General research of the interactive report takes a long time

Similar Questions

• The system preference takes a long time to load

  As the title suggests, end of 2013 (10.11.4) System Preferences on my iMac takes a long time to load, even after a fresh reinstall and/or reboot (tried both). It takes about 20 seconds to one minute each time to open (except when I close it and immediately open it once again, as it is always loaded in memory). This problem existed only after the upgrade to El Capitan, and I saw many other people with iMacs with the same problem. I tried to remove cache for before system preferences files, but that did not help at all. I don't have a FileVault if it makes a difference, even if I did before reinstall, but never turned back (persistent question anyway). Any recommendations would be useful. Thank you!

  Data sheet:

  iMac (end 2013)

  Intel Core i5 at 2.7 GHz

  8 GB 1600 MHz DDR3

  1 TB 5400 RPM HARD DRIVE

  Intel Pro Iris 1536 MB

  I found it is the State of affairs in 10.11 if running a HD spinning.  Don't feel alone.

  I suspect that it is a function of low priority in the memory compressed algorithm.

  Upgrading to an SSD and it will rise to attention.

• Increase the performance of research in the interactive report

  Hello
  
  I created a report that around 10,000 + records. To load the report, it does not have a lot of time. But when I do a search in interactive report that it takes a lot of time. Please suggest me how to increase the performance of interactive research.
  
  I use Oracle apex 3.2 and Oracle 10 g XE database.
  
  
  Please suggest me.
  
  Thank you
  Sudhir

  Antonio,

  Pagination: thank you. My concern was if pagination is in the form "x y z", where z is the total number of lines, then all lines may need to be returned to produce the total number.

  Function: Nice modular approach. As suggested above, four by rank function calls could produce a LOT of overhead in APEX (or elsewhere). A way to see if it is part of the problem, replace the code in function just a call with the code online and see if you get a large (15 to 20%) to accelerate.

  Howard

• ALTER TABLE SHRINK the SPACE COMPACT takes a long time

  Hello
  I run:
  ALTER TABLE TOM. TAB1 SHRINK SPACE COMPACT;
  ALTER TABLE TOM. TAB1 SHRINK SPACE WATERFALL;

  
  The "ALTER TABLE TOM. Tab1 SHRINK SPACE COMPACT"was completed in 2 hours, but"ALTER TABLE TOM. Tab1 SHRINK SPACE WATERFALL"is still underway after 8 hours, less than the size of the table TAB1 and index:

  NOM_SEGMENT... GB
  TAB1................................. 166
  IDX01................................ 83
  SYS_C00......................... 42
  IDX02............................. 142
  IDX03.............................. 66
  IDX04............................. 122

  
  Why 'SHRINK the SPACE COMPACT' takes a lot of time?
  Is it possible to check how much time should I take?

  Thanks in advance!

  Running

  ALTER INDEX TOM. TAB1_IDX03 SHRINK SPACE COMPACT;

  ALTER INDEX TOM. TAB1_IDX03 SHRINK SPACE;

  set is useless, as does 'SHRINK the SPACE' that means "SHRINK SPACE COMPACT" and much more (see the quote from the Doc Oracle Hemant).  2, 'SHRINK the SPACE' is the operation that will take more time.  So if 'SHRINK the SPACE' is what you wanted (reclaim space) and you can afford to wait, run 'SHRINK the SPACE' only.

  "SHRINK the COMPACT SPACE" is a part of the work that 'SHRINK the SPACE' is only.  Generally, use you it when time is at a premium: you run SHRINK SPACE COMPACT a weekday evening (because SHRINK the SPACE does not fit in one night and accrue hourly) and you run SHRINK SPACE on the weekend to finish following the recovery of your space.

  Regarding the fact that the entire segment or a partition after another, I have no experience - I both of their time and test methods.  Perhaps running several sessions at the same time on different partitions would save time (but be more heavy on the CPU and storage).

  Also note that SHRINK the AREA generates a lot of REDO (keep an eye on the free space of your ARCHIVELOG destination).  With your data volume, I would expect dozens (or even hundreds) of gigabytes of roll forward must be generated.

• APEX_UTIL & APEX_INSTANCE_ADMIN take a long time to display the results in the browser

  Hi gurus of the APEX.
  When I create a new workspace with and add a new user with the API
  It takes a long time until I can see the results in the admin interface apex I NTHE browser.
  Why is this?
  Someone can explain or do you have a work around to make it faster?
  
