General question about a message displayed on the top of the fillets.

Similar Questions

• General question about the updates and version number

  I have a general question about versions and update.  I'm new on this and am in the deep end of learning I want.

  In vSphere web client, I see the following versions (these are exactly as the seller, he left a few months that I have screenshots in my documentation that match)

  Version - VMware ESXi, 5.1.0 1612806

  Profile - Dell (updated) ESXi - 5.1 - 799733 (A00)

  I am trying to familiarize themselves with the Update Manager and I noticed that there are a lot of patches and updates available.

  Lists of Update Manager 5 patches as "Missing" with Red x but directly above them are a list of patches with green tick indicating that "installed" - it is perhaps obvious, but im guessing 'installed' means really installed when displayed on the screen - there is an update installed, labeled "ESXI 5.1 all the update 2-' would be able to tell that it has been installed by the details of profile/version above?

  I don't think it's a big deal at this stage, but if I install all missing patches and then the details of the version/profile change in summary screen?

  I hope this makes sense.

  Thank you

  This article allows to correlate the updated version: products VMware correlating build numbers to update levels (1014508)

• General questions about errors in eventvwr

  Greetings.

  I have a general question about some failed modules are stored in the Windows Event Viewer.

  An error leading to the crashes some applications that I've seen several times now when supporting computer problems is something like this:
  (Windows error reporting) Fault bucket, Type 0, name of the event: PCA2, (...) P1: application.exe, (...)

  I wonder what this 'PCA2. Which is a kind of module Windows handles tasks such as allocating memory or smth. Like this? What could be the cause of these errors (physical memory problems / corrupt swap file / insufficient rights?)

  Same Question for the application falls down because of "kernelbase.dll" as in:
  (Application error) Failing application: application.exe, Version: 0.0.0.0, (...) Failed module: KERNELBASE.dll, Version: 6.1.7601.18015, (...) Path of the failing module: C:\Windows\syswow64\KERNELBASE.dll (...)

  What is the .dll file and what could possibly cause kernelbase.dll Fault?

  The application can be a bit buggy, but I wonder what could possibly cause these accidents and if there is a way to fix these problems - or what dev did wrong.

  The two errors occur mainly on x 64 systems - especially Windows 7/vista

  Kind regards

  With application errors, the application is called everything first and the module he collaborated with is named second. Normally you should try to reinstall the application if you see not to repeat the mistakes. If this does not work, you go to the forum on the application to see if other users see the same error. There may be a bug in the application.

  The observer of the Application event log contains Information reports (event ID: 1001) for errors where the details were sent to Microsoft for review. You will find that there are corresponding to the event ID: 1000 reports errors, either in the system or Application logs. These reports are also included in the center of the Action. Center type action in the area of research above the Start button and press ENTER. Click on the arrow pointing downwards to the right of Maintenance, and then click view reliability history. The errors reported are the Red orbs with a white cross. You can search for solutions to problems, but occasionally you get a significant response from Microsoft.

  I can't tell you what it means PCA2. Google did not find a significant result. The reports themselves are not unintelligible, although I have never tried to understand the meaning of a particular report. I have extracted what, in my view, is a starting point of two reports:
  Event name: PCA2 = P1: motherboard_utility_onoffchargesetup.exe P2: 4.65.0.0

  Event name: PCA2 = P1: setup.exe P2: 11.0.0.28844

  You have the app in the boredom and the version of the file. These details have been extracted a file of information system to a computer with a card mother Gigabyte. So, you see I have a starting point, if I wanted to determine the cause of a failure.

  I will say before you go dive deep into each event ID: 1001 report that many are not easy to even begin to understand. However, they can provide useful clues.

  KERNELBASE.dll is likely to be the module with which the application works. You need to focus on the application.  KERNELBASE is probably preceded by P3 or P4 in the report?

  General remarks on the event viewer:
  http://www.gerryscomputertips.co.UK/syserrors5.htm

• General question about the Browser element

  Will look for an alternative, I found the Browser element and now I have a few questions about that:

  As I am not yet experienced on the Interfaces of Java development, I was wondering if following senario is possible:

  Have some HTML Pages which do the job of the Interface.

