Generate the event when the focus lost

Similar Questions

• Capture of key press on when the focus is not on VI. (event does not work).

  I have a VI and found similar in Forums. I need to get the key to the bottom of the event, when the focus is not on VI.

  I have attached the VI found in the forum. Try clicking other windows, for example on the diagram of the VI, when VI is running and check if it works. The answer is no, it does not work. When you press a key, the button led should change its State, but it is only when the focus is on the face before of the VI. The question is how to control the pressure of touch, when VI is reduced or inactive. Is it possible to get the key to the low or any other similar event, when emphasis is placed on another application, not the VI?

  Take a look at the 'Connectivity... of input devices' menu.

  For an example, open the example finder and search for 'basic demo of entry. " It should give you some ideas. Good luck!

• How to make all the widget lost focus on any scrolling event?

  Problem: my button tooltips are dragged himself upwards and downwards and reworked on the screen when the screen scrolls.   There is a listener of scrollevent screen that should fire when the scroll event is happening, but it's not.

  Inside of my listeners to focus and scroll I have code that hides the displayed all ToolTips are off widgets development.

  So, why my scrolllistener is not shot?  It fires up when I do scroll by dragging the screen upward if my thumb is on a widge who accepts the update, but not when the affected widget can't receive the focus.  I partially fixed this by adding a mask manufacturers field for mae them focusable - but this seems to be a bug, is there a better way?

  Here's my interlocutor of the screen:

  this.setScrollListener (new ScrollChangeListener() {}
  ' Public Sub scrollChanged (Manager, int newHorizontalScroll,
  {int newVerticalScroll)
  setFocus();
  getActiveToolTips () .removeAllElements ();
  ToolTipMainScreen.this.invalidate ();
  }
  });

  Thank you

  PS: I use eclipse 3.5.2 last plugin, java last Windows XP pro 32 bit, JDE 4.7.  Pack 5 SIM, sim 9530 and real device 9550.

  Screen can be like that.  It has a hierarchy of managers, and I never know who is involved in this operation.  I can only imagine scrolling listener must be set on the manager returned by getMainManager(), but I'm not sure.

  To be completely safe, you can:

  1. create your screen with the explicit NO_VERTICAL_SCROLL indicator.

  2. Add your VerticalFieldManager(VERTICAL_SCROLL |) VERTICAL_SCROLLBAR) directly on the screen.

  3. Add the rest of your fields to this VerticalFieldManager. You can still use setBanner, setTitle, and setStatus for their intended uses, but never add anything directly on the screen.

  4. set all your custom goodies VerticalFieldManager - ScrollChangeListener, paint the background, custom, etc.

  This way control you as much as you can and don't count on the potentially changing nature of the screen.

• Focus of the app lost when VSStudio is open in win 7

  I have a sign in application it's built in .net/Vs2010, when I run it on win 7 with firm... VSStudio app works very well that he steals the focus and works like a forground window... but as soon as I launch visual studio 2010, the leading feature no longer works thereafter. I tried even to change the registry setting to 0 for setforgroundlockedtimeout. but it works until the VS2010 is closed.

  As soon as you open VS2010... win32 api call SetForegroundWindow() fails to keep the foreground window. There after if you shut up VS2010 always not behave in the way that it supposed to be. Let this work once again, I have to restart or logout m/c then app started working as expected, but if you open studio... Update loses automatically from my application for somehwere else.

  Is plase advice the real culprit of VSStudio or something else?

  Thanks in advance.

  Niku

  Hi Niku,

  The question you have posted is related to the application of Visual Studio 2010 and it would be better suited to the MSDN Community.

  Please visit the link below to find a community that will provide the support you want.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Hope it will be useful.

• Formatting lost when you view or generate the layout

  I have a few pages of the topic that use the same CSS throughout the entire project.

  It seems that when I copy the text from Word, the formatting becomes incorporated? and when I apply the correct style format does not change.

  OR

  The format looks good in design but when previewed or generated the font formatting is changed.

  I don't know enough about HTML code to see if there is something wrong.

  < body >
  <? HR-script_start? "" > < script src = "... / ehlpdhtm.js" type = "text/javascript".
  Language = "JavaScript1.2" > < / script > <? HR-script_end? >
  attachments < h1 > < / h1 >

  Attachments word in fashion design is in the format correct for heading 1 - violet in colour - when previewed or generated black font color changes.

  Any ideas?

