installation failed for hearing CC with windows 10. Is this normal?

Similar Questions

• I lost the disc to restore my phone and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  I lost my laptop computer restore disc and it is no longer supported by the manufacturer. Can I use the installation disc for my desktop with my laptop serial number?

  My title says it all. I have an old HP laptop that they do not send to restore the disc more (I don't know yet I had one; his old laptop from my brother) and I have an installation disc for my new PC. I have a Windows XP Home edition SP2 installation disc. However, as the hard drive of my laptop broke down, I don't know what version of windows it was. I think it should have been an OEM version and the sticker says it was Windows XP Home Edition.

  Now, anyway I tried to install my installation on laptop computer disc, offering series of laptop computer but now it asks me to activate. Will it work if I activate it?

  Thank you

  Unless you are lucky enough to know someone who has a generic OEM drive, which you can borrow, I don't see a practical solution for you.  I advise you to spend the money to buy one, even if you could find one to buy from a reliable source (not eBay!).  Although a generic OEM disc should work with your product key, there is no guarantee that it will work with your product key.

  If your laptop can be retrieved through a restore partition, and you can't borrow a disc that will work with your product key, then you have pretty much exhausted all reasonable or practical options.

  I finally did! I borrowed a copy of a generic OEM drive, through activation and it is!

  Thank you much for the help...

  Now I've done could you help me more? Say now, I returned the drive OEM back (don't want to make an illegal copy) and want to be able to use my current system installed to generate a system disk that will allow me to avoid all the problems I've had up to now. What would you recommend? I've read a few articles on other forums (I did some research!) but is a little confusing. I hope you could help.

  Thank you

  @Carey Frisch - positive Get... you want to help here not only your view of what I would do with my money!

• I get an installation failed for photoshop, illustrator and caused - payload: package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}---ERREUR: third party useful Installer revealed

  I get an installation failed for photoshop, illustrator and caused - payload: package redistributable Microsoft Visual C++ 2012 (x 64) 11.0.61030.0 {3E272A93-C06B-4206-AD02-0EBE02535E20}---ERREUR: third payload Installer vcredist_x64.exe failed with exit code: ERROR-2147024546: cannot install the Microsoft Visual C++ 2012 Redistributable Package (x 64). Please try to install by double-clicking the executable file to "C:\Users\randy\AppData\Local\Temp\{2246675D-5215-4CA7-BE30-569ED38C5D9B}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com

  Go to control panel > programs > program and features.

  under programs and features, look for the option "Microsoft Visual C++ Redistributable Package (x 64) 2012" and do a right click on it and uninstall it.

  If you are prompted, restart, and then uninstall.

  Once you had uninstalled package redistributable Microsoft Visual C++ 2012 (x 64).

  Click on the link below and the new download Package redistributable Microsoft Visual C++ 2012 (x 64) (vcredist (x 64) .exe file and install the same):

  http://download.Microsoft.com/download/1/6/B/16B06F60-3B20-4FF2-B699-5E9B7962F9AE/VSU_4/VC redist_x64.exe

  Once you had installed successfully Vcredist_x64.exe, desktop application Cloud Creative throw and try to install the CC apps.

  Let me know if you need more assistance.

• I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

  I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

  Hello WillieBouma1,

  You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• installation of phoshop cc stucks at 91% for like 3-4 hours. Is this normal?

  Hi all, I am currently installs the cc of photoshop but it stucks at 91% for like 3-4 hours. Is this normal? How should I proceed? Appreciate your help and comments

  If its still stuck on 91% please restart creative cloud and launch the installation.

  With the log files, you can see troubleshooting installation issues. CS5, CS5.5, CS6

• I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

  I tried to erase and reset my iphone 6 s. But why is it taking so long? For more than 24 hours. Is this normal? The phone displays just the apple logo and wont open. Help, please. Thank you in advance.

  Hello

  Follow the instructions here:

  If you are unable to update or restore your iPhone, iPad or iPod touch - Apple supports

• Installation Failed for HP Laserjet 1200 Series in the new computer laptop with Windows 8, 64-bit

  Name of the product - HP Laserjet 1200 Series PCL 6 Driver

  Operating system: Windows 8 Home Edition, 64-bit

  Error message: cannot find the series 1200 on the network. To locate manually click ok...