  If you submit a form, the JAva Base program (the Master application) process all Information.

  If you are viewing a list, the info is from a json of the Base program output.

  As the Communication Server Client HTML, the only difference is, that all communications remains inside the app.

  Is this possible?

  I can't speak to the idea of dealing with the entry of html, but I can confirm that it is possible for an application program to create a html page and providing the BrowserField for display.

• How I replace perfectly my record excel sheet with ability of database? + General questions about computing distributed with LabVIEW

  Surprisingly, I'm almost finished with a full blown control-simulation application, that I've been working on for more than a year now, thanks in no small part of this community. The final step is to run on the simulations of k ~ 8 and be able to meet a simulation and overall statistics on performance. Each simulation is taking about 6 minutes of real time to run (~ 2 seconds of real time per hour of simulation time, valid for 7 days of simulation), as we seek to about 800 hours of your time to simulate. I have 5 computers available and a raspberry 2 Pi these simulations on, I'm looking to set up a kind of compute cluster at the end in about 2 weeks.

  The ability of current logging is sketchy; I got about 40 columns of data, and they are written in a spreadsheet with a .xls format tabs-delimited. This works very well for individual simulations, but it would be quite heavy to deal with if I had more than 20,000 of them. I think this must be done with a relational database sort, but my experience with databases is very limited, especially then, when it comes to LabVIEW. Here are my questions:

  -Can I create a kind of master-slave configuration where a computer (and probably the Pi) keeps track of the simulations are complete, which are running, and who have never run? Computers slaves ask for simulation settings, and IP would give them to him.

  -How should I take care of the database? Each simulation is about 500 k in .xls format, it's about 5 GB of data in all. Computers slaves synchronization from time to time to take care of the redundancy?

  -How can I refine my memory + General fresh disk I/O? How can I know which items from my point of view most of them?

  -Do you have suggestions for the implementation of clusters of databases relational/computer with LabVIEW?

  I have attached a picture of my configuration of logging + the overall structure of the application. It is a state machine with a structure of the event for the interruptions.

  
  

• Questions about reinstalling Windows XP after the end of Support

  Several members of the family of my friends that I sometimes provide technical assistance for are still under XP SP3 on their systems.  These systems are too outdated and underpowered to upgrade to a newer version of Windows, and it will probably be some time until they are able to upgrade to a more recent hardware capable of running most modern versions of Windows.

  If in the meantime, something happens to one of their computers requiring a reinstall of Windows after support for XP purposes, but before they can get a newer computer, I have a few questions about what will happen:

  1. Is there still a way to activate their existing copies of XP during installation process?
  2. While I understand that new patches, updates, patches & will be is no longer provided, existing patches will be available through the Microsoft Update service so that I would be able to get those computers to update state that they would be about to XP supported ends, or do I have to search elsewhere to try & find these updates?  (It would be nice if Microsoft put up a cumulative update that would be sort of a mega-patch for people in this situation to be able to get back to the most current state systems, but I would not be surprised if there wasn't such a thing).

  Anyone know the answers to these questions?

  Thank you

  You should be able to clean install and activate Windows XP.  You should be able to upgrade as well, even if the wise move would be to get the updates stored on portable media or integrated into a multimedia installation (or both) as soon as POSSIBLE if the plan is to continue using Windows XP for a while.

  My suggestion is to set up and to buy Windows 7 Professional renovated systems / lease from places like TigerDirect.com - as pricing is generally about the same as just a license for Windows 7 or a little professional, the hardware specifications of these machines are likely machines Windows XP current in use, using something like the PC Mover take care of Laplink and Microsoft to move files (or for the more than 25 USD the) applications that can be moved as well) to the new system of the former is possible, and Windows 7 will get updated until 2020.

  Recently research I've seen systems to Windows 7 Professional for as little as 150 USD with 4 GB of memory and dual core processors.  Not bad.

• Questions about close cache events and the defeat strategy "ALL".

