Generation of loop infinite nest

Similar Questions

• How to fix error of loop infinite ati2dvag for XP

  How can I fix error loop infinite ati2dvag for XP?

  An electrical 'loop', usually means a part or parts are not connected

  missing or damaged, normal channels loops, or the chks and balances that should be, are

  not. Current car/truck pcs have this problem all the time after age sets, its

  the components in other areas that are at fault.

  In your situation, if its an old card, turn off the pc, remove card, take a pencil #2

  eraser to clear and clean the connection tabs, it does not take much. If this is a new card,

  is the BIOS configured correctly for what he (AGP/PCI, etc.), if everything is ok, try to install a newer version or

  former pilot, get ATI, also, get the latest installation of microsoft DirectX, well

  idea to do both...

• TextBoxField loop infinite sublayout

  I have two custom fields that have problems of work between them.

  One is MemoField, based on the TextBoxField in knowledge base articles. This is an edit box in a VerticalFieldManager which must only show a number of lines at a time and scroll.

  The other field is RoundedPanel that extends VerticalFieldManager and draws a box rounded on the edges.

  The two fields work very well on their own, but if I have a MemoField in a RoundedPanel and in the MemoField more than 20 lines, it goes into a loop infinite sublayout.

  Anyone know what I'm doing wrong?

  These are the classes:

  MemoField:

  public class MemoField extends VerticalFieldManager {
  
      private int _rows;
      private EditField _editField;
  
      public MemoField(int rows)
      {
  
          super(Manager.NO_VERTICAL_SCROLL);
          _rows = rows;
  
          VerticalFieldManager vfm = new VerticalFieldManager(Manager.VERTICAL_SCROLL);
  
          _editField = new EditField()
          {
              public void paint(Graphics g)
              {
                  getManager().invalidate();
                  super.paint(g);
              }
          };
  
          vfm.add(_editField);
          add(vfm);
      }
  
      public void sublayout(int width, int height)
      {
  
          int w = Display.getWidth();
          int h = _editField.getFont().getHeight() * _rows;
          super.sublayout(Math.min(w, width), h);
  
          setExtent(Math.min(w, width), h);
      }
      public int getPreferredHeight()
      {
          int h = _editField.getFont().getHeight() * _rows;
          return h;
      }
  /* some get and set methods */
  }
  

  RoundedPanel:

  public class RoundedPanel extends VerticalFieldManager
  {
      public void paint(Graphics g)
      {
          int initialColor = g.getColor();
          g.setColor(Color.LIGHTGREY);
          g.fillRect(0, 0, this.getPreferredWidth(), this.getHeight());
          g.setColor(Color.WHITE);
          g.fillRoundRect(3, 3, this.getPreferredWidth() - 6, this.getHeight() - 6, 20, 20);
          g.setColor(Color.DARKGRAY);
          g.drawRoundRect(3, 3, this.getPreferredWidth() - 6, this.getHeight() - 6, 20, 20);
          g.setColor(initialColor);
          super.paint(g);
      }
      public void sublayout(int maxWidth, int maxHeight)
      {
          super.sublayout(maxWidth, Integer.MAX_VALUE);
  
          int fieldCount = getFieldCount();
          int x = 6;
          int y = 6;
          Field child = null;
  
          for (int i = 0; i < fieldCount; i++) {
  
              child = this.getField(i);
              setPositionChild(child, x, y);
              layoutChild(child, getFieldWidth(child), Integer.MAX_VALUE);
              int childHeight = getFieldHeight(child);
              y = y + childHeight;
          }
          this.setExtent(getPreferredWidth(), Math.max(y, getPreferredHeight()));
          setVirtualExtent(getPreferredWidth(), Math.max(y, getPreferredHeight()));
      }           
  
      private int getFieldWidth(Field f)
      {
          return Math.min(Math.max(Math.max(f.getContentWidth(), f.getWidth()),f.getPreferredWidth()), this.getPreferredWidth() - 12);
      }
  