  
  Here is the code I use:
  
  BEGIN
  APEX_INSTANCE_ADMIN. ADD_WORKSPACE(1196509005817318,'WORKSHOP','HR',)
  wwv_flow_api.set_security_group_id('1196509005817318');
  APEX_UTIL. CREATE_USER)
  p_user_name = > 'MY_ADMIN ',.
  p_first_name = > "FRANK."
  p_last_name = > 'SMITH ',.
  p_description = > "Description...". »,
  p_email_address = > '[email protected] ',.
  p_web_password = > 'oracle ',.
  p_developer_privs = > ' ADMIN: CREATE: DATA_LOADER:EDIT:HELP:MONITOR:SQL',.
  p_default_schema = > 'HR ',.
  p_allow_access_to_schemas = > 'OEHR. "
  p_change_password_on_first_use = > 'n',.
  p_attribute_01 = > ' 123 456 7890');
  END;
  /
  
  
  Thanks in advance.
  BR,
  Lutz

  Hi Lutz,

  I'm going to ask the obvious question, please do not be offended ;)

  You remember to "commit" the end of it if you run via SQLPlus etc.?

  John.
  --------------------------------------------
  Blog: http://jes.blogs.shellprompt.net
  Work: http://www.apex-evangelists.com
  Author of Pro Application Express: http://tinyurl.com/3gu7cd
  AWARDS: Don't forget to mark correct or useful posts on the forum, not only for my answers, but for everyone!

• Satellite M300 PSMDCA takes a long time to start

  I have a Toshiba Satellite M300 PSMDCA - 01800C and there are some problems with it.

  First of all, when you start the computer, it takes a long time to start and activate Outlook.
  I am running Windows 7Home Premium.
  Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  Is it normal that all I wanted was a simple portable easy fast, but it seems that I am stuck again.

  Also, when I go back to the computer, even after some time the mouse it does not provide new and pushing the Start button just a blank screen. Alt + Ctrl + delete, then he activates Windows again and then after having put my password and I have to wait for that be again loaded everything that takes so long. Any ideas?

  Also I often get the message when the computer starts "error has occurred in Toshiba PC Health Monitor. He will leave the application. "Main.frm.cpp (184). Any ideas?

  Quite often when I am scrolling with the mouse, the screen will turn black and flash and a message «the NVIDIA display driver... couldn't Reg...» "and he will correct itself after awhile. Frustrating!
  Quite often when scrolling on the websites of the page I'm going to freeze?

  I use MS Office 2010 and there is a problem trying to save Word documents and a message comes up with "a file permission error.

  Any thoughts? Thanks, Shirl51

  > First of all, when you start the computer, it takes a long time to start and activate Outlook. I am running Windows 7Home Premium. Computers arrow where I bought the computer told me that it can take up to three hours to go back through each process at startup?

  This nonsense!
  The system should boot up quickly my laptop needs 30 seconds to start.
  In my opinion, the system is screwed

  In your case, I recommend to reinstall the system.
  Did you create the recovery disk?
  If this isn't the case, I think that detailed instructions should be placed in the user's manual.

  After the recovery of disk has been created, restore the system, BUT save the data before doing so because the recovery disk would be to format the HARD drive and you lose data!

• XY graph sometimes takes a long time to update legend

  Hello

  I wrote a small piece of code that highlights (changes line width) the plot on the graph when we click a mouse on its name in the legend of the plot. The code works well except when I the legend scroll bar is visible and its position is not 0, then when I click on the name of the parcel, the chart takes a long time(>4s) to change the width of the plot on the legend. The plot on the graph is updated instantly. Its only the legend of the plot that takes a long time to get updated.

  I enclose the code here... Please, run it and see if you also see the same behavior.

  Thank you

  Ritesh

  Hi Ritesh,

  The patch of f2 is already released. http://www.NI.com/download/LabVIEW-development-system-2015/5656/en/

  We will inform you of the R & D of your first question, but unfoturnately we cannot provide information on future products releases.

  Kind regards

• additional restrictions in the interactive report

  Hello
  I have very long-running query. When I add a few restrictions, it becomes quite fast.
  At the Summit, I have a default filter that returns me only necessary lines (as with additional restrictions in the sql query). But I think that the filter in the apex is applied after any result set returned by the query. If it takes an eternity to get results in the apex.
  
  How can I add additional restrictions to the interactive report of apex query?

  I don't know when the filter of interactive reports are added. Before or after that the result set is returned. An interest in research.

  But it seems that you have performed a very important request that will eventually be filtered.
  -This application can be optimized?
  -Is huge (as you call it) really necessary query? You cannot opt to make specific smaller reports?
  -Finally, you can make your own filters. Placing edit boxes (or drop-down lists) to impose conditions that will be read in where clause of your query.

