Generate the report for the custom period

Similar Questions

• Is there a better way to generate the custom timed digital signals

  I'm trying to generate the digital output from the top and down with delays on different lines. Each daq assistant is activate single line on a port USB 6501. There more complex high and lows that I need to generate variable time difference between high and low. There is codebelow that does what I'm trying to achieve, but for a model executing high and low signal is much of your time to do it this way. I'm sure there is a better way to do it, I'm not an expert on labview so I only discovered its potential. Anyone can suggest a more effective and a quick way to do it. I would like to hgihly appreciate. Thank you!

  I've not shown in the code below, but using the DAQ assistant, I initialized lines at low logic level.

  

  
  

• Cannot assign an average property weighed for a custom period dimension

  Hello
  
  I have an application which is to have a custom with 52 weeks period dimension. I'm not able to attribute a ' average weigh-Actual_actual "and"weighed average-Actual_365"property to all members of account because is is not in the drop down at all. -What for a custom application period these properties do not exist, or I make mistakes somewhere? If this isn't there for a custom application period, is there a function to find the way to crazy? I use Hyperion Planning 11.1.1.3.
  
  Kind regards
  Brig.
  
  Published by: ragavhere on May 8, 2010 16:16

  The planning Administrator Guide States: "You can use the properties of average weighted balance - Actual_Actual and weighted average - Actual_365 only with a standard monthly calendar that runs up to four quarters."

• PowerCli script to generate the report for the VM and ESXi model

  Hello

  I'm trying to generate a report for the virtual machines to a domain controller that includes the operating system, Cluster and host of brand and model of ESXi, but for some reason any the ESXi info does not come through. Any help is greatly appreciated.

  Get-data center 'TEST ' |

  Get - vm |

  WHERE-object {$_.} PowerState - eq "Receptor"} |

  Select Name, @{N = "OS"; e = {$_.}} Extensiondata.Guest.GuestFullName}},

  @{N = "Cluster"; E={$_. VMHost.Parent}},

  @{N = 'Esxi model'; E = {Get-VMHost - VM $_.} VM | {{Select model}}

  The virtual machine has the properties of the host.  For your information "Model ESXi" use $_. VMhost.Model, $_ is the current information for pipeline for the virtual machine.  You did for the section "cluster".

• How to generate the AWR compare period report comparing No. continues period

  Hi guys,.
  
  I take a photo based CWA at all hours for a week.
  
  Now, I would compare the snapshots collected during the day (between 08:00 and 04:00) for snapshots collected during the night (between 18:00 to 06:00) for not only one day, but throughout the week.
  
  I just want to ask you how can I generate an AWR report compare with these pictures?
  
  Do I have to use some template base AWR special or something?

  Eric.Zhou wrote:
  For 7 days, I take 2 basic lines every day, the first inlcude reference performance data collected from 08:00 to 17:00. The second category includes data from 18:00 to 06:00. So I will be having 14 lines at the end of the week. See below:

  Reference collected during the day: day_baseline_1, day_baseline_2, day_baseline_3, day_baseline_4, day_baseline_5, day_baseline_6, day_baseline_7
  Line base gathered during the night, night_baseline_1, night_baseline_2, night_baseline_3, night_baseline_4, night_baseline_5, night_baseline_6, night_baseline_7

  I like to summarise the data collected in the "day_baseline_7 day_baseline_1" then compare it to the data that were "night_baseline_1 at night_baseline_7".

  A step in this direction will be to export the AWR (there is a script awrextr.sql that can help with this) and then would drop snapshots for the baselines during the day. You can then generate a report covering the week of nights. Import the AWR (there is the script for this, too), drop the night base lines and generate a report for the week of days. You will have to compare them by hand, but you all week in each report.
  Everything good?

• How to generate a report of the duration of the sessions remotely on windows server 2008 r2?

  Hello

  I have about 10 (local users, not domain) users who are loging in Microsoft Server 2008 R2 to use accounting and planning software (using RDS) remotely. I would like to generate a report for the time spent to see how many hours each of them had been registered. Ideally, I would like to see all of last year (2011). Is it possible to do? Thank you in advance!

  Stan

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Is there a way to generate a report via the command-line script or groovy?

  I would like the option to generate a report (for example, model "Host physical load summary") from the command line, where I will provide the settings he needs.   Is there a way to do in groovy?

  Okay, maybe this constant is not declared in 5.5.8.2 yet. Just replace-1

• Need help in the development of different customized reports for SCCM 2012 using the Report Builder version 3.0

  Members of the Group of respected

  I need your urgent assistance to solve my problem, if someone who at least somewhat or large information please help me.
  My problem is related to SCCM 2012 and SQL server 2008.
  : - I have to develop a custom reports for SCCM 2012 for one of my clients. I have configured all the settings required for preparing the report, and I have examples of reports provided with sccm 2012.
  I get the problem while developing new relationships, if I have examples of reports that I have studied the corresponding reports. I don't get detailed information from the database to create query and get the desired result. As I have not idea of detail of this database structure in it.
  So I need help to create the query as I am new on this database.
  If anyone understand please give me help or link where I can build the report
  Thanks in advance.

  Forums for this product are here: http://social.technet.microsoft.com/forums/en-US/category/configurationmanager/

• Calculation of the value of ready for a custom time period

  Hello

  article (*) and some other sites describe how to calculate the percentage value of the ready time for the periods of time given (in real time, (day, week, month and year).

