Where the unallocated region?

Similar Questions

• Impossible to change the settings for the overlap of the midi regions

  Hi people

  Trying to change my project settings so that my midi regions overlap or merged.

  However, when I select the different options in the project settings - setting won't change even after choosing, he. All the default to replace & I can't change anything...

  Any ideas?

  1 - ability to select IMAGE options, but as soon as I click on it it goes back... (see image 2)

  

  IMAGE 2

  

  Weird. Since nobody had a suggestion again I'll propose to eliminate most bizarre factors:

  -Check the permissions to read / write to the project folder, you are working, and where the logic is in. You have full access?

  -Detach the Audio interfaces / external MIDI, reboot and external logical beginning without entries/connections

  The same problem happens for tracks Audio parameters too?

• Satellite L310-D4011: how to reset the DVD region to 0 setting?

  Dear all,

  I have a Satellite L310 D4011 I bought recently in which I installed a DVD playback software.
  I run Windows XP. One of my friends played a video clip of the United Kingdom (Mccartney Live at red square) in the DVD player and the original region setting that was 0 with 5 remaining changes, went to 4 changes remaining and the area is now set to 2. I am in India where the region for DVD is 5. If I change to 5, I lose another change option.

  I don't want to leave my DVD ROM stuck 0 left options and some other areas.

  Can someone give me advice to reset the region back with five remaining options - as it was when I bought the laptop?
  I'll be very grateful. The salesperson who I bought the laptop will be able to get back to factory setting?

  Best wishes

  Hello

  I think Toshiba has nothing to do with it. To protect the film industry and interests all laptop manufacturers offer optical disk drives where you can watch movies with country code but only 5 times. The last chosen region code will be set as default. So if you have more than 4 codes there is no reason to panic. Just continue to watch movies in your favorite area.

  I'm 100% sure that Toshiba service or the vendor where you bought your laptop will say that they have nothing to do with it. In drive properties you have set out to clear how it works.

  In any case, you can try to contact them and ask for help.

• Where the security of the browser Tab in 4.2.6.00.03

  Version 4.2.6.00.03

  Hello

  This seems to be a really stupid question, BUT... Where the security of the browser tab in this version?

  I thought he was under Edit Application Properties-> Security-> and between Protection of Session State and Session data tabs?

  I don't have it. I watched all the tabs and regions.

  

  Can someone tell me where I can find it?

  Thank you

  Joe

  Joe R wrote:

  Version 4.2.6.00.03

  This seems to be a really stupid question, BUT... Where the security of the browser tab in this version?

  I thought it was under Application properties change-> Security-> and between the legs of the Protection of the State of Session and the data Session?

  I don't have it. I watched all the tabs and regions.

  

  Can someone tell me where I can find it?

  It is visible only when the Compatibility Mode is set to 4.2 in the Properties section of the Application definition tab.

• Help keep the page in the same region after Submit

  Version: 4.1.1.00.23

  Theme: Classic Blue

  Page template: tabs in level one

  Hello

  I have 6 Classic reports on the page. Some have filters with of LOV in cascade and button to submit the Page after the filters are selected.

  The Page reloads the top of the page after sending filters.

  I would like to have the page remain on the region where the submission arrived if the user do not scroll to the region that they watch one or work with him.

  I found this article: http://http :// www.apexninjas.com/blog/2011/02/stay-in-page-section-after-submit-on-same-apex-page-unconditional-branch-to-same-page-section/ of Apex Ninjas, but the page reload always at the top.

  I also tried to put an anchor at the bottom of the Page template tag in the Body section after all the tags:

  #LOGO #. #REGION_POSITION_06 #.

  #REGION_POSITION_07 #.

  #NAVIGATION_BAR #. #REGION_POSITION_08 #.

  #TAB_CELLS #.
  #SUCCESS_MESSAGE # NOTIFICATION_MESSAGE # GLOBAL_NOTIFICATION #.

  #BOX_BODY # REGION_POSITION_02 # REGION_POSITION_04 #.

  #REGION_POSITION_03 #.

  #REGION_POSITION_01 ##CUSTOMIZE #

  I have a branch:

  Present immediately after treatment

  Target type of URL

  URL of: f? p = & APP_ID.:124: & SESSION. : #APPLY_FILTERS_MPL_LT

  But the Page still loads up and scrolling is necessary.

