Get information for clip loaded in the source using ExtendScript monitor

Similar Questions

• OutOfMemoryError: Limit superior GC exceeded when loading directly the source using IKM sql for sql. Growing ODI_MAX_HEAP do not solve the problem.

  OutOfMemoryError: GC overhead limit at execution a loading interface directly sql for sql with no work table.

  I get the error message: error: exception OutOfMemoryError: higher GC limit exceeded when executing an interface making a direct using IKM SQL for SQL command load Append, source a 150millions lines table.

  I have increased the ODI_MAX_HEAP and the interface run longer and failed. I'm already at: ODI_MAX_HEAP = 12560 m I tested with ODI_MAX_HEAP = 52560 m and still error.

  I am following up to the memory of the server and I still have available memory...

  Apart from the problem of memory I know that this type of load should be possible because the step of data load on LKM SQL to Oracle is able to load the work table $ CAN. Ideally, I want to emulate this behavior by using SQL for SQL IKM.

  1 - What is the right path to follow here? (change the parameters of memory or modify the IKM?)

  
  

  2 - ideas on how to solve the OutOfMemoryError: GC overhead limit exceeded error? (GC means Garbage Collector)

  Execution of the IKM interface in the Simulator generates this code:

  Load (Source) command:

  Select

  source - tbl.col1 COL1,

  source - tbl.col2 COL2,

  source-tbl. "' COL3 ' COL3

  of public.source - tbl AS source-tbl

  where

  (1 = 1)

  Default command (Destination):

  insert into the source-tbl

  (

  col1,

  col2,

  COL3

  )

  values

  (

  : COL1,.

  : COL2.

  : COL3

  )

  My experience is very limited with ODI so I don't know about changing the code to the KMs

  Thanks in advance.

  Find a work around the error of generals limit exceeded GC:

  -in my case I was running without the IDE so that changes made to the odiparams.sh were not useful.

  -This means that I need to change the JVM settings to:

  $ODI_HOME/oracledi/client/odi/bin/odi.conf

  AddVMOption - XX: MaxPermSize = NNNNM

  $$ODI_HOME/oracledi/client/ide/bin/ide.conf

  AddVMOption - XmxNNNNM

  AddVMOption - XmsNNNNM

  Where NNNN is a higher value.

• How to play a project item in the source via ExtendScript monitor

  Let's say you select the following item:

  ThisItem=app.project.rootItem.children[2];

  I am trying to achieve something along the lines of...

  sourceMonitor.loadItem(ThisItem);
  sourceMonitor.play();
  

  Is there a way to do using ExtendScript?

  There is no API publicly supported for do this in ExtendScript.

• I've implemented all the information for an email from the Charter and then when I click on get mail, it says there is a connection to the server error... Why?

  I've implemented all the information for an email from the Charter and then when I click on get mail, it says there is a connection to the server error... Why?

  Hello ChevyDriver10,

  Thanks for your post.  What email app do you use to receive your mail?

  In the meantime, take a look at the Charter of General electronic installation instructions.

  If you do not currently have an e-mail client, feel free to go on Windows Live Mail.

  See you soon

• Hello. Where can I get documentation for HP Capture and the road? As a user/administrator's guide?

  Hello. Where can I get documentation for HP Capture and the road? As a user/administrator's guide? I recently installed a trial version, but he did not come all documentation.

  little late? ;-)

  Seems many is research. Look at

  http://h20000.www2.HP.com/bizsupport/TechSupport/DocumentIndex.jsp?ContentType=SupportManual&lang=en&cc=us&docIndexId=64179&TaskID=135&prodTypeId=457757&prodSeriesId=5260445

• Composite video is not showing is not on the Source and program monitors

  Update Premiere Pro CC 2014 to v8.1 on my Mac Pro running OS X 10.9.5

  When the conversion and loading of a project that worked very well in the last version of first Pro CC 2014, the source and program monitors refuse to display video.  Why? It's terribly frustrating!

  Information on Mac:

  Mac Pro - 2 x 2.4 Quad-Core

  24 GB RAM

  2 x ATI Radeon HD 5770

  Mark thank you for answering my question.

  I ended up having to create a new project, select the the CPU processing, the old CPU project and Recheck in my preferences to import.  Unfortunately this update cost me 2 hours of time to fix as well for me and my client. Not impressed.

• When I opened a new web page, it loads in the previously used tab, why?

  When I opened a new web page, it loads in the previously used tab. It did not used to do this.

  I do a search on google for example, when I opened what I'm looking for, the previous tab disappears and is REPLACED by the following, it is not how I try to go to another destination, Firefox uses the current tab... bloody annoying!