  I use near cache, and try to determine what defeat strategy would be better for me. My cards before being highly volatile, I'm considering strongly using the strategy of "EVERYTHING" for at least some of my caches.
  
  This brings me some questions about the event cache stream closely when the strategy using ALL:
  
  (1) should I expect an event to be published from the back cover when an element is added? (i.e. putAll() called cache before)
  (2) should I expect an event to be published from the back cover when an item is deleted? (i.e. remove() called cache before)
  (3) should I expect an event to be published from the back cover when an element is expelled from the rear because of size constraints?
  (4) should I expect an event to appear from the back cover when an element is expelled from the rear due to the expiry?

  Hi Tom,

  near cache before cards do not store the entries inserted in the back cover, so if you have saved a listener on the front plane, you will get the notification to the listener on the plan before all the inserts in the back cover of other nodes.

  It's a little different for entries that have been asked by the local node through the near cache (not directly on the distributed back cache). If the cache almost didn't get call so far, then they will not go into the front plane, so it's the same as if inserted directly into the back cover. It is the starting of the near cache behavior. After the first EEG puts will be cached in the front plane. Once that puts is cached in the front plane, then the listener before card will see put through the cache close to the same node, but not of other nodes.

  Also, the cache near registers a listener lite, so it becomes not the input values changed, as the keys.

  A listener that you entered on the back cover will see each insertion, if you do not save a MapEventFilter or a MapEventTransformer custom with the listener. A MapEventFilter can filter inserts away (I think, the cache similar to that, too).

  Best regards

  Robert

• Question about AP Autoinvoice and macthing the invoice?

  "Hi Forum - I have a question about accounts payable" * pay on reception Autoinvoice * "program.
  
  The question: Does autoinvoice program match invoices against PO, or do I need this to do it manually after running this program?
  
  
  Thanks in advance!

  Hello

  You have not need manually match invoices to the BP.

  The standard functionality of the remuneration to the receive function is as mentioned below:

  You can set up your vendors to pay upon receipt or delivery, and you can choose the level of consolidation of bills: paid site of landslide, a reception or packaging provider.

  After receipt or delivery operations are created, you can submit reception AutoInvoice compensation program to automatically import the invoices corresponding to the corresponding purchase orders.

  When the Payables open Interface import process is complete, you can then validate and pay these bills to order using the processing of payments of accounts payable standard feature.

  I hope this helps.

  Thanks and greetings
  Jeanny.

• General questions about the iphone compatible hearing aids, please?

  I am a seller of oil field that moves and I need my first hearing aids.  I have loss of hearing with a classic old guy and it's average but I'm late for h / a. I'm missing an important part of my life and want to hear the birds sing again!  I currently use a 5 s with 9.2 and a bluetooth Plantronics traveler legend.  I have hands free for safe driving and especially for taking notes of value and wear it all day.  I don't listen to music or videos, no vehicle bluetooth and any other iOS device.  The goal is good h/a and the use of good phone.

  I am interested in the Halo of Starkey and research scared me a bit of the questions that I barely understand!  Googling found a lot of comments, but they seem to all written by agents of sale or competitors.

  Where is the microphone bluetooth on the Halos?

  Is the call phone stereo or mono?

  The function of the hearing aid remains so that on the phone?

  In light of my basic needs, all warnings other than the stupid of these things cost?

  I am also considering a 6s, this would be a better phone for the Halo team?

  Prone glitch or awkward iphone apps?

  I'm bored of conversation in the meeting rooms, restaurants are tough and shows are terrible for the hearing?

  Generally you are happy with new h/a and halos in particular.

  Everything is provided with a newbie would not recognize that you like?

  Let me know if you need more details.

  Where is the microphone bluetooth on the Halos?

  --> The microphone's upstairs behind the part of the ear. If you use the Halos as your ears "on the phone", you still talk in the phone's microphone.

  Is the call phone stereo or mono?

  --> Is not true stereo, but you will hear the call through two hearing aids.

  The function of the hearing aid remains so that on the phone?

  --> You can leave the active hearing aid microphones or cut them. It's your choice.

  In light of my basic needs, all warnings other than the stupid of these things cost?

