Generate an incident error, Oracle
Hi allpurpose of test, to test my system monitoring and measurements, I need to generate an incident may be an error ORA-00600 or oracle similar;
No idea how to generate this kind of errors?
My database is RAC 11.2.0.2.3 on Redhat Linux 5.
Thank you very much
S
Tested successfully with XE 11 G:
SQL> declare
2 a exception;
3 pragma exception_init(a,-600);
4 begin
5 raise a;
6 end;
7 /
declare
*
ERROR at line 1:
ORA-00600: internal error code, arguments: [], [], [], [], [], [], [], [], [],
[], [], []
ORA-06512: at line 5
Source: http://www.bluegecko.net/download/breaking-oracle.pdf.
Tags: Database
Similar Questions
-
Hello
We are seeing the error below and failed to find any documentation on this. Suggestions to go beyond this issue?
(Build JDEVADF_11.1.1.7.2ADF - FAREL8 - BP_GENERIC_131030.1412.6661.3)
< sept 17, 2014 3:41:54 PM MDT > < error > < oracle.adf.controller.internal.binding.TaskFlowRegionModelViewPort > < ADFC-64010 > < ADFc: Page ' / oracle/rnow/firebolt/pages/workingUnit.jsff' references flow bind "Report1171410990113532" more than once, which is not taken in charge of responsibilities. The ID of the affected components are: "j_id__ctru15:0:j_id__ctru13pc2 j_id__ctru15:0:j_id__ctru9pc2". >
< sept 17, 2014 3:41:54 PM MDT > < error > < oracle.adf.controller.internal.binding.TaskFlowRegionModelViewPort > < ADFC-64010 > < ADFc: Page ' / oracle/rnow/firebolt/pages/report/reportMain.jsff' references task flow binding "dynamicRegion4" more than once, which only is not supported. The ID of the affected components are: "j_id__ctru15:0:j_id__ctru9pc2:0:rptf_rm_0_region4 j_id__ctru15:0:j_id__ctru13pc2:0:rptf_rm_0_region4". >
< sept 17, 2014 3:41:54 PM MDT > < error > < oracle.adf.controller.internal.binding.TaskFlowRegionModelViewPort > < ADFC-64010 > < ADFc: Page ' / oracle/rnow/firebolt/pages/report/reportMain.jsff' references task flow binding "dynamicRegion3" more than once, which only is not supported. The ID of the affected components are: "j_id__ctru15:0:j_id__ctru13pc2:0:r3 j_id__ctru15:0:j_id__ctru9pc2:0:r3". >
< sept 17, 2014 3:41:54 PM MDT > < error > < oracle.adf.controller.internal.binding.TaskFlowRegionModelViewPort > < ADFC-64010 > < ADFc: Page ' / oracle/rnow/firebolt/pages/report/reportMain.jsff' references task flow binding "dynamicRegion5" more than once, which only is not supported. The ID of the affected components are: "j_id__ctru15:0:j_id__ctru9pc2:0:rptf_rm_0_region1 j_id__ctru15:0:j_id__ctru13pc2:0:rptf_rm_0_region1". >
< sept 17, 2014 3:41:54 PM MDT > < error > < oracle.adf.controller.internal.binding.TaskFlowRegionModelViewPort > < ADFC-64010 > < ADFc: Page ' / oracle/rnow/firebolt/pages/report/reportNode.jsff' references task flow binding "dynamicRegion5" more than once, which only is not supported. The ID of the affected components are: "j_id__ctru15:0:j_id__ctru9pc2:0:rptf_rm_0_region1:0:r2Page j_id__ctru15:0:j_id__ctru13pc2:0:rptf_rm_0_region1:0:r2Page". >
< sept 17, 2014 3:41:54 PM MDT > < error > < oracle.adf.controller.internal.binding.TaskFlowRegionModelViewPort > < ADFC-64010 > < ADFc: Page ' / oracle/rnow/firebolt/pages/report/reportNode.jsff' references task flow binding "dynamicRegion6" more than once, which only is not supported. The ID of the affected components are: "j_id__ctru15:0:j_id__ctru13pc2:0:rptf_rm_0_region1:0:rptf_rn_2_r3Page j_id__ctru15:0:j_id__ctru9pc2:0:rptf_rm_0_region1:0:rptf_rn_2_r3Page". >
< sept 17, 2014 3:41:54 PM MDT > < error > < oracle.adf.controller.internal.binding.TaskFlowRegionModelViewPort > < ADFC-64010 > < ADFc: Page ' / oracle/rnow/firebolt/pages/report/reportNode.jsff' references task flow binding "dynamicRegion4" more than once, which only is not supported. The ID of the affected components are: "j_id__ctru15:0:j_id__ctru13pc2:0:rptf_rm_0_region1:0:r1Page j_id__ctru15:0:j_id__ctru9pc2:0:rptf_rm_0_region1:0:r1Page". >
< sept 17, 2014 3:41:55 PM MDT > < error > < oracle.adf.controller.internal.binding.TaskFlowRegionModelViewPort > < ADFC-64010 > < ADFc: Page ' / oracle/rnow/firebolt/pages/report/reportNode.jsff' references task flow binding "dynamicRegion2" more than once, which only is not supported. The ID of the affected components are: "j_id__ctru15:0:j_id__ctru13pc2:0:rptf_rm_0_region1:0:r2 j_id__ctru15:0:j_id__ctru9pc2:0:rptf_rm_0_region1:0:r2". >
< sept 17, 2014 3:41:55 PM MDT > < error > < oracle.adf.controller.internal.binding.TaskFlowRegionModelViewPort > < ADFC-64010 > < ADFc: Page ' / oracle/rnow/firebolt/pages/report/reportNode.jsff' references task flow binding "dynamicRegion3" more than once, which only is not supported. The ID of the affected components are: "j_id__ctru15:0:j_id__ctru13pc2:0:rptf_rm_0_region1:0:rptf_rn_2_r3 j_id__ctru15:0:j_id__ctru9pc2:0:rptf_rm_0_region1:0:rptf_rn_2_r3". >
Thank you
R
The error message to tell you that the page fragments ' done /oracle/rnow/firebolt/pages/workingUnit.jsff refers to a report or a report generator several times. This is not supported in your version. A workflow can only be listed once on a page.
You see the IDS of components that you should also see if you are using firebug. In the paper, it seems that you iterate some components which in turn the other reference work stream.
Timo
-
Local event ERROR: oracle.apps.ar.applications.CashApp.
Hello
I get frequent error notifications in my system of production with error message:
Local event ERROR: oracle.apps.ar.applications.CashApp.apply / oracle.apps.ar.applications.CashApp.apply_3336277_03 - 04-2012 14:31:15
These notifications are generated in 100 per day and has reached more than 200 thousand now.
Please suggest how to solve this problem.
Thank you.Post the details of the version of the application, the database version and the OS.
How do you get this error? What is the navigation path?
Please see these documents.
