General approach to the addition of new attributes

Similar Questions

• Deliver the addition of new set of switches stacked as an extension to the network in another data center building

  Hello

  I was wondering if someone can help me, I am a humble sysadmin with no real network admin training.

  I have the following Setup to work in a rack in our data center.

  2 x Dell Sonicwall NSA2400
  2 x stacked switches Dell Powerconnect N5524

  A Sonicwall is connected to each switch (active-passive)

  Every Dell server has 2 x nics in servile failover mode, one of each network card connected to each switch

  This is done to allow a full redundancy for network, cable, switches and Firewall interface cards. It works well.

  The above mentioned rack is now full and we ordered a new rack that is in a different datacenter of construction on the same site. We decided to buy another set of stacked switches and _extend_ (no battery) these via optical SPF on the rack on the other.

  The idea is that we still have the switch fault tolerance but link to two grids through 10 GB. The new switches are 2 x Dell Powerconnect N2048 and have been implemented stacked with any connected devices.

  I have implemented SPF ports on both switches to be a junction ports and connected the two sets of switches, unfortunately our site went offline, our alert went ballistic and no servers could not talk to each other!

  Quickly, I unplugged the new switches and after a worrisome 10 alerts deleted seconds and the site is back online.

  I don't know why this has happened and reflected on the STP parameters that my googleing seem well. I don't know I'm missing something basic.

  I'll post a framework and a diagram in a follow-up post

  Which is no doubt tree covering the shot weight. It is a good idea to assign lower priority to the main switch. Generally, your root switch will be the one that plugs into the firewall. Definition of priority on the main switch to 4096, it will make the root switch. So as you work your way through different layers of the network, increase the priority. Access layer switches can be left by default.

  I would also check the physical connections for loops. In situations where you have multiple connections switch, make sure that these ports are configured in a SHIFT.

  Keep us informed.

• Change after the addition of custom attribute

  Hello

  I use OIM R2 PS1 and the commissioning of OUD user via the connector.

  Depending on the condition, I added a new custom attribute "HomePhone". However, the value of attribute for this attribute is only pushed for the newly created user. For a user (prior to adding the custom attribute), the attribute values runs not more than on the side of the OUD.

  Is there a planner that I need to run?

  Thank you, John

  Hello

  I'm sure that you have not finished the second part of the extension of connector - "Configurations to achieve synchronization app downstream." However, you mentioned that you don't see a problem with the new user, however if you update the value of the attribute, it does not flow down to OUD, as older users.

  Please go through the link: extend the functionality of the connector

  The steps would be - creating new tasks within the definition of processes, mapping, etc..

  Thank you.

• Disable the addition of * new * miniatures

  Currently, the thumbnails are disabled on the page of thumbnails. Very cool.

  But Firefox continues to add new links on the page of thumbnails. Not cool.

  How can I keep the current set of links on the page of thumbnails, not to allow new links, but keep the page of thumbnails available?

  No, this is not possible.
  Firefox displays some the most visited sites in the tiles on the subject: newtab page, so if the calculated frecency value changes so the tiles will be updated accordingly.
  If you want the tiles remain the same, and then click the button pinned onto the tile.

  • https://en.Wikipedia.org/wiki/Frecency

• Help with the addition of new section (extension) to the report

  Hello:

  I need to check my VCs and collecting information on their versions and ESXi versions and version numbers under them.  I wrote a script (see below) that does exactly what I need, but only for 1 (one) VC.

  I can't understand how to add additional venture capital of the report information and make sounds too good I have to one.

  Ideally, I want to use Import-Csv and import all my name of VCs from the file.

  
  

  Any help would be really appreciated.

  Thank you!

