Generate the XML for double

Similar Questions

• Generate the xml in a program of Conc via the data model fails...

  Hi all...
  
  I hope, to a person, as a problem of beginner right front...
  
  As the title States, Ive created a model of data below...
  

  <dataTemplate name="UofS_Outstanding_Expenses_Report" description="SUEXPTRK - UofS Outstanding Expenses Report" dataSourceRef="FINTEST" version="1.0">
  <parameters>
  <parameter name="p_claimant" dataType="character" />
  <parameter name="p_expense_date_from" dataType="date" />
  <parameter name="p_expense_date_to" dataType="date" />
  <parameter name="p_raisedby" dataType="character" />
  <parameter name="p_status" dataType="character" />
  </parameters>
  <dataQuery>  
  <sqlStatement name="Q1">
  <![CDATA[
  SELECT erh.invoice_num, pap.full_name Employee_Claiming,
  DECODE(NVL(erh.expense_status_code, 'Not yet Submitted (NULL)'), 'CANCELLED', 'CANCELLED',
       'EMPAPPR', 'Pending Individuals Approval',      'ERROR', 'Pending System Administrator Action',
       'HOLD_PENDING_RECEIPTS     ', 'Hold Pending Receipts', 'INPROGRESS', 'In Progress', 'INVOICED', 'Ready for Payment',
       'MGRAPPR', 'Pending Payables Approval', 'MGRPAYAPPR', 'Ready for Invoicing', 'PAID', 'Paid',
       'PARPAID', 'Partially Paid',     'PAYAPPR', 'Payables Approved',     'PENDMGR', 'Pending Manager Approval',
       'PEND_HOLDS_CLEARANCE', 'Pending Payment Verification',     'REJECTED', 'Rejected',     'RESOLUTN',     'Pending Your Resolution','RETURNED',     'Returned',     'SAVED',     'Saved',     'SUBMITTED',     'Submitted',     'UNUSED',     'UNUSED','WITHDRAWN','Withdrawn',     'Not yet Submitted (NULL)') Expense_Status_Code ,
  erh.report_submitted_date Submit_Date, 
  erh.expense_last_status_date Last_Update,
  erh.override_approver_name ER_Approver,
  fu.description ADMINISTRATOR, 
  erh.total, 
  erh.description  
  FROM
  AP_EXPENSE_REPORT_HEADERS_all erh, 
  per_all_people_f pap, fnd_user fu
  WHERE erh.employee_id = pap.person_id 
  AND fu.user_id = erh.created_by
  AND NVL(erh.expense_status_code, 'Not yet Submitted') NOT IN  ('MGRAPPR', 'INVOICED', 'PAID', 'PARPAID')
  AND pap.full_name = :p_claimant
  AND erh.report_submitted_date BETWEEN (:p_expense_date_from) AND (:p_expense_date_to)
  AND fu.description = :p_raisedby
  AND erh.expense_status_code = :p_status
  ]]>
  </sqlStatement> 
  </dataQuery>
  <dataStructure>
  <group name="G_OUTST_EXPENSES" source="Q1">
  <element name="pap.full_name" value="Claimant" /> 
  <element name="erh.report_submitted_date" value="Submitted_Date_from" /> 
  <element name="erh.report_submitted_date" value="Submitted_Date_to" /> 
  <element name="fu.description" value="iExpenses_Administrator" /> 
  <element name="erh.expense_status_code" value="iExpense_status" /> 
  </group>
  </dataStructure>
  </dataTemplate>

  .. who I am trying to run in a data definition XML Pub.
  
  But, when I run the program designed to generate the xml was generated all matches the parameters without fields or data anywhere...
  