ARXRWMAI - receiving application generates workflow Notification with the error - error event Local: oracle.apps.ar.applications.cashapp.apply [ID 973074.1]
Get the error ORA-06502 offline Business Event Oracle.Apps.Ar.Applications.Cashapp.Apply [ID 951986.1]
Why the AR_TRX_BAL_SUMMARY table is out of date? [1315993.1 ID]
Problem when refresh AR Transactions summary tables fills WF_DEFERRED. [378279.1 ID]
Error AR_EVENTNOTFOUND in ARXRWMAI when the receiving application [841111.1 ID]Thank you
Hussein -
generate the xml to oracle table
Hello
I want to generate xml form an oracle table and using the sql express oracle developer 10 g, forler xdk is decompressed also under folder oracle express, still getting the following error: code used
ORA-06550: line 2, column 14:var g_clob clob; declare l_ctx dbms_xmlquery.ctxHandle; l_clob clob; begin l_ctx := dbms_xmlquery.newContext('select * from scott.emp'); dbms_lob.createtemporary(:g_clob,true,dbms_lob.session); :g_clob := dbms_xmlquery.getXml(l_ctx); end; /
PLS-00201: identifier ' DBMS_XMLQUERY. CTXHANDLE' must be declared
Thanks in advanceHello
DBMS_XMLQUERY is a wrapper for the methods in the Java class "oracle.xml.sql.query.OracleXMLStaticQuery".
The problem is that Oracle 10 g XE is not a JAVA virtual machine, you can not use this package.Use DBMS_XMLGEN instead, it provides similar functionality and is more effective (C-based):
SQL> var g_clob clob SQL> DECLARE 2 l_ctx dbms_xmlgen.ctxHandle; 3 BEGIN 4 l_ctx := dbms_xmlgen.newContext('select * from scott.emp'); 5 :g_clob := dbms_xmlgen.getXML(l_ctx); 6 dbms_xmlgen.closeContext(l_ctx); 7 END; 8 / PL/SQL procedure successfully completed. SQL> set long 5000 SQL> set pages 1000 SQL> print g_clob G_CLOB --------------------------------------------------------------------------------
7369 SMITH CLERK 7902 17/12/80 800 20 7499 ALLEN SALESMAN 7698 20/02/81 1600 300 30 7521 WARD SALESMAN 7698 22/02/81 1250 500 30 7566 JONES MANAGER 7839 02/04/81 2975 20 7654 MARTIN SALESMAN 7698 28/09/81 1250 1400 30 7698 BLAKE MANAGER 7839 01/05/81 2850 30 7782 CLARK MANAGER 7839 09/06/81 2450 10 7839 KING PRESIDENT 17/11/81 5000 10 7844 TURNER SALESMAN 7698 08/09/81 1500 0 30 7900 JAMES CLERK 7698 03/12/81 950 30 7902 FORD ANALYST 7566 03/12/81 3000 20 7934 MILLER CLERK 7782 23/01/82 1300 10 Or, using the SQL/XML functions:
SELECT XMLElement("ROWSET", XMLAgg( XMLElement("ROW", XMLForest(empno, ename, job, mgr, hiredate, sal, comm, deptno) ) ) ).getClobVal() FROM scott.emp ;
-
Measurement & Automation does not open and generates the MAXKnownException error with an unknown exception.
Heres the log
Context where the exception was taken:
(No context - the unhandled exception)Size version of Base module
-------------------- -------- -------- ------------------
NIMax.exe 00400000 0006 has 000 4.6.0.49152
ntdll.dll 770E0000 00180000 6.1.7601.18247
00110000-76060000 6.1.7601.18409 Kernel32.dll
KERNELBASE.dll 74E00000 00047000 6.1.7601.18409
SYSFER. 74830000 00072000 12.1.1101.401 DLL
1BFB0000 0001 NiMaxImp.dll B 000 4.6.0.49152
Shell32.dll 74E50000 00C4A000 6.1.7601.18429
Msvcrt.dll 76830000 000AC000 7.0.7601.17744
74 00000 00057000 6.1.7601.17514 SHLWAPI.dll
76740000 00090000 6.1.7601.18275 Gdi32.dll
00100000 76480000 6.1.7601.17514 User32.dll
Advapi32.dll 75DD0000 000 A 0000 6.1.7601.18247
sechost.dll 76CC0000 00019000 6.1.7600.16385
000F0000 rpcrt4.dll 76980000 6.1.7601.18205
SspiCli.dll 74AE0000 00060000 6.1.7601.18443
CRYPTBASE.dll 74AD0000 0000 C 000 6.1.7600.16385
LPK.dll 76470000 0000 has 000 6.1.7601.18177
USP10.dll 768E0000 0009D 000 1.626.7601.18454
Ole32.dll 75F00000 0015C 000 6.1.7601.17514
Msvcp90.dll 739F0000 0008E000 9.0.30729.6161
Msvcr90.dll 73DB0000 000 has 3000 9.0.30729.6161
74470000 00009000 6.1.7600.16385 VERSION.dll
IMM32. 00060000 60000 74 6.1.7601.17514 DLL
000CC000 76BB0000 MSCTF.dll 6.1.7600.16385
74320000 00021000 6.1.7600.16385 Ntmarta.dll
Wldap32.dll 00045000 763E0000 6.1.7601.17514
Uxtheme.dll 6EB20000 00080000 6.1.7600.16385
NiMaxUI.dll 1C2D0000 00269000 4.6.0.49153
Msvfw32.dll 6BE30000 00021000 6.1.7601.17514
73970000 00032000 6.1.7601.17514 WINMM.dll
Comctl32.dll 73E80000 0019E000 6.10.7601.17514
Wsock32.dll 73DA0000 00007000 6.1.7600.16385
74DC0000 00035000 WS2_32.dll 6.1.7601.17514
NSI.dll 75AA0000 00006000 6.1.7600.16385
Oleaut32.dll 76580000 0008F000 6.1.7601.17676
6D8E0000 003 Mfc90u.dll has 1000 9.0.30729.6161
MSIMG32.dll 6EBA0000 00005000 6.1.7600.16385
dwmapi.dll 6EB00000 00013000 6.1.7600.16385
MFC90ENU. DLL 6EAF0000 0000 D 000 9.0.30729.6161
NiMaxRes.dll 1BFD0000 0007 has 000 4.6.0.49153
BtMmHook.dll 10000000 00038000 6.4.0.2900
PSAPI. DLL 76440000 00005000 6.1.7600.16385
DCIMAN32. DLL 6E1F0000 00006000 6.1.7601.18177
MXS.dll 1 B 240000 4.6.0.49152 0000F000
mxsutils.dll 1B4D0000 00041000 4.6.0.49152
Msvcp71.dll 7C3C0000 0007C 000 7.10.6030.0
7 360000 00056000 7.10.6030.0 Msvcr71.dll
mxsout.dll 1 B 400000 00075000 4.6.0.49152
64600000 00014000 4.257.3.0 nirpc.dll
Mswsock.dll 73A 90000 0003C 000 6.1.7601.18254
profapi.dll 76460000 0000B 000 6.1.7600.16385
mxMax.dll 1BF20000 00086000 4.6.0.49152
58000000 00240000 6.5.0.3005 AsstntUI.mxx
MFC80U. DLL 71210000 8.0.50727.6195 0010F000
MSVCR80.dll 0009B 000 8.0.50727.6195 72E50000
Comdlg32.dll 20000 75 0007B 000 6.1.7601.17514
71180000 00087000 8.0.50727.6195 Msvcp80.dll
ATL80. DLL 6BD70000 0001 B 000 8.0.50727.6195
MFC80ENU. DLL 730F0000 8.0.50727.6195 0000E000
59000000 00582000 6.5.0.3005 mxwTask.dll