  
  

  Here is my script:

  Se connect-VIServer "vcenter1"

  Get-data center | `

  Tri-objet -propriété nom | `

  ForEach-Object { }

      $Datacenter = $_

      $Report =  "" | Select-Object VC_Name, $vmhost, VC_Version and cluster_name Host_Version

        $Report . VC_Name = $defaultVIServer. Name.Split ('.' ) )[0]

        $Report . VC_Version = $defaultVIServer.version + '_' + $defaultVIServer.build

        $Report

      $Datacenter | `

          Get-Cluster | `

        Sort-Object -Property Name | `

  ForEach-Object { }

          $Cluster = $_       

          $Report =  "" | Select-Object VC_Name, $vmhost, VC_Version and cluster_name Host_Version

          $Report . Cluster_name = $Cluster. Name

          $Report

              $Cluster | `

            Get-VMHost | `

  Tri-objet -propriété nom | `

  ForEach-Object { }

              $VMHost = $_

              $Report =  "" | Select-Object VC_Name, $vmhost, VC_Version and cluster_name Host_Version

              $Report . VMHost = $VMHost. Name . Split ('.' )[0]

                    $Report . Host_Version = $VMHost. version + "_" + $VMHost. build

                    $Report

  }

  }

  } | Export-Csv -Path C:\Users\test.csv NoTypeInformation - -UseCulture

  Try like this

  $report = @)

  Cvnames.csv Import-Csv - UseCulture | %{

  SE connect-VIServer $_. VCName

  $row = "" | Select-Object VC_Name, cluster_name, VMHost, VC_Version, Host_Version

  $row. VC_Name = $defaultVIServer.Name.Split('.') [0]

  $row. VC_Version = $defaultVIServer.version + '_' + $defaultVIServer.build

  $report += $row

  foreach ($datacenter in (Get-Data Center |)) Sort - Object - property name)) {}

  foreach ($cluster in (Get-Cluster-location $datacenter |)) Sort - Object - property name)) {}

  $row = "" | Select-Object VC_Name, cluster_name, VMHost, VC_Version, Host_Version

  $row. Cluster_name = $Cluster.Name

  $report += $row

  foreach ($vmhost in (Get-VMHost-location $cluster |)) Sort - Object - property name)) {}

  $row. VMHost = $VMHost.Name.Split('.') [0]

  $row. Host_Version = $VMHost.version + '_' + $VMHost.build

  $report += $row

  }

  }

  }

  Disconnect-VIServer-Server $_. VCName-confirm: $false

  }

  $report | Export-Csv-path C:\Users\test.csv - NoTypeInformation - UseCulture

• Crash of project files after the addition of new parameters for a plugin effect

  Hello

  That I was developing an effect, I built projects to test things out.  Now, however, I have added a new parameter to an effect, and when I open the projects that contain the same effect of the older generation, I get the following three error messages:

  1. after effects WARNING: conversion of command necessary indeed effect "Test Plugin".  Some effect options will be reset.  To avoid silently reset these same effect controsl on all subsequently loaded project, save the project and exit & re-run After Effects. (0: 25)

  2. after effects error: missing data in the file. (4: 33)

  3. after effects WARNING: your project file is apparently damaged (jumps to sections: 3). Please save under a different name.  (0: 26)

  Why this happens, and what I can do, if anything, to prevent this problem from happening.

  Thank you for your time and help!

  Arie-

  what you need to do is to make sure that the params of the older version are

  get the exact DISK_ID even in params_setup, as they did in the old

  Version.

  new params must get a new DISK_ID. Note that the DISK_ID order

  NOTHING to do with the order of param.

  If a parameter in the old version had DISK_ID = 3, and was the 3rd in the user interface, and

  in the new version, it is in the #5 index, it should still get DISK_ID 3.

  who said AE to associate a workflow of data backed up with some param. the

  Error You ' r get is when a recorded stream "slider" lands on a "checkbox.

  Param in the new version. (just an example, you get the picture)

• I can't power on a virtual machine (with linked disks) after the addition of new hosts of Lab Manager

  ENVIRONMENT

  -Lab Manager 3 using VC 3.5

  -Initially the 2 hosts in a cluster and managed by LM

  -Added new cluster with 2 new hosts in VC

  -Two bunches pointing to the same NFS storage

  PROBLEM

  -When you try to turn on a computer in new cluster, I get a "requested file" "not found" error

  RESULTS

  -This seems to happen only when creating a virtual machine that has virtual disks of parent; most of our VMS is linked clones

  -When you look at the log file, please see attachment, we found the following:

  It is the location of the new virtual machine in the new host:

  /vmfs/volumes/fabdf38d-beff047d/LMW2K3/2909/002909-T_XP_SP3_32b.VMDK

  When you look at the hard, it points to the parent disk, but it seems that it does not:

  /vmfs/volumes/6586c772-53eee1bb/LMW2K3/2904/002904-T_XP_SP3_32b.VMDK

  Please note th volumen IDS are different and can not get the disc parent of the new machine.

