able to correct the problem. Compatibility mode installs all applications except Adobe DC.

    Resolved for Windows 10.  Suite cannot be installed using MSI, instructions included with the configuration application require it be used.  Unable to solve the problem with the iMac OS 10.11

  • Configuration of the WHO with cert of third party for SLB

    Hello!

    We replace our third-party certificates for OEM and we bought the cert Entrust to our security group.

    Even read literature that oracle has provided can be a little difficult.

    We were told in the RS to create a new portfolio, which we did with the new certificates, but the documentation says to import the cert of the PES in the trust store of SGD and the Agent (1481192.1) that the cert must be in base64 format in a text file.

    1. How is - this (export the cert SLB in base 64 format)?

    2. the cert should be in the wallet in order to provide WHO with the base64 text file or is just necessary on the server where is SGD?

    3 - is a necessary portfolio or can we just use a keystore of Java to ensure the cert?

    4. What is the best documentation for this process? I see a TON of documentation that seems to go around itself and can be a bit confusing.

    Thank you in advance for your help!

    Let me understand what you want to do first because it seems to me that you are now quite confused after reading the oracle documentation.

    You just want to replace the SLB certificate used by the WHO, because you have a load balancer for which you have received a new certificate?

    So all you have to do is to import this certificate into the SGD?

    1. your PES cert so probably already in base-64 format. It is a text file and starts with a - CERTIFICATE - START? If this isn't the case, you can use openssl to convert.

    2. the format base64 certificate just need to be on the server starting from which you run the command emcli to and accessible by the user who executes the command

    3. emcli command will import the cert in the portfolio appropriate/keystore

    4. don't know, too much confusion autour docs

  • Installation failed in the MAO "Admin privileges".

    Hello

    I'm under 27 "iMac, mid 2011, OSX 10.8.3. When I try to install Photoshop, I am prompted to enter my Admin password. The password is accepted, but MAO told me that the installation failed because "administrator privileges are required for installation." One account on the Mac and it's the admin. A set the download for "Anywhere" permissions in the security and privacy preferences panel. Have firewall set to "automatically allow signed software to receive incoming connections. I'm puzzled.

    EDIT * uninstalling and reinstalling MAO seems to have solved the problem. My setting listed above have not changed. Thank you *.

    Sanani64 says: * uninstalling and reinstalling MAO seems to have solved the problem. My setting listed above have not changed. Thank you *.

  • installation failed for hearing CC with windows 10. Is this normal?

    I just tried to load Audition on my new laptop and it has failed. Anyone who has a good reason for it? Thank you.

    Hey karena

    you have to see a minimum system requirements?

    System requirements | Adobe Audition

  • LJ P1606dn-installation failed on the new laptop with window MS 8.1

    installation attempt failed after about 10 min - no error code or the provided text - any known fix?

    Thank you

    Jerends

    With the help of the cd supplied with the printer, no sign of the option "uninstall."  Driver and downloaded full features LJ software. When "run", were successes, including test print.

    Muchimas gracias!

  • The installation failed because the Windows Installer is underway

    I try to install Gmail voice and video chat on my HPTouchsmart and get this error "failed to install because Windows Setup is in progress. Please wait for installers to complete, close all Windows Installer... "But I do not want to install anything else.  Anyone know how to fix this?  I had time to settle down before, but can't remember how I got around it (I remember it was a chore).

    No, no process of Setup running, it's the annoying part.  It is apparently a known issue with Vista.  The solution below is annoying, but came from HP and the only one that I know that works:

Maybe you are looking for