00011000 74180000 6.1.7601.17887 Netapi32.dll
74170000 00009000 6.1.7601.17514 netutils.dll
74150000 00019000 6.1.7601.17514 srvcli.dll
wkscli.dll 74140000 6.1.7601.17514 0000F000
56000000 00148000 6.5.0.3005 mxwRCEng.dll
mxcal.mXX 1 A 110000 00056000 4.6.0.49152
mxcat.mXX 1BE20000 000AB000 4.6.0.49152
nidmfuiu.mXX 04360000 0010D 000 1.11.0.49152
NIPALU.dll 64000000 00057000 2.1025.3.0
64500000 00006000 2.1025.3.0 nipalut.dll
NIPAL32.dll 00007000 1F700000 2.1025.3.0
SETUPAPI.dll 76240000 0019D 000 6.1.7601.17514
CFGMGR32.dll 75DA0000 00027000 6.1.7601.17621
76220000 00012000 6.1.7601.17621 DEVOBJ.dll
6 280000 00031000 1.9.0.49152 nimdbgu.dll
6 000000 00017000 1.9.3.49152 niorbu.dll
nimstsu.dll 6E180000 0001 has 000 1.11.0.49152
nimhwcfu.dll 6DFD0000 000 B 6000 1.11.0.49152
6 050000 0001E000 1.9.0.49152 nidimu.dll
nimxdfu.dll 0003E000 1.10.0.49152 6D0F0000
nimxpu.dll 6E1B0000 0000 000 1.11.0.49152 B
Iphlpapi.dll 74280000 0001C 000 6.1.7601.17514
WINNSI. DLL 74270000 00007000 6.1.7600.16385
74B 40000 001BD000 11.0.9600.17126 WININET.dll
76A 70000 API-MS-Win-Downlevel-User32-L1-1-0.dll 00004000 6.2.9200.16492
770B 0000 API-MS-Win-Downlevel-shlwapi-L1-1-0.dll 00004000 6.2.9200.16492
75AB0000 API-MS-Win-Downlevel-Version-L1-1-0.dll 00004000 6.2.9200.16492
76430000 00003000 6.2.9200.16492 API-MS-Win-Downlevel-normaliz-L1-1-0.dll
normaliz. DLL 76450000 00003000 6.1.7600.16385
iertutil.dll 75AC0000 00219000 11.0.9600.17126
76610000 00005000 6.2.9200.16492 API-MS-Win-Downlevel-advapi32-L1-1-0.dll
76200000 00017000 6.1.7601.17514 USERENV.dll
nidmxfu.dll 04470000 0049F000 1.12.0.49152
nimru2u.dll 6EC70000 00044000 2.10.1.49152
nimmgluu.dll 69830000 0001E000 1.11.0.49152
nimercu.dll 6DFB0000 00019000 1.11.0.49152
MFC71. 00106000 140000 7 7.10.6101.0 DLL
MFC71ENU. 360000 5 0000E000 7.10.3077.0 DLL
niGPIBui.mxx B 6, 000000 0008E000 2.7.0.49152
niIVIui.mxx 02CE0000 000D 0000 4.2.0.49152
niPXIui.mxx A 671 0000 000BC000 2.1280.1.49152
niRemPXI.mxx 1 A 270000 00057000 4.6.0.49152
mxRmCfg.dll 1 has 000000 00090000 4.6.0.49152
niRMui.mxx 1AD70000 000FD000 4.6.0.49152
NISRLUI.mxx 6B 500000 00061000 3.4.0.49154
63800000 00010000 2.7.0.49152 NiSpyLog.dll
niSWui.mxx 1A3B0000 00072000 4.6.0.49152
niVISAui.mxx 63360000 0017D 000 4.1280.0.49152
62 30000 0002E000 4.1280.0.49152 niVISAres2.dll
RICHED32. DLL 40000 00006000 6.1.7601.17514 6FC
Riched20.dll 61F70000 00076000 5.31.23.1230
Wshtcpip.dll 73A 80000 00005000 6.1.7600.16385
nisysapi.dll 68 has 00000-000B 2000 5.5.2.49152
Dbghelp.dll 70F20000 000EB000 6.1.7601.17514
-------------------- -------- -------- ------------------Application: C:\Program Files (x 86) \National Instruments\MAX\NIMax.exe
User name: administrator
OS version: 6.1.7601 (Service Pack 1)
Exception code: C06D007E
Exception addr: 74E0C42DSender's address: 74E0C42D
Function name: RaiseException
Module name: KERNELBASE
Parameters: 00000000 00000001 0518FD84 C06D007E
Source file: (not available)Sender's address: 68A3C6F7
Function name: DllUnregisterServer
Module name: nisysapi
Parameters: 00000000 0518FD50 005F59B8 0000001E
Source file: (not available)Sender's address: 68A53D87
Function name: DllUnregisterServer
Module name: nisysapi
Parameters: 00000350 68A791B8 005F59B8 00000000
Source file: (not available)Sender's address: 68A0DC65
Function name: nisysInitDiagnosticsByValue
Module name: nisysapi
Parameters: 68A 01680 00000001 68A93BB8 FFFFFF01
Source file: (not available)Sender's address: 68A0DFC4
Function name: nisysInitDiagnosticsByValue
Module name: nisysapi
Parameters: 005E2C40 00000000 00000001 00000001
Source file: (not available)Sender's address: 68A 01698
Function name: nisysInitDiagnosticsByValue
Module name: nisysapi
Parameters: 005E2C40 00000000 00000001 00000001
Source file: (not available)Sender's address: 1BE27A73
Function name: mxGetProvider
Module name: mxcat
Parameters: 020469F0 02047084 0518FED0 1BE76CBA
Source file: (not available)Sender's address: 1BE30D2E
Function name: mxGetProvider
Module name: mxcat
Parameters: 02029FA8 02047748 0518FF34 1BE21D4C
Source file: (not available)Sender's address: 1BE35780
Function name: mxGetProvider
Module name: mxcat
Parameters: 00000000 00000000 02047818 020469F0
Source file: (not available)Sender's address: 1BE21D4C
Function name: (not available)
Module name: mxcat
Parameters: 02029FA8 1BE6264D 0518FF7C 73DD3433
Source file: (not available)Sender's address: 1BE21CDC
Function name: (not available)
Module name: mxcat
Parameters: 02030018 00000000 00000000 9192C45C
Source file: (not available)Sender's address: 73DD3433
Function name: endthreadex
Module name: MSVCR90
Parameters: 00000000 0518FF94 7607338A 02047818
Source file: (not available)Sender's address: 73DD34C7
Function name: endthreadex
Module name: MSVCR90
Parameters: 02047818 0518FFD4 77119F72 02047818
Source file: (not available)Sender's address: 7607338A
Function name: BaseThreadInitThunk
Name of the module: kernel32
Parameters: 02047818 00000000 00000000 775D5D69
Source file: (not available)Sender's address: 77119F72
Function name: RtlInitializeExceptionChain
Name of the module: ntdll
Parameters: 02047818 00000000 00000000 73DD345E
Source file: (not available)Sender's address: 77119F45
Function name: RtlInitializeExceptionChain
Name of the module: ntdll
Parameters: 02047818 00000000 00000000 73DD345E
Source file: (not available)If I could come with the OS discs for the thing, I think I'd do a new install of Windows 7.
Mike...
