Y500 - broken display and loop infinite blue screen.
Update:
I just got my replacement screen and it works very well he even sent a screen xD.
But for the blue screen problems, it is apparently a common problem to the y500s with a 16 gb SSD msata. I should not install Intel Rapid Storage or remove the SSD drive. From what I could see, the SSD is basically dead...
Tags: Lenovo Notebooks
Similar Questions
-
I just finished a new construction, including Windows 7 Home Premium 64-bit. Update all the drivers went through, and now I get BSOD. Initially, I'd get them, after that the system wake up to 'sleep' mode, but this morning I received after you start the computer from the closure. They are the mistakes STOP F4, and I'm sure that there is a way to fix them, I just need help on where to start. After a few reboots to check the version of the BIOS and what not, the computer would no longer connect to the internet.
Here is my configuration:
CPU: Intel Core i3-3225 3.3 GHz Dual - Core Processor
Motherboard: ASRock H77M Micro ATX LGA1155 motherboard
Memory: G.Skill Ripjaws X Series 8 GB (2 x 4 GB) DDR3-1600 memory
Storage: Intel 330 series 240GB 2.5 "Solid State Disk
: Fractal Design Arc Mini Micro ATX mini-tower case
Power supply: Rosewill Capstone 450W 80 PLUS Gold Certified ATX12V / EPS12V power supply
Optical drive: Lite-On iHAS124-04 DVD/CD burner
Operating system: Microsoft Windows 7 Home Premium SP1 (OEM) (64-bit)
Other: 2 x Western Digital Caviar Blue 500 GB 3.5 "7200 RPM hard drive internalAnd here are two mistakes STOP I was able to capture up to now:
STOP: 0X000000F4 (0XFFFFFA800B938B30, 0XFFFFFA800B938E10, 0 X 000000000000003, 0XFFFFF80002F80460)STOP: 0X000000F4 (0XFFFFFA800BCF4B30, 0XFFFFFA800BCF4E10, 0 X 000000000000003, 0XFFFFF800031D4460)
This was my first computer build and I really enjoyed until the software part; simply too many current intangibles. A lot to learn and I'm happy to do, but my wife would like a stable computer.
Original title: how to troubleshoot and resolve problems blue screen for new construction
Hello
Bug_Check F4 is generally hard, cables, and associated hard drive controller.
Since this is a new construction House remove ALL power - reinstall all memory cards and cables (on
both ends where possible) - actually delete and replace - do not just tight. Make sure heat
sink and compound are correctly placed and that all lovers of work.Check with the ASRock support, their documentation online, the diagnosis and ask in their forum
for problems known.ASRock - Support
http://www.ASRock.com/support/index.aspASRock - Forums
http://www.ASRock.com/support/forum.aspASRock - downloads
http://www.ASRock.com/support/download.asp=============
See this article:
You receive various Stop error messages in Windows 7 or in Windows Server 2008 R2 when
you try to resume a computer that has a large hard drive SATA.
http://support.Microsoft.com/kb/977178-----------------------------------------------------------------------------------------------------------
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or cannot start Windows.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
for the office or in the Documents folder and download them from there.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive to upload collected files.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65================================================================
BCCode: F4 0x000000F4
Check and reinstall the cards memory and cables (at both ends where possible) in fact
delete and replace - do not just tight. On a laptop computer on all you can do is reinstall it
memory and possibly check the connection/contacts on the hard drive. Memory could
be the problem, so if you have more than 1 stick swap them in and out to see if the
problem follows a stick or try the new memory. Antivirus/anti-spyware/security programs
have been known to cause or have a role in this matter.More general patch updates day and low level chipset BIOS drivers and other control
software.Also check the wiring on the hard drive.
Bug Check 0xF4: CRITICAL_OBJECT_TERMINATION
Important info if you received a STOP Code
If you received a blue error screen, or a stop code, the computer stopped abruptly to protect against data loss. A hardware device, its driver or software might have caused this error. If your copy of Windows is shipped with your computer, contact your computer manufacturer. If you purchased Windows separately from your computer, Microsoft provides support. To find contact information for Microsoft or the manufacturer of your computer, Contact Support.