  <UOFS_OUTSTANDING_EXPENSES_REPORT>
  <P_CLAIMANT/>
  <P_EXPENSE_DATE_FROM>2009-01-01T00:00:00.000+00:00</P_EXPENSE_DATE_FROM>
  <P_EXPENSE_DATE_TO>2009-02-12T00:00:00.000+00:00</P_EXPENSE_DATE_TO>
  <P_RAISEDBY/>
  <P_STATUS/>
  <LIST_G_OUTST_EXPENSES>
  </LIST_G_OUTST_EXPENSES>
  </UOFS_OUTSTANDING_EXPENSES_REPORT>

  .. No matter what I try to change in the select statement, nothing happens...
  
  Please can someone offer any assistance...?
  
  Thanks for looking...
  
  Steven

  Hello

  Your problem may be:
  AND fu.description =: p_raisedby

  If p_raisedby is null your query returns no data.

  You need:
  AND fu.description = nvl(:p_raisedby,fu.description)

  Kind regards
  Gareth

• ++ HOW TO GET THE XML FOR THE PRINTING OF QUOTATION?

  Summary: -.
  
  The customer must change a rtf in R12.
  To check this, they need generate the XML data file in order to pass through the RTF in order to generate the PDF file.
  
  In other modules (such as check printing), the client can get the XML data file through the output of the simultaneous query. However, quoting is not
  provided, they need to know how they can get the XML data file.
  
  I have already posted this in the forum citing and was asked to publish it with the XML editor team.
  
  
  Please notify.
  
  Best regards
  Saket
  
  Published by: sakesing on March 11, 2009 19:10
  
  Published by: sakesing on March 11, 2009 19:11

  Do the metalink Doc ID: 364547.1
  Title: Troubleshooting Oracle XML Publisher for Oracle Applications 11i

  Works the same way for R12.xx

  go to section 3.3

  HTH

  Shaun S.

• Impossible to uninstall a program error: unable to generate the uninstaller for ca aintivirus E9030 command line.

  Original title: impossible to uninstall the program error msg

  I'm unable to uninstall a program, an error message keeps popping up saying "error E9030 cannot generate the uninstaller for ca aintivirus command line.
  can anyone help?

  Original title: impossible to uninstall the program error msg

  I'm unable to uninstall a program, an error message keeps popping up saying "error E9030 cannot generate the uninstaller for ca aintivirus command line.
  can anyone help?

  Try this... no guarantee

  Start > computer > open C: drive > open the Progran files > y at - it a record of the Ca antivirus?
  If so, open it > is there a uninstaller.exe file here?
  If so, open it and let go about uninstalling.

  Or,

  Start > all programs > CA antivirus > y at - it an option to uninstall?

  Hope one of these AIDS.

• How to generate the code for the ZXP file signing certificate

  I'm developing a creative using FlashBuilder 4.6 Adobe extension. I released the extension of a file .zxp and wanted to generate the code for him signing certificate. I've checked all the supported providers Adobe, but not found that anyone can do. Only, they provide the certificate for *.exe * .cab, *.dll and *.ocx.

  
  

  Thanks in advance.
  

  Leon.

  It's all too confusing.

  We use the Comodo certificate. You can use all the others as long as you end up with a point p12 certificate.

  Signing certificate by using the Digital Signature of the code

  http://www.InstantSSL.com/code-signing/index.html

  (1) request you the certificate. I used Internet Explorer on a PC because Comodo says it's better for them.

  (2) they do a thorough credit check to make sure that you are who you claim to be.

  (3) they shall issue a certificate giving you a PIN that he pay back.

  (4) redeem you your PIN certificate and the certificate is in your browser certificate cache.

  (5) you go to the cache and add a personal password for your certificate.

  (6) what makes a dot P12 file file name you choose.

  (7) now you can use your file p12 point with the utilities Adobe XZPSignCmd or ucf.jar to sign your Panel. I use the Mac utilities to sign on a Mac. The point p12 file is good on the PC and Mac.

  Don't worry, the utilities they speak about to sign. Adobe has their own utilities ZXPSignCmd and ucf.jar to do the signature. You are forced to timestamp your signature.