-
IMP-00017: statement failed with error ORACLE 1658:
# imp system/pass fromuser = touser = file=/disk1/Downloads/dmp/MI61015.dmp databaseName databaseName
Import: Release 11.2.0.2.0 - Production on Sat Oct 10 09:29:32 2015
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
Connected to: Oracle Database 11 g Express Edition Release 11.2.0.2.0 - 64 bit Production
Export file created by EXPORT: V11.02.00 by conventional means
import performed AL32UTF8 and AL16UTF16 NCHAR character set
Customer export uses the (possible character set conversion) US7ASCII character set
. imported objects from databaseName databaseName
. . import of table 'ACCOUNTS' 12 rows imported
. . table import 'AGREEMENTS' 6 imported lines
. . importing table "ASSIGNEDDEPT" 0 rows imported
. . import of 2713 lines imported from the table 'BULKSAVEDCVS '.
. . import of table "CERTIFICATION" 7 lines imported
. . importing table "COMMONDOCS" 0 rows imported
. . table import 'COUNTRY' 256 imported lines
. . importing table "CVCATEGORIES" 6 imported lines
. . table 'CVCERTIFICATION' import 92 lines imported
. . importing table "CVCHECKAGAIN" 56 imported lines
. . importing table "CVDETAILS".
IMP-00058: ORACLE error 1653
ORA-01653: unable to extend table databaseName.CVDETAILS 8192 in the SYSTEM tablespace
IMP-00028: partial import of the restored previous table: 20960 restored lines
. . table 'CVLICENSE' import 756 lines imported
. . importing table "CVPROPERTIES" 69752 imported lines
. . rows in table 'CVSPECIALTY' import imported 6159
. . import of 1701 lines imported from the table 'CVVIEWS '.
. . "DEPT" table import 2 lines imported
IMP-00017: statement failed with error ORACLE 1658:
' CREATE TABLE 'DETAILRESUME' ("D_ID" (14: 0), THE NUMBER OF 'CV_ID' (14: 0), "").
"NUMBER OF 'CAT_ID' (14: 0), 'DETAILRESUME' CLOB) INITRANS PCTUSED 40 PCTFREE 10.
1 MAXTRANS 255' STORAGE ' (INITIALS 67108864 THEN 1048576 MINEXTENTS 1 FREELIST).
"S 1 FREELIST GROUPS 1 DEFAULT USER_TABLES) TABLESPACE 'SYSTEM' LOGGING NOCO.
"COMPRESS LOB ("DETAILRESUME") AS STORE BASICFILE (TABLESPACE 'SYSTEM' ENABLE '.
"CHUNK 8192 PCTVERSION 10 NOCACHE LOGGING STORAGE (INITIAL 6" ONLINE STORAGE ".
"THE NEXT 5536 1048576 MINEXTENTS 1 FREELISTS 1 FREELIST GROUPS 1 USER_TABLES OF."
"FAULT)).
IMP-00003: ORACLE error 1658
ORA-01658: unable to create the INITIAL extent for segment in tablespace SYSTEM
. . importing table "DOCCATEGORIES" 0 rows imported
. . table 'EMPLOYERORAGENT' import 62 lines imported
. . table 'FAQ' import 4 lines imported
. . importing table "FOLDERCVS" 6 imported lines
. . table import 'FOLDERS' 3 imported lines
. . "JOBDETAILS" table import 84 lines imported
. . table 'JOBKEYWORDS' import 190 lines imported
. . table 'JOBPOSTINGS' import 84 lines imported
. . import of table 'JOBPROPERTIES' 89 imported lines
. . table 'JOBRESPONSES' import 64019 lines imported
. . table import "LICENSE" 20 imported lines
. . import of table 'MESSAGES' 0 rows imported
. . table import 'NEWS' 0 rows imported
. . table import "SPECIALTY" 301 lines imported
. . table import "STAFF" 12 rows imported
. . table import 'TICKET' 0 rows imported
. . importing table "TICKETCATEGORY" 0 rows imported
. . importing table "TICKETTEMPLATES" 0 rows imported
. . import of rows in table 'USERS' 4410 imported
About to activate the constraints...
Import completed successfully with warnings.
#
Please advise.
Thank you in anticipation
Christy H. wrote:
How can I increase its space?
That drive you some people to knowledge, but you can't make them think.
-
ORA-17628: error Oracle 19505 returned by remote Oracle - Dup Active Server
Hi all
I'm doing a duplicate RMAN of a 11.2.0.4 database to another host on a different IP address.
Goal
SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
Auxiliary (nomount)
SQL> select * from v$version; BANNER -------------------------------------------------------------------------------- Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
I've added an entry static listener to the file on the server to THE listener and start the instance in nomount.
(SID_LIST = (SID_DESC = (GLOBAL_DBNAME = IST_11G) (ORACLE_HOME = /devdb3/u01b/app/oracle/product/11.2.0.4) (SID_NAME = IST_11G) )
TNSNAMES on the server to THE:
points to the TARGET server:
IST_11G_192 = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.0.48)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = IST_11G)(UR=A)))
the server pointing to THE
IST_11G = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.21.64.72)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = IST_11G)(UR=A)))
TNSNAMES on the TARGET server:
IST_11G_NEW = (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 172.21.64.72)(PORT = 1521))(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = IST_11G)(UR=A)))
instance pFile to THE:
Using parameters in Server pfile /devdb3/u01b/app/oracle/product/11.2.0.4/dbs/initIST_11G.ora-side
Parameters of the system with default values:
db_name = "IST_11G".
I have sftp file password above and named correctly.
Check the connections
--from target $ sqlplus sys/xxx@IST_11G_NEW as sysdba SQL*Plus: Release 11.2.0.4.0 Production on Tue Jun 30 08:32:10 2015 Copyright (c) 1982, 2013, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production With the Partitioning, OLAP, Data Mining and Real Application Testing options SQL>
Since in THE
$ sqlplus sys/xxx@IST_11G_192 as sysdba
SQL * more: Release 11.2.0.4.0 Production on Mar 30 08:32:32 June 2015
Copyright (c) 1982, 2013, Oracle. All rights reserved.
Connected to:
Oracle Database 11 g Enterprise Edition Release 11.2.0.4.0 - 64 bit Production
With partitioning, OLAP, Data Mining and Real Application Testing options
SQL >
So I checked that I have two means of connection, my at THE start and I can connect.