If you have experience with computers and try to recover from this error, follow the steps in the Microsoft article solution STOP (blue screen) errors in Windows.
These actions could prevent a mistake like this does not happen:
- Download and install updates for your computer from Windows Update device drivers.
- Scan your computer for computer viruses.
- Check your hard drive for errors.
CRITICAL_OBJECT_TERMINATION parameters
The following settings are displayed on the blue screen.
Parameter Description 1
The Terminal object type:
0x3: Process of
0x6: Thread
2
The endpoint object
3
The name of the process image file
4
Pointer to a string ASCII containing an explanatory message
Cause
Several processes and threads are necessary to the functioning of the system. As they are completed for some reason, the system can no longer function.
BCCode: F4 0x000000F4<-- read="" this="">-->
* 1241.html http://www.faultwire.com/solutions-fatal_error/A-process-or-thread-crucial-to-System-Operation-has-0x000000F4-==================================================================
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.Windows Vista restarts automatically if your computer encounters an error that requires him to plant
(also, Windows 7 and Windows 8).
http://www.winvistatips.com/disable-automatic-restart-T84.html-------------------------------------------------------------------------
Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during ' blue screen
of death "crashes and displays the information about all crashes in one
Table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista (also Windows 7) Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlStop Windows 7 to automatically install device drivers
http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/How to disable automatic driver Installation in Windows 7 / Vista
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
Ultimate and Enterprise)
http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlHow to do a repair installation to repair Windows 7
http://www.SevenForums.com/tutorials/3413-repair-install.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
When I log on my computer its is open for a minute and then a blue screen with error lights and him stops
I can only log in safe mode of network.
original title: blue screen error
If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup. Finally, find the one that is causing your program to crash.
"How to solve configuration errors by using the System Configuration utility in Windows XP"
<>http://support.Microsoft.com/kb/310560 >"System Configuration Utility overview"
<>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>HTH,
JW -
When you've been a long game my system hang and see a blue screen?
When you've been a long game my system hang and see a blue screen?
You gave us a general indication of the nature of the problem but the specific error reports are a much easier solution.
When a BSOD (Blue Screen of Death) the system failure occurs, for most users, there not enough time to fully record what he says. the exact text is important for anyone trying to diagnose what is wrong. You can save time when the error occurs then by following the procedure described below.
If you already did it disable the auto reboot system error. This should help by allowing the time to write the code to Stop error and related information correctly. Do right click on the icon my computer on the desktop and select Properties, advanced, startup and recovery, system failure and uncheck the box before automatically restarting. Re-do not enable automatic restart in the event of system failure after obtaining this information, this setting is the best left to not allow an automatic restart.
If the failure occurs during the initialization of the computer, you need to try a different approach. You can access the Advanced Options Menu of Windows on multiple computers by constantly pressing the F8 (key) key when starting and selecting the option - disable automatic restart in case of system error. This method is not always easy to use because it may be difficult to press the F8 key at the right time. Try again if it doesn't work the first time. On some computers, a different key must be used.
Hope this helps, Gerry Cornell
-
Satellite P300 guard crashing and giving me blue screens
Hello
I got a Satellite P300, running on Windows Vista home premium and its provided with a card ATI Mobility Radeon HD 3650.
My laptop crashes and send me windows and blue screens said that it is the cause of ls my graphics driver and the eror message is Atikmdag.
I've tried everything (I think), I re - installed windows but what I had to do a restore with the current settings, because in some cd a little way my F8 function does not work so I couldn't restore my windows from my hard drive.
I also had the latest Ati drivers, it does not help either, I also re-installed and tried to run my laptop on windows drivers, it doesn't help either.I don't really know what to do, can anyone help me please?