• WSSE-Server CodecHandler toUnable Failed to find the xml for setting element

  Hi all
  I invoke a Java webservice with signature and encryption (WSSE) of the soap message in my client program.
  The webservice is built with a JWSC ant task and deployed in weblogic 10.3.2 I get the below exception when calling it.
  I invoke a web service that takes a string as input and returns a string output. This web service uses the signature and encryption on both directions.
  I checked the public/private key certificates and everything seems to be ok.
  I don't know how to fix the sub question. Let me know if you have encountered this problem and it is solved.
  
  
  -[HTTP - https://cdctdevapp:7042/casestatusservice/CaseStatusService - 500 response]-
  Date: Monday, October 15, 2012 03:24:12 GMT
  X-powered-by: Servlet/JSP/2.1 2.5
  Content-type: text/xml; charset = utf-8
  Encoding: segmented
  NULL: HTTP/1.1 500 Internal Server Error
  < env:Envelope = "http://schemas.xmlsoap.org/soap/envelope/" xmlns:env > < env:Header / > < env:Server env:Body > < env:Fault > < faultcode > < / faultcode > < faultstring > [CodecHandler Server] could not decode
  -& gt; Could not find the xml for setting element: message
  < / faultstring > < details > < bea_fault:stacktrace xmlns:bea_fault = "http://www.bea.com/servers/wls70/webservice/fault/1.0.0" > weblogic.wsee.codec.CodecException: could not find the xml for setting element: message
  at weblogic.wsee.codec.soap11.SoapDecoder.checkNullElement(SoapDecoder.java:397)
  at weblogic.wsee.codec.soap11.SoapDecoder.decodeParams(SoapDecoder.java:285)
  at weblogic.wsee.codec.soap11.SoapDecoder.decodeParts(SoapDecoder.java:172)
  at weblogic.wsee.codec.soap11.SoapDecoder.decode(SoapDecoder.java:125)
  at weblogic.wsee.codec.soap11.SoapCodec.decode(SoapCodec.java:182)
  at weblogic.wsee.ws.dispatch.server.CodecHandler.decode(CodecHandler.java:139)
  at weblogic.wsee.ws.dispatch.server.CodecHandler.handleRequest(CodecHandler.java:40)
  at weblogic.wsee.handler.HandlerIterator.handleRequest(HandlerIterator.java:141)
  at weblogic.wsee.ws.dispatch.server.ServerDispatcher.dispatch(ServerDispatcher.java:114)
  at weblogic.wsee.ws.WsSkel.invoke(WsSkel.java:80)
  at weblogic.wsee.server.servlet.SoapProcessor.handlePost(SoapProcessor.java:66)
  at weblogic.wsee.server.servlet.SoapProcessor.process(SoapProcessor.java:44)
  to weblogic.wsee.server.servlet.BaseWSServlet$ AuthorizedInvoke.run (BaseWSServlet.java:285)
  at weblogic.wsee.server.servlet.BaseWSServlet.service(BaseWSServlet.java:169)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:183)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3717)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
  < / bea_fault:stacktrace > < / details > < / env:Fault > < / env:Body > < / env:Envelope >.
  
  < WSEE:1 > create < SoapMessageContext. < init >: 48 >
  < WSEE:1 > set Message called: com.sun.xml.messaging.saaj.soap.ver1_1.Message1_1Impl@996b65 < SoapMessageContext.setMessage:65 >
  < WSEE:1 > set Message called: com.sun.xml.messaging.saaj.soap.ver1_1.Message1_1Impl@996b65 < SoapMessageContext.setMessage:65 >
  < WSEE:1 > set Message called: com.sun.xml.messaging.saaj.soap.ver1_1.Message1_1Impl@996b65 < SoapMessageContext.setMessage:65 >
  < WSEE:1 > set Message called: com.sun.xml.messaging.saaj.soap.ver1_1.Message1_1Impl@996b65 < SoapMessageContext.setMessage:65 >
  Exception in thread "main" javax.xml.ws.soap.SOAPFaultException: [CodecHandler Server] could not decode
  -> Could not find the xml for setting element: message
  