      private int getFieldHeight(Field f)
      {
          int ch = f.getContentHeight();
          int h = f.getHeight();
          int ph = f.getPreferredHeight();
          return Math.max(Math.max(f.getContentHeight(), f.getHeight()),f.getPreferredHeight());
      }
  
      public int getPreferredWidth()
      {
          return Display.getWidth();
      }
  
      public int getPreferredHeight()
      {
          int height = 6;
          int iNumFields = getFieldCount();
          for (int i = 0; i < iNumFields; i++)
          {
              height += getFieldHeight(getField(i));
          }
          return height + 6;
      }
  }
  

  Thank you.

  A lot of trial and error, I seem to have fixed without really understanding why.

  If I remove the call to super.sublayout in RoundedPanel and change the width in the call to getFieldWidth (child) to maxWidth-12 layoutChild, everything seems to work properly.

  Thanks for trying to help.

• Preloader loops infinitely

  Hello world

  I am updating a project of edge 4. Opening with edge 5 has generated a < project_name > _upgraded. It contains more than _edge.js < project_name > and < project_name > _edgeActions.js, but no < project_name > _edgePreload.js. How can I make edge 5 generate this file? Or the preloader is now managed by the other two JS files?

  What is confusing to me: locally, my project works well in the browser without this < project_name > _edgePreload.js file. but on the server, the preloader loops infinitely :-(

  Any idea? Thank you

  Gil

  Hello

  Yes you are right. with the latest version of lively edge pre-loader is managed by 2 other files...

  As you mentioned that the edge pre-loader upgrade is if works fine locally, this means no problem with codes.

  Please remove your animation Web page completely and put it back. (After a charge of the publication of the upgraded project)

  If the question until persists then I would like to know the URL of the page and also the software that you use to insert the animation on the page? Muse or DW?

  Concerning

  Vivek

• loop infinite Avira &amp; mail

  Everyone knows the avira / mail loop?

  Avira deletes an email with an attachment that is dangerous.

  Mail redownloads.

  Infinite loop.

  Freezes in the post.

  Only solution is to disable avira, kill the mail.

  Delete the message and re - activate aviria.

  The other option is to uninstall Avira as it is unnecessary and only serves to slow down your Mac.

• Loop infinite redirect when group selection in Google groups

  When I connect to Google groups, and then select one of my groups, I get in a 'infinite redirect loop. Page crashes, "Redirection" appears in the title of the page, and at the bottom, he says "waiting for google.com" or "waiting for groups.google.com" (alternation). I have Firefox 3.6.3, which I think is the last and largest.

  This problem has been reported to Google and you can see the discussion here:
  http://groups.Google.com/group/is-something-broken/browse_thread/thread/8fb760742f6ce7ba/f7065d7bd3499f65#f7065d7bd3499f65

  You go to the Google Help forum groups, look at the discussion "Is something broken" and look further for 'Infinite redirect loop.' Maybe that's a problem that affects only the moderators.

  I don't know if there is a problem with Firefox, Google groups, or interaction.

  URL of affected sites

  http://groups.Google.com/

  
  

• Vista Home Premium SP1 Reboot loop infinite, inaccessible Windows restore

  Problem: Update marked Service Pack 1 (I do not know the real KB #) sent my computer in an infinite loop.  After a reboot "3 3 0% complete configuration updates / don't turn off computer" appears and the percentage continues to 100%, the system reboots and repeat.  I left the computer to update last night and now he has been yet updated this morning.

  Is trying to solve: I studied what I can on this problem.  I tried to access the system restore via the following methods:

  1. Shut down the computer, restart the Advanced Boot Options screen boot mode safe.  Result: after the appearance of the logo windows at startup, the screen returns to the screen "Update Configuration".  This is the case on 'Safe Mode', 'Safe Mode with networking' 'Last good known Configuration (Advanced)' and "Directory Services Restore Mode" I have not tried other options in the screen options start
  2. Using the recovery DVDs I've done after the installation of Vista (circa Dec. 2006): result: restore option only includes the restoration of the recovery image of boot sector with a complete HD wipe factory-installed.  Not the restoration of the system of options available.

