Tecra A3X - Intermittent display problem

Similar Questions

• HP Pavilion TouchSmart 23-f280: No. Intermittent display problem

  Hi guys,.

  Need your help with this new pc HP Pavilion TouchSmart 23-f280d all-in-one desktop PC.

  all newly purchased this product and had no problem to display but not to start the computer. It will happen only once I used as watch videos or whatever it is around 10 minutes to 20 minutes and the display will be switched off the sound always playing in the background. Later I just be like around a few minutes, then it will be back to normal. but sometimes, when this problem occurs, I tried to leave about an hour but goes blank display.

  Please help me to get the solution on this issue.

  Hello @ali_je24,

  I understand that you have a display problem intermittent with your new HP Pavilion TouchSmart 23-f280d all-in-one desktop PC. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html. As with any new unit you want to ensure that all issues are dealt with properly and that they are properly documented.

  I want to thank you for display on the HP Forums. Have a great day!

• Tecra M3: FBCF display problem

  Anyone having a problem with FBCF screens? My screen, after a very intensive use of the FBCF utility, gives permanent signs of many in the correspondence of the smaller rectangles FBCF. It looks very bad! It seems to be dirty!

  Who can help me?

  Hi Paolo

  I really put t help. TOSHIBA FBCF LCD is a function that allows the user to control the angle of vision of the PC screen making it difficult to see from the side or from other angles in diagonals. When this feature is enabled, anyone viewing the screen of the PC on the side or diagonal angles will see checkerboard on the surface of the screen. The text or the content on the screen are hidden (to avoid watching them a unauthorized).

  There are two modes: ON or OFF. If this works correctly I really don t know what can be the problem.

• Can I put an external resolution 1440 x 900 on Tecra A3X

  Hello

  can I put a 19 Dell 1908WFP Ultra strong (1440 x 900) on a Tecra A3x position monitor interface?
  It's a wide screen, and must be run on the resolution of 1440 x 900.

  I have to make a presentation in England and cannot test it because the monitor is here.
  The documentation says that you run a monitor station 1600 X 1200 with 16 colors, but what is widescreen? These modes are listed?

  I hope someone can help because I don't want to stay here and my presentation is cut or with black borders.

  Thank you very much

  Bjoern

  Hello

  I don t think you will be able to use the resolution of the widescreen 1440 x 900 on the external monitor.
  I downloaded the user manual and there you can find the info that these resolutions are supported:
  1024 x 768
  1280 x 1024
  1400 x 1050
  1600 x 1200
  1920 x 1200

  In addition, a high-resolution external monitor connected to the Tecra A3X can display up to 1600 x 1200.
  But you should also know that even if the chip of the graphics card would support the wide screen resolution, you would not be able to choose 1440 x 900 if the graphics card driver could not support this resolution.

• Tecra S1 display problem

  Unfortnately my tecra s1 hit the table of coffee on the ground, the screen immediately turned white. When I rebooted there was no display at all (black only)
  The computer works as I plugged on a screen external and that was very good. I tried to follow various troubleshooting guides online showing how to disassemble the laptop and reinstall the connector of the display on the motherboard, but this did not remedy the problem.

  I noticed coming from the display was a big bunch of wires going into a connector that I reinstalled, on the right hand side of the screen is a white and black wire to a connector and a pink wire that seemed to just float, I couldn't not whence he came. Does anyone have ideas on the subject of this thread or other tips that can help me.

  Thanks in advance

  Hello

  Unfortunately, mate, you won't find any manual disassembly here on the pages of Toshiba. These manuals are not for use public and designed only for the FSA.
  But I think you could google a bit and you should find a few details.

  I think that it is a display problem that I doubt that some loose cables could cause this problem
  In my view, the screen is broken and needs to be replaced
  To do this, you should get in touch with your technician ASP.

  Good luck

• Tecra M3 dark display, checked the usual problems

  Hello

  My M3 went dark, it flickered on and off for about a week and then completely dark. I still work if I get the right angle and an external monitor is fine.

  If haven't tried a new cable from the screen, no difference and a new inverter, also no difference.

  Sometimes if I switch between views (Fn + F5) I can get the display works fine, but as soon as the screen is turned off for some reason it won't once again.