• Where to find information about all Tables of the Source for Oracle EBS

  Hi all
  
  We strive to implement Oracle EBS R12.1.3 with analytics (OBIEE11g).
  
  Currently, we need to know all the sources (Oracle EBS) Tables for the following modules:
  
  1. supply chain and order management Analytics
  2. purchases & move analytical
  3 finance Analytics
  
  We have searched in Google, could not find any information.
  
  Can anyone share a document link that can provide some information about it?
  
  Thanks in advance
  
  Concerning
  Nathalie

  1. production & order management Analytics
  All the major paintings in inventory (Articles, categories, onhand, operations), order management (headers, lines, clients, types of orders, deliveries), WIP (work, work order requirements, operations orders)
  2. purchases & move analytical
  All the main tables in shopping (po_headers, po_lines, shipments, suppliers, receipts, invoice headers, distributions, the invoice),
  3 finance Analytics
  All the big tables of AP, AR, GL

  Analytics extract data from a large number of tables. (hundreds, if not thousand)
  I'm curious to know what you do with this information.

  Sandeep Gandhi

• BlackBerry Smartphones Can I retrieve contact information for a database without the BlackBerry

  This is my story - a couple of weeks, I dropped my 8130 Pearl in a large cup of water. After miraculously, he came back to life, I decided that it was time to SAVE my contact... information so I used the version of the office for 4.3.0.17 Manager do... Only, I clicked on "Addresses", which I guess means contacts. I joke that my poor BlackBerry not - the VERY NEXT DAY, went into the pool with me. Now, despite the fact that I just mentioned after swimming, I actually do not lead a lavish lifestyle... I live in the desert, and I had to enter my poor toddler, overheated in the pool as soon as possible. I have no cell phone insurance, but I don't have the $50 deductible to get a new BlackBerry. Now I use a Casio g opportunity ' Boulder area. I had so much contact info, I need. So, here is my question. Is there a way to convert information database (IPD file) I saved in a word document, or other legible form so I can get all my contacts?

  Thank you in advance,

  Crystal

  Crystal, Hello and welcome to the Forums of Support BlackBerry.com.

  Yes, google search for ABC Amber IPD Converter and use it. It is not free, but the trial software will manage a limited number of records.

  If you end up having a new BlackBerry, you can restore this backup IPD file on your new device.

• Media Player 11 has ceased to recognize the media information for any CD in the drive - can it be fixed?

  Media Player 11.0.6002.18311 has ceased to recognize the information on the media for any CD in the drive, even for those it has previously "known".  Also, it does not update media information, even when I manually to find the news media.  Is it possible to reset the media player or uninstall it please?  Thank you, Ralph (UK).

  Hi Raoul,.

  the manual update must have worked in discovering that the CCGD website is down.

  I advise to use the link below to post in the community of Windows Experts. As the title suggests, this community manages more advanced issues.

  http://experts.Windows.com/FRMS/default.aspx

  calculation of the happy,

  B Eddie

• Where can I get help for a problem with the language?

  I have 3 languages installed on this computer. It worked fine last night, but today it will not switch between them. Where can I get support for this problem? Thank you!

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner

• "Dependencies" tab shows all the information for a version of the selected table 4.0

  Hello

  I work with SQL Developer 4.0.0.13. I can see 20 tables in the list. When I select a table to the tabs on the right side, I can see the information for the 'columns' and 'data' and 'constraints' and 'index'... but the "Dependencies" tab does not display an information about references between this table and other tables in the schema.

  Oracle database is v11.2

  Can you please tell me what should I do to see the information on the tab "Dependencies" for a table?

  Thank you

  Milan

  The page dependencies in the object editor reflects the content of the window to ALL_DEPENDENCIES - I don't think includes FKs.

  Since the DOCS

  ALL_DEPENDENCIESDescribes the dependencies among procedures, packages, functions, package bodies and triggers available to the current user, including dependencies on views created without database links. This view does not display the SCHEMAID column.

• Loading of the data using the ODI Crores

  Hi Experts,
  
  I'm loading data 16.5 crores from source to target with in the only Oracle DB (for source and target Ihave two different schemas) and the target tablespace have 180 GB, whereas I am running using the ODI interface, found the extension tablespace TEMPerror. but I did not have enough space to increase the TEMp tablespace in my PB.
  Please help me any other solution to solve the same.
  
  Thank you in advance,
  
  Kind regards
  Chaitanya.