  --> Feel free to test-drive a few models, unless the first really works well for you.,.

  I am also considering a 6s, this would be a better phone for the Halo team?

  -->, I can't comment on that, except to say that my experience with multiple iPhones over the years that I have great confidence that each new model is better than the previous. There are a few bumps on the road, but Apple is good enough, solve them. YMMV

  Prone glitch or awkward iphone apps?

  --> Not, in my opinion.

  I'm bored of conversation in the meeting rooms, restaurants are tough and shows are terrible for the hearing?

  --> Which has not changed for me. It is the nature of sound amplification without being able to directly select that sounds to amplify and to mute.

  Generally you are happy with new h/a and halos in particular.

  -->, I am very happy.

  Everything is provided with a newbie would not recognize that you like?

  --> I like the ability to define a 'from' sensitive geographically, where you can control the volume up down and the bass/treble back. It is a crude tool, but it works.

• General question about the csa

  Hello

  The CSA coverage buffer overflows with all applications?

  Thank you

  Lisa G

  Hi Lisa,

  AFAIK CSA see all buffer overflows if you have an active State and you do not have an exception for an application.

  I have messages from buffer overflow of a bunch of applications and made exceptions for about 40.

  HTH

  Tom

• General question about the themes...

  Good day to all... A few Questions on the themes and my options for my app:

  Im running 4.2.4 on XE currently... and Im using the 25 responsive Blue theme...

  Some of my users are commenting that the application takes a bit of screen estate leaving less room for the actual data. They also comment that it's a bit boring!   (and for reference, they also use applications created using DevExpress by another development team... (https://demos.devexpress.com/RWA/SalesViewer/RevenueBySector.aspx) for an example...

  So, I'm looking for options theme... If I look at the standard themes, I have 4 themes style HTML5 (23-26), which all use a lot of screen space (probably because they are designed with tablets in mind)...  But if I want to use a smaller style then Im left with just two styles a bit smaller (21 and 22). Who are both very close and very grey and bland... (let's call it company)...

  I have also to search the Web and found very few themes available... There are a few sites, but nothing spectacular...  So on my questions:

  Ive been told I should not use the existing themes, as are day a non-compliant with new browsers. However, some are very nice, and it's a shame, that they should not be used...

  Did someone knows if they will become in the future, is it possible to migrate the? What are the implications of the use of one of the old legacy themes?

  Version 5 will implement some new themes?

  Are at - it somewhere that Ive missed all good themes 'out there'... ?

  What other ways are there to customize the new themes... (and Im not a Web Designer and not a CSS expert either)?  Is there a generic method of simple method to change the topics without hours exploring CSS... (for example by changing the general theme to a more obvious color..) My thought is around 5 or six changes their that change the appearance / colors/style throughout the entire application etc...

  Any other ideas or thoughts would be useful...

  Kind regards

  Richard

  Richard Legge wrote:

  Ive been told I should not use the existing themes, as are day a non-compliant with new browsers. However, some are very nice, and it's a shame, that they should not be used...

  As discussed in one of your previous threads, some 'legacy' themes are older than others. I wouldn't really classify a focus standards mode introduced in APEX 4.0 as "legacy", unless you need a complete support on mobile devices. As already said, I would like to avoid completely the themes of quirks mode 8, 10, 11, 13, 14, 15, 16, 18, 19 and 20.

  No one knows if they will become in the future

  Unlikely. A few fairly important bugs in original/first themes have never been fixed, so it is unlikely that Oracle will spend any effort to change them in the future.

  is it possible to migrate their?

  Regarding the themes inherited from 'real' quirks mode (marked with a ' * ' and listed above), my advice would be Don ' t bother. IMO, none of them are visually interesting enough to be worth the effort. Migration would imply:

  1. Adding a DOCTYPE HTML5 at all page templates to the trigger standards mode
  2. Validate the HTML code for all models
  3. Modify the HTML code to make it as standards compliant as possible
  4. Validate the CSS for all style sheets
  5. Edit the CSS to make it as standards compliant as possible
  6. The appearance test, dynamic behavior and accessibility in all required browsers
  7. Fixing of Visual rendering, dynamic behavior and accessibility (HTML, CSS and JS)
  8. Repeat 2 until levels required compliance to standards, rendering, dynamic behavior and accessibility are met.