Here's my RMAN command (Note: the TARGET servers and have the same host name, don't ask...) "This is why we use the IP address in the TNSNAMES):
connection:
rman target sys/xxx@IST_11G_192 auxiliary sys/xxx@IST_11G | tee /home/oracle/IST_11G_duplicate.log
run { duplicate target database to IST_11G from active database NOFILENAMECHECK spfile set DB_FILE_NAME_CONVERT = '/devdb3/u01/oradata/IST_11G','/devdb3/u02d/oradata/IST_11G','/devdb3/u02/oradata/IST_11G','/devdb3/u02d/oradata/IST_11G' set LOG_FILE_NAME_CONVERT = '/devdb3/u01/oradata/IST_11G/','/devdb3/u03r/IST_11G_DEVDB3/' set control_files = '/devdb3/u03r/IST_11G_DEVDB3/controlfile/IST_11G_ctl1.ctl', '/devdb3/u04r/IST_11G_DEVDB3/controlfile/IST_11G_ctl2.ctl' set audit_file_dest = '/devdb3/u01b/app/oracle/product/11.2.0.4/rdbms/audit/' set diagnostic_dest = '/devdb3/u01b/app/oracle/' set log_archive_dest = '/devdb3/u05f/fast_recovery/IST_11G/archivelogs/' set MEMORY_MAX_TARGET='1G' set MEMORY_TARGET='1G'; }
$ rman target sys/xxx@IST_11G_192 auxiliary sys/xxx@IST_11G | tee /home/oracle/IST_11G_duplicate.log Recovery Manager: Release 11.2.0.4.0 - Production on Tue Jun 30 08:37:02 2015 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. connected to target database: IST_11G (DBID=525645852) connected to auxiliary database: IST_11G (not mounted) RMAN> run 2> { 3> duplicate target database to IST_11G from active database NOFILENAMECHECK spfile 4> 5> 6> set DB_FILE_NAME_CONVERT = '/devdb3/u01/oradata/IST_11G','/devdb3/u02d/oradata/IST_11G','/devdb3/u02/oradata/IST_11G','/devdb3/u02d/oradata/IST_11G' set LOG_FILE_NAME_CONVERT = '/devdb3/u01/oradata/IST_11G/','/devdb3/u03r/IST_11G_DEVDB3/' set control_files = '/devdb3/u03r/IST_11G_DEVDB3/controlfile/IST_11G_ctl1.ctl', '/devdb3/u04r/IST_11G_DEVDB3/controlfile/IST_11G_ctl2.ctl' 7> set audit_file_dest = '/devdb3/u01b/app/oracle/product/11.2.0.4/rdbms/audit/' 8> set diagnostic_dest = '/devdb3/u01b/app/oracle/' set log_archive_dest = '/devdb3/u05f/fast_recovery/IST_11G/archivelogs/' 9> set MEMORY_MAX_TARGET='1G' set MEMORY_TARGET='1G'; 10> } 11> 12> Starting Duplicate Db at Jun 30 2015 08:37:10 using target database control file instead of recovery catalog allocated channel: ORA_AUX_DISK_1 channel ORA_AUX_DISK_1: SID=216 device type=DISK contents of Memory Script: { backup as copy reuse targetfile '/devdb3/oracle/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora' auxiliary format '/devdb3/u01b/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora' ; sql clone "alter system set spfile= ''/devdb3/u01b/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora''"; } executing Memory Script Starting backup at Jun 30 2015 08:37:11 allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=365 device type=DISK RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of Duplicate Db command at 06/30/2015 08:37:12 RMAN-05501: aborting duplication of target database RMAN-03015: error occurred in stored script Memory Script RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/30/2015 08:37:12 ORA-17628: Oracle error 19505 returned by remote Oracle server RMAN>
I can't understand why I'm getting ORA-17628: error Oracle 19505 returned by remote Oracle server.
So, I try one of the commands connecting memory se scripts to check if was not a problem with my execution block.
backup copy reuse targetfile ' / devdb3/oracle/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora' auxiliary format ' / devdb3/u01b/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora';
$ rman target sys/sys_IST_11G@IST_11G_192 auxiliary sys/sys_IST_11G@IST_11G | tee /home/oracle/IST_11G_duplicate.log Recovery Manager: Release 11.2.0.4.0 - Production on Tue Jun 30 08:41:00 2015 Copyright (c) 1982, 2011, Oracle and/or its affiliates. All rights reserved. connected to target database: IST_11G (DBID=525645852) connected to auxiliary database: IST_11G (not mounted) RMAN> backup as copy reuse targetfile '/devdb3/oracle/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora' auxiliary format '/devdb3/u01b/app/oracle/product/11.2.0.4/dbs/spfileIST_11G.ora'; Starting backup at Jun 30 2015 08:41:15 using target database control file instead of recovery catalog allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=365 device type=DISK RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03009: failure of backup command on ORA_DISK_1 channel at 06/30/2015 08:41:17 ORA-17628: Oracle error 19505 returned by remote Oracle server RMAN>
Same mistake. Nothing is written for the journal of alerts. IM starting to pull the hair is left on my head out and people start screaming for this database. I could go back to datapump but I want to understand this. Any help would be very much appreciated.
Thank you.
Yes, although this:
connected to target database: IST_11G (DBID = 525645852)
connected to the auxiliary database: IST_11G (unassembled)
can say you that RMAN you connected the two separate databases, the process, instances should do research each other using tnsnames file entries. Thus, incorrect tnsnames entries can have one instance pointing to itself.
Hemant K Collette
-
Hello Sir: I use a generator of form of oracle 10g and I want to search on two dates using between.how it is possible.
I guess its text fields are the date data type.
-
Hello when I compile my composite in Jdeveloper, I get this error as "'
"I also configured MDS in the range of resources. When I have expand it just shows that the "loading".
MDSConnection
-applications
-Project1
-xsd
Loading...
Can you please tell me if any class file or JAR is missing?
Thanks in advance!
This problem is due to file incorrect mdsrt.jar. It is located at jdevloper/oracle_common/modules/oracle.mds_11.x.x.
This file must be oracle.mds.net.ORAMDSURLInfoProvider.class. If this is not available, then get a file mdsrt.jar with this class. replace and restart the Jdev. This issue will go away.
However, the main reason behind this is incorrect laying of jDev. You may encounter the following errors.
Kind regards
Vikrant Korde.
-
ADF Error: oracle.mds.exception.MDSRuntimeException: MDS-00168
Hi all
Another question, we are faced with adf ui error:
ADF Error: oracle.mds.exception.MDSRuntimeException: MDS-00168
Error ' oracle.mds.exception.MDSRuntimeException: MDS-00168 "when for deployment ADF application to integrated Weblogic instance of JDeveloper 11g
Help, please.
Hello
This is due to a known issue for JDeveloper and ADF 11 g.
To initialize the components ADFShare in a web environment, the oracle.adf.share.http.ServletADFContext must be initialized by request.
Solution:
Add the definition of the ServletADFContextFilter in the web.xml:
ServletADFContextFilter oracle.adf.share.http.ServletADFFilter ServletADFContextFilter /* REQUEST FORWARD -
APP-FND-01564: Error ORACLE 12154 in AFPCOA
Hi all
I just got error when you run the FNDLOAD
-------------------------------------------------------------------------------------------------------------------------
I:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\Bin > FNDLOAD 0 APPS/APPS@VIS DOWNLOAD %FND_TOP%/patch/115/import/afmdmsg.lct %JAVA_TOP%/oaf_axf_messages.ldt
APP-FND-01564: Error ORACLE 12154 in AFPCOA
Cause: AFPCOA failed due to the ORA-12154: TNS: could not resolve the connect VAT registration
Specified IER
.
The SQL statement being executed at the time of the error was: and was executed
from the file.
-------------------------------------------------------------------------------------------------------------------------
My version of the EBS is 12.1 of the EBS. Looks like there is no resulting this error log file.
Could someone help me with this problem?
Thank you very much
GumasI just got error when you run the FNDLOAD
-------------------------------------------------------------------------------------------------------------------------
APPS/APPS@VIS 0 I:\oracle\VIS\apps\apps_st\appl\fnd\12.0.0\Bin>FNDLOAD DOWNLOAD %FND_TOP%/patch/115/import/afmdmsg.lct %JAVA_TOP%/oaf_axf_messages.ldtAPP-FND-01564: Error ORACLE 12154 in AFPCOA
Cause: AFPCOA failed due to the ORA-12154: TNS: could not resolve the connect VAT registration
Specified IER
.The SQL statement being executed at the time of the error was: and was executed
from the file.-------------------------------------------------------------------------------------------------------------------------
My version of the EBS is 12.1 of the EBS. Looks like there is no resulting this error log file.
Could someone help me with this problem?
Please make sure that you source the file env before running the command FNDLOAD.
Above the name of your database?