• Default icons only for the interactive report

  Hi all
  
  I develop a style app catalog and display of images in an interactive report; I can get the interactive report to show the icon when users visit the report the first time, the report is quite simple. It has a series of buttons for Sections of the catalogue and when the user presses the button he fills a hidden element that is in the where the criteria catalogue, all it works fine with one exception:
  
  1. when the user clicks on the button catalogue and interactive data in gear changes; report changes 'View report', I want to maintain state in "Fashion icon" is possible that someone knows how can I have the interactive report only display "icon.
  
  
  Thank you very much for your help in advance, I tried a couple of things and nothing... any help would be greatly appreciated.

  958442 wrote:
  Hi all

  Welcome to the forum: read the FAQ and the forum threads sticky (if you have not already done so) and update your profile with a real handle instead of '958442 '.

  When you have a problem, you will get an answer faster, more efficient including information as much information as possible from the outset. This should include:

• Full version of APEX
  
• Complete operating system DB, version, edition, host
  
• Architecture of Web server (EPG, SST or APEX listener/host operating system)
  
• Browser (s) and version (s) used
  
• Theme
  
• Model (s)
  
• Region/section type (s) (particularly as to distinguish if a 'report' is a standard report, an interactive report, or indeed a 'update report' (i.e. a tabular presentation))

  With APEX, we also had the chance to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproduce things is the best way to solve most of the questions, particularly those relating to the layout and Visual formatting. If you expect a detailed response it is appropriate that you take on an important part of the effort by getting as much as possible with an example of the problem on apex.oracle.com before asking for help on specific issues, then we can see firsthand.

  I develop a style app catalog and display of images in an interactive report; I can get the interactive report to show the icon when users visit the report the first time, the report is quite simple. It has a series of buttons for Sections of the catalogue and when the user presses the button he fills a hidden element that is in the where the criteria catalogue, all it works fine with one exception:

  1. when the user clicks on the button catalogue and interactive data in gear changes; report changes 'View report', I want to maintain state in "Fashion icon" is possible that someone knows how can I have the interactive report only display "icon.

  Thank you very much for your help in advance, I tried a couple of things and nothing... any help would be greatly appreciated.

  It also helps explain what you tried (even better, Show us what you have tried on apex.oracle.com).

  You can view the IR to the default icon via a dynamic Action: + {: identifier of the thread = 2187972} + (obviously using "ICON" rather than "RETAIL"...)

  However, do you really intend to make use of other interactive report features? It seems that the report display is controlled by custom buttons, rather than shares of IR (filters, control breaks etc.). If this is the case then a standard report based on a custom template may be a better option than to try to work around all that offer interactive reports.

• "of data type not supported" in the interactive report

  Hello
  
  I'm trying to download a file from a link to an itneractive report.
  
  In the section "attributes of report" interactive column, I defined in the section "links" in a column of the 'target', 'URL', and the URL like this:
  

  DOWNLOAD:CONVENTIONS:#FILE_BLOB#:#ID#::#MIME_TYPE#:#FICHIERS#:#LAST_UPDATE#::attachment:Conv

  When I run the interactive report, the link view this:
  Download: CONVENTIONS: [type]:188:C22.pdf:attachment:Conv of data not supported
  
  The table "CONVENTIONS" is defined as follows:
  ......
  ACTIVATE THE 'ID' NUMBER NOT NULL,
  VARCHAR2 (2048 BYTE) "FILES."
  'FILE_BLOB' BLOB,
  "LAST_UPDATE" DATE,
  'MIME_TYPE' VARCHAR2 (255 BYTE)
  
  Where is my mistake?
  
  Thanks for your help!
  
  Christian

  Hello Christina,

  Sorry Wizard, you need to use is the "form > form on Table with Report", because the normal create assistant interactive report allows you to enter a query.
  Once you have completed the wizard, take a look at the generated SQL statement (must use the dbms_lob.getlength) and the value in "number Format / Date" for this column.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins

• Apex 4.0 how use the interactive report filter feature?

  Hi all
  Sorry for the nub question, but if there is a way to create and save 'report' with the filter condition using a function?
  What I want to do is to create an interactive table called TASK report.
  Table has two columns I want to use for filtering:
  FDate - DATE - date
  TDate - DATE - to date
  Then, I need to create multiple saved reports:
  last week the tasks = where FDate between sysdate - 7 AND sysdate...
  last month tasks = where FDate between ADD_MONTH(sysdate,-1) AND sysdate...
  but,
  Interactive report filter does not accept sysdate or calls to functions ADD_MONTH.
  Is there an easy way to configure this feature?
  TIA
  Thomas
  
  Sorry for the double post...
  