  I also re-greased the heatsink on the NVidia chip.

  And I checked the backlight by plugging a converter working on another laptop.

  I have a M1 and there is a relay type sound when something has changed on the screen, I can't remember if the M3 never makes a similar sound, even if I used it for about 5 years.

  I also saw that he suggested that he might think that the cover is closed, I don't know how the M3 detects that the lid is closed.

  Any suggestion or help would be welcome.

  > My M3 went dark, it flickered on and off for about a week and then completely dark. I still work if I get the right angle and an external monitor is fine.

  This means that the graphics card chip was Ok, which means that it could be a display problem
  I doubt that it ups s related question. If FL inverter would be defective, then you'd see everything on the screen, but everything would be visible behind a thick fog.

  Of course, it s that my personal opinion and nobody would be able to tell what dysfunction part without running any hardware, test procedures
  Then maybe you should ask a support technician

• Tecra A3X-112: Fn + F1... Touch pad to work stoppage

  Hello everyone,

  I have a Tecra A3X-112 on which Windows XP has been recently reinstalled.
  I installed Windows XP before with other different copies, but this is the first time that I've known a few misadjustments.

  My problem is that the combined with F1, F2... Fn keys stopped working, as well as Assist bottom on top of the keyboard.
  In addition, the touchpad works, but I cannot turn it off.

  I've been looking at the posts of some other users, and it seems that it is a problem to download the proper drivers from Toshiba Web page.

  My question is: what drivers for the keys?

  a. for * Fn + function keys * should I intalled * utilities * or * Hotkeys utility for display devices? * There are even some users who recommend to installed a BIOS update or a common Module driver, but I'm not sure about this. By installing the appropriate driver, are all combinations FN + function keys work, or only some of them?
  b. for * Touch Pad *, should I intalled only * Touch Pad on / off utility * or * Touch Pad Driver * is also necessary?
  c. for * help the bottoms? *

  Send me the answers, please.
  Thanks in advance for your help.

  Hello

  The features of FN keys depend on several different factors. As a first step, it is important to have installed common modules. She is named for the other Toshiba designed tools and utilities.
  Just for example: for the use of the keys FN + F2 (standby power options), you need to install modules common and tool watch.
  While the first step I recommend to install common modules again.
  When you are finished, check the functionality of the FN and post the result.

  For FN + F9, you need to install TOSHIBA Touch Pad on / off Utility. Before that, it must be installed ALPS Pointing - device Driver.
  You know, it's not easy to simply offer a solution to this. All the drivers, tools and utilities must be installed in order to good facilities. After having done that, everything should work well.

  One thing, to help buttons try with TOSHIBA controls again.

• Need driver WiFi for my Tecra A3X

  Hi, could someone help me find the right driver for the pilot without wireless/wifi on my Toshiba Tecra A3X.

  Model No.PTA3XE - 01C00PEN

  SERIES NO. 56042981 H

  I use Windows XP.

  Thank you.

  No problem.
  Go to: http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Choose:
  -Archives
  Tecra-
  -Tecra a series
  -Tecra A3X
  -PTA3XE
  -Win XP

  Now, you will get all the drivers for this laptop model

• Tecra A3x HDD issues

  Hello
  I can access is no longer the HD - I knew it was on the cards as the laptop had been rather erratic has over the past two months. Now, whenever I turn it on, the hard drive makes a rattle noise.
  So I guess I'll have to share that is not a problem.

  Could someone point me in the right direction in sourcing a suitable replacement?

  Thank you!

  You bought a SATA HDD and it won't.

  Alphaleader describes exactly what you need.
  * You need an IDE (ATA) HDD.*

  ATA is _not_ the same as SATA but it s an IDE interface.

  Therefore, search for IDE hard disks.

  Tecra A3X seems to be equipped with different HARD drive sizes; 40 GB, 60 GB, 80 GB.
  I think you could use a 100 GB HARD drive; Maybe a 120 GB HARD drive too

  Best regards

• Tecra A3x hangs at "Setup starts windows" during the XP installation

  Hi again
  I posted another thread on this laptop. This question was cured by adjusting the correct CPU.