  In your CSS file, many of the styles have poorly defined color. For heading 1, the color is defined as

  color: 5A2D7F;

  It should be

  color: #5A2D7F;

  Add the pound sign in your CSS for any style, where it is absent and you should be OK.

  See www.grainge.org for creating tips and RoboHelp

  @petergrainge

• event when the text does not fit in the field

  Hello

  When there is not enough room for the text in a field. Player will show a little "+". Is it possible to listen to this as an og event something similar?

  I have a field with room for 3 lines. If the user enters several. I need to supplement in anoter field.

  I sense that looking for the number of lines - I do a split for '\r' and get each row in a table. BUT the lines can be long, so just som enter 1 long line, my logic does not work. My policy is NOT monospaced, so I know how long a line!

  Let me hear if someone solved a case like this

  Thank you

  Thomas Groenbaek, Jyske Bank, Denmark

  If you check the box 'Time limit to the Visible area' on the ground, the complete event fires once the user fills out the field. You can put in a script like:

  xfa.host.setFocus (form1.subform1.overFlowTextField);

  in the complete event of the field with room for only 3 lines. Be aware though, that the focus change is not instantaneous and that a character or two could get lost, especially if the user is a fast typist. To make this work, you need to be "Limit length for area Visible" checked.

• Generate the event by timeout

  Hi all

  I have a structure of the event, whose events are all s 'change of the value' of the buttons on the front panel (each of them did switch a light when you click on it).

  I need one of the events to run also in the case where a certain time elapses (so that one of the lights to blink).

  Is there a way to generate such an event?

  I thought about creating a loop timed running in parallel, which generates an event 'false' to each iteration... but how this false event be generated? (it looks like all the events that can be handled by an event structure are generated by human action, such as push buttons, dragging the mouse etc..)

  Thank you, best regards

  It worked, but I had to use a parallel loop as suggested by johnsold.

  Thank you all!

• Error 1 to generate the user event

  I have a master/slave VI tester to evaluate the functioning of a Global functional error which should gather errors are generated in each loop.  I get 1 error: invalid parameters to the user events VI generate in the FG of entry error and do not know why.

  I enclose my (LV 8.5) shots of screw and screen, because I think that images would explain better than words.  I have documented the code to indicate what should happen and what is happening.

  Please let me know if you need more details.  Thank you! Your help is appreciated!

  ~ Kristen

  In the case of initialization of your VI main, you're going to initialize the FGV Subvi error.  But you can't give the refnum of user events to store in the shift register.

  When you use this FGV later, it uses the empty refnum into the shift register and sends that to generate the user event, and it gives an error.

• Generates an event on the indicator

  I'm developing a program in which I need to generate an event on the indicator, the project is as we give 4 entries for LabVIEW vi equipment, since these 4 controls are through material I can't generate events on them, so I'm trying to generate an event on the indicators of these controls , but the structure of the event does not respond when I use the value on the display change event. After doing some research, I got to know that we can use the value property (Signaling) to generate events on the indicator, but I don't get how to use it.

  This is the vi in which I train, this is not the project initial vi, it's just the vi to learn how to generate events on the indicator.

  Thanking you

  You create a value of signage as follows: click with the right button on the Boolean value and choose Create > property node > value (signaling)

  If send you a value to this terminal will trigger an event.  For example see the image:

  

• Set the focus on the phone number field when validation fails

  Hello

  I have a text field set up like a field of phone number, with the following text in the change event to accept only numbers:

  if(xfa.event.newText.match(/[^0-9]/)){
  xfa.event.change = "";
  }
  

  The validation of the model, I have this mask on all tabs (display, editing, Validation and data):

  Text {'('999') ' 999-9999}

  I want the user to be able to just enter numbers and have the parentheses and added automatically dash ["123-456-7890"].

  
  

  How the focus to stay on the field when it is not validated? (e.g., insufficient or too many digits).  I have looked at validationState , but couldn't find out how to use it (I am a javascripter noob).

  Thanks for any help.

  in the case of output of your domain:

  if (this.rawValue.length !=9) xfa.host.setFocus(this);
  

• The navigation pane disappears when the focus is changed

  I use Robohelp 7.01.001 and am generating a Microsoft HTML Help (main layout). When I open the CHM file, everything looks fine, but when I change the focus to the help file in the navigation pane is hidden. Is there a setting to always display the navigation pane?