  Can someone help me get this to work?

  Can what information I provide?

  Thank you

  Joe

  Tom,

  The 'Skip' and 'submission' comes from the LOV cascading I.

  Here are the lists of select Standard. The parent list is called ID wallet and the list of children is called project name. So, if a selected portfolio list project name code displays the project for this portfolio ID name. If no ID portfolio is selected then all the project name are displayed.  When checking for Session I knew if a wallet code has been selected, then the default ID, 'All' portfolio, has been selected Session still had the previous ID and therefore the Select project name list was empty.

  What I don't understand is that when the default portfolio ID is selected, even if the 'Null' is set to 'Yes', and the default value has been set to 0 (zero), the Session was not updated when the default has been selected.

  I changed the query on the Portfolio ID to:

  SELECT 'All' d,0 r
  FROM dual
  UNION
  SELECT portfolio_name, portfolio_id
  FROM   portfolio
  ORDER BY 1
  

  The 'Skip' and 'submission' came from portfolio ID "Action when the changed value of the Page" Configuration. I had it set on 'Redirect and set the value. When I changed it back to "None (default)" and set 'Cascading item (s) Parent LOV' project name to the page item Portfolio ID and then the page started working as expected.  No more 'jump' or 'submit '!

  Thank you very much for your help and your patience!

  Let me know if you have any questions or comments, and if I can close this thread.

  Thank you

  Joe

• refresh the html region when the selection list or selected ir line chang

  Apex 4.2

  Hello

  I made a simple page for test actions.

  I have

  -an interactive report and a selection in my first area list.

  -a field of text (P5000_indid) to keep the selected indid

  -region of html where the source is:

  DECLARE

  CURSOR c_ind IS

  SELECT indid, ind, industry

  IND

  WHEN indid as: P5000_INDID;

  BEGIN

  FOR a c_ind IN LOOP

  HTP.p ("< style b =" white-space: nowrap;) "> Indid: ' |" a.indid |' ---> ' || a.Industry: '< /b > < br / >');

  END LOOP;

  END;

  I'm sorry, but I m a bit confused with all the things I read before and do not know what is possible or not and what is the best practice to:

  1. select in the selectList (is it also possible to retrieve the selected (highlighted) or line in the IR)

  2 update the P5000_INDID

  3. refresh the html box according to the value of P5000_INDID (I was able to refresh an IR according to value, but there was the possibility to say what variable to present, but I have no

  see for the region of html)

  I m doing this test, because in the end, I would like to be able to regresh a small chart according to the selected line of the IR.  Do you think that it is possible to s?

  Sorry for my newbie question

  Thanks for your help

  L.

  OK, I finally found everything that I needed,

  You can test it on:

  http://Apex.Oracle.com/pls/Apex/f?p=53793

  Demo/demo

  the content of the output area now is the result of an application process, according to a parameter.

  It is called with javascript onChange and response replace the contents of the region

  and you can also see that I can now select a line and show it by changing the color of the line, and then update the output.

  and when a line is selected, it resets the selection on the selectList to avoid triggering the event on the selection list.

• identify the areas where the check box is selected

  Hi all
  I have a page that contains 3 report areas, each with a checkbox column. The user has the option to select lines in each region and I need store the selected lines in a database table.
  I created the sub process to insert data into the table.
  
  BECAUSE me in 1.APEX_APPLICATION. G_F01. Count
  LOOP
  insert into tbl_name (c1, c2, c3) values (v1, APEX_APPLICATION. G_F01 (i), v3);
  END LOOP;
  
  The process is executing well and insert the data into the table. But the problem is when the user select lines in different regions, I get all the lines inserted in the tables, but I'm not able to identify which line is selected in which region. Is it possible to identify the area where the line is checked.
  
  Thanks in advance for the help.
  Kind regards
  Prasanth

  Hi Prasanth,

  Your probably using the apex_item package to generate checkboxes. So, try to change the p_idx parameter.
  In your case, it is probably p_idx-online 1. In other 2 reports put at 2 and 3 and then to the process you can extract only with in APEX_APPLICATION. G_F02 and APEX_APPLICATION. G_F03 berries.