  So, now everything seems fine. Everything seems to work except very well.
  During the installation of XP, the drivers all will charge them and then we get the text 'Setup starts windows' the lower left of the screen.
  It does not further, just sitting there.

  I googled this problem and read many old threads on the subject, I went to the Microsoft website too.
  So far I tried (on the basis of these old threads)

  Different installation discs
  Different memory
  Disable (in bios) that anything not reqd such as Lan
  Reset the default bios settings
  You press F5 when invited to press F6 for scsi drivers. From there, I tried different setting options.

  The current bios is 1.30, I understand there is a update available for 1.4 but it is a basic installation Win rather than back may be done without THAT installed XP.

  Suggestions for what the problem maybe?

  Hello

  What version of Win XP you try? Win XP contains the SP3?
  Please include to the Win XP SP3 using a tool called nLite and then try to reinstall Win XP.

  AFAIK the Tecra A3x support a common IDE HDD so no driver RAID or SATA is necessary.

  You can also check the HDD of the Tecra.
  Use the tool called Drive Fitness Test to test the HARD drive

  Good luck

• Update BIOS on Tecra A3X

  I have Vista Business running fine with all this work and I want to update my Bios Version 1.20 at latest.
  Whenever I have to search for updates, the only one that appears is bios - 20070709164832.zip and it says:
  Update the BIOS of 07/09/07
  This Bios update adds functionality to your system.
  When the computer comes on, the BIOS is launched to perform various functions to start.)
  For more detailed updated information, please see the Information update BIOS Toshiba
  Tecra A3X 1, 40 - WIN Toshiba.
  When I run as they explain the link, it gives a stupid error:

  [Error] BIOS update is not supported for operating system. Is an operating system or Service Pack is installed. ?!?!?!

  How can I get close to it.

  Thanks in advance.

  Hello

  I think the problem is that the update of the bios (which is using windows) doesn't work under XP, so won´t you luck because it takes a working XP and common modules installed on your machine.

  Unfortunately there is no other way to update your bios, but in your case it s is NOT necessary update the bios since the new version adds not important functions. So I think that it s not a BIG problem, and if your computer is running well, then ' that one ' and follow the good old "never change a system up and running.

  Welcome them

• TECRA S1: No display

  Hello

  I have been using my TECRA S1 for awhile. It worked fine with no problems until at some point when I start the pc it didn't display.

  I tried to check on the LCD cable. I have Plug and then plug it in. When I start the pc again I could see the display, but only for a few minutes, then windows XP hanged.

  When I rebooted the pc the no display problem occurred again.

  The rom cd and CPU fan works. The disk hard led will blink twice when starting, but I don't think that it was able to read the hard drive.

  I also checked my RAM modules are works fine with a different toshiba pc.

  What could be the problem?

  Hello

  Sorry, but your ad is a bit confused.
  Do you have a problem with the display of the computer laptop or external display?
  If you have the external display to malfunction please check the display properties.
  In addition, if the operating system suspended every time, you can try to recover the operating system with the recovery CD. But first, you should make a backup of your system.

  Good bye

• There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  There seems to be a display problem. Please check that your monitor is HDCP and is not mirrored by using Airplay.

  Apparently, you're trying to use AirPlay to display content that is protected in a way that not only allows the copy.

• Retina MBP display problems

  I vaguely remember that there is a kind of reminder for display problems on some models of MacBook Pro retina. I don't remember the nature of the issue, nor the accurate models who were eligible. I have a 15-inch model, end of 2013, and what I see is pictured below (dead pixels). Can anyone remember if there was a recall and that this issue would be covered?

  

  2011-2013 models.

  To my knowledge the retinas did not have a reminder. However, I got my rMBP 2012 15 "screen changed due to ghosting. I do not know if Apple which is still.

• In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  In the visualization of my photos display problem: I have red spots in different parts of the pictures. Someone knows how to fix this?  I rebooted my MacBook Pro, but it does not solve the problem.

  Details please

  What version of Aperture? Is OS X 10.7.5 as you say correct for your OS? You shoot JPEG or RAW? If RAW device? Wharton has changed since this worked?

  LN