  Plug material: I have (obviously) Vista Home Premium installed above a factory installed Windows XP Media Center (SP2).  Partition 2 contains an area of recovery that will restore the original settings.  Another partition is Ubuntu, which is how I can log in and post this message.  Also:

  • Model: Compaq Presario SR2050NX Media Center
  • Processor: Intel Pentium D 2.8 GHz dual core
  • MoBo: ESC Asteropi 3
  • Chipset: ATI RC410
  • Southbridge: ATI SB400
  • Memory: 1024 M DDR2 - SDRAM (PC2-4200/PC2-4300/533 MHz)
  • HARD DRIVE: 250 GB
  • OS: Windows Vista editions Home Premium on XP Media Center SP2
  • Secondary to OS: Ubuntu 9.04

  Computing: Average
  
  Mood: upset

  My goal is to restore the system to a point before the installation of the update.  I didn't want to wipe the system and start over.

  Thank you
  TB

  Do a repair disc to do a repair system restore / boot:

  As is the case with most computers/laptops these days, they do not come with good Vista disc to repair only the recovery disks.

  As your grave in the category above, download the ISO on the link provided and make a bootdisk of it.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  You can make a tool to restart system, System Restore, etc. with it.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista repair disc.

  You can do a system restart tool, system, etc it restore.

  There is not a disk of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  If this does not work, now looking to relocate, because you have only the factory recovery disc.

  Mick Murphy - Microsoft partner

• Infinite nested directories - cannot delete.

  Hey, I tried to copy a directory I had on my system files, and my computer sent me an error saying it could not copy.
  I looked in the phone book to see what was causing the problem and found that I got the infinite set of nested directories.

  The path is as follows:
  "C:\Documents and Settings\NICK MILLER\My Documents\JOGL 2\jogamp-windows-i586\lib\"

  In the folder lib final, is another lib folder. And the Interior which is another lib folder. I have the first lib folder right click and check its properties. He said that it contained about 44 records.

  When I try to delete the first lib folder, I get the following error message.

  Error deleting file or folder
  Cannot remove lib: the specified file name is not valid or too long. Specify a different file name.

  I know this cannot be linked to any newly installed software because this issue is related to some Java API, I downloaded earlier.

  On another interesting note, I tried to change all file names to contain only one of the names of characters of 'lib' to 'a '.
  And oddly enough, as soon as there was enough space available to add another lib folder, it would create a new folder.
  So now, I have about 85 cases. 83 of which are names 'a' and the last couple 'lib '.

  I think it is a virus to be honest, but I'm not sure.

  Any help is greatly appreciated. Thank you.

  It might be malware (you have not identified you're a / v application or it is indicated if you have scanned with MalwareBytes anti-malware or SUPERAntiSpyware), but given that you seem to work with Java development, it can also be a wild Java application.

  In any case, one of the following techniques should work for you:

  Starting a thread 6 year of Ms. former MVP R.C. White:

  Although we don't usually see each file/folder with a Long file name
  (LFN) has also a computer-created short file name (SFN), also known as
  8.3 file name, since it is limited to 8 characters plus and optional
  3 character extension. (This goes back in the history of the computer to)
  MS-DOS and before.)

  To view your folder 8.3 file name, open a command prompt and enter:
  Dir/x

  This command must be the usual list of all files and folders
  in this directory, as with the plain Dir command. But the /x switch
  create an additional column, before the LFN, showing the SFN for any file or
  folder whose LFN does not also the requirements of 8.3. There may be
  a space or other "illegal" character in the name of the file. The SFN to an LFN
  likely 6 characters, followed of ~ 1, or of some other figures.

  Use the command Del or RD with the PNS to remove your file or remove your
  folder. With the help of RD /s for the top-level folder must remove everything
  directory tree.