  at com.sun.xml.ws.fault.SOAP11Fault.getProtocolException(SOAP11Fault.java:197)
  at com.sun.xml.ws.fault.SOAPFaultBuilder.createException(SOAPFaultBuilder.java:130)
  at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:125)
  at com.sun.xml.ws.client.sei.SyncMethodHandler.invoke(SyncMethodHandler.java:95)
  at com.sun.xml.ws.client.sei.SEIStub.invoke(SEIStub.java:136)
  to $Proxy27.sayHello (Unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke (unknown Source)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke (unknown Source)
  at java.lang.reflect.Method.invoke (unknown Source)
  at weblogic.wsee.jaxws.spi.ClientInstanceInvocationHandler.invoke(ClientInstanceInvocationHandler.java:84)
  to $Proxy28.sayHello (Unknown Source)
  at org.adr.nydcci.wss.ws5UntSignEncryptHttps.client.ws5UntSignEncryptHttpsPortClient.main(ws5UntSignEncryptHttpsPortClient.java:44)

  Thank you very much, Sunil. I could solve the problem.
  Demand has been framed properly, as my annotation TJS for my client was pointing to a fake name.
  fixed the ' @WebParam (name = "") ")" attribute to my client and it worked well. " The problem is solved now.

  Thank you
  Sriram

• How to create ViewObject to generate the xml file?

  Hello everyone...
  
  People, I would like to know if it is possible to create a ViewObject to generate an xml file.
  In other words, I have a database table and I need to generate an xml file based on this table.
  
  Someone has already done it?
  
  The ADF swing.
  JDeveloper Studio 11.1.1.4.0.

  Hello

  Try this link

  Generate the xml file based on the java oracle table using jdeveloper 10 g

• B2B Gateway fails to generate data xml for 997

  Hi all
  
  I am faced with a particular problem with one of my test B2B case, where xml for 997 EDI X 12 file is not generated. The file EDI 997 is get picked up however it will fail to generate the request message. In the report so there will be no errors. When I click on the details link on the page of reports for the 997 message the message of application link is not active and does not redirect to the details of the application pop up message by clicking on it.
  
  Could someone of you please think why this problem occurs... It worked perfectly in my case of dev...
  
  Please also suggest if more details could be found in the log files of B2B.
  
  
  concerning
  Rakesh

  Your real problem is configuration...

  You must go to the Configuration under Administration tab and section of the page, set "notify functional Inbound" accused of reception and the "receipt functional managed automatically ' to 'true '. Otherwise the message from the Application does not get generated for your 997 s entering.

• Generate output XML for a PL/SQL stored procedure concurrent program (EBS).

  Hello
  
  I trying to generate XML output for a simultaneous PL/SQL program and then use it as a model for BEEP.
  Program PL/SQL for a report consist of sliders/queries and other calculations of output data.
  Program (report) made up of topics, couple of col. values of one or more tables DB and rest of the columns are values read from DB colonel and calculated. The length of the neck extends up to 280 characters.
  
  All out - put is shown using fnd_file.put_line (fnd_file.ouput,...);
  before first fnd_file statement, included the following stmt.
  fnd_file.put_line (fnd_file.output,' <? xml version = "1.0" encoding = "UTF - 8"? > ');
  
  Using demand conc., notice ouptut poster error...
  The XML page cannot be displayed
  Invalid at the top level of the document. Error during processing of the resources ' http://ohcol0ws023.amp-ohio.org:8004/OA_CGI/FNDWRR.exe...
  <? XML version = "1.0" encoding = "UTF-8"? >
  
  I tried to add tags in the rest of the fnd_file.put_line stmts. as
  fnd_file.put_line (fnd_file.output, '< Heading1 >' |) 'Report name ' | (/ head2 > '); etc.
  
  View output shows the same error message.
  
  PL. advise how go further or tell me the link, if it's already been answered earlier.
  