  States KB:

  There is a shortcut, you can use the following formulas for the intervals to update chart by default to get the loan % CPU:

  • Real-time: value of summons processor / 200
  • Last day: value of summons UC / 3000
  • Last week: value of summons UC / 18000
  • Last month: value of summons UC / 72000
  • Last year: value of UC summons / 864000

  But it is also possible to obtain the divisor for a custom time period?

  for example if I choose the period of 14.10.2013 - 14.10.2013 08:00 - 10.00. The period is 2 hours. But what is the divisor and how to calculate it for other periods?

  Any help would be greatly appreciated,

  Chris

  (*) VMware KB: conversion between the summation of values CPU and CPU ready %

  It depends on what adjustments to custom value data.

  for example. If the custom vale was spent time maintaining real so in your example it is 2 hours and then he gets back in the daily data, it would be in 5 min data points.

  same goes if my custom value went for 2 days, it will be so in the past set of data of the week etc. It does not display some of them in every week and then some in every day.

  BTW, the numbers you cited have an extra 0 on the end of each

  See you soon

• I get it during the installation of the first elements 13 ' the product you want to install is not a genuine Adobe software and appears to be counterfeit. Please report or contact customer support for assistance'

  I get this message when installing an upgrade of the first elements 13 ' the product you want to install is not a genuine Adobe software and appears to be counterfeit. Please report or contact customer support for assistance'

  Warning: "Adobe software real failure of Validation...". » | Windows

• not generating the trace for rdf report by oracle apps file

  Hi all
  
  
  in fact, we aim to generate trace file for reports and a convert to text file using tkprof by simultaneous program unix shell script submit using fnd_request.submit_request in another program of concurrent proceedings. but all the reports that are created by using pl/sql generates the trace file, but rdf report does not trace file.
  
  Report generator Oracle 6i is used
  
  Oracle application is 11i
  
  List of measures are being taken to get the trace file are
  1.SRW. USER_EXIT (' FND SRWINIT' "); before the release of report
  2SRW. USER_EXIT ("FND SRWEXIT'"); in after the report
  
  another of the measures which are followed
  SRW.do_sql ("alter session set SQL_TRACE = TRUE'"); before release of the report
  SRW.do_sql ("alter session set SQL_TRACE = FALSE'"); in after the report
  
  above, said steps are done, but still it does not arouse any trace file
  
  same oracle_process is null
  
  Select oracle_process_id from the fnd_concurrent_requests where request_id
  
  ID processOracle for this report oracle rdf file is not generated.
  
  
  Please help me in this issue
  
  Thank you
  
  Published by: 797525 on October 12, 2012 12:43 AM

  Add the following line before the outbreak of report
  SRW. DO_SQL ("alter session set events = tracefile_identifier" trace 10046 name context forever, level 4 "=" REPORT ' ")

  Trace stops automatically when the report closes.

  In addition, what program submits the script fnd_request.submit_request... shell / pl/sql procedure?

  you initialize apps FND_GLOBAL. APPS_INITIALIZE before submit_request of shooting?

  Make a DNF: active Log Debug = Yes and check the table of fnd_log_messages

  See the following MOS docs:
  Oracle 6i [ID 111311.1] follow-up reports
  See you soon,.
  ND
  Use the buttons "useful" or "correct" to award points to the answers.

• How to generate the report for LUNS attached to esx

  Hi I m help esx 3.5 with vc 2.5 u 3 .we use 4 host cluster with 25 LUNs and attached to their creation of vm is very common in our production environment testing. can any body tell me the command or how so I can generate report for each lun attached to the esx like size of lun, used, free... second how vm, I on lun perticulr

  VDF h

  should meet your needs

• Custom report for assistance of the form

  Hello

  We just finished a contest where we collected the customer details. The e-mail address field should be no mandatory if we have hidden the required field in the code creating an email by default to work around and created our own text for the email address field.

  The problem is, when I extracted the data, the first name and last name fields that were in the form are white. Is it possible to access these data?

  

  Thank you

  BC uses the address of electronic mail as a primary key, so I guess that FirstName and LastName have been replaced with a presentation of each new, rather than be unique for each presentation.

  In addition, if any entry name attributes that not exactly matches the field names BC was expected, that the data were never recorded.

• Change the sequence of commands to generate two reports by USE with different names.

  I have a special situation for the model of batch processing.

  Each DUT consist of two distinct products that need to be tested as a single unit.

  I can run every USE and generate a test for each report.  -aka. The standard use case works very well.

  However, we would like the records using this method. So I need a copy with a different name for each series.

  The idea behind this is that we have a story running for each half of the UUT. Given that the two halves will probably never meet.

  I looked at the BatchModel.seq and read some of the documentation, but I'm having a hard time to understand what is happening.

  

  I guess the items highlighted above are where the object to measure reports are generated. However, I don't know the mechanism for giving them the names among the Options report-> report menu Pathname file or how to change between these two points in time. Also are there tricks to get the report in duplicate with a different path in this configuration.

  All links to the relevant information would be useful. Thank you

  Just copy these two steps and between them and the copies have another step that is just a statement.  There, you can change the path of the report by setting parameters. TestSocket.ReportFilePath the new path.

  Ideally what you would do, is that the client using a callback.  So, your code would look like this:

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Define report path reminder (override in customer OR statement step)

  Write the object to measure report

  Write the report of the object to be measured (on the fly)

  Hope this helps,

• How to generate the report on rules

  How to generate the report on rules with id recipient and with a few keyoword in a rule.

  The rule management dashboard has an integrated 'report rules', you can configure properties and input parameters.

  For rule management dashboard, click homes > Administration > rules. In the upper right, next to the date and time, click reports.

  You can also find these helpful videos: http://edocs.quest.com/foglight/5610/Foglight_Reports_videos.php

  Hope this helps,

  Shay