  It's not trivial.

  What are the implications of the use of one of the old legacy themes?

  The themes 'true' legacy to be run in quirks mode, there will be problems with:

  • Lack of support for some features of APEX 4.x (for example, selectors of the region and interactive reports on the theme)
  • Incompatibility with jQuery waiting / requires the standard mode
  • Incompatibility with modern browsers and devices (pre - 4.x themes have been designed to be compatible with IE6 and equivalent browsers)
  • Incompatibility with modern HTML and CSS features due to running in quirks mode (there is a problem in Internet Explorer more than other browsers)
  • Accessibility issues
  • Difficulty overall customization appearance due to the incorporation of Visual elements (images and background colors) in table HTML layouts

  Designed for Internet Explorer, the situation is much worse. Basically, there is no support for everything that didn't work in IE6 (for some values of 'work'). This means no CSS3, no support for many useful things from the CSS 2.1 (e.g. attribute selectors) specification and no support for the various elements and HTML attributes.

  For the themes "inherited" standards mode, there will be fewer questions, probably mainly related to accessibility and support for non-bureau devices.

  See also was content to change the Page size for a similar description.

  Version 5 will implement some new themes?

  Yes.

  Are at - it somewhere that Ive missed all good themes 'out there'... ?

  Third party themes are available (usually for a price) from various places.

  What other ways are there to customize the new themes... (and Im not a Web Designer and not a CSS expert either)?  Is there a generic method of simple method to change the topics without hours exploring CSS... (for example by changing the general theme to a more obvious color..)

  Probably not. Especially for a novice not familiar with more advanced CSS techniques.

  My thought is around 5 or six changes their that change the appearance / colors/style throughout the entire application etc...

  This is likely to be amazingly difficult as the new themes make great use of the edge of CSS technical bleeding with several layers of rules to specify the appearance of a component. Heavy duty also includes CSS sprite images, which means that this customization requires editing of image as a substitute or changes to the CSS rules. See the following for examples:

  • Re: How to change the Crimson color on issue 23
  • Re: Changing the background color of the Page template
  • Re: Change the color of the title area of report Standard
  • Re: Menu Navigation region too narrow - style = "width: 200px;"?

• Some General Questions about the externalization of authentication

  We plane to outsource the APEX authentication so that it would be linked to the credentials of the end-user network. Were do because:
  
  It is more in line with the expectations of the users.
  It will simplify maintenance by the user.
  When the user leaves the ice, their APEX access will be automatically disbanded as their network connections are disabled.
  
  We found some very good articles on the subject, for example http://www.greenit.li/greenIT/Willkommen_files/Oracle_APEX_ProofOfConceptNTLMPLSQL.pdf (other suggestions would be welcomed and encouraged). However; We have a few questions:
  
  The first is authentication and authorization. We get how end users can be authenticated based on Active Directory. However, within the APEX now, create us a new user and specify if who are developers, who, team development Application Builder, SQL workshop, they can access. schemas are accessible to them, etc. This page requires, of course, a password.
  
  How will this work if the authentication is outsourced? We always create the same user in the APEX?
  If so, what should we put the password related areas?
  If this is not the case, how do we control authorization once authentication completed successfully?
  If not, how to make the application available for users (authenticated network) and not others?
  If the application allows the user to pass a password (assuming that they are properly connected to the network), what should happen when a person clicks on logout?
  
  Thank you for any input,
  
  -Joe

  Joe Upshaw wrote:

  One of the elements of game here (great requirements above) is to make sure that the APEX applications are directly linked in the cycle of creation/decommissioning of the user of the organization. In other words, the desire is that deleting or disabling a user account in the central directory (Active Directory) have the effect of disabling access to all enterprise systems. We do not expect to allow some "heavy" end users the ability to access the SQL browser. Is there something that can be done, perhaps with the authorisation schemes, which would allow their access is automatically revoked if it network id have been revoked? Can authorisation schemes be applied to the APEX development pages maybe?