  Published by: thomaso on August 6, 2010 12:04

  Hi Thomas,

  Take a look at the type of filter 'Row' in the interactive reports filter dialog box. This allows more dynamic filters, such as those involving SYSDATE or ADD_MONTHS calls. See also the next thread for some more details on this:

  Re: Interactive report - line conditional highlighting date function

  It will be useful.

  Anthony.

• link to the interactive report with filter

  I tried to put in place a link to an interactive report in passing along a filter setting using the method described in the user guide. I've tried everything I can think of to make it work, but the report always ends by displaying as unfiltered. I don't get any errors, I don't see any filtering. I tried to directly modify the URL and adding the filter data (that is, add IREQ_ParentSeqID:2 to the URL) and I also tried to pass the filter data by creating a branch from another page and have the branch collar data. In both cases, I was unable to make it work. When I create the filter directly in the report, it works fine. Here is a sample
  URL: / f? p123:1302:3440331697632217:no:IREQ_ParentSeqD:2
  
  The URL takes me to the correct page but no filtering occurs. Here is the definition of the column in the interactive report:
  Column name: ParentSeqID
  Column type: NUMBER
  
  I'm under APEX version 3.2.0.00.27

  Dale,
  What happens if you remove the EQUALIZATION of the setting? Theoretically, it shouldn't matter, but I always send my equals as just IR_COLUMN and it works fine.

  You can try f? p = 123:1302:1023072115021841:NO:IR_ParentSeqID:25

  and see if that makes a difference? Just a shot in the water.

  If this does not work, try to delete the alias for the moment and sending the column full name and see if that makes a difference. I wonder if its because your alias is in a specific case (per the "")

• Customize the Action menu in the interactive report

  To change the word 'Action' in the menu of the interactive report.

  Apex 4, we had the 'Image of the Action menu' option, but the Apex 5 this option disappeared.

  This isn't in known issues in the Apex 5!

  Someone knows how to set an image or other text to the menu Action interactive report?

  Anderson.Ferreira wrote:

  To change the word 'Action' in the menu of the interactive report.

  Apex 4, we had the 'Image of the Action menu' option, but the Apex 5 this option disappeared.

  This isn't in known issues in the Apex 5!

  Someone knows how to set an image or other text to the menu Action interactive report?

  Why do you need to change?

  Follow the instructions in 'Translating Messages used internally by Oracle Application Express' to create a custom text for the message of the APEXIR_ACTIONS system. Available for translation/customization internal messages are listed in these tables.

• Initial value for the interactive report

  I have an interactive report that has a where clause condition clause: where =(:P50_employeeName) used.

  (: P50_employeeName) is a a list of selection without value null. When the page loads the selection list displays the value employee1, but the interactive report is empty. It's not until I select another value within the selection list becoems active report. How I can so when page loading the interactive report shows instead of being blank? I can't the values of hard employee-coding as each user can see only the user in their Department.

  Hello

  Since I don't know all your table structure, it was just a quick sampling of the approach.

  I guess that your LOV would have the correct where clause to control its content, and you can add additional conditions to the IR where clause as well.

  Here is an example of one of my IR where clauses

  the case when: P200_DEPARTMENT = 0 then 1

  When: P200_DEPARTMENT <> 0 and: P200_CREW = 0 and: P200_DEPARTMENT = c.crewdeptkey, 1

  When: P200_DEPARTMENT <> 0 and: P200_CREW | " <> 0 and: P200_CREW = c.crewkey, 1

  end if 0 = 1

  Kind regards
  Brad

• Filter column position of the interactive report

  Hi all!

  First of all, sorry my English.

  I have a problem with filters standart on the interactive report column heading. Version 4.0.2 APEX. It is interactive report based on the view. Nothing unusual - behavior and the default templates. I have also the region of filter on the page, and after user-press "apply" button my package variables to session state of filter. View used these values. It is worked and filtered interactive report. But when I try also to use the filters on the heading of the column that is nothing past. I have try the column type: report Standart column and display text. I have try the Filter Type column: by default based on the Type of column and the list defined by the use of... Contain. Nothing, as no filter exists at all. Filtering with worked as usual action buttons. I think that this problem in a SEPARATE implicit in this filter. I know that there are quantitative limitation of DISTINCT values with column header filter, but I have nothing in the filter. And even I have type the value and press ENTER, nothing happened. Columns with Date type is fine, but String and number does not.

  There is no work around? Thank you.

  Solved within "parameterized" view, remove and replace with SELECT with params.