  SOLUTIONS?

  Thank you

  Jose

  You should immediately stop using the new hosts otherwise creating new virtual machines can spoil the vmdk channels. Try http://kb.vmware.com/kb/1005930.

• addChild is the addition of new child but get rid of the existing children (if it is the same object)

  I have a chart of the letters from A to Z.

  I add the child to the scene with a discreet button represents the letter of the alphabet.

  I can add different letters to step up to 4 letters (I have a condition 'if', limiting the number of children on the stage).  But if I try to add 4 of the SAME letter, added the first, the second is added and removed from the first, the third is added and removed from the second (and the first has already been removed) and so on.  So I can never have the same letters as if I want to spell out MMMM as the expression of a feeling.

  How can this be?  I think I used a similar method before in a previous prototype where new children were loading on the scene from an image file on the disk.  In this case, all the children are integrated MovieClips in the FLA file (the FLA is huge!... because I have about 10 types of lettering images for each letter of the alphabet).  And I'm calling those with class constructors and pushing Classes in an array and then call this table a for loop iterating from 0 to less than 27 with i being a uint.

  Any help is greatly appreciated.

  -markerline

  :

  initialize

  var wordDisplayA:Array = [];

  var btnA:Array = [btn_A, btn_B],

  for (var i: int = 0; i<>

  btnA [i] .addEventListener (MouseEvent.CLICK, letterDisplayF);

  }

  use wordDisplayA to remove objects in the scene and null them.

  can change but do not change significantly

  function letterDisplayF(e:MouseEvent):void {}

  var C: Class = Class (getDefinitionByName ("Alpha_01_" + e.currentTarget.name.split ("btn_") [1] .toUpp erCase()));

  var instance: MovieClip = new C();

  addChild (instance);

  wordDisplayA.push (instance);

  instance.x = instance. Width * wordDisplayA.Length;

  }

  Call when you want to remove the letters.

  function removeWordF (): void {}

  for (var i: int = wordDisplayA.length - 1; i > = 0; i--) {}

  removeChild (wordDisplayA [i]);

  }

  wordDisplayA.length = 0;

  }

• The addition of new widgets in the library of Muse

  Hello

  I would use multiple widgets of the Muse Gallery for my sites.

  http://Muse.Adobe.com/Widget-Manager

  I downloaded, but how to I incorporate into the site? I just want different photo and video galleries.

  I thought I should add new widgets in the library of Muse, but I don't know how to do this.

  How one does a Widget of Muse, which does not exist in the pre-filled library?

  Thank you

  Muse, you cannot add widgets personalized to the library at the moment. To use a widget, you have downloaded you must open the .muse, select the widget and copy/paste to your project. Then you can modify it according to your needs.

  Francesco

• General approach to the implementation of several dictionaries of color name?

  My interactive color wheel applet [url http://r0k.us/graphics/SIHwheel.html] currently has a single class providing for more than 1500 color names and hexadecimal values. I am considering multiple supply of these "dictionaries names of colors" (CNDs) - the current set, Munsell colors Sherwin Williams colors, etc... Each item in the Dictionary consists of a hexadecimal string of the value of the color and a name string. There are at least 3 approaches that might be possible:
  
  (1) store each NDT in its own file of plain text with names ending in common extension, for example ".PSF". At runtime, hunt for .PSF files in the current directory and build a GUI selection list dynamically. This would probably be my approach in other languages and would save space in the jar file. (One byte per character instead of two). But I don't even know if a cmdlet can read files in its own .jar file. If it is possible, they would be in the current directory, right?
  
  (2) store each NDT in its own class. Is there a way to simply drag the classes in a project and the parent java automatically recognize what NDT classes it there and adjust the graphical user interface to support / them?
  
  (3) store NSDC all in one class, as 2D arrays separated. It could end up as a huge (class in progress, with just a dictionary, is 78 k in size), but could be the simplest to implement.
  
  Which path would you take? Is there a better way that I didn't think?

  If you already use getResource() and you do not place random CND files around the file system, there is no reason to mix FileInputStreams it.