Are you sure you're running video drivers downloaded from a site of Toshiba? Unfortunately the drivers may not be the root of the problem, so it is important to eliminate as the cause. How to remove AMD recommended driver is [http://support.amd.com/us/kbarticles/Pages/GPU57RemoveOldGraphicsDrivers.aspx] and if you follow that with an installation of drivers Toshiba, then your laptop must be in a State also provided
I would recommend that you look at this [how to troubleshoot display driver stopped responding and has recovered, errors of type ATIKMDAG.sys | http://support.amd.com/us/kbarticles/Pages/737-27116RadeonSeries-ATIKMDAGhasstoppedrespondingerrormessages.aspx]
-
Z2 doesn't start and loop SE splash screen
Dear all,
It's been 4 months, I have this Z2, up to now, everything worked well, last day 0% battery drain completely, and he went down. After that some time, I have connected the phone to wall charger with charger and cable original, the screen boots and sony xperia flash, then it get off and then again guard buckle boot,
The RED led comes on and then off and screen SE flash and maintains a loop... I tried to turn off wielding + power that nothing works.
I tried to connect to the CCP, but it does not detect and keep looking phone. I tried to repair using CDP, but it does not detect phone. I tried now volume during the power on but the green light does not come...
When I press UP + power, blue LED lights up but nothing happens.
don't know wht happened, please suggest me what to do... unable to use the phone or powere on im or im not able to do anything.
Expect your best support at the earliest.
Wajid
Hello
I went and gave the phone to the dealer, he said, there is moisture inside the phone, and may be covered by its warranty dealer. 1 month before I used this phone in the pool water to take pictures, but it did not work, I had no problem, but the dealer said there is water inside.
However, device was returned to me, and then I went to service center, they opened the phone and just he removed the battery and plugged in the back. screen started and then gave a message please connect the phone to the PC, software update failed.
Then I connected the phone to the PC companion, made repair phone, everything went well and now the phone works fine.
I noticed now that the battery a little faster. I mean when I kept the phone in 96% charged, flight mode, no wifi, remained unused for the full night and morning I noticed battery drained a 86%, nearly 10% without any use. I don't know it's normal, but it empties so fast, even when the phone is in airplane mode, no wifi...
However, now the phone works... Thank you all.
-
Event Viewer has perflib and repeated pc blue screen error
My husband PC crashes which is especially used for WOW; When I checked the critical errors with perflib event log are the problem. I don't know that Vista had hoped for the entry of any person who might have had the same problem, do fix while it goes back into his room.
Hello
Check this thread for more information using BlueScreenView, MyEventViewer and other methods
to troubleshoot the BlueScreens - top 3 responses (+ 1 other).We can analyze the minidumps if make you it available to the SkyDrive or another file
sharing sites.ZIP or download the content of the C:\Windows\minidump
Use SkyDrive download collected files and after shot/screenshot.
http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
(also Windows 7)
http://www.winvistatips.com/disable-automatic-restart-T84.html===========================================================
Check out these utilities to see if information may be collected:
It is an excellent tool for displaying the blue screen error information
-Free - BlueScreenView scans all your minidump files created during "blue screen of death," collisions
and displays information about all accidents of a table.
http://www.NirSoft.NET/utils/blue_screen_view.html-------------
MyEventViewer can be verified at the time of the blue screen (BSOD) within a second or so of the
time of the BSOD to provide more information about the possible cause - see TIP.MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the whole of the record-
Set it for a bit before and after the time of the BSOD.
http://www.NirSoft.NET/utils/my_event_viewer.html------------
AppCrashView - free - a small utility for Windows Vista and Windows 7 that displays the details of all the
application goes down has occurred in your system. The information breaks down is extracted from the .wer
the files created by the Windows Error Reporting (WER) of the operating system component of each
time that an accident has occurred. AppCrashView also allows you to easily record the list of accidents to
text/html/csv/xml file.
http://www.NirSoft.NET/utils/app_crash_view.htmlI hope this helps and happy holidays!