  Hi Chaitanya,

  Please add separate column (column sequence number) in the source table and retrieve the data with the sequence number and apply the index on the sequence column.
  Add the filter to the sequence column condition in interface and run the interface in order to transmit the data between the source and target wise bouquet

  for example: Add the command to the filter condition and transmit values like below

  Command: sequnce_column_name between 1 and 100000

  sequnce_column_name later between 100001 and 1000000 next sequnce_column_name between 1000001 and 10000000

  Continue to run based on the calculation of your previous run time

  It will be the word incase there no column of date as lupdated_date, created_date, created_by and updated_by

  Kind regards
  Phanikanth

• Button controls in the Source and program monitor

  I'm on a Win7 Professional 64 bit HP workstation, and since version 7.01 of first, the program and the Source buttons do not work.  Can add markers with the command "Add markers" "sequence".  Play, pause, fast-forward etc do not work from the buttons.  All access keys work, but the buttons are not.  Somebody else confirm?

  see you soon,

  Well that's not fair. You can try your prefs on launch of compensation. During the first loading, press Shift + Alt keys until the Welcome screen appears.

  Peter Garaway

  Adobe

  Premiere Pro

• Apply the Style to the table using Extendscript CC cell text

  Hello

  I have the following code. I try to scan a document and a specific keyword research based on the regex. That part works. I then get the range of text for those keywords and the highlighted text. This method works. What does not work, it is when I try to do the same in the text that is in a table cell.

  #target framemaker
  
  var doc = app.ActiveDoc;
  var totalPgfs = 0;
  
  var pgf = doc.MainFlowInDoc.FirstTextFrameInFlow.FirstPgf;
  
  function do_table_work(pgf){
      var result = pgf.GetText(Constants.FTI_TblAnchor);
      var all_text = '';
      for (var i = 0; i < result.length; i += 1) {
          var t_object = result[i].obj;
          var t_cell = t_object.FirstRowInTbl.FirstCellInRow;
          while(t_cell.ObjectValid()){
              var cell_items = t_cell.GetText(Constants.FTI_String);
              var tr = new TextRange();
               tr.beg.obj = tr.end.obj = pgf;
  
  
               tr.beg.offset = 0; //this is built dynamically
               tr.end.offset = 7; //this is built dynamically
  
              apply_char_format(text_range)
              t_cell = t_cell.NextCellInTbl;
          }
      }
  }
  
  function apply_char_format(text_range, name) {
      var color = doc.GetNamedColor(name);
      if (color.ObjectValid()) {
          var set_val = new TypedVal();
          set_val.valType = Constants.FT_Integer;
          set_val.ival = true;
          doc.SetTextVal(text_range, Constants.FP_UseBkColor, set_val);
  
  
          set_val.valType = Constants.FT_Id;
          set_val.obj = color;
          doc.SetTextVal(text_range, Constants.FP_BkColor, set_val);
      } else {
          alert('Color does not exist');
      }
  }
  
  while (pgf.ObjectValid()) {
      do_table_work(pgf);
      pgf = pgf.NextPgfInFlow;
  }
  

  The problem is that it is not highlighting the text in the table cell as I want it. If I process the document and use the following syntax:

  var result = pgf.GetText(Constants.FTI_String);
  

  It will highlight the text (with extra code to loop through these results).

  Any thoughts on what I'm missing?

  Hi Green,

  I don't have time to debug this script completely, but I see things that seem unusual.

  1. var result is TFP. GetText (Constants.FTI_TblAnchor);
  2. var all_text = ";
  3. for (var i = 0; i)< result.length;="" i="" +="1)">
  4. var t_object = .obj result [i];
  5. var t_cell is t_object. FirstRowInTbl.FirstCellInRow;
  6. While (t_cell. {ObjectValid()})
  7. var cell_items is t_cell. GetText (Constants.FTI_String);
  8. var b = new TextRange();
  9. TR. Beg.obj = tr.end.obj = bmp;

  GetText() is valid for a table cell, I don't know if that's what you want. I think I want to explore the individual paragraphs. I'm not quite clear on what this code does do exactly, but it seems that this would make it much easier to implement the text ranges. GetText() will cover all the paragraphs in a cell, if there are several.

  Added to this, your line "tr.beg.obj = tr.end.obj = bmp;" makes no sense to me, because you're coming back the paragraph which contained the anchor point of the table. In other words, you just leave the table entirely.

  So it's just a few riddles, but it seems more likely that you would something along these lines:

  1. var t_cell is t_object. FirstRowInTbl.FirstCellInRow;
  2. While (t_cell. {ObjectValid()})
  3. var cellPgf is t_cell. FirstPgf;
  4. var cell_items = cellPgf.GetText (Constants.FTI_String);
  5. var b = new TextRange();
  6. TR. Beg.obj = tr.end.obj = cellPgf;

  Hope this helps some.

  Russ