  Thank you
  Prak

  Copy the file from $APPLCSF / $APPLOUT to your customer and try to open it. Find out what's wrong with the code XML, for example, you may need to top level element:
  
  

  Write to me if you can't get by - see my profile.

  Kind regards
  Gareth

• Generate the report for the custom period

  I did experiment with Foglight NMS for the past few weeks. I have search in the forums and hunts around the tool, but I've not found a way to generate a report on a custom period. For example, I would like to run a report, see use of bandwidth during opening hours. The only options I see is "last hour", "Last day", "Last week", etc. "." Is this possible? Any help or ideas would be appreciated.

  Hi Michael,

  While we do not have a report which shows the range you're looking for, you can see the use of bandwidth via NetFlow. I know it is not a report, but could be able to show the amount of data sent over the network for a period of time. Lies and must have the feature seen on the road map.

  Mario

• PowerCli script to generate the report for the VM and ESXi model

  Hello

  I'm trying to generate a report for the virtual machines to a domain controller that includes the operating system, Cluster and host of brand and model of ESXi, but for some reason any the ESXi info does not come through. Any help is greatly appreciated.

  Get-data center 'TEST ' |

  Get - vm |

  WHERE-object {$_.} PowerState - eq "Receptor"} |

  Select Name, @{N = "OS"; e = {$_.}} Extensiondata.Guest.GuestFullName}},

  @{N = "Cluster"; E={$_. VMHost.Parent}},

  @{N = 'Esxi model'; E = {Get-VMHost - VM $_.} VM | {{Select model}}

  The virtual machine has the properties of the host.  For your information "Model ESXi" use $_. VMhost.Model, $_ is the current information for pipeline for the virtual machine.  You did for the section "cluster".

• Generate the XML file with elements and attributes in table Oracle

  Hello
  
  I have the following table structure.
  
  CREATE TABLE SPOOL
  (
  COIL_ID NUMBER (10),
  COIL_NUMBER VARCHAR2 (40),
  COIL_PO_OPERATING_UNIT VARCHAR2 (20).
  COIL_PO_NUMBER VARCHAR2 (40),
  MILL_NUMBER VARCHAR2 (2),
  MILL_COIL_STATUS VARCHAR2 (15).
  ITEM_NUMBER VARCHAR2 (40),
  COIL_WEIGHT NUMBER (38),
  WEIGHT_UOM VARCHAR2 (10),
  DOCUMENT_NUMBER VARCHAR2 (40),
  DATE OF DOCUMENT_DATE,
  DOCUMENT_STATUS VARCHAR2 (15).
  DOCUMENT_TYPE VARCHAR2 (20).
  DOCUMENT_SOURCE VARCHAR2 (20).
  TEST_ID NUMBER (38),
  NUMBER VALUE,
  TEST_UOM VARCHAR2 (20).
  TEST_STATUS VARCHAR2 (70).
  TESTER_LOGIN VARCHAR2 (20).
  EQUIPMENT_CODE VARCHAR2 (50).
  DOC_STS_MSG VARCHAR2 (600)
  )
  /
  For each record COILID, there could be several folders baased on TEST_ID/VALUE/TEST_UOM etc.
  
  And I would like to prepare the xml file in the following format by selecting data in the COIL?
  