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
My computer is
Intel Core i7 860 @ 2.80GHz processorInstalled RAM 8 Gb (usable 3.24) - G.SKILL RIPJAWS, DDR3 1600 GB PC3-12800 2 x 4 sticks.System type: 64-bitMotherboard: ASUSTek Comp Inc. Model: P7P55D
BIOS Date: 2009-12-07 Ver: 08.00.15Operating system: Windows7 Professional 64-bit Service Pack 1
GeForce GTX 275Tried "Remapping ACTIVE" in BIOS > tab advanced, then restarted and the system was fine and kicked + 100%(Checked system properties - display of 8 GB of RAM installed perfectly usable)then stop. Then restarted the system, but after the system attempts to restart I get "Blue Screen of Death" - unstable system and "Dumping Memory. So now, he is off again.Necessary assistance in this regard, been looking for solution for a while.Dear Gerry,
I think I solved my problem.
I have reset the motherboard and CMOS by removing the battery.
I now get on my system properties
-installed memory 8Gb and (usable 6.99)Thanks for your help once again.
-
I have to leave my computer on to avoid having to turn it off with the power off button. Otherwise, I have to turn on & off with the power button. When I do that he will go to start windows normally or delete files and go to the system restore. When I hit windows normally it will go to a blue screen with the cursor at the top left doesn't Flash and that's it. So, I press the power button to continue until initialization starts normally.
Hello
- You did it last changes before the show?
- What is the error message/code what do you see with the blue screen?
- What is your operating system?
- Are you able to boot to the desktop?
The steps below apply to Windows 7:
Resolve stop (blue screen) error in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7
Note: Make sure that you back up your data.
Important: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive.
Step 2) click on the link below to provide newspapers:
What are the information contained in the logs of the event (Event Viewer)?
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer
Step 3: Run a virus scan:
Microsoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.
It will be useful.
-
After that the installation of upgrades KB2419640, KB976902, KB890803 I'm unable to boot. I get the blue screen. I used chkdsk, memtest etc. No problem. I disabled the upgrades to prevent settling. I'm not comfortabel thereby. Is there a solution?
You are able to boot mode safe? If you can, do and run System Restore:
To access the system recovery environment in Windows 7, simply start your PC, just before the system loads the Windows operating system. Press the [F8] key function 8 on your keyboard which will launch the menu Advanced Boot Options. You will see a new option 'Safe Mode', select this option and press 'Enter' on your keyboard.
System Restore -Windows 7 features - Microsoft Windows
After you're booted in Normal mode, click Start, all programs > Windows Update
Check for updates, now updates you're experience problems with, each of them right click and click "hide update".
If they are updated driver in particular, do not install them, hide them instead, any update of the driver offered, instead of this download directly from the manufacturers Web site.
HowManage , Configure and troubleshoot Windows updates releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP
-
Four days ago, I installed an xp update and got the blue screen
When I turn the computer on a black screen comes and tells me that an error has occurred and asks me if I want to start in safe mode or my previous settings, when I click on safe mode it freezes and when I click on previous settings, flashes a blue screen and the computer restarts. I've heard to solve a similar problem with the xp CD and I do not. If that person cannot find a windows solution better get another CD.
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)?
A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
The foregoing despite...
See the section "How to get help" of http://support.microsoft.com/kb/977165
Or you can...
Launch a collateral request for assistance free Windows Update:
https://support.Microsoft.com/OAS/default.aspx?Gprid=6527Home Security page customer & Microsoft Update Solution Center also offer support options
https://consumersecuritysupport.Microsoft.com/
http://support.Microsoft.com/ph/6527#tab3For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site: http://support.microsoft.com/common/international.aspx
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
I tried to update with windows and got the blue screen?
Once the download is complete, I got the blue screen that makes the computer to restart. Once it reboots it works fine however in the lower corner
to the right of the screen, I still see a yellow shield with black exclamation point saying "updates are ready for your computer" Please
Click here for updates. The computer is a Windows XP and what I can do about it?Kind regards
TedHelp us help you: start by reading this post 'sticky '...
What information to post in the Windows Update forum
http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395 -
Critical hard drive put in custody and loss of blue screen
I lost my blue screen and get warnings re critical threats of damage from hard drive and virus (trogen horse) however no virus detected on a scan from windows? warnins continually pop up.