FNDLOAD 0 APPS/APPS@VIS DOWNLOAD %FND_TOP%/patch/115/import/afmdmsg.lct %JAVA_TOP%/oaf_axf_messages.ldt
Please change the above to what follows after the supply env file:
FNDLOAD APPS/APPS 0 DOWNLOAD %FND_TOP%/patch/115/import/afmdmsg.lct %JAVA_TOP%/oaf_axf_messages.ldt
Thank you
Hussein -
Hello
I have this error to replicate, but can't as Im not aware of the effective implementation...
< error > < oracle.soa.bpel.engine.delivery > < BEA-000000 >
< < DeliveryHandler::initialRequestAnyType > no response not found for the answer for the conversation id
urn: 965BA1C05C6711E19F2FB7716E234E2B >
Guru, suggestions?I think that I did not change anything. Anyway, you can lift a SR with support.
Kind regards
Anuj -
APP-FND-01564: Error ORACLE 1422 in FDFGVD
Hi all
I set up the de FACTO forces in the form of respect. It works very well, while creating new compliants. But if we try to find the existing compliant number to "find Service requests. I get the below error.
FLEX-NO UNIQUE VALUE
--------------------------------------------------------------
APP-FND-01564: Error ORACLE 1422 in FDFGVD
Cause: FDFGVD failed due to the ORA-01422: exact fetch returns more than number of lines.
The SQL statement being executed at the time of the error was: SELECT the VALUE of A.DIVISION, A.DIVISION, A.AREA | A.DIVISION |' '|| DESCRIPTION OF A.LOC, NVL ("N", 'N'), (TO_NUMBER (NULL),-1), NULL, NVL NVL ('Y', 'Y'), NVL (TO_CHAR (TO_DATE (NULL), 'J'), 0), NVL (TO_CHAR (TO_DATE (NULL), 'J'), 0) IN (SELECT * FROM XXCMW.) CMW_DIVISION) A WHERE 1 = 1 AND A.DIVISION =: X and was executed from the file & ERRFILE.
Please note that the above FDF configuration works very well in the test case. We get the error only in Production instance.
Please can someone give me the solution to fix this problem.
Kind regards
Raj.Hello
Please note that the above FDF configuration works very well in the test case. We get the error only in Production instance.
Did you follow the same steps to configure the same production? If Yes, have you tried migrating the configuration using FNDLOAD and see if that helps?
Cause: FDFGVD failed due to the ORA-01422: exact fetch returns more than number of lines
Have you checked the data? --(OERR: ORA 1422 «exact fetch renvoie plus de demandé le nombre de lignes» [18827.1 ID])
The test instance is identical to the production (in terms of patches, configuration, data.. etc)?
Thank you
Hussein -
ERROR: ORACLE prepare error: ORA-00936: lack of expression
Hello
I am required to run the 'pass-through' Oracle SQL, to extract data from tables in the SAS for processing and handling. My code (attached) reads and writes (runs) but with zero records to test first. I can't get beyond the error to prepare.
The request is just like other queries that seem to work, but I can't get past this prepare error. I have no other access to individauls with an adequate knowledge of the PL SQL and as a last stop hoped others in the forum could quickly identify the source of the error.
Thank you very much in advance for any help.
Jeff
_______________________________________
1; *'; * « ; * / ; Quit; execution risk;
2 OPTIONS NUMPAGE = MIN;
3% LET _CLIENTTASKLABEL = % NRBQUOTE (rx_biplr_v3_2);
4% LET _EGTASKLABEL = % NRBQUOTE (rx_biplr_v3_2);
5% LET _CLIENTPROJECTNAME = %NRBQUOTE();
6% LET _SASPROGRAMFILE =;
7
8 ODS CLOSE SUBJECT;
NOTE: Some of your options or statements will not be managed with the Activex or Java Series devices. Chart by default for these
drivers may be different from other SAS/GRAPH device drivers. For more information, please contact Technical Support.
9 OPTIONS DEV = ACTIVEX;
10 EGHTML TEMP FILE NAME;
NOTE: Writing, body HTML (EGHTML) file: EGHTML
11 ODS HTML(ID=EGHTML) FILE = EGHTML ENCODING = 'utf - 8' STYLE = EGDefault.
11. STYLESHEET=(URL="file:///C:/program%20Files/SAS/shared%20Files/BIClientStyles/EGDefault.CSS")
11. ATTRIBUTES = ("http://www2.sas.com/codebase/graph/v91/sasgraph.exe"="CODE") NOGTITLE NOGFOOTNOTE GPATH = & sasworklocation
11.
12
gaccessible 13%;
14 /********************************************************/
15 * RX_BIPLR_V3. SAS;
16 /********************************************************/
17
18 dm 'journal clearly out; delete ";
19 linesize options = 120;
20 option obs = 0 NoReplace;
21
22 ****************************************************************************************;
23 * date reviewed programmer in WHICH WAS MADE;
24 *----- -------------- ------------ -----------------------------------------;
25 * 2005 creation of David Boyd program to the test population;
26 *;
27 * 06/02/2006 Ivon Jones changed to include the whole of the population;
28 *;
29 * 20/07/2006 Ivon Jones identified the holdout data elements;
30 * or inclusion in the consolidation with;
31 * Robin report;
32 *;
33 * 18/08/2006 Ivon Jones updated specific therapeutic Classes.
34 * 10 - 2009 J Shaf - changed to extract actual or potential of UBH bipolar Dx and medical claims.
35 ****************************************************************************************;
36
37
38
39 * % let allclmorgn = (', 'A'); / * claims origin code * /.
40% would let begdate ='01 SEP 2009;
41% let enddate = 30 SEP 2009 would be;
42% let q = %str(%');
43
44
45 data _null_;
46. call symput ("fdos", put (intnx ('month' ' and begdate "d,-27," starts"), date9.));
47 call symput ('ldos', put (intnx ('months', ' and enddate "d-0, 'end'" "), date9.));
48, run;
NOTE: DATA statement used (total duration of processes):
time real 0.01 seconds
2 the system SAS 11:44 Friday, October 30, 2009
time CPU 0.01 seconds
49
50
51
52 **************************************************************;
53 *? Data _null_ stage allows to create a macro variable to;
54 * year and month, based on the macro ldos variable in the data;
55 * step up? ;
56 **************************************************************;
57
58
59 data _null_;
If 60 months ("& ldos" d) < 10
61, then call symput ("yr_mo", compress (year ("& ldos" d) |)) '0' || months ("& ldos" d)));
62 other call symput ("yr_mo", compress (year ("& ldos" d) | months ("& ldos" d)));
63 to run;
NOTE: The numeric values were converted to character values in the locations given by: (Line): (Column).
61:39 61:64 62:39 62:57
NOTE: DATA statement used (total duration of processes):
time real 0.01 seconds
time processor 0.01 seconds
64
65 * make % & biplr_dx;
position 66% & begdate;
' 01 SEP 2009 would be
67% put & enddate;
30 SEP 2009 would be
68% put & fdos;
JUNE 1, 2007
69% put & ldos;
SEPTEMBER 30, 2009
70% put & q;
'
71
72
73 libname biplr ' / home/jshafi01/projects/adhoc/biplr_dprsn/data ';
NOTE: Libref BIPLR has been awarded with success as follows:
Engine: V9
Physical name: / home/jshafi01/projects/adhoc/biplr_dprsn/data
74 rosdwp libname = oracle user "& oracle_user." pass = "& oracle_pass." ' buffsize = 32767 path = "rosdwp"; "
NOTE: Libref ROSDWP has been awarded with success as follows:
Engine: ORACLE
Physical name: rosdwp
75
work.biplr_up_v1 76 data;
mbr_id length 77 attrib = $ 26;
78 the value biplr.biplr_ubh_med_v1;
79 to be performed;
NOTE: There were 0 read comments from the BIPLR data set. BIPLR_UBH_MED_V1.