  Class.getResourceAsStream () is the way to support different types of loads. It supports even seen your program a jar file or a jar unpacked file. You leave there useless catch block you need to remove.

• Change of file system after the addition of new technologies using the scope of technology

  Hello
  
  I checked - in my project Jdeveloper in ADE. I guard, check-in, all of my new project files in ADE. Now, I've added two more/component technology (ADF Web Application Support Library, ADF business components) using my project (Project Properties-> scope of technology). What file I need to change/add in my project in ADE?
  
  Thank you
  Vishal

  I checked - in my project Jdeveloper in ADE. I guard, check-in, all of my new project files in ADE.

  The question would be true for any source control system.
  What to checkin/merger of views is jpr file in your project.
  All entries in your 'field of application of technology' are maintained...

  In JDeveloper, you can just right-click on the name of your project-> releases-> consignment/validation

  Published by: Jang Vijay Singh on October 29, 2009 14:47

• I tried to sync my ipod with my iTunes after the addition of new music, but when I tried it could not synchronize?

  the error is '1156' apparently 'others' files is full and not audio files that I check to see if they took up a lot of memory, but they don't I also dumped more music that I added but still didn't work I also checked the calendar, SMS, apps, and other programmers like that but nothing happened and the 'other' bar still takes most of the capacity on my iTunes when it does not still took half of what my audio did before I tried the sync. Does anyone have any suggestions.

  Hello

  I suggest you to refer to the articles and check if it helps.

  iTunes: synchronization of multimedia content for iPod and iOS devices

  http://support.Apple.com/kb/HT1351

  iTunes: iTunes Store advanced troubleshooting

  http://support.Apple.com/kb/TS3297

  If the problem persists, I suggest you to contact the Apple Support for assistance on this issue.

  Apple Support communities:

  https://discussions.Apple.com/community/iPhone/accessories?view=discussions

  I hope that helps!

• Delay between the addition of peripheral support and to be visible?

  I added a device supported in the portal provider. When I disconnect and reconnect and check, it is there in the list of devices selected for this version. However, it does not appear in the list of devices if I check in the App World. Is there a delay between the addition of new devices and them being visible/allowed to download? How long is it? Or is there something else I need to do to add new devices supported for existing versions?

  I believe that the original deadline for metadata changes is nominally a day, while there may be further delays (up to a week?) so the App World client is caching information. I don't think that there is a good description of what exactly is subject either of these delays, but it's a good bet that you will see at least one. These are probably not involved if you view App World via a web browser.

• OID provisioning with IOM and the addition of a custom multivalue attribute

  Hello - I have a class of the custom object that contains an attribute with multiple values (e.g. mymultiattribute1). I wish that this attribute was available on the form of OID process on the UD_OID_USR main form or child form UD_OID_RL. The idea is to have IOM admin add values or update the value of this attribute for example during the OID commissioning of the admin user account IOM should be able to add value1 and the value 2 to this attribute (similar to the role of the OID connector assignment feature). Since this is a multivalued attribute, so I think it must be a form of child? Correct me if I'm wrong.
  
  Guys please can you me how to configure IOM to achieve? Now that we do not have the cycles to customize the connector (i.e. coding), so we are looking to set up the system of the IOM or use existing functionality of OOTB, maybe configure feature role assignment for our objectclass and attribute in the IOM is the option?
  
  Thank you
  
  Additional information on the functionality of role OID which might be useful for your answers :-)
  
  The table Lookup.OID.Configuration contains the following three parameters which I believe are associated with roles.
  
  ldapRoleDNprefirx = cn
  ldapRolememberAttr = roleOccupant
  ldapRoleObjectClass = organizationalRole
  
  The table AttrName.Role.Prov.Map.OID contains the following parameters:
  
  Role name = cn

  You will need to follow adding attributes to new for commissioning multiple values before you start on to update for Provisioning new multivalued attributes

• I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How can I solve th

  I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How I can solve this problem.

  Hi abgolf3,

  The question may be how the new hard drive has been formatted.  Take a look at the way in which the reader is implemented by clicking Start > Control Panel > Administrative Tools > double-click on computer management > double-click storage.  Is all the space on the disk are responsible?  If so, take a look at these two documents for your problem:

  Mark a partition as active

  Format a hard drive or partition to NTFS format

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.