Start in safe mode / networking.
Get malwarebytes to day then do a full scan. Looks like a fake / rogue software . Then delete everything he finds the reboot then run rkill
-
Computer guard stop and causing the blue screen Error Message
With the help of a Dell Vostro 200 with Windows XP Professional. Suddenly, after you have moved the computer from one office to the next, she regularly stops and we get this blue screen that says:
Technical information:
STOP: 0X000000D1 (0 X 00000060, 0XAA2AD341, 0000002 0 X, 0 X 0000000)
WUSB54gcv3.sys - address AA1AD341 base at AA15B000, Datestamp 48 b 66753
Beginning physical memory dump
Total physical memory dump
For more assistance, contact your administrator or technical support group.A problem has been detected and Windows has shut down to prevent damage to your computer.
Drive_IRQL_NOT_LESS_OR_EQUAL
If this is the first time you've seen this Stop error screen, restart your computer. If this screen appears again follow these steps:
Make sure any new hardware or software is installed correctly. If it is a new installation, ask your hardware manufacturer or software, the Windows updates, you might need.
If the problem persists, disable any newly installed hardware or software, disable memory options such as caching or shadowing the BIOS. If you need to use Mode safe mode to remove or disable components of your computer restarts, press F8 to select advanced startup options, and then select Safe Mode.
Can anyone help? I installed an update of the necessary BIOS and that did not help and the computer is configured to have Windows Installer automatically what is updated, it needs.
Thank you.
Pages 29 and 30
http://support.Dell.com/support/eDOCS/systems/ins9300/en/OM/om_en.PDF
Hope this helps, Gerry Cornell
-
Problems during startup and disc.sys blue screen
I got hard to start that a 32-bit Vista computer does not move in front of the black screen, sometimes there is a blinking underscore, or the mobile mouse pointer. Usually I restart with ctrl-alt-del and it works, it takes sometimes a few tries.
It also seems to start normally when I go out in the inside installation disc, when he's not here it hangs in checking dmi pool Data given, when he asked me to "press any key" If there is a disc inside.
This happens only when the CD player is first in the boot order, so I change to hard first push which does not start again.
If someone has encountered this?
If I get to the connection, everything works very well afterwards.
I was going to repair the installation disc, but it's moving before the Microsoft corporation at startup loading bar.
Then, I got a blue screen PAGE_FAULT_IN_NON_PAGED_AREA with Codes and * disk.sys with address
I tried CHKDSK and last good known Configuration, but nothing helped.
In addition, it was after I reinstalled from the cd of installation about five days ago everything worked as well the first two days... the only problems I had were with the installation of updates, after I finally installed successfully, it's when, startup problems began.
Any experience or advice appreciated!
JMP
You have two questions.
1 - associated WRkrn.sys Webroot for Webroot SecureAnywhere I would remove it
2-drive hardware problem.
I remove Webroot and go the HD manufacturer download their utility check HD and run it.
Maybe you are looking for
-
P7-1490 - latest version of the BIOS.
I want to know the latest version number and the date of the bios. Were there an upgrade since this model is released?
-
OfficeJet 5615 black stripes during the scan
My Officejet 5615 works perfectly, but in recent months, it shows black scratches on document scanned on the glass. Bands go for the length of the scanned page, and the glass is clean. I guess there is something wrong with the 'pixels/conduit' scanne
-
Go until the released function has changed?
Then, I changed my laptop and to reinstall the LabVIEW and all the rest to continue working, does not have a physical medium on hand, so I download lv of the site and didn't know OR now shoehorns lv 2016 as de facto download, if you want to update or
-
Problem of discovery of the cDAQ-9191 in MAX
I have a new cDAQ-9191 with 9208 module that I have connected to my PC with an Ethernet cable. I use DAQmx 15.1.1 in Windows 7 Pro SP1 64 bit and MAX 15.0.0f0. The cDAQ-9191 appears under devices and Interfaces > network devices. There is no IP ad