NOTE: All data WORK. BIPLR_UP_V1 has 0 comments and variables 1.
NOTE: DATA statement used (total duration of processes):
time real 0.01 seconds
3 the system SAS 11:44 Friday, October 30, 2009
time processor 0.01 seconds
80
81 proc content;
82 to be performed;
NOTE: PROCEDURE used CONTENT (total duration of processes):
time real 0.03 seconds
time CPU 0.03 seconds
83
84 proc datasets
85 = rosdwp nolist library.
86. delete biplr_up_v1;
87 of quitting;
NOTE: The removal of ROSDWP. BIPLR_UP_V1 (memtype = DATA).
NOTE: PROCEDURE used DATASETS (time Total of processes):
time real 3.74 seconds
time CPU 0.03 seconds
88
89 proc datasets
90 = work nolist library.
copy 91 = rosdwp move;
92 select biplr_up_v1;
93 of quitting;
NOTE: Move WORK. BIPLR_UP_V1 to ROSDWP. BIPLR_UP_V1 (memtype = DATA).
NOTE: Variable labels SAS, formats and lengths are not written to the DBMS tables.
NOTE: There were 0 read comments from the WORKING data set. BIPLR_UP_V1.
NOTE: All the data ROSDWP. BIPLR_UP_V1 has 0 comments and variables 1.
NOTE: PROCEDURE used DATASETS (time Total of processes):
real 0.32 seconds
time CPU 0.04 seconds
94
95
96
97 *****************************************************************************;
98
99 * execute (commit) by rosdwp
100 ******************************************************************************;
101
102
103 proc SQL noprint.
104, connect to oracle as rosdwp (user = "" & oracle_user. "password =" "& oracle_pass ' buffsize = 32767 path ="rosdwp")
104. preserve_comments);
run 105 (alter session set nls_date_format = 'ddmonyyyy') by rosdwp;
CREATE table biplr_rx like 106
107 SELECT
mrb_id 108,
pcp_spc 109,
rx_date 110,
4 the system SAS 11:44 Friday, October 30, 2009
Mark 111,
generic, 112
113 ahfs_cd
ahfs_dsc 114,
lbl 115,
strngth 116,
UNT 117,
spc_tx_cls_cd 118,
119 spc_tx_cls_dsc,
GCN 120,
rx_num 121,
rx_ingrd 122,
rx_paid 123,
rx_cnt 124,
rx_qty 125,
rx_day 126
127 rosdwp CONNECTION
128 (SELECT
129, middle of the year. UNIQ_MBR_ID as mrb_id,
130 DB. PRVDR_SPCLTY_DESC as pcp_spc,
FCP 131. LAST_SRVC_DT as rx_date,
132 JJ. BRAND_NAME as mark,
133 JJ. GNRC_NAME as generic,
134 JJ. AHFS_THRPTC_CLS_CD as ahfs_cd,
DD 135. AHFS_THRPTC_CLS_DESC as ahfs_dsc,
136 JJ. LABEL_NAME as lbl,
137 JJ. STRNGTH_NUM as strngth
138 JJ. STRNGTH_UNIT_DESC as unt,
139 JJ. SPECF_THRPTC_CLS_CD as spc_tx_cls_cd,
140 DD. SPECF_THRPTC_CLS_DESC as spc_tx_cls_dsc,
141 JJ. GCN_NUM as gcn,
FCP 142. PRSCRPTN_NUM as rx_num,
SUM of 143 (FCP. INGRDNT_AMT) as rx_ingrd,
SUM of 144 (FCP. PD_AMT) as rx_paid,
$ 145 (FCP. UNIT_SRVC_CNT) as rx_cnt,
SUM of 146 (FCP. DSPNSD_QTY) as rx_qty,
SUM of 147 (FCP. DAY_SUPLY_CNT) as rx_day
148
149 PHRMCY_CLM_FACT pcf,
150 MBR_ID_DMNSN environment,
151 DRUG_DMNSN dd,
152 PRVDR_DMNSN pd,
153 biplr_up_v1
154. WHERE THE
(155)
156 (biplr_up_v1.mbr_id = MBR_ID_DMNSN. UNIQ_MBR_ID) and
157 (PHRMCY_CLM_FACT. FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN. FINL_CLM_KEY) AND
158 (PHRMCY_CLM_FACT. MBR_KEY = MBR_ID_DMNSN. MBR_KEY) and
159 (PHRMCY_CLM_FACT. BNFT_KEY = MBR_BNFT_DMNSN. BNFT_KEY) and
160 (PHRMCY_CLM_FACT. DRUG_KEY = DRUG_DMNSN. DRUG_KEY) and
161 (PHRMCY_FINL_CLM_DMNSN. CLM_ORGN_CD IN (', 'A')) AND
162 (PHRMCY_CLM_FACT. LAST_SRVC_DT BETWEEN q. & fdos. & q and & q. & ldos. & q)
163)
164 Group By
165 mi. UNIQ_MBR_ID,
166 pd. PRVDR_SPCLTY_DESC,
FCP 167. LAST_SRVC_DT,
168 JJ. BRAND_NAME,
5 the system SAS 11:44 Friday, October 30, 2009
169 JJ. GNRC_NAME,
170 JJ. AHFS_THRPTC_CLS_CD,
171 JJ. AHFS_THRPTC_CLS_DESC,
172 JJ. LABEL_NAME,
173 JJ. STRNGTH_NUM,
174 JJ. STRNGTH_UNIT_DESC,
175 JJ. SPECF_THRPTC_CLS_CD,
176 JJ. SPECF_THRPTC_CLS_DESC,
177 JJ. GCN_NUM,
FCP 178. PRSCRPTN_NUM
179);
ERROR: ORACLE prepare error: ORA-00936: lack of expression. SQL statement: SELECT middle. UNIQ_MBR_ID as mrb_id,
RDL PRVDR_SPCLTY_DESC like pcp_spc, FCP. LAST_SRVC_DT as rx_date, JJ. BRAND_NAME as brand, JJ. GNRC_NAME as generic,
DD. AHFS_THRPTC_CLS_CD like ahfs_cd, JJ. AHFS_THRPTC_CLS_DESC as ahfs_dsc, JJ. LABEL_NAME as lbl, JJ. STRNGTH_NUM as
strngth, JJ. STRNGTH_UNIT_DESC as unt, JJ. SPECF_THRPTC_CLS_CD as spc_tx_cls_cd, JJ. SPECF_THRPTC_CLS_DESC as
spc_tx_cls_dsc, JJ. GCN_NUM as gcn, FCP. PRSCRPTN_NUM as rx_num, SUM (FCP. INGRDNT_AMT) as rx_ingrd, SUM (FCP. PD_AMT)
as rx_paid, SUM (FCP. UNIT_SRVC_CNT) as rx_cnt, SUM (FCP. DSPNSD_QTY) as rx_qty, SUM (FCP. DAY_SUPLY_CNT) as rx_day
OF PHRMCY_CLM_FACT pcf, MBR_ID_DMNSN mi, DRUG_DMNSN JJ, pd of the PRVDR_DMNSN, biplr_up_v1 () WHERE the
(biplr_up_v1.mbr_id = MBR_ID_DMNSN. UNIQ_MBR_ID) and (PHRMCY_CLM_FACT. FINL_CLM_KEY =
PHRMCY_FINL_CLM_DMNSN. FINL_CLM_KEY) AND (PHRMCY_CLM_FACT. MBR_KEY = MBR_ID_DMNSN. MBR_KEY) and
(PHRMCY_CLM_FACT. BNFT_KEY = MBR_BNFT_DMNSN. BNFT_KEY) and (PHRMCY_CLM_FACT. DRUG_KEY = DRUG_DMNSN. DRUG_KEY) and
(PHRMCY_FINL_CLM_DMNSN. CLM_ORGN_CD IN (', 'A')) AND (PHRMCY_CLM_FACT. LAST_SRVC_DT BETWEEN ' 01 JUN 2007"
and 30 SEP 2009') Group By mi. UNIQ_MBR_ID, pd. PRVDR_SPCLTY_DESC, FCP. LAST_SRVC_DT, JJ. BRAND_NAME,
DD GNRC_NAME, JJ. AHFS_THRPTC_CLS_CD, JJ. AHFS_THRPTC_CLS_DESC, JJ. LABEL_NAME, JJ. STRNGTH_NUM,
DD STRNGTH_UNIT_DESC, JJ. SPECF_THRPTC_CLS_CD, JJ. SPECF_THRPTC_CLS_DESC, JJ. GCN_NUM, FCP. PRSCRPTN_NUM.