  Laughing out loud

  The only thing that comes to mind is running a scheduled task on your databases which retrieves users APEX in the APEX_WORKSPACE_APEX_USERS view, checks the user account is still valid in AD using dbms_ldap (assuming that the user IDS match, or there is a convention to get from one to the other) and removes , expires or to block those who are not using the APEX API. The problem which is the

  To perform this procedure, the current user must have administrator privileges in the workspace.

  restriction to the user of apex_util API. Comply with the scheduled job will have to Re: create a session programmatically (that is to say, outside the APEX)., who is skating on or above the line about the API without papers/not taken in charge. This may be frowned upon by the great above and Oracle. (However, in this case it is less of a concern that the use of such methods in your APEX applications, which certainly, I would not recommend.)

• General questions about the upgrade

  Hello

  I have aquestion about the upgrade,

  When I did an upgrade from windows 7 home ultimate version or another for example windows 8.

  1. no data not wil drop in time upgrade or I do a backup copy be sure.

  2 wil that any software that is installed before the upgrade for example antivirus, office 2010 wil be on the computer after the upgrade? or what I need to install again!

  3 when I do an upgrade must I pay online for the new version?

  answers very short wil suffice.

  Thank you

  Johan

  1. your files should be kept in an upgrade, but we always recommend making a backup to be sure.

  2. your software will be kept, but as with #1 above, we recommend to always have your install CD/file available to be safe in case you need it.

  3. you can buy the edition of Windows 8 Upgrade from a store or online, Yes. It is not free.

• General questions about the hardware of a computer running windows 7

  Hello

  I downloaded the third-party software to measure alive my processor and heat from the hard drive.

  now my question is

  Wat is the maximum heat for a processor is normaal in action 50 or higher?

  THA same I ask for the hard drive.

  Thank you

  Johan

  Hello

  I downloaded the third-party software to measure alive my processor and heat from the hard drive.

  now my question is

  Wat is the maximum heat for a processor is normaal in action 50 or higher?

  THA same I ask for the hard drive.

  Thank you

  Johan

  Hi Johan

  It depends on the manufacturer, the type and the version of the processor, as well as the way in which the CPU is used.

  Operating temperature of the processor FAQ:

  http://www.Intel.com/support/processors/sb/CS-033342.htm

  Concerning

• General questions about the material

  Hello

  1. it is true that the new power supply uses only 70% of its power? If so, after a few years, how many % of its power it wil use 60, 50%!

  2. I know that viruses and the power supply crash problems wil and sometimes every time reboot the computer.

  can also problems of memory each time restarting the computer?

  the same question I ask for the processor and the video card.

  also, I want to know if the hard drive has a behavior too also.    Wil just Yes or no will suffice.

  Thank you

  Johan

  Yes, everything you listed can cause a BSOD, or reset, but reboot is perhaps most often a power supply problem.
  I'd be inclined to suspect the PSU power supply, HARD drive, motherboard, processor and RAM (in that order),
  with random reboot.
  Virus/Malware can also launch reboots.
  Graphics cards would more often cause BSOD or TDR errors, but random restart is possible.

  Power supplies have abilities different, usually measured in Watts/amperes. How much of this
  the capability is used by the machine in percent is determined by the requirements of the power of the components
  in the machine.
  Dedicated graphics cards are often the component with the higher power requirement.
  The processor also uses a lot of power, and in the absence of a dedicated graphics card would have the
  power requirements more. The other power requirements of components are quite small.

  Power supplies have an efficiency rating, with a performance of over 80% is desirable.
  Power supplies some of the ability to lose over time, but the current amount of the lost production is not
  drama short term (first five years?), at least not with good quality food.
  Cheap power supplies are another story. The can't count on him for reliability and are not
  a good option on machines that are often under heavy load - machines games for example.
  An additional 50-100W on requirements minimum psu is commonly used on gaming machines
  as the assurance of stability.
  If a power supply fails it may damage other components.