  
  <? XML version = "1.0"? >
  -coil xsi: noNamespaceSchemaLocation = "www.tempel.com/COIL.xsd" xmlns: xsi = "http://www.w3.org/2001/XMLSchema-instance" xmlns:xdb = "http://xmlns.oracle.com/xdb" >
  < CoilId > 1419532 < / CoilId >
  < CoilNo > D2221050010A0 < / CoilNo >
  Changzhou < CoilPOOperatingUnit > < / CoilPOOperatingUnit >
  < CoilPONo > 4619 < / CoilPONo >
  < MillNo > 86 < / MillNo >
  Test of < MillCoilStatus > < / MillCoilStatus >
  C5 050FP800 < ItemNo > < / ItemNo >
  < weight > 7076 < / weight >
  KILOGRAM of < GLU > < / UDM >
  < DocumentNo > 0 < / DocumentNo >
  < DocumentDate > 2013 - 01 - 11 < / DocumentDate >
  < DocumentStatus > not < / DocumentStatus >
  < DocumentType > test < / DocumentType >
  CHIGMA1 < DocumentSource > < / DocumentSource >
  < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.4992" TestUnit = "mm" Status = 'NonProcessed' TestId = "135" / >
  < test DocStsMsg = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.0128" TestUnit = "mm" Status = 'NonProcessed' TestId = "124" / >
  < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "12" TestUnit = "mm" Status = 'NonProcessed' TestId = "125" / >
  < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.5095" TestUnit = "mm" Status = 'NonProcessed' TestId = "127" / >
  < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.5042" TestUnit = "mm" Status = 'NonProcessed' TestId = "128" / >
  < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.5058" TestUnit = "mm" Status = 'NonProcessed' TestId = "129" / >
  < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.4967" TestUnit = "mm" Status = 'NonProcessed' TestId = "130" / >
  < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.5049" TestUnit = "mm" Status = 'NonProcessed' TestId = "131" / >
  < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.4972" TestUnit = "mm" Status = 'NonProcessed' TestId = "132" / >
  < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.4960" TestUnit = "mm" Status = 'NonProcessed' TestId = "133" / >
  < DocStsMsg test = '0' EquipmentCode = "CHIGMA1" TesterLogin = "dpkrueger" Value = "0.4996" TestUnit = "mm" Status = 'NonProcessed' TestId = "134" / >
  < / reel >
  
  Can you please guide me how to do it in a single query?
  
  Thanks in advance.

  Function EXTRACT will force a print in your version:

  SELECT XMLElement("Coil",
           XMLAttributes(
             'http://www.w3.org/2001/XMLSchema-instance' as "xmlns:xsi"
           , 'www.tempel.com/COIL.xsd' as "xsi:noNamespaceSchemaLocation"
           )
         , XMLForest(
             COIL_ID                as "CoilId"
           , COIL_NUMBER            as "CoilNo"
           , COIL_PO_OPERATING_UNIT as "CoilPOOperatingUnit"
           , COIL_PO_NUMBER         as "CoilPONo"
           , MILL_NUMBER            as "MillNo"
           , MILL_COIL_STATUS       as "MillCoilStatus"
           , ITEM_NUMBER            as "ItemNo"
           , COIL_WEIGHT            as "Weight"
           , WEIGHT_UOM             as "UOM"
           , DOCUMENT_NUMBER        as "DocumentNo"
           , DOCUMENT_DATE          as "DocumentDate"
           , DOCUMENT_STATUS        as "DocumentStatus"
           , DOCUMENT_TYPE          as "DocumentType"
           , DOCUMENT_SOURCE        as "DocumentSource"
           )
         , XMLAgg(
             XMLElement("Tests",
               XMLAttributes(
                 DOC_STS_MSG    as "DocStsMsg"
               , EQUIPMENT_CODE as "EquipmentCode"
               , TESTER_LOGIN   as "TesterLogin"
               , VALUE          as "Value"
               , TEST_UOM       as "TestUnit"
               , TEST_STATUS    as "Status"
               , TEST_ID        as "TestId"
               )
             )
           )
         ).extract('/*')
  FROM coil
  GROUP BY COIL_ID
         , COIL_NUMBER
         , COIL_PO_OPERATING_UNIT
         , COIL_PO_NUMBER
         , MILL_NUMBER
         , MILL_COIL_STATUS
         , ITEM_NUMBER
         , COIL_WEIGHT
         , WEIGHT_UOM
         , DOCUMENT_NUMBER
         , DOCUMENT_DATE
         , DOCUMENT_STATUS
         , DOCUMENT_TYPE
         , DOCUMENT_SOURCE ;
  

• not generating the trace for rdf report by oracle apps file

  Hi all
  
  
  in fact, we aim to generate trace file for reports and a convert to text file using tkprof by simultaneous program unix shell script submit using fnd_request.submit_request in another program of concurrent proceedings. but all the reports that are created by using pl/sql generates the trace file, but rdf report does not trace file.
  