NOTE: PROC SQL set NOEXEC option and will continue to check the syntax of the instructions.
180 run (drop table biplr_up_v1) in rosdwp;
NOTE: Statement is not executed because the NOEXEC option.
181 disconnect of rosdwp;
NOTE: Statement is not executed because the NOEXEC option.
182 of quitting;
NOTE: The SAS system is stopped at this stage of processing errors.
NOTE: PROCEDURE used SQL (total duration of processes):
time real 0.14 seconds
time CPU 0.03 seconds
183
184(1) assuming that LAST_SRVC_DT is a column of PHRMCY_CLM_FACT, to precede the table alias "FCP" rather than the full table name. If a table alias is specified in the FROM clause, it should be used rather than the full table name when you reference the columns.
2) there are two tables in the WHERE clause that do not appear in the FROM clause:PHRMCY_FINL_CLM_DMNSN
MBR_BNFT_DMNSNuser12142482 wrote:
Hello again,Wish Oracle was a bit more informative. Uses an Institute of SAS product called Enterprise Guide. A "hot fix" has been installed to solve a problem that the product appears unable to save the latest version of the revised code changes (hence "BETWEEN between" remaining even after an earlier edition). In any case, with the change, now get this error:
«ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT".» ' LAST_SRVC_DT': invalid identifier. (The log file is displayed below)
-The-Les restes remains of the error, no matter if code "pass" is used to move the date range to Oracle (which seems correct to the log output below that I believe), or if I hard code the date range in the query SQL PL itself.
-L' preparation error always appears at the end of the internal SELECTION.
-L' error of preparation remain, with or without the GROUP BY clause.Is there something else I'm missing? Someone suggested a reserve word - but other versions of the ANSI SQL standard, I don't see that is the case. I went to Support SAS and SAS list serve to the University of Georgia, but nothing definite from these sources. Have requested either able to run Oracle directly, outside this SAS Institute product - process.
Any suggestions are greatly appreciated. Thank you to all the world very much.
Jeff
150 OF
151 PHRMCY_CLM_FACT pcf,
152 MBR_ID_DMNSN environment,
153 DRUG_DMNSN dd,
154 PRVDR_DMNSN pd,
155 BIPLR_UP_V1 BLPR2
156. WHERE THE
157 (BIPLR_UP_V1.mbr_id = MBR_ID_DMNSN. UNIQ_MBR_ID) and
158 (PHRMCY_CLM_FACT. FINL_CLM_KEY = PHRMCY_FINL_CLM_DMNSN. FINL_CLM_KEY) AND
159 (PHRMCY_CLM_FACT. MBR_KEY = MBR_ID_DMNSN. MBR_KEY) and
160 (PHRMCY_CLM_FACT. BNFT_KEY = MBR_BNFT_DMNSN. BNFT_KEY) and
161 (PHRMCY_CLM_FACT. DRUG_KEY = DRUG_DMNSN. DRUG_KEY) and
162 (PHRMCY_FINL_CLM_DMNSN. CLM_ORGN_CD IN (', 'A')) AND
163 (PHRMCY_CLM_FACT. BETWEEN LAST_SRVC_DT & q. & fdos. & q and q & ldos. & q)
(164);
ERROR: ORACLE prepare error: ORA-00904: "PHRMCY_CLM_FACT." "' LAST_SRVC_DT ': invalid identifier. SQL statement: -
RMAN-06004: error ORACLE recovery catalog database: RMAN-20001: target
Hello
RMAN-00571: ===========================================================
RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
RMAN-00571: ===========================================================
RMAN-03002: failure of the backup command to 2009-03-31 21:59:24
RMAN-03014: implicit recovery catalog Resync failed
RMAN-06004: error ORACLE recovery catalog database: RMAN-20001: target not found in the recovery catalog database
I get the above error while taking backup RMAN Level0. I am able to connect to the database of the catalogue without any problem.
I already have this registry database command in RMAN prompt. Now I am able to see backup list but I don't know how that DB asking to sign up for today. Until yesterday, the backups were running fine btu today his application to enter the catalog DB.
Here we manually to connect the catalogue in this way
rman target $ /.
RMAN > catalog connection rmanuser/password @ < globalcatalogDB >
connected.
After that if I give this command means...
RMAN > backup from the list of database;
I get the error I pasted at the earliest.
Thanks in advance.If you do not have a catalog, you need not to save the database. Rely you only on the target database controlfile. If you use a catalog, you must save the target database, but only once. If you sometimes use a catalog - and sometimes not--the appropriate command is RESYNC (although in many cases RMAN automatically done).
Werner
Maybe you are looking for
-
SL510 found 2 adapters wifi?
Hi, my SL510 work very well, but I just want to know, when I opened to replace the keyboard, I found 1 wifi card mini Roger intel N1000 with antenna and rear is another card mini wifi broadcom 802.11 g without antenna. My question is: what function i
-
OfficeJet 5740: Scan to network folder
I can't scan to a network with my Officejet 5740 folder as I do with the 8620. This is a limitation of the equipment and in this case when I remove this printer those that support this feature.
-
Warning message about low memory on drive C
Sometimes I don't turn my computer off during the night. I just turn off the monitor. This morning when I got up to use the PC, there was an a warning box yellow popup that I was running very low on memory on my C drive. The only other time I've seen
-
How to use the modem on WRT54GS port
Hi, I have a network like this: ADSL-> THOMSON wired modem-> switch wired LinkSys SR2016 -> wired router / wireless LinkSys WRT54GS My problem is with the connecction between the SR2016-> WRT54GS. As you probably know the WRT54GS has 5 ports, is cal
-
I can't open files EXE Application on my computer, it changed the defult for winRAR archiver
My operating system is windows 7 ultimate. Im not dumb with computers, but I just can't get around this problem. I can't open files EXE Application on my computer, it changed the defult to winRAR archiver. Thus, every program you open is saying he ca