  (As always in a command prompt window, type the name of any command followed
  by /? See all switches and parameters that are available with this command,
  such as: Dir /? )

  \B.  If method A doesn't work

  You said you tried to rename the files in order to make the shortest path, but as soon as you got the shortest path, a new subdirectory is created.  You must stop this from happening.  You can uninstall your Java development software, according to John Rubdy, or choose one of the following methods:

  (a) restart mode without failure or (b) the clean boot mode or (c) open both a Command Prompt windows and Task Manager and stop explorer.exe using the Task Manager (do not close the Task Manager).

  According to these 3 modes you are, use method A above.  You might also be interested to read here--> http://superuser.com/questions/256105/how-do-i-delete-a-folder-which-is-nested-quite-deep-and-avoid-file-name-too-lon

  If you chose (c), when you are finished with the removal, click on file > new task (run...) in the Manager of tasks to restart explorer.exe.

  C. Si neither A nor B work

  Start the computer by using a live Linux distro (for example, Knoppix) or Hiren BootCD similar boot cd and delete the directory tree by using the tools available.

• Reboot loop infinite blackBerry Smartphones Blackberry 8820

  I know this has been discussed several times, but I'm near my wits end here.  I don't remember exactly how it started, but my 8820 is now stuck in an infinite loop.

  Here is what I tried:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=8300&view=by_date_ascending&message.i...

  http://www.BlackBerryForums.com/rim-software/1871-BlackBerryOS-4-x-download-FAQ-upgrade-downloads.ht...

  which breaks down basically to remove the battery and attempt to restore the operating system (it seems to work until the BB reboots, then he jumps in the reboot loop) and using the JL_Cmder to wipe or resettofactory.  No matter what I try (or where in the startup cycle I try), nothing seems to work.

  Is there some special gotcha that I'm missing?  I need really just my phone at work. Thanks in advance.

  If this directive does not - help take your appliance to the nearest repair facility to reset the device memory.

  Unfortunately I do not see another way to solve the problem.

• Looping on nested Structure

  Hey guys,.
  I have a component that returns a structure. The structure is called ContactQuery. ContactQuery has elements, one called results and called a success. Results contains the data I want to loop over. If you try a loop on the ContactQuery Using CFLoop and specify the ContactQuery as the collection, of course he only buckle twice (once for the results, once for success). How can I loop on the inside of structure results ContactQuery? You can see the dump of the structure:
  http://www.digitalswordsmen.com/CFSCHEDULE/Admin/Create_Tokens_Table.cfm
  
  This is the code that I've attached. I am just not sure of the syntax for looping through the results section of the structure.
  
  Thank you.

  It seems that this is the query. Have you tried a regular request loop?

  
  ...
  

• Y500 - broken display and loop infinite blue screen.

  
  

  Update:

  I just got my replacement screen and it works very well he even sent a screen xD.

  But for the blue screen problems, it is apparently a common problem to the y500s with a 16 gb SSD msata. I should not install Intel Rapid Storage or remove the SSD drive. From what I could see, the SSD is basically dead...

• Loop - infinite scroll - Muse content

  Hello.

  I have a lot of pictures in boxes to my new site. I'd say if you scroll to the right or left, upward or down it turns forever, with a static, floating menu bar on top. So I need right to left and bottom to top. Like a carousel. Please help me to learn how.

  Muse unfortunately can't do what you ask, because there is no way for the program to automatically repeat images on your page when you scroll.

  The only way to Muse to make this work is to make one large image with your images/boxes and set it as a "complete browser" Plaid.