  BR,
  Marko Goricki
  -------------------------
  http://apexbyg.blogspot.com/

• Use a static file as the source of the HTML region

  Hi all
  
  Sorry for the maybe trivial question, but is be possible to use static files as the source of the HTML region? The files are pretty simple, but must be translated so we prefer to keep as a static, rather than paste multiple lines of region to conditionally display files.
  
  I tried something like
  
  < embed src = "#WORKSPACE_IMAGES #& FSP_LANGUAGE_PREFERENCE.file01.txt" >
  
  It is however showing the HTML source on screen and making is not in html format.
  
  The other option, I tried creating a URL zone that would get the content from the server, for example:
  
  http://localhost:9080/Apex/wwv_flow_file_mgr.get_file?p_security_group_id=4874627831984398 & p_fname = en_file01.txt
  
  ... but I'm running against error access control list (ACL). The file opens when you load the link directly in a browser, but apparently localhost is not allowed to ACL and I would not have sysdba access where to deploy.
  
  Finally I saw the recommendation to use an iframe in a similar discussion to display pdf file here Show PDF in Apex region Earth tried
  "< iframe src =" ' #WORKSPACE_IMAGES #& FSP_LANGUAGE_PREFERENCE.file01.txt & embedded = true ' style = "" > < / iframe >
  
  but receive "not found".
  
  The requested URL /apex/wwv_flow_file_mgr.get_file was not found on this server"as if the file name is not received? Eponymous is parsed correctly in the embed tag.
  
  Help, please
  
  Atanas

  Hello

  To me it sounds you can use shortcuts instead to locate some files in the workspace files
  http://docs.Oracle.com/CD/E37097_01/doc/doc.42/e35125/bldapp_cut.htm#sthref1696

  Kind regards
  Jari
  -----
  My Blog: http://dbswh.webhop.net/htmldb/f?p=BLOG:HOME:0
  Twitter: http://www.twitter.com/jariolai

• Expand the default region for the OFA standard

  Hi gurus,
  
  I am newbie to OAF and obtained requirment for work on the scenario where the customer expects to expand the subregion for OFA standard screen.
  By default, it appears (+) sign.
  Any who if wants to see the details of what they need click on the (+) sign to see the details for the screen.
  
  I can get this done by using customization?
  
  Marsan

  Marsan,

  Set the property initially disclosed to True for the region to hide show.

  Kind regards
  GYAN

• Calling a function in the apex region

  Hello
  I want to call a function from a package in the region of Apex report, but he used to analysis
  I tested in sql dev successfully
  
  code example goes like this...
  
  SELECT DISTINCT SOR_OFFENDER. FIRST_NAME. » ' ||
  SOR_OFFENDER. MIDDLE_NAME | ' ' ||
  SOR_OFFENDER. Last_name like "Name",
  SOR_OFFENDER_DETAILS.get_offlu_url(:p216_detail) - package where the function is defined
  OF SOR_OFFENDER.
  SOR_LOCATION
  WHERE SOR_OFFENDER. OFFENDER_ID = SOR_LOCATION. OFFENDER_ID
  AND: p216_detail = SOR_LOCATION. OFFENDER_ID
  
  
  
  
  any idea/help
  
  Published by: Red_Bull on 8 August 2012 15:02

  I agree. Until and unless it is absolutely necessary avoid calling function in a select statement because it will degrade your performance of applications over a period of time.
  As far as I know if the query is run in SQLDeveloper, it should also work in the APEX.
  I see a syntax problem in your query. Try this.

  SELECT DISTINCT SOR_OFFENDER. FIRST_NAME. » ' ||
  SOR_OFFENDER. MIDDLE_NAME | ' ' ||
  SOR_OFFENDER. Last_name like "Name",
  SOR_OFFENDER_DETAILS.get_offlu_url(:p216_detail) url,
  OF SOR_OFFENDER.
  SOR_LOCATION
  WHERE SOR_OFFENDER. OFFENDER_ID = SOR_LOCATION. OFFENDER_ID
  AND: p216_detail = SOR_LOCATION. OFFENDER_ID

  Thank you
  Mehabub

• getElementById() JavaScript does not work with the repeat regions

  I have tries an onmouseover and onmouseout to exchange all divs that recur in a repeating region of php and javascript doesn't seem to work for the first rehearsal of div. Is it because the repeat region creates a lot of identical divs and javascript code is confused?