  Report generator Oracle 6i is used
  
  Oracle application is 11i
  
  List of measures are being taken to get the trace file are
  1.SRW. USER_EXIT (' FND SRWINIT' "); before the release of report
  2SRW. USER_EXIT ("FND SRWEXIT'"); in after the report
  
  another of the measures which are followed
  SRW.do_sql ("alter session set SQL_TRACE = TRUE'"); before release of the report
  SRW.do_sql ("alter session set SQL_TRACE = FALSE'"); in after the report
  
  above, said steps are done, but still it does not arouse any trace file
  
  same oracle_process is null
  
  Select oracle_process_id from the fnd_concurrent_requests where request_id
  
  ID processOracle for this report oracle rdf file is not generated.
  
  
  Please help me in this issue
  
  Thank you
  
  Published by: 797525 on October 12, 2012 12:43 AM

  Add the following line before the outbreak of report
  SRW. DO_SQL ("alter session set events = tracefile_identifier" trace 10046 name context forever, level 4 "=" REPORT ' ")

  Trace stops automatically when the report closes.

  In addition, what program submits the script fnd_request.submit_request... shell / pl/sql procedure?

  you initialize apps FND_GLOBAL. APPS_INITIALIZE before submit_request of shooting?

  Make a DNF: active Log Debug = Yes and check the table of fnd_log_messages

  See the following MOS docs:
  Oracle 6i [ID 111311.1] follow-up reports
  See you soon,.
  ND
  Use the buttons "useful" or "correct" to award points to the answers.

• import the request xml file and the xml for mds dataset

  Hello world
  
  I exported xml default request to the metadata file.
  Then I have the ModifyResourceDataSet.xml and I change the ModifyResourceRequest.xml file to use the dataset file.
  
  I then edit weblogic.properties.
  metadata_from_loc = / u02/app/oracle/product/fmw/IOM/server/bin/oracle/metadata/iam-features-requestactions/model-data
  metadata_files=/U02/app/Oracle/product/FMW/OIM/Server/bin/Oracle/metadata/IAM-features-requestactions/model-data/ModifyResourceRequest.XML
  I executed weblogic.properties
  Can I edit weblogic.properties file again.
  metadata_from_loc = / u02/app/oracle/product/fmw/IOM/server/bin/oracle/metadata/iam-features-requestactions/model-data
  metadata_files=/U02/app/Oracle/product/FMW/OIM/Server/bin/Oracle/metadata/IAM-features-requestactions/model-data/ModifyResourceDataSet.XML
  
  But, when I try to create change the provided resource, screen related dateset moved not.
  When the error?
  Or where I'm bored?
  
  Thank you.

  Hüseyin Carole,
  What message errorr you found? Check the doc for the weblogicImportMetadata command.
  http://docs.Oracle.com/CD/E21764_01/doc.1111/e14309/utils.htm#OMDEV759
  Besides that this request for OIMMetadata should be up.
  -Kuldeep

• How to generate the ddl for unlimited quota

  Hi all
  
  DB: Oracle 9.2.0.4
  OS: Solaris 8
  
  I have a 12 tablespaces and 18 users of the application.
  I would like to grant an unlimited quota for all users on all areas of storage, to find out how to generate the ddl script.
  
  ex: change the dataagent user quota unlimited on DSOM.
  
  can anyone help us.
  Thank you
  KK.

  All users in all areas of storage?

  Select "edit user" | user name | "quota unlimited on | nom_tablespace | ';'
  from dba_users cross join dba_tablespaces
  When not in dba_tablespaces.tablespace_name ('SYSTEM', "SYSAUX");

  Please, be careful with this

  HTH
  Antonio NAVARRO