• nested loops for speed optimization

  Hello. I need help to optimize for speed (in LabVIEW) code (matlab) following:

  -----------------------------------

  a = rand(1024, 200);
  b = rand(1024, 512);
  c = Zeros (200,512);
  ICT
  for i = 1: 200
  j = 1:512
  c (i, j) = (Sum ((:,i).*b(:,j))) a ABS;
  end
  end
  Table of contents
  end

  -------------------------------------------------------------

  Basically I have two 2d tables, a and b, one with 200 columns and rows of 1024, other columns a 512 and 1024 lines. What I have to do is multiply (dot product) each column a each column of b, the sum and take the absolute value of the result. The output, c, will be an array of 2d of size 200 x 512. Is it possible to do without the help of 2 loops of nesting? The two paintings 2d, a and b\, are produced by my material.

  What is the best strategy to get the maximum speed? I have a powerful enough processor.

  Thank you very much?

  So I looked at this problem, said «seems familiar, but different...» ».  Did a little math, encoded at top and improved the speed by a factor of 100 (with absolutely no parallelism).  How about apples?

  If we let A and B tables 1024 x 512 and 1024 x 200 and turn them into matrices, the problem is (mathematically) the absolute value of the transposed from A times B, where "the times" are the multiplication of matrices.  I "guessed" that NEITHER would have included the Multiplication of matrices in his bag of tricks and maybe optimized, so I coded it upward, adding the calendar.

  Using the first double Lynn - to multiply, sum, formulation of abs and a 'do it as a matrix' on my machine, the Array 1004 msec, the matrix method took 10 msec, as well as the results differ by less than one part in 1 million (I generated at random (0, 1) floats, and made the comparison by subtracting the two tables and checking that the absolute all the differences were less than 1E-6).

  Bob Schor

• Multiple monitors - cursor Infinite Loop

  I have a system of Windows 7 Enterprise 64-bit running a configuration triple monitor, and I want to know if its possible to set the cursor to one loop infinite.

  Imagine that I have my cursor on the left screen. I move to the right and it goes through the Center and right screens. When it crosses the right edge farther from the screen to the right, it appears again on the left edge of the left screen.

  -or-

  (* = cursor)

  [*1 ] [ 2 ] [ 3 ]

  [ 1*] [ 2 ] [ 3 ]

  [ 1 ] [*2 ] [ 3 ]

  [ 1 ] [ 2*] [ 3 ]

  [ 1 ] [ 2 ] [*3 ]

  [ 1 ] [ 2 ] [ 3*]

  [*1 ] [ 2 ] [ 3 ]

  Makes sense?

  Hello Alex,.

  Thanks for posting your question on the Microsoft community.

  Thank you for your query details.

  Unfortunately, it is not possible to do so as this is normal.

  However, if you want to send any comment about Windows, you can check out this link:
  http://connect.Microsoft.com/

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• A loop Nested Styles - a number of paragraphs of body text Variable

  In a loop of nested styles, which is the trick that allows a variable amount of paragraphs signaling front InDesign to move to the next Style?
  
  I got nested style sheets a loop well enough for a report format that I'm trying. Group headers and management work well, but I can't get my nested styles to work with varying amounts of text. Some sections may have a single paragraph (and my grand of work styles nesting!), whereas most of the sections have more than one paragraph (in this case, my nesting styles do not work correctly).
  
  I tried to use a special character to indicate where the paragraph ends - as a tab on the right - but this has not worked for me. Any other suggestions?

  Example:

  Directorate A header

  Group header 1

  Group 1 leader name

  Group 1 body text

  Group header 2

  Name of the head of Group 2

  Group of 2 body text

  Group of 2 body text

  Group of 2 body text

  Group header 3

  Name of the head of Group 3

  Group of 3 body text

  and so on up to the...

  Direction B header

  Group header 1

  Group 1 leader name

  Group 1 body text

  and so on...

  Thank you!

  No, you're right, each paragraph would need a style. I believe that the word styles also have a following style attribute, but the problem would be the same here trying to loop.

  But this is how text is supposed to be delivered - completely style, but not necessarily with the correctly defined styles. You can redefine the style in the code. I understand that the authors do not know how to use Word and do not have any idea of styles, but if you have people clean the text to add the styles part of the cleaning process, including adding character to the bold and italic styles, etc..