  Changes Made - this is an installation on the new laptop, in Windows 8, 64-bit

  Description:

  1 installation of an existing network, consistedof a desk and two wireless laptops.

  2. the two portable computers have Windows 7, 64 bit. Above the named printer is accessed successfully for laptops.

  3 replaces one of cell phones with 8 64-bit Windows.

  4. the path of the 1200 series is: wireless printer to the router, router to the desktop via ethernet, from desktop to a printer via a cable.

  5. the configuration of the wireless printer is

  Name: HP Laserjet 1200 Series PCL 5

  Port: \\Central\HPLaserj

  Printer: HP Laserjet 1200 Series PCL 5

  Driver: HPMCPM25. GPD 5.8.2008

  Problem

  Impossible to re-create this path with Windows 8, 64-bit configuration.

  a. when I try to download a driver always end up with a file called UPD-pcl6 - x 64 - 5.6.0.14430

  This seems to be a universal PCL 6 printer driver, can successfully decompress the file and create a folder

  b. during installation, I can see the desktop ICON printer (name: \\central\HPLaserj); So far so good

  c. process is unable to locate a driver and ordered to locate manually.

  d. accessing the HP Universal Driver files fails because a driver is not found.

  e. caraa attempt enter fails because you can't enter address above (\\central\HPlaserj). Cannot enter HPLaserj for the address, which obviously does not work.

  f. when the installation showed a list of drivers, the only one that I found was a universal PCL 6, which is what I thought, I tried to download the original.

  This set up has worked successfully to Windows 7 64 bit. It seems that I need help much more expertise to guide me through this whole upward.

  Problem solved.

  This link gives a good overview of the solution

  http://www.sadjad.net/blog/2012/11/28/Windows-8-shared-printer-driver/

• Photosmart Premium C410: C410 Software Installation fails for not having not supported USB, Win7 Pro

  I just got a laptop HP ProBook G3 450 with Windows 7 Pro 64 bit. I'm unable to install the Photosmart C410 series software and it fails when checking the system requirements, saying the USB hardware and necessary drivers are not present.  I tried with and without a USB cable installed and also tried to disable the security firewall. It fails for the same when USB problem only connected via WiFi. The discoveries of software troubleshooting HP Print and Scan doctor that the software is not fully installed, for example, without help.  I can connect to the printer and print a test page using my WiFi network using a web browser, and I managed to install it on two other portable Win7 in the past.

  Hello
  Click the Start button and type folder in the search bar, then open the Temp folder indicated.
  
  Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
  Open the installation folder.
  Find the file usbready.exe and rename it to usbready.old.exe
  Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.
  
  Now follow the installation and check for the difference.
  
  Kind regards
  Shlomi

• LyncVDI.exe installation fails on the t610 with WES7

  I tried to install LyncVDI.EXE on a t610 with WES7.

  I have looged on administrator, disabled the filter entry and I just got a message "installation failed."

  Any hint to someone?

  You must ensure that your TEMP folders are not z:\temp.

  z:\Temp is a based RAMdrive folder and the RAMdrive is 32 MB by default.

  You can use a temporary folder on C: (for example, c:\temp), a network of road; a USB key.

  You can temporarily change the folder temp with the following commands in a Command. The EXE window:

  If not exist c:\temp\nul mkdir c:\temp

  Set temp = c:\temp

  the value of the tmp = c:\temp

  [PathToLyncvdi] \lyncvdi.exe

  If you want to use something other than c:\temp, change the commands accordingly.

  [PathToLyncVDI] should be replaced with its actual path.

  Tell me if it worked for you

• Vista SP2 Installation fails (error 800706BE Code) via Windows Update

  I am running Windows Vista Business (32-bit) SP1 and I noticed that Vista SP2 is available for download by manually checking in Windows Update last night.  After having seen that it is a large download (more), I started the download, left my PC and left the House.  When I got home, my screensaver was away and when I attamped my password to disable the screen saver and see where I was in the process of updating, my password did not work.  Then I did a hard reboot but then could not connect under my admin user account.  I've then logged in as my wife (standard user - no password) and went to Windows Update where I noticed that the SP2 for Vista Installation fails (error 800706BE Code).  I spent most of last night and all today so far tried to solve this problem.  There are several problems here... When I click on "Install" in Windows Update, I get a message of "is not necessary: 1 update" (even when I look in the installed updates it says that the update failed).  If it is not necessary, then why is it listed as an important update that must be installed?  Endless loop... In addition, I'm not a password reset for my connection because I have a password saved on a flash drive.  Then I tried using all the older passwords that I remembered and none worked.  Shift caps lock was not on either.  I've logged in as my wife, went to the Microsoft Download page and eventually find the link to download the standalone version of SP2 Vsita, but after downloading the massive file, I didn't have the right to install it because I can not connect as an adminstator!