  The following is a very simple version of my code setup which explains my problem:

  I create a forum where the individual comments are included in their own div ("commentDisplay"). To do this, I created a div and create a repeating region around it so that php will debit all the comments of each of them to give a copy of this div.

  for example:

  <? PHP {? >}

  < div class = "commentDisplay" >

  <? PHP echo $row_whateverRS ['whatever'];? >

  < / div >

  <? } while...? >

  Now, I wanted to create a simple javascript when the user moved their mouse on the station he would hide this div and display another div that holds the same content, but still had a background of different color and, most important, gave the user a chance to respond to the post (similar to the youtube comments section). So I created the following:

  < script... >

  function hideDiv (id) {}

  document.getElementById (id).style.display = 'none '; }

  function revealDiv (id) {}

  document.getElementById (id).style.display = 'block '; }

  < /script >

  and then I created this another div ("commentSwap"), which held the same information, but with a different background and an opportunity to respond (and with display: no) and insert the javascript code:

  <? PHP {? >}

  < div class = 'commentDisplay' onmouseover = "hideDiv ('commentDisplay'); revealDiv ('commentSwap')"onmouseout ="revealDiv ('commentDisplay'); hideDiv ('commentSwap') ">"

  <? PHP echo $row_whateverRS {'some']:?} >

  < / div >

  < div class = "commentSwap" >

  ... same-except the ability to answer

  < / div >

  <? PHP} while...? >

  the problem is that the code seems to work for the first rehearsal of the div and not the rest. In addition, when I move my mouse over the other div it causes the first div share.

  Why is this? Is it because all the Extensible divs (through the repeating region) all have the same name and confuse the javascript?

  Thank you

  YWSW

  YWSW wrote:

  So what do you suggest what to do instead (to produce the same see the div / hide div div result in a repeat region?)

  As shown by the fact that you can not have more than one ID on a page, my suggestion is to create the unique id in your loop. Database table has a primary key with the numeric IDs. As a result, the loop by adding the unique ID of the recordset object to the id of the div that is played repeatedly. Observe the provided code.

  ... same-except the ability to answer

• Number of records in the repeat region

  I have a page with a repeat region, which displays the records in Table1. Table1 is related to the Table2 (one to several, MS Access). I want to do is show the number of records in Table2 that are associated with a given row from Table1 shown in the repeat region.
  
  Think of how many responses listed next to each message in this forum, because that's basically what I do. As it is now, I get the correct number of records for the first line of Table1 shown in the repeat region, but this number is indicated in each line. In other words, if the first record displayed from Table1 has 3 matching records in table 2, 3 number in each row in the repeat region.
  
  I appreciate all the help that I'm a complete novice.
  
  

  Maybe it is not very effective, but I bet you it will do what you want:

  
  SELECT *.
  FROM table1
  ORDER BY name DESC
  

  
  SELECT *.
  FROM table2
  Where tid = #table1.id #.
  

  
  #table1.name #.
  #table1.client #.
  #table1.products #.
  $# numberformat (table1.income, '999,999.99') #.
  #table1.frequency #.
  #table2. RecordCount #.
  
  

• I know where the last call from my iphone stolen?

  I know where the last call from my iphone stolen?

  Not anyone here, not Apple. You can check with your operator if they used your SIM card, and you may have to get the police involved for the information about the location. If it was not your SIM card, you would not be able to.

• Where the health dashboard? How can I get it back?

  Where the health dashboard? How can I get it back?

  Press the tile of the activity.

  

  All sections of the dashboard are there now.

• shorten the length of the midi region

  How to change the length of a MIDI region without losing all the notes in the passage? I'm looking to ask recorded solo MIDI on an audio recording. By dragging the end or at the beginning of the region of MIDI to change its length eliminates some notes. I need to keep the whole region by making he puts in time on the audio MIDI. Thank you for any assistance.

  Press and hold the option key down while you drag the lower edge of the region when developing or compress midi.