  Welcome to our community

  If you change the definition of your window, you should see an option called auto hide the Nav pane.

  

  If this option is enabled, disable it and you should be golden. If it is not checked, select it and click OK. Disable it, and then click OK.

  If the steps listed above do not seem to solve the problem, maybe try to create a new window and set this as the window of your CHM file.

  See you soon... Rick

  Useful and practical links Wish to RoboHelp form/Bug report form Begin to learn RoboHelp HTML 7 or 8 times now - $24.95! Adobe Certified RoboHelp HTML Training SorcererStone blog RoboHelp EBooks

• How to validate an entry when the focus leaves the intensity absorbed in

  How to validate an entry when the focus leaves the intensity absorbed in a form?

  "Ansury" wrote in message
  News:garo90$L71$1@forums. Macromedia.com...
  > Not AFAIK. Event.Target has a reference to the object that sent the
  > event. In livedocs:
  >
  > "Every event object has a goal and a currentTarget property that help."
  > you
  > Hold where it is being spread. The target
  > property
  "> return to the sender of the event."
  >
  > BUT...
  > Your if statement will never evaluate true because you compare one
  > UITextField to a TextInput. A UITextField (stored internally in a
  (> TextInput, it makes the text) actually dispatches the event.

  currentTarget gives you the object on which the event actually listener
  attached to...

• How to avoid the focus problem when browsing via browser back button

  Hello
  
  I am facing a problem in setting focus on the buttons.
  Please see application: http://apex.oracle.com/pls/otn/f?p=47869:2
  
  login details:
  Workspace: vsanthanam
  user: vijay
  PSWD: apex_demo
  
  In this application, I have 2 pages.
  #2 has the "submit" button
  Page no. 3 contains the Cancel button
  
  The two buttons are basic HTML and can be accessed using access key ALT + s and ALT + c.
  
  The problem is:
  When I go back to the previous page (pgid #2) of the application using back button of the browser pgid IE #3.
  due to the onFocus event located in the button "submit", control returns to pgid #3.
  
  Is there a possible way to set the focus to other elements. so that whenever IE brower back button, application would stay in
  page #2.
  
  
  I took approaches:
  -------------------------
  If we use onclick, onfocus instead and then the problem remains because we have onfocus = "this.click (); in equipping the Accesskey.
  Another way is onKeyup event. If we use onKeyup, we can avoid this browser back problem, but disappears from the access keys functions.
  
  Pointers on this would be a great help.
  
  Thank you very much
  -Vijay
  
  PLEASE NOTE: I have created intentionally two buttons on each page. It is necessary to have HTML buttons with the key features of access,
  otherwise application gives a few flaws in HTML accesskey.

  Hi Vijay,

  Crikey, aren't annoying browsers! It took a while to get out, but I've updated your SUBMIT1 button attributes:

  class="t20Button" AccessKey="s" tabindex="-1" onclick="javascript:this.blur();doSubmit('SUBMIT1');" onfocus="javascript:this.blur();doSubmit('SUBMIT1');"
  

  Note that I removed the spare semicolons you after each attribute - these are only required in javascript code.

  The important point to note are the statements of "this.blur" () - this tells the browser to move away from the current item to the next. On your page, only for this purpose, I have added a text element of Temp - I am assuming that your actual page will have at least one other element on the page that will accept the focus? Everything gets focus of the call "this.blur ()", should be the element with focus when the Back button is used.

  Andy

• Don't put the focus on the textbox when switching to the new tab

  Hello

  I use Firefox and I like to browse websites using it.

  But after the update to version 10.0, I am facing problem. The focus is not set to Google search textbox when I open a new tab and click on text box, I have to click another element of Task Manager and then I see the update.

  I am facing this all the days of problem and it happened after updating to this new version, only I didn't face this before.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When I close a tab, the focus goes on the right. How can I turn left at the place?

  When I encounter a link on a web page, I usually open it in a new tab. This tab appears to the right of the current tab. I then select the new tab to see the link. When I finished and close this new tab, the focus goes to the tab to the right if we're here (usually the case for me), but I would have preferred the focus to return to the tab to the left, where I came from, and are therefore automatically. How can I change the direction of focus when I close a tab to remove the click of the mouse to select the previous tab?

  Look at:

  • Tabberwocky: https://addons.mozilla.org/firefox/addon/14439
  • Tab control: https://addons.mozilla.org/firefox/addon/1480