  (sigh) Can someone please help with this?  Thank you

  Naveen,

  Thank you very much for your suggestions!  Your suggestion of restarting, press F8 and choose "repair your computer" worked.  I was able to do a system restore and I chose a date where my old password was still in use (I had just been invited to change a few days before I tried to download Vista SP2).  In addition to losing my cookies and automatically complete IE8 - everything is back to normal.  I have not yet tried a 2nd try to SP2, and I'm very hesitant to do it now!

  Thank you once again!

• Windows 8 corrupted installation TrueCrypt encrypted another disk with Windows XP

  Hello, I need help. I just installed new Windows 8 on an empty partition of the secondary drive.

  The first drive I got the previous installation of Windows (XP). Unfortunately, I forgot, this hard drive is encrypted TrueCrypt. Windows 8 now works OK, but the disc with Windows XP seems to be empty. The other partition of the disk with Windows 8 works fine.

  I have the TrueCrypt rescue disk and he managed to restore the TrueCrypt Boot, but when I try to start, he writes, that no bootable partition was found. It allows us to decipher the drive and when I start it, it seems to work, but it is too slow and I need to know if this can help. Try to restore a Volume of TrueCrypt header in Windows 8 fails ("way of wrong installation, wrong password or not a TrueCrypt Volume"). Pourrait installing Windows 8 format the drive?

  (Sorry for my bad English)

  Later: I tried data recovery, and it shows some files and folders http://postimg.org/image/9xt33kmw5/

  Hi Daniel,.

  The drive that contains Windows XP displays empty because the file format of Windows XP is FAT (File allocation table) that is not supported by Windows 8. Windows 8 uses NTFS (New Technology File System). I would say to contact TrueCrypt support to check why the description of disk takes a long time. In Windows 8 If you want to encrypt or decrypt the data, you can use bit-locker installation. I suggest you to see the following links for more information on encryption of bit-locker.

  http://Windows.Microsoft.com/en-in/Windows-8/BitLocker#1TC=T1
  http://Windows.Microsoft.com/en-in/Windows-8/using-BitLocker-Drive-encryption
  http://Windows.Microsoft.com/en-in/Windows-8/unlock-BitLocker-protected-drive
  http://Windows.Microsoft.com/en-in/Windows-8/BitLocker-recovery-keys-FAQ

• installation failed for cc, error code: 1 - tried all laptop troubleshooting, new and previously installed before doing a system restore...

  So I'm running a new laptop with 64-bit Windows 8.1.

  I installed creative cloud when I arrived to the laptop and it was fine, no problem!

  I then had to perform a restore of the system because some automatic updates, which caused problems.   Now when I try to install again creative cloud, it downloads and then the second, he starts to try to install, I get the installation failed, error code: 1 message.

  I have tried all troubleshooting, which is to run the Adobe CC cleaning tool, restart the system, download CC, run as administrator, same error code: 1 message.

  I am also running as user administrator so nothing to do with it.

  I have no idea which continues to cause this, have tried everything suggested without success, and the must frustrating, is that once he has actually worked!  My laptop is completely up-to-date with all windows, events, recommended, and optional updates.

  Please can someone help me?

  I really appreciate your answer fast to my query and please don't take this the wrong way, however I stated clearly my opening message that the solutions proposed in the link you sent me in case of problems did not and yet you have sent to me in any case what is frustrating, as I hoped I had taken the time to explain what I had already tried without success as clearly as possible.  Your suggestion to search the forums for other solutions was my last course of action before coming to my last resort to put the request here for expert advice.  I understand that many folk do not do this on the forums so I don't understand your direction here but unfortunately in my case it didn't there no alternative solutions to my problem in the forum.

  Fortunately after hitting my head on the wall for the last 4 hours, I managed to find the solution for me and I want to share it for the sake of others who may be in the same position.

  The problem revolves around turning off the obligation to enter a password when you turn on the computer and enter windows 8.1.  Even if you are still an administrator and car windows of the signs that you, this seems at odds with the Adobe Creative Cloud installation process.

  To remedy the situation:

  Hold the Windows key and press R.

  Type NETPLWIZ and press ok/return.

  Click on the check box besides "users must enter a user name and password to use this computer" to ensure that a tick is visible.

  Now when your restart the computer, you will need to enter your password before windows starts.  Download Adobe CC and install.  Problem solved.

  For what it's worth, I did use the cleaning tool Adobe CC as well before the restart and install but I doubt that this is necessary (and certainly did not help at all until I have reactivated the password on windows starts).

  I'm sure it's just windows being usually a pain and not really for lack of Adobe, but it must be said that I had no such problems with other software downloads and installations to date.

  I hope that is a valuable feedback to Adobe and will help them avoid an unnecessary barrier to new customers who buy their products.  I must admit, I was near you are looking for software elsewhere.

• Is it possible to build a project with Labview 2010 on a Windows XP system, which is useful for a system with windows 7 on it?

  Hello

  I intend to use Labview 2010 in no time.

  But before I go to use it I have a few questions.

  1. I know that it is possible to run Labview 2010 in an XP environment. But is it also possible, when running Labview 2010 on an XP system, to build a project for a version that is useful in a Windows 7 environment?
  2. Or should I run Labview 2010, when I want to build a project that is useful on a Windows 7 system, on a system with Windows 7?

  Please give me some information.

  I hope to hear from you soon.

  Kind regards

  Kenny

  the file (.exe) is also compatible with xp and seven, no need to change anything...

  Concerning

• Driver for kit compatible with windows wireless printing upgrade 7

  I just upgraded to windows 7 and I can't find a driver to install for my kit to upgrade to wireless printing.  Does anyone know if it is created?  I just bought the kit last year and I wouldn't go back to bring my laptop to the floor whenever I need to print.

  Hi @ll,

  I just created a work around to install the driver correctly on a Windows 7 computer, did these steps on two machines and it works perfectly.

  Just follow the following steps. Unfortunately I can't attach files here that I had created an Office document with screenshots to make it easier to follow. If you want that the document, please send me a note to send you it.

  In order to install the HP Wireless Printing Upgrade Kit Windows 7 follow these steps.

  1. download and install the HP Wireless Printing Upgrade software/base drivers (bought with the Windows Vista operating system computer)

  2. when installation reached 90 percent on the bar top and 10% to the bar downstairs it crashes.

  3. don't panic.

  4. right mouse click on the task bar and start the Task Manager.

  5. Select the wireless printing upgrade kit in the Applications tab and right mouse click and select go to process.

  6. stop the process called Setupwizard.exe

  7. you will get a pop up, indicating that the program probably was not properly installed and that you have two choices to select in what follows: Reinstall with the recommended settings and this program is correctly installed.

  8. choose to reinstall the program and Windows 7 appears the application for leave.

  9. after leaving, the installation files will be extracted again.

  10. you will see the Welcome screen once again.

  11. click on install, select I accept, Next.

  12. He'll find your adapter printer showing the connected device.

  13. click Next and the installation continues.

  14 at the end of the installation an HTML page is launched, saying: you need to install the printer software before you can use your printer.

  15. once all right mouse click on the connection in the task bar Manager, select Connect and Plug and Play will install the printer driver as if the printer is connected directly to the PC.

  If the P & P does not find the driver, or strike not in you can try with Windows Update, if the driver is there, it will be installed, otherwise use the CD, you might have.

  16 start, for example, Microsoft Office Word 2007 and to send a print job in the drop-down menu, you can select the printer that was installed.

  17 scanning also works that I used Microsoft Office Document Imaging to scan from the PSC 2210.

• Installation of PrintMaster Platinum 17 with Windows 7 worm, nothing happens

  The program cd is recognized by my computer but nothing happens - no installation occurs.  suggestions?  I have a 32-bit operating system.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Try running in compatibility mode. Right click on the program icon, click on solve compatibility problems, wait while the problem is detected. Click the troubleshooting program > select an appropriate version of Windows the program is known to run in, as Mike pointed out, try Windows Vista SP2 > start the program to see if it runs. If she runs, click next to